staging: ft1000: ft1000-usb: ft1000_hw.c: fix long lines

Fix checkpatch.pl warnings about lines longer than 80 characters.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
index e6fb066e0dd23c77acde3c677753a26a7763c13c..e6b5976a09e3bd5e438b13446d894f3566bbbe92 100644 (file)
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
@@ -399,8 +399,8 @@ int dsp_reload(struct ft1000_usb *ft1000dev)
        card_reset_dsp(ft1000dev, 0);
        msleep(1000);
 
-       status =
-               ft1000_write_register(ft1000dev, HOST_INTF_BE, FT1000_REG_SUP_CTRL);
+       status = ft1000_write_register(ft1000dev, HOST_INTF_BE,
+                                      FT1000_REG_SUP_CTRL);
 
        /* Let's check for FEFE */
        status =
@@ -587,8 +587,8 @@ static int ft1000_start_xmit(struct sk_buff *skb, struct net_device *dev)
                goto err;
        }
 
-       pipe =
-               usb_sndbulkpipe(pFt1000Dev->dev, pFt1000Dev->bulk_out_endpointAddr);
+       pipe = usb_sndbulkpipe(pFt1000Dev->dev,
+                              pFt1000Dev->bulk_out_endpointAddr);
        maxlen = usb_maxpacket(pFt1000Dev->dev, pipe, usb_pipeout(pipe));
 
        pdata = (u8 *)skb->data;
@@ -1049,8 +1049,8 @@ static int ft1000_dsp_prov(void *arg)
 
                /* Check if doorbell is available */
                pr_debug("check if doorbell is cleared\n");
-               status =
-                       ft1000_read_register(dev, &tempword, FT1000_REG_DOORBELL);
+               status = ft1000_read_register(dev, &tempword,
+                                             FT1000_REG_DOORBELL);
                if (status) {
                        pr_debug("ft1000_read_register error\n");
                        break;
@@ -1071,9 +1071,8 @@ static int ft1000_dsp_prov(void *arg)
                        pr_debug("*** Provision Data Sent to DSP\n");
 
                        /* Send provisioning data */
-                       ptr =
-                               list_entry(info->prov_list.next, struct prov_record,
-                                          list);
+                       ptr = list_entry(info->prov_list.next,
+                                        struct prov_record, list);
                        len = *(u16 *)ptr->pprov_data;
                        len = htons(len);
                        len += PSEUDOSZ;
@@ -1261,7 +1260,7 @@ static int ft1000_proc_drvmsg(struct ft1000_usb *dev, u16 size)
                        if (tempword & FT1000_DB_DPRAM_TX) {
                                mdelay(10);
                                status = ft1000_read_register(dev, &tempword,
-                                                             FT1000_REG_DOORBELL);
+                                                       FT1000_REG_DOORBELL);
                                if (tempword & FT1000_DB_DPRAM_TX)
                                        break;
                        }
@@ -1295,8 +1294,8 @@ static int ft1000_proc_drvmsg(struct ft1000_usb *dev, u16 size)
                info->DSPInfoBlk[10] = 0x7200;
                info->DSPInfoBlk[11] = htons(info->DSPInfoBlklen);
                status = ft1000_write_dpram32(dev, 0,
-                                             (u8 *)&info->DSPInfoBlk[0],
-                                             (unsigned short)(info->DSPInfoBlklen + 22));
+                               (u8 *)&info->DSPInfoBlk[0],
+                               (unsigned short)(info->DSPInfoBlklen + 22));
                status = ft1000_write_register(dev, FT1000_DB_DPRAM_TX,
                                               FT1000_REG_DOORBELL);
                dev->DrvMsgPend = 0;
@@ -1355,8 +1354,9 @@ static int ft1000_proc_drvmsg(struct ft1000_usb *dev, u16 size)
                        *pmsg++ = convert.wrd;
                        *pmsg++ = htons(info->DrvErrNum);
 
-                       status = card_send_command(dev, (unsigned char *)&tempbuffer[0],
-                                                  (u16)(0x0012 + PSEUDOSZ));
+                       status = card_send_command(dev,
+                                       (unsigned char *)&tempbuffer[0],
+                                       (u16)(0x0012 + PSEUDOSZ));
                        if (status)
                                goto out;
                        info->DrvErrNum = 0;
@@ -1526,7 +1526,7 @@ int ft1000_poll(void *dev_id)
                        usleep_range(9000, 11000);
                        /* Program WMARK register */
                        status = ft1000_write_register(dev, 0x600,
-                                                      FT1000_REG_MAG_WATERMARK);
+                                              FT1000_REG_MAG_WATERMARK);
                        /* clear ASIC reset doorbell */
                        status = ft1000_write_register(dev,
                                                       FT1000_DSP_ASIC_RESET,
@@ -1542,9 +1542,9 @@ int ft1000_poll(void *dev_id)
                                                       FT1000_REG_SUP_CTRL);
                        /* copy dsp session record from Adapter block */
                        status = ft1000_write_dpram32(dev, 0,
-                                                     (u8 *)&info->DSPSess.Rec[0], 1024);
+                                     (u8 *)&info->DSPSess.Rec[0], 1024);
                        status = ft1000_write_register(dev, 0x600,
-                                                      FT1000_REG_MAG_WATERMARK);
+                                              FT1000_REG_MAG_WATERMARK);
                        /* ring doorbell to tell DSP that
                         * ASIC is out of reset
                         * */
@@ -1556,21 +1556,21 @@ int ft1000_poll(void *dev_id)
                        if (!dev->fAppMsgPend) {
                                /* Reset ASIC and DSP */
                                status = ft1000_read_dpram16(dev,
-                                                            FT1000_MAG_DSP_TIMER0,
-                                                            (u8 *)&info->DSP_TIME[0],
-                                                            FT1000_MAG_DSP_TIMER0_INDX);
+                                               FT1000_MAG_DSP_TIMER0,
+                                               (u8 *)&info->DSP_TIME[0],
+                                               FT1000_MAG_DSP_TIMER0_INDX);
                                status = ft1000_read_dpram16(dev,
-                                                            FT1000_MAG_DSP_TIMER1,
-                                                            (u8 *)&info->DSP_TIME[1],
-                                                            FT1000_MAG_DSP_TIMER1_INDX);
+                                               FT1000_MAG_DSP_TIMER1,
+                                               (u8 *)&info->DSP_TIME[1],
+                                               FT1000_MAG_DSP_TIMER1_INDX);
                                status = ft1000_read_dpram16(dev,
-                                                            FT1000_MAG_DSP_TIMER2,
-                                                            (u8 *)&info->DSP_TIME[2],
-                                                            FT1000_MAG_DSP_TIMER2_INDX);
+                                               FT1000_MAG_DSP_TIMER2,
+                                               (u8 *)&info->DSP_TIME[2],
+                                               FT1000_MAG_DSP_TIMER2_INDX);
                                status = ft1000_read_dpram16(dev,
-                                                            FT1000_MAG_DSP_TIMER3,
-                                                            (u8 *)&info->DSP_TIME[3],
-                                                            FT1000_MAG_DSP_TIMER3_INDX);
+                                               FT1000_MAG_DSP_TIMER3,
+                                               (u8 *)&info->DSP_TIME[3],
+                                               FT1000_MAG_DSP_TIMER3_INDX);
                                info->CardReady = 0;
                                info->DrvErrNum = DSP_CONDRESET_INFO;
                                pr_debug("DSP conditional reset requested\n");