# Common support
-obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o
+obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o
obj-$(CONFIG_MXS_OCOTP) += ocotp.o
obj-$(CONFIG_PM) += pm.o
+++ /dev/null
-/*
- * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * Based on code from Freescale,
- * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <asm-generic/bug.h>
-
-#include "gpio.h"
-
-static struct mxs_gpio_port *mxs_gpio_ports;
-static int gpio_table_size;
-
-#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10)
-#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10)
-#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10)
-#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10)
-#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10)
-#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10)
-#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10)
-#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10)
-
-#define GPIO_INT_FALL_EDGE 0x0
-#define GPIO_INT_LOW_LEV 0x1
-#define GPIO_INT_RISE_EDGE 0x2
-#define GPIO_INT_HIGH_LEV 0x3
-#define GPIO_INT_LEV_MASK (1 << 0)
-#define GPIO_INT_POL_MASK (1 << 1)
-
-/* Note: This driver assumes 32 GPIOs are handled in one register */
-
-static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index)
-{
- __mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id));
-}
-
-static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index,
- int enable)
-{
- if (enable) {
- __mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id));
- __mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id));
- } else {
- __mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id));
- }
-}
-
-static void mxs_gpio_ack_irq(struct irq_data *d)
-{
- u32 gpio = irq_to_gpio(d->irq);
- clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f);
-}
-
-static void mxs_gpio_mask_irq(struct irq_data *d)
-{
- u32 gpio = irq_to_gpio(d->irq);
- set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0);
-}
-
-static void mxs_gpio_unmask_irq(struct irq_data *d)
-{
- u32 gpio = irq_to_gpio(d->irq);
- set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1);
-}
-
-static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset);
-
-static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
-{
- u32 gpio = irq_to_gpio(d->irq);
- u32 pin_mask = 1 << (gpio & 31);
- struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
- void __iomem *pin_addr;
- int edge;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- edge = GPIO_INT_RISE_EDGE;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- edge = GPIO_INT_FALL_EDGE;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- edge = GPIO_INT_LOW_LEV;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- edge = GPIO_INT_HIGH_LEV;
- break;
- default:
- return -EINVAL;
- }
-
- /* set level or edge */
- pin_addr = port->base + PINCTRL_IRQLEV(port->id);
- if (edge & GPIO_INT_LEV_MASK)
- __mxs_setl(pin_mask, pin_addr);
- else
- __mxs_clrl(pin_mask, pin_addr);
-
- /* set polarity */
- pin_addr = port->base + PINCTRL_IRQPOL(port->id);
- if (edge & GPIO_INT_POL_MASK)
- __mxs_setl(pin_mask, pin_addr);
- else
- __mxs_clrl(pin_mask, pin_addr);
-
- clear_gpio_irqstatus(port, gpio & 0x1f);
-
- return 0;
-}
-
-/* MXS has one interrupt *per* gpio port */
-static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
-{
- u32 irq_stat;
- struct mxs_gpio_port *port = (struct mxs_gpio_port *)irq_get_handler_data(irq);
- u32 gpio_irq_no_base = port->virtual_irq_start;
-
- desc->irq_data.chip->irq_ack(&desc->irq_data);
-
- irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) &
- __raw_readl(port->base + PINCTRL_IRQEN(port->id));
-
- while (irq_stat != 0) {
- int irqoffset = fls(irq_stat) - 1;
- generic_handle_irq(gpio_irq_no_base + irqoffset);
- irq_stat &= ~(1 << irqoffset);
- }
-}
-
-/*
- * Set interrupt number "irq" in the GPIO as a wake-up source.
- * While system is running, all registered GPIO interrupts need to have
- * wake-up enabled. When system is suspended, only selected GPIO interrupts
- * need to have wake-up enabled.
- * @param irq interrupt source number
- * @param enable enable as wake-up if equal to non-zero
- * @return This function returns 0 on success.
- */
-static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
-{
- u32 gpio = irq_to_gpio(d->irq);
- u32 gpio_idx = gpio & 0x1f;
- struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
-
- if (enable) {
- if (port->irq_high && (gpio_idx >= 16))
- enable_irq_wake(port->irq_high);
- else
- enable_irq_wake(port->irq);
- } else {
- if (port->irq_high && (gpio_idx >= 16))
- disable_irq_wake(port->irq_high);
- else
- disable_irq_wake(port->irq);
- }
-
- return 0;
-}
-
-static struct irq_chip gpio_irq_chip = {
- .name = "mxs gpio",
- .irq_ack = mxs_gpio_ack_irq,
- .irq_mask = mxs_gpio_mask_irq,
- .irq_unmask = mxs_gpio_unmask_irq,
- .irq_set_type = mxs_gpio_set_irq_type,
- .irq_set_wake = mxs_gpio_set_wake_irq,
-};
-
-static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset,
- int dir)
-{
- struct mxs_gpio_port *port =
- container_of(chip, struct mxs_gpio_port, chip);
- void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id);
-
- if (dir)
- __mxs_setl(1 << offset, pin_addr);
- else
- __mxs_clrl(1 << offset, pin_addr);
-}
-
-static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct mxs_gpio_port *port =
- container_of(chip, struct mxs_gpio_port, chip);
-
- return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1;
-}
-
-static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct mxs_gpio_port *port =
- container_of(chip, struct mxs_gpio_port, chip);
- void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id);
-
- if (value)
- __mxs_setl(1 << offset, pin_addr);
- else
- __mxs_clrl(1 << offset, pin_addr);
-}
-
-static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct mxs_gpio_port *port =
- container_of(chip, struct mxs_gpio_port, chip);
-
- return port->virtual_irq_start + offset;
-}
-
-static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- mxs_set_gpio_direction(chip, offset, 0);
- return 0;
-}
-
-static int mxs_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- mxs_gpio_set(chip, offset, value);
- mxs_set_gpio_direction(chip, offset, 1);
- return 0;
-}
-
-int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt)
-{
- int i, j;
-
- /* save for local usage */
- mxs_gpio_ports = port;
- gpio_table_size = cnt;
-
- pr_info("MXS GPIO hardware\n");
-
- for (i = 0; i < cnt; i++) {
- /* disable the interrupt and clear the status */
- __raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i));
- __raw_writel(0, port[i].base + PINCTRL_IRQEN(i));
-
- /* clear address has to be used to clear IRQSTAT bits */
- __mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i));
-
- for (j = port[i].virtual_irq_start;
- j < port[i].virtual_irq_start + 32; j++) {
- irq_set_chip_and_handler(j, &gpio_irq_chip,
- handle_level_irq);
- set_irq_flags(j, IRQF_VALID);
- }
-
- /* setup one handler for each entry */
- irq_set_chained_handler(port[i].irq, mxs_gpio_irq_handler);
- irq_set_handler_data(port[i].irq, &port[i]);
-
- /* register gpio chip */
- port[i].chip.direction_input = mxs_gpio_direction_input;
- port[i].chip.direction_output = mxs_gpio_direction_output;
- port[i].chip.get = mxs_gpio_get;
- port[i].chip.set = mxs_gpio_set;
- port[i].chip.to_irq = mxs_gpio_to_irq;
- port[i].chip.base = i * 32;
- port[i].chip.ngpio = 32;
-
- /* its a serious configuration bug when it fails */
- BUG_ON(gpiochip_add(&port[i].chip) < 0);
- }
-
- return 0;
-}
-
-#define MX23_GPIO_BASE MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR)
-#define MX28_GPIO_BASE MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR)
-
-#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id) \
- { \
- .chip.label = "gpio-" #_id, \
- .id = _id, \
- .irq = _irq, \
- .base = _base, \
- .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \
- }
-
-#ifdef CONFIG_SOC_IMX23
-static struct mxs_gpio_port mx23_gpio_ports[] = {
- DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0),
- DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1),
- DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2),
-};
-
-int __init mx23_register_gpios(void)
-{
- return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports));
-}
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-static struct mxs_gpio_port mx28_gpio_ports[] = {
- DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0),
- DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1),
- DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2),
- DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3),
- DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4),
-};
-
-int __init mx28_register_gpios(void)
-{
- return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports));
-}
-#endif
+++ /dev/null
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MXS_GPIO_H__
-#define __MXS_GPIO_H__
-
-struct mxs_gpio_port {
- void __iomem *base;
- int id;
- int irq;
- int irq_high;
- int virtual_irq_start;
- struct gpio_chip chip;
-};
-
-int mxs_gpio_init(struct mxs_gpio_port*, int);
-
-#endif /* __MXS_GPIO_H__ */
#include <mach/iomux-mx28.h>
#include "devices-mx28.h"
-#include "gpio.h"
#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13)
#define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15)
help
Say yes here to support Samsung Exynos4 series SoCs GPIO library
+config GPIO_MXS
+ def_bool y
+ depends on ARCH_MXS
+
config GPIO_PLAT_SAMSUNG
bool "Samsung SoCs GPIO library support"
default y if SAMSUNG_GPIOLIB_4BIT
obj-$(CONFIG_GPIO_BASIC_MMIO_CORE) += basic_mmio_gpio.o
obj-$(CONFIG_GPIO_BASIC_MMIO) += basic_mmio_gpio.o
obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o
+obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o
obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o
obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o
--- /dev/null
+/*
+ * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * Based on code from Freescale,
+ * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <asm-generic/bug.h>
+
+static struct mxs_gpio_port *mxs_gpio_ports;
+static int gpio_table_size;
+
+#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10)
+#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10)
+#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10)
+#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10)
+#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10)
+#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10)
+#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10)
+#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10)
+
+#define GPIO_INT_FALL_EDGE 0x0
+#define GPIO_INT_LOW_LEV 0x1
+#define GPIO_INT_RISE_EDGE 0x2
+#define GPIO_INT_HIGH_LEV 0x3
+#define GPIO_INT_LEV_MASK (1 << 0)
+#define GPIO_INT_POL_MASK (1 << 1)
+
+struct mxs_gpio_port {
+ void __iomem *base;
+ int id;
+ int irq;
+ int irq_high;
+ int virtual_irq_start;
+ struct gpio_chip chip;
+};
+
+/* Note: This driver assumes 32 GPIOs are handled in one register */
+
+static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index)
+{
+ __mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id));
+}
+
+static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index,
+ int enable)
+{
+ if (enable) {
+ __mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id));
+ __mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id));
+ } else {
+ __mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id));
+ }
+}
+
+static void mxs_gpio_ack_irq(struct irq_data *d)
+{
+ u32 gpio = irq_to_gpio(d->irq);
+ clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f);
+}
+
+static void mxs_gpio_mask_irq(struct irq_data *d)
+{
+ u32 gpio = irq_to_gpio(d->irq);
+ set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0);
+}
+
+static void mxs_gpio_unmask_irq(struct irq_data *d)
+{
+ u32 gpio = irq_to_gpio(d->irq);
+ set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1);
+}
+
+static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset);
+
+static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
+{
+ u32 gpio = irq_to_gpio(d->irq);
+ u32 pin_mask = 1 << (gpio & 31);
+ struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
+ void __iomem *pin_addr;
+ int edge;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ edge = GPIO_INT_RISE_EDGE;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ edge = GPIO_INT_FALL_EDGE;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ edge = GPIO_INT_LOW_LEV;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ edge = GPIO_INT_HIGH_LEV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* set level or edge */
+ pin_addr = port->base + PINCTRL_IRQLEV(port->id);
+ if (edge & GPIO_INT_LEV_MASK)
+ __mxs_setl(pin_mask, pin_addr);
+ else
+ __mxs_clrl(pin_mask, pin_addr);
+
+ /* set polarity */
+ pin_addr = port->base + PINCTRL_IRQPOL(port->id);
+ if (edge & GPIO_INT_POL_MASK)
+ __mxs_setl(pin_mask, pin_addr);
+ else
+ __mxs_clrl(pin_mask, pin_addr);
+
+ clear_gpio_irqstatus(port, gpio & 0x1f);
+
+ return 0;
+}
+
+/* MXS has one interrupt *per* gpio port */
+static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+ u32 irq_stat;
+ struct mxs_gpio_port *port = (struct mxs_gpio_port *)irq_get_handler_data(irq);
+ u32 gpio_irq_no_base = port->virtual_irq_start;
+
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+
+ irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) &
+ __raw_readl(port->base + PINCTRL_IRQEN(port->id));
+
+ while (irq_stat != 0) {
+ int irqoffset = fls(irq_stat) - 1;
+ generic_handle_irq(gpio_irq_no_base + irqoffset);
+ irq_stat &= ~(1 << irqoffset);
+ }
+}
+
+/*
+ * Set interrupt number "irq" in the GPIO as a wake-up source.
+ * While system is running, all registered GPIO interrupts need to have
+ * wake-up enabled. When system is suspended, only selected GPIO interrupts
+ * need to have wake-up enabled.
+ * @param irq interrupt source number
+ * @param enable enable as wake-up if equal to non-zero
+ * @return This function returns 0 on success.
+ */
+static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
+{
+ u32 gpio = irq_to_gpio(d->irq);
+ u32 gpio_idx = gpio & 0x1f;
+ struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
+
+ if (enable) {
+ if (port->irq_high && (gpio_idx >= 16))
+ enable_irq_wake(port->irq_high);
+ else
+ enable_irq_wake(port->irq);
+ } else {
+ if (port->irq_high && (gpio_idx >= 16))
+ disable_irq_wake(port->irq_high);
+ else
+ disable_irq_wake(port->irq);
+ }
+
+ return 0;
+}
+
+static struct irq_chip gpio_irq_chip = {
+ .name = "mxs gpio",
+ .irq_ack = mxs_gpio_ack_irq,
+ .irq_mask = mxs_gpio_mask_irq,
+ .irq_unmask = mxs_gpio_unmask_irq,
+ .irq_set_type = mxs_gpio_set_irq_type,
+ .irq_set_wake = mxs_gpio_set_wake_irq,
+};
+
+static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset,
+ int dir)
+{
+ struct mxs_gpio_port *port =
+ container_of(chip, struct mxs_gpio_port, chip);
+ void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id);
+
+ if (dir)
+ __mxs_setl(1 << offset, pin_addr);
+ else
+ __mxs_clrl(1 << offset, pin_addr);
+}
+
+static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct mxs_gpio_port *port =
+ container_of(chip, struct mxs_gpio_port, chip);
+
+ return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1;
+}
+
+static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct mxs_gpio_port *port =
+ container_of(chip, struct mxs_gpio_port, chip);
+ void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id);
+
+ if (value)
+ __mxs_setl(1 << offset, pin_addr);
+ else
+ __mxs_clrl(1 << offset, pin_addr);
+}
+
+static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct mxs_gpio_port *port =
+ container_of(chip, struct mxs_gpio_port, chip);
+
+ return port->virtual_irq_start + offset;
+}
+
+static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ mxs_set_gpio_direction(chip, offset, 0);
+ return 0;
+}
+
+static int mxs_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ mxs_gpio_set(chip, offset, value);
+ mxs_set_gpio_direction(chip, offset, 1);
+ return 0;
+}
+
+int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt)
+{
+ int i, j;
+
+ /* save for local usage */
+ mxs_gpio_ports = port;
+ gpio_table_size = cnt;
+
+ pr_info("MXS GPIO hardware\n");
+
+ for (i = 0; i < cnt; i++) {
+ /* disable the interrupt and clear the status */
+ __raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i));
+ __raw_writel(0, port[i].base + PINCTRL_IRQEN(i));
+
+ /* clear address has to be used to clear IRQSTAT bits */
+ __mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i));
+
+ for (j = port[i].virtual_irq_start;
+ j < port[i].virtual_irq_start + 32; j++) {
+ irq_set_chip_and_handler(j, &gpio_irq_chip,
+ handle_level_irq);
+ set_irq_flags(j, IRQF_VALID);
+ }
+
+ /* setup one handler for each entry */
+ irq_set_chained_handler(port[i].irq, mxs_gpio_irq_handler);
+ irq_set_handler_data(port[i].irq, &port[i]);
+
+ /* register gpio chip */
+ port[i].chip.direction_input = mxs_gpio_direction_input;
+ port[i].chip.direction_output = mxs_gpio_direction_output;
+ port[i].chip.get = mxs_gpio_get;
+ port[i].chip.set = mxs_gpio_set;
+ port[i].chip.to_irq = mxs_gpio_to_irq;
+ port[i].chip.base = i * 32;
+ port[i].chip.ngpio = 32;
+
+ /* its a serious configuration bug when it fails */
+ BUG_ON(gpiochip_add(&port[i].chip) < 0);
+ }
+
+ return 0;
+}
+
+#define MX23_GPIO_BASE MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR)
+#define MX28_GPIO_BASE MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR)
+
+#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id) \
+ { \
+ .chip.label = "gpio-" #_id, \
+ .id = _id, \
+ .irq = _irq, \
+ .base = _base, \
+ .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \
+ }
+
+#ifdef CONFIG_SOC_IMX23
+static struct mxs_gpio_port mx23_gpio_ports[] = {
+ DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0),
+ DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1),
+ DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2),
+};
+
+int __init mx23_register_gpios(void)
+{
+ return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports));
+}
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+static struct mxs_gpio_port mx28_gpio_ports[] = {
+ DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0),
+ DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1),
+ DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2),
+ DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3),
+ DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4),
+};
+
+int __init mx28_register_gpios(void)
+{
+ return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports));
+}
+#endif
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff