wl18xx: export pwr_limit_reference_11_abg value as a module parameter

Yet another temporary module parameter requested by the firmware team.
This will be replaced by the conf binary.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>

diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 6baeb26b79c8731d4ee2e65cc314b7ca083b35e3..524f44c4b991e62f51c647b82e11f7299b9f2736 100644 (file)
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -53,6 +53,7 @@ static int low_band_component = -1;
 static int low_band_component_type = -1;
 static int high_band_component = -1;
 static int high_band_component_type = -1;
+static int pwr_limit_reference_11_abg = -1;
 
 static const u8 wl18xx_rate_to_idx_2ghz[] = {
        /* MCS rates are used only with 11n */
@@ -1190,6 +1191,13 @@ int __devinit wl18xx_probe(struct platform_device *pdev)
                priv->conf.phy.high_band_component_type =
                        high_band_component_type;
 
+       if (pwr_limit_reference_11_abg == -1)
+               pwr_limit_reference_11_abg =
+                       priv->conf.phy.pwr_limit_reference_11_abg;
+       else
+               priv->conf.phy.pwr_limit_reference_11_abg =
+                       pwr_limit_reference_11_abg;
+
        if (!checksum_param) {
                wl18xx_ops.set_rx_csum = NULL;
                wl18xx_ops.init_vif = NULL;
@@ -1270,6 +1278,10 @@ module_param(high_band_component_type, uint, S_IRUSR);
 MODULE_PARM_DESC(high_band_component_type, "High band component type: u8 "
                 "(default is 0x09)");
 
+module_param(pwr_limit_reference_11_abg, uint, S_IRUSR);
+MODULE_PARM_DESC(pwr_limit_reference_11_abg, "Power limit reference: u8 "
+                "(default is 0xc8)");
+
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 MODULE_FIRMWARE(WL18XX_FW_NAME);