{ .bitrate = 540, .hw_value = 11, },
};
+static struct p54_rssi_db_entry p54_rssi_default = {
+ /*
+ * The defaults are taken from usb-logs of the
+ * vendor driver. So, they should be safe to
+ * use in case we can't get a match from the
+ * rssi <-> dBm conversion database.
+ */
+ .mul = 130,
+ .add = -398,
+};
+
#define CHAN_HAS_CAL BIT(0)
#define CHAN_HAS_LIMIT BIT(1)
#define CHAN_HAS_CURVE BIT(2)
return -1;
}
+static int same_band(u16 freq, u16 freq2)
+{
+ return p54_get_band_from_freq(freq) == p54_get_band_from_freq(freq2);
+}
+
static int p54_compare_channels(const void *_a,
const void *_b)
{
return a->freq - b->freq;
}
+static int p54_compare_rssichan(const void *_a,
+ const void *_b)
+{
+ const struct p54_rssi_db_entry *a = _a;
+ const struct p54_rssi_db_entry *b = _b;
+
+ return a->freq - b->freq;
+}
+
static int p54_fill_band_bitrates(struct ieee80211_hw *dev,
struct ieee80211_supported_band *band_entry,
enum ieee80211_band band)
static const char *p54_rf_chips[] = { "INVALID-0", "Duette3", "Duette2",
"Frisbee", "Xbow", "Longbow", "INVALID-6", "INVALID-7" };
-static void p54_parse_rssical(struct ieee80211_hw *dev, void *data, int len,
- u16 type)
+static int p54_parse_rssical(struct ieee80211_hw *dev,
+ u8 *data, int len, u16 type)
{
struct p54_common *priv = dev->priv;
- int offset = (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) ? 2 : 0;
- int entry_size = sizeof(struct pda_rssi_cal_entry) + offset;
- int num_entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2;
- int i;
+ struct p54_rssi_db_entry *entry;
+ size_t db_len, entries;
+ int offset = 0, i;
+
+ if (type != PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) {
+ entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2;
+ if (len != sizeof(struct pda_rssi_cal_entry) * entries) {
+ wiphy_err(dev->wiphy, "rssical size mismatch.\n");
+ goto err_data;
+ }
+ } else {
+ /*
+ * Some devices (Dell 1450 USB, Xbow 5GHz card, etc...)
+ * have an empty two byte header.
+ */
+ if (*((__le16 *)&data[offset]) == cpu_to_le16(0))
+ offset += 2;
- if (len != (entry_size * num_entries)) {
- wiphy_err(dev->wiphy,
- "unknown rssi calibration data packing type:(%x) len:%d.\n",
- type, len);
+ entries = (len - offset) /
+ sizeof(struct pda_rssi_cal_ext_entry);
- print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE,
- data, len);
+ if ((len - offset) % sizeof(struct pda_rssi_cal_ext_entry) ||
+ entries <= 0) {
+ wiphy_err(dev->wiphy, "invalid rssi database.\n");
+ goto err_data;
+ }
+ }
- wiphy_err(dev->wiphy, "please report this issue.\n");
- return;
+ db_len = sizeof(*entry) * entries;
+ priv->rssi_db = kzalloc(db_len + sizeof(*priv->rssi_db), GFP_KERNEL);
+ if (!priv->rssi_db)
+ return -ENOMEM;
+
+ priv->rssi_db->offset = 0;
+ priv->rssi_db->entries = entries;
+ priv->rssi_db->entry_size = sizeof(*entry);
+ priv->rssi_db->len = db_len;
+
+ entry = (void *)((unsigned long)priv->rssi_db->data + priv->rssi_db->offset);
+ if (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) {
+ struct pda_rssi_cal_ext_entry *cal = (void *) &data[offset];
+
+ for (i = 0; i < entries; i++) {
+ entry[i].freq = le16_to_cpu(cal[i].freq);
+ entry[i].mul = (s16) le16_to_cpu(cal[i].mul);
+ entry[i].add = (s16) le16_to_cpu(cal[i].add);
+ }
+ } else {
+ struct pda_rssi_cal_entry *cal = (void *) &data[offset];
+
+ for (i = 0; i < entries; i++) {
+ u16 freq;
+ switch (i) {
+ case IEEE80211_BAND_2GHZ:
+ freq = 2437;
+ break;
+ case IEEE80211_BAND_5GHZ:
+ freq = 5240;
+ break;
+ }
+
+ entry[i].freq = freq;
+ entry[i].mul = (s16) le16_to_cpu(cal[i].mul);
+ entry[i].add = (s16) le16_to_cpu(cal[i].add);
+ }
}
- for (i = 0; i < num_entries; i++) {
- struct pda_rssi_cal_entry *cal = data +
- (offset + i * entry_size);
- priv->rssical_db[i].mul = (s16) le16_to_cpu(cal->mul);
- priv->rssical_db[i].add = (s16) le16_to_cpu(cal->add);
+ /* sort the list by channel frequency */
+ sort(entry, entries, sizeof(*entry), p54_compare_rssichan, NULL);
+ return 0;
+
+err_data:
+ wiphy_err(dev->wiphy,
+ "rssi calibration data packing type:(%x) len:%d.\n",
+ type, len);
+
+ print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE, data, len);
+
+ wiphy_err(dev->wiphy, "please report this issue.\n");
+ return -EINVAL;
+}
+
+struct p54_rssi_db_entry *p54_rssi_find(struct p54_common *priv, const u16 freq)
+{
+ struct p54_rssi_db_entry *entry = (void *)(priv->rssi_db->data +
+ priv->rssi_db->offset);
+ int i, found = -1;
+
+ for (i = 0; i < priv->rssi_db->entries; i++) {
+ if (!same_band(freq, entry[i].freq))
+ continue;
+
+ if (found == -1) {
+ found = i;
+ continue;
+ }
+
+ /* nearest match */
+ if (abs(freq - entry[i].freq) <
+ abs(freq - entry[found].freq)) {
+ found = i;
+ continue;
+ } else {
+ break;
+ }
}
+
+ return found < 0 ? &p54_rssi_default : &entry[found];
}
static void p54_parse_default_country(struct ieee80211_hw *dev,
case PDR_RSSI_LINEAR_APPROXIMATION:
case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND:
case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED:
- p54_parse_rssical(dev, entry->data, data_len,
- le16_to_cpu(entry->code));
+ err = p54_parse_rssical(dev, entry->data, data_len,
+ le16_to_cpu(entry->code));
+ if (err)
+ goto err;
break;
- case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOM: {
- __le16 *src = (void *) entry->data;
- s16 *dst = (void *) &priv->rssical_db;
+ case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2: {
+ struct pda_custom_wrapper *pda = (void *) entry->data;
+ __le16 *src;
+ u16 *dst;
int i;
- if (data_len != sizeof(priv->rssical_db)) {
- err = -EINVAL;
- goto err;
- }
- for (i = 0; i < sizeof(priv->rssical_db) /
- sizeof(*src); i++)
+ if (priv->rssi_db || data_len < sizeof(*pda))
+ break;
+
+ priv->rssi_db = p54_convert_db(pda, data_len);
+ if (!priv->rssi_db)
+ break;
+
+ src = (void *) priv->rssi_db->data;
+ dst = (void *) priv->rssi_db->data;
+
+ for (i = 0; i < priv->rssi_db->entries; i++)
*(dst++) = (s16) le16_to_cpu(*(src++));
+
}
break;
case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM: {
SET_IEEE80211_PERM_ADDR(dev, perm_addr);
}
+ priv->cur_rssi = &p54_rssi_default;
+
wiphy_info(dev->wiphy, "hwaddr %pM, MAC:isl38%02x RF:%s\n",
dev->wiphy->perm_addr, priv->version,
p54_rf_chips[priv->rxhw]);
kfree(priv->iq_autocal);
kfree(priv->output_limit);
kfree(priv->curve_data);
+ kfree(priv->rssi_db);
priv->iq_autocal = NULL;
priv->output_limit = NULL;
priv->curve_data = NULL;
+ priv->rssi_db = NULL;
wiphy_err(dev->wiphy, "eeprom parse failed!\n");
return err;
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff