struct nfsd3_readres *resp)
{
int nfserr;
+ u32 max_blocksize = svc_max_payload(rqstp);
dprintk("nfsd: READ(3) %s %lu bytes at %lu\n",
SVCFH_fmt(&argp->fh),
*/
resp->count = argp->count;
- if (NFSSVC_MAXBLKSIZE < resp->count)
- resp->count = NFSSVC_MAXBLKSIZE;
+ if (max_blocksize < resp->count)
+ resp->count = max_blocksize;
svc_reserve(rqstp, ((1 + NFS3_POST_OP_ATTR_WORDS + 3)<<2) + resp->count +4);
struct nfsd3_fsinfores *resp)
{
int nfserr;
+ u32 max_blocksize = svc_max_payload(rqstp);
dprintk("nfsd: FSINFO(3) %s\n",
SVCFH_fmt(&argp->fh));
- resp->f_rtmax = NFSSVC_MAXBLKSIZE;
- resp->f_rtpref = NFSSVC_MAXBLKSIZE;
+ resp->f_rtmax = max_blocksize;
+ resp->f_rtpref = max_blocksize;
resp->f_rtmult = PAGE_SIZE;
- resp->f_wtmax = NFSSVC_MAXBLKSIZE;
- resp->f_wtpref = NFSSVC_MAXBLKSIZE;
+ resp->f_wtmax = max_blocksize;
+ resp->f_wtpref = max_blocksize;
resp->f_wtmult = PAGE_SIZE;
resp->f_dtpref = PAGE_SIZE;
resp->f_maxfilesize = ~(u32) 0;
{
unsigned int len;
int v,pn;
+ u32 max_blocksize = svc_max_payload(rqstp);
if (!(p = decode_fh(p, &args->fh))
|| !(p = xdr_decode_hyper(p, &args->offset)))
len = args->count = ntohl(*p++);
- if (len > NFSSVC_MAXBLKSIZE)
- len = NFSSVC_MAXBLKSIZE;
+ if (len > max_blocksize)
+ len = max_blocksize;
/* set up the kvec */
v=0;
struct nfsd3_writeargs *args)
{
unsigned int len, v, hdr;
+ u32 max_blocksize = svc_max_payload(rqstp);
if (!(p = decode_fh(p, &args->fh))
|| !(p = xdr_decode_hyper(p, &args->offset)))
rqstp->rq_vec[0].iov_base = (void*)p;
rqstp->rq_vec[0].iov_len = rqstp->rq_arg.head[0].iov_len - hdr;
- if (len > NFSSVC_MAXBLKSIZE)
- len = NFSSVC_MAXBLKSIZE;
+ if (len > max_blocksize)
+ len = max_blocksize;
v= 0;
while (len > rqstp->rq_vec[v].iov_len) {
len -= rqstp->rq_vec[v].iov_len;
struct nfsd3_readdirargs *args)
{
int len, pn;
+ u32 max_blocksize = svc_max_payload(rqstp);
if (!(p = decode_fh(p, &args->fh)))
return 0;
args->dircount = ntohl(*p++);
args->count = ntohl(*p++);
- len = (args->count > NFSSVC_MAXBLKSIZE) ? NFSSVC_MAXBLKSIZE :
+ len = (args->count > max_blocksize) ? max_blocksize :
args->count;
args->count = len;
if (bmval0 & FATTR4_WORD0_MAXREAD) {
if ((buflen -= 8) < 0)
goto out_resource;
- WRITE64((u64) NFSSVC_MAXBLKSIZE);
+ WRITE64((u64) svc_max_payload(rqstp));
}
if (bmval0 & FATTR4_WORD0_MAXWRITE) {
if ((buflen -= 8) < 0)
goto out_resource;
- WRITE64((u64) NFSSVC_MAXBLKSIZE);
+ WRITE64((u64) svc_max_payload(rqstp));
}
if (bmval1 & FATTR4_WORD1_MODE) {
if ((buflen -= 4) < 0)
RESERVE_SPACE(8); /* eof flag and byte count */
- maxcount = NFSSVC_MAXBLKSIZE;
+ maxcount = svc_max_payload(resp->rqstp);
if (maxcount > read->rd_length)
maxcount = read->rd_length;
* status, 17 words for fattr, and 1 word for the byte count.
*/
- if (NFSSVC_MAXBLKSIZE < argp->count) {
+ if (NFSSVC_MAXBLKSIZE_V2 < argp->count) {
printk(KERN_NOTICE
"oversized read request from %u.%u.%u.%u:%d (%d bytes)\n",
NIPQUAD(rqstp->rq_addr.sin_addr.s_addr),
ntohs(rqstp->rq_addr.sin_port),
argp->count);
- argp->count = NFSSVC_MAXBLKSIZE;
+ argp->count = NFSSVC_MAXBLKSIZE_V2;
}
svc_reserve(rqstp, (19<<2) + argp->count + 4);
PROC(none, void, void, none, RC_NOCACHE, ST),
PROC(lookup, diropargs, diropres, fhandle, RC_NOCACHE, ST+FH+AT),
PROC(readlink, readlinkargs, readlinkres, none, RC_NOCACHE, ST+1+NFS_MAXPATHLEN/4),
- PROC(read, readargs, readres, fhandle, RC_NOCACHE, ST+AT+1+NFSSVC_MAXBLKSIZE/4),
+ PROC(read, readargs, readres, fhandle, RC_NOCACHE, ST+AT+1+NFSSVC_MAXBLKSIZE_V2/4),
PROC(none, void, void, none, RC_NOCACHE, ST),
PROC(write, writeargs, attrstat, fhandle, RC_REPLBUFF, ST+AT),
PROC(create, createargs, diropres, fhandle, RC_REPLBUFF, ST+FH+AT),
len = args->count = ntohl(*p++);
p++; /* totalcount - unused */
- if (len > NFSSVC_MAXBLKSIZE)
- len = NFSSVC_MAXBLKSIZE;
+ if (len > NFSSVC_MAXBLKSIZE_V2)
+ len = NFSSVC_MAXBLKSIZE_V2;
/* set up somewhere to store response.
* We take pages, put them on reslist and include in iovec
rqstp->rq_vec[0].iov_base = (void*)p;
rqstp->rq_vec[0].iov_len = rqstp->rq_arg.head[0].iov_len -
(((void*)p) - rqstp->rq_arg.head[0].iov_base);
- if (len > NFSSVC_MAXBLKSIZE)
- len = NFSSVC_MAXBLKSIZE;
+ if (len > NFSSVC_MAXBLKSIZE_V2)
+ len = NFSSVC_MAXBLKSIZE_V2;
v = 0;
while (len > rqstp->rq_vec[v].iov_len) {
len -= rqstp->rq_vec[v].iov_len;
{
struct kstatfs *stat = &resp->stats;
- *p++ = htonl(NFSSVC_MAXBLKSIZE); /* max transfer size */
+ *p++ = htonl(NFSSVC_MAXBLKSIZE_V2); /* max transfer size */
*p++ = htonl(stat->f_bsize);
*p++ = htonl(stat->f_blocks);
*p++ = htonl(stat->f_bfree);
#include <linux/nfs2.h>
#include <linux/nfs3.h>
#include <linux/nfs4.h>
+#include <linux/sunrpc/msg_prot.h>
/*
* Maximum protocol version supported by knfsd
* Maximum blocksize supported by daemon currently at 32K
*/
#define NFSSVC_MAXBLKSIZE (32*1024)
+/* NFSv2 is limited by the protocol specification, see RFC 1094 */
+#define NFSSVC_MAXBLKSIZE_V2 (8*1024)
#ifdef __KERNEL__
# define NFS_SUPER_MAGIC 0x6969
#endif
-#define NFSD_BUFSIZE (1024 + NFSSVC_MAXBLKSIZE)
+/*
+ * Largest number of bytes we need to allocate for an NFS
+ * call or reply. Used to control buffer sizes. We use
+ * the length of v3 WRITE, READDIR and READDIR replies
+ * which are an RPC header, up to 26 XDR units of reply
+ * data, and some page data.
+ *
+ * Note that accuracy here doesn't matter too much as the
+ * size is rounded up to a page size when allocating space.
+ */
+#define NFSD_BUFSIZE ((RPC_MAX_HEADER_WITH_AUTH+26)*XDR_UNIT + NFSSVC_MAXBLKSIZE)
#ifdef CONFIG_NFSD_V4
# define NFSSVC_XDRSIZE NFS4_SVC_XDRSIZE
/* size of the nodename buffer */
#define UNX_MAXNODENAME 32
-/* Maximum size (in bytes) of an rpc credential or verifier */
-#define RPC_MAX_AUTH_SIZE (400)
-
/* Work around the lack of a VFS credential */
struct auth_cred {
uid_t uid;
#define RPC_VERSION 2
+/* size of an XDR encoding unit in bytes, i.e. 32bit */
+#define XDR_UNIT (4)
+
/* spec defines authentication flavor as an unsigned 32 bit integer */
typedef u32 rpc_authflavor_t;
RPC_AUTH_GSS_SPKMP = 390011,
};
+/* Maximum size (in bytes) of an rpc credential or verifier */
+#define RPC_MAX_AUTH_SIZE (400)
+
enum rpc_msg_type {
RPC_CALL = 0,
RPC_REPLY = 1
#define RPC_FRAGMENT_SIZE_MASK (~RPC_LAST_STREAM_FRAGMENT)
#define RPC_MAX_FRAGMENT_SIZE ((1U << 31) - 1)
+/*
+ * RPC call and reply header size as number of 32bit words (verifier
+ * size computed separately, see below)
+ */
+#define RPC_CALLHDRSIZE (6)
+#define RPC_REPHDRSIZE (4)
+
+
+/*
+ * Maximum RPC header size, including authentication,
+ * as number of 32bit words (see RFCs 1831, 1832).
+ *
+ * xid 1 xdr unit = 4 bytes
+ * mtype 1
+ * rpc_version 1
+ * program 1
+ * prog_version 1
+ * procedure 1
+ * cred {
+ * flavor 1
+ * length 1
+ * body<RPC_MAX_AUTH_SIZE> 100 xdr units = 400 bytes
+ * }
+ * verf {
+ * flavor 1
+ * length 1
+ * body<RPC_MAX_AUTH_SIZE> 100 xdr units = 400 bytes
+ * }
+ * TOTAL 210 xdr units = 840 bytes
+ */
+#define RPC_MAX_HEADER_WITH_AUTH \
+ (RPC_CALLHDRSIZE + 2*(2+RPC_MAX_AUTH_SIZE/4))
+
+
#endif /* __KERNEL__ */
#endif /* _LINUX_SUNRPC_MSGPROT_H_ */
#include <linux/in.h>
#include <linux/sunrpc/types.h>
#include <linux/sunrpc/xdr.h>
+#include <linux/sunrpc/auth.h>
#include <linux/sunrpc/svcauth.h>
#include <linux/wait.h>
#include <linux/mm.h>
* Maximum payload size supported by a kernel RPC server.
* This is use to determine the max number of pages nfsd is
* willing to return in a single READ operation.
+ *
+ * These happen to all be powers of 2, which is not strictly
+ * necessary but helps enforce the real limitation, which is
+ * that they should be multiples of PAGE_CACHE_SIZE.
+ *
+ * For UDP transports, a block plus NFS,RPC, and UDP headers
+ * has to fit into the IP datagram limit of 64K. The largest
+ * feasible number for all known page sizes is probably 48K,
+ * but we choose 32K here. This is the same as the historical
+ * Linux limit; someone who cares more about NFS/UDP performance
+ * can test a larger number.
+ *
+ * For TCP transports we have more freedom. A size of 1MB is
+ * chosen to match the client limit. Other OSes are known to
+ * have larger limits, but those numbers are probably beyond
+ * the point of diminishing returns.
*/
-#define RPCSVC_MAXPAYLOAD (64*1024u)
+#define RPCSVC_MAXPAYLOAD (1*1024*1024u)
+#define RPCSVC_MAXPAYLOAD_TCP RPCSVC_MAXPAYLOAD
+#define RPCSVC_MAXPAYLOAD_UDP (32*1024u)
+
+extern u32 svc_max_payload(const struct svc_rqst *rqstp);
/*
* RPC Requsts and replies are stored in one or more pages.
#include <linux/kref.h>
#include <linux/sunrpc/sched.h>
#include <linux/sunrpc/xdr.h>
+#include <linux/sunrpc/msg_prot.h>
extern unsigned int xprt_udp_slot_table_entries;
extern unsigned int xprt_tcp_slot_table_entries;
#define RPC_DEF_SLOT_TABLE (16U)
#define RPC_MAX_SLOT_TABLE (128U)
-/*
- * RPC call and reply header size as number of 32bit words (verifier
- * size computed separately)
- */
-#define RPC_CALLHDRSIZE 6
-#define RPC_REPHDRSIZE 4
-
/*
* Parameters for choosing a free port
*/
svc_putnl(resv, ntohl(rpc_stat));
goto sendit;
}
+
+/*
+ * Return (transport-specific) limit on the rpc payload.
+ */
+u32 svc_max_payload(const struct svc_rqst *rqstp)
+{
+ int max = RPCSVC_MAXPAYLOAD_TCP;
+
+ if (rqstp->rq_sock->sk_sock->type == SOCK_DGRAM)
+ max = RPCSVC_MAXPAYLOAD_UDP;
+ if (rqstp->rq_server->sv_bufsz < max)
+ max = rqstp->rq_server->sv_bufsz;
+ return max;
+}
+EXPORT_SYMBOL_GPL(svc_max_payload);
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff