--- /dev/null
+CS42L73 audio CODEC
+
+Required properties:
+
+ - compatible : "cirrus,cs42l73"
+
+ - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+ - reset_gpio : a GPIO spec for the reset pin.
+ - chgfreq : Charge Pump Frequency values 0x00-0x0F
+
+
+Example:
+
+codec: cs42l73@4a {
+ compatible = "cirrus,cs42l73";
+ reg = <0x4a>;
+ reset_gpio = <&gpio 10 0>;
+ chgfreq = <0x05>;
+};
\ No newline at end of file
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
int ret;
unsigned int devid = 0;
unsigned int reg;
+ u32 val32;
cs42l73 = devm_kzalloc(&i2c_client->dev, sizeof(struct cs42l73_private),
GFP_KERNEL);
return ret;
}
- if (pdata)
+ if (pdata) {
cs42l73->pdata = *pdata;
+ } else {
+ pdata = devm_kzalloc(&i2c_client->dev,
+ sizeof(struct cs42l73_platform_data),
+ GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&i2c_client->dev, "could not allocate pdata\n");
+ return -ENOMEM;
+ }
+ if (i2c_client->dev.of_node) {
+ if (of_property_read_u32(i2c_client->dev.of_node,
+ "chgfreq", &val32) >= 0)
+ pdata->chgfreq = val32;
+ }
+ pdata->reset_gpio = of_get_named_gpio(i2c_client->dev.of_node,
+ "reset-gpio", 0);
+ cs42l73->pdata = *pdata;
+ }
i2c_set_clientdata(i2c_client, cs42l73);
return 0;
}
+static const struct of_device_id cs42l73_of_match[] = {
+ { .compatible = "cirrus,cs42l73", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, cs42l73_of_match);
+
static const struct i2c_device_id cs42l73_id[] = {
{"cs42l73", 0},
{}
.driver = {
.name = "cs42l73",
.owner = THIS_MODULE,
+ .of_match_table = cs42l73_of_match,
},
.id_table = cs42l73_id,
.probe = cs42l73_i2c_probe,