USB: ssu100: remove duplicate #defines in ssu100

The ssu100 uses a TI16C550C UART so the SERIAL_ defines in this code
are duplicates of those found in serial_reg.h.  Remove the defines in
ssu100.c and use the ones in the header file.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index c7193880a2b696c8123630d0fa5be9615c685ea7..3c586b5790e1d2afe4f7918771829d00f1b3d795 100644 (file)
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -15,6 +15,7 @@
 #include <linux/serial.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
 #include <linux/uaccess.h>
 
 #define QT_OPEN_CLOSE_CHANNEL       0xca
@@ -27,36 +28,11 @@
 #define QT_HW_FLOW_CONTROL_MASK     0xc5
 #define QT_SW_FLOW_CONTROL_MASK     0xc6
 
-#define MODEM_CTL_REGISTER         0x04
-#define MODEM_STATUS_REGISTER      0x06
-
-
-#define SERIAL_LSR_OE       0x02
-#define SERIAL_LSR_PE       0x04
-#define SERIAL_LSR_FE       0x08
-#define SERIAL_LSR_BI       0x10
-
-#define SERIAL_LSR_TEMT     0x40
-
-#define  SERIAL_MCR_DTR             0x01
-#define  SERIAL_MCR_RTS             0x02
-#define  SERIAL_MCR_LOOP            0x10
-
-#define  SERIAL_MSR_CTS             0x10
-#define  SERIAL_MSR_CD              0x80
-#define  SERIAL_MSR_RI              0x40
-#define  SERIAL_MSR_DSR             0x20
 #define  SERIAL_MSR_MASK            0xf0
 
-#define  SERIAL_CRTSCTS ((SERIAL_MCR_RTS << 8) | SERIAL_MSR_CTS)
-
-#define  SERIAL_8_DATA              0x03
-#define  SERIAL_7_DATA              0x02
-#define  SERIAL_6_DATA              0x01
-#define  SERIAL_5_DATA              0x00
+#define  SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS)
 
-#define  SERIAL_ODD_PARITY          0X08
-#define  SERIAL_EVEN_PARITY         0X18
+#define  SERIAL_EVEN_PARITY         (UART_LCR_PARITY | UART_LCR_EPAR)
 
 #define  MAX_BAUD_RATE              460800
 
@@ -153,7 +129,7 @@ static inline int ssu100_setregister(struct usb_device *dev,
                                     unsigned short uart,
                                     u16 data)
 {
-       u16 value = (data << 8) | MODEM_CTL_REGISTER;
+       u16 value = (data << 8) | UART_MCR;
 
        return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                               QT_SET_GET_REGISTER, 0x40, value, uart,
@@ -179,9 +155,9 @@ static inline int update_mctrl(struct usb_device *dev, unsigned int set,
        clear &= ~set;  /* 'set' takes precedence over 'clear' */
        urb_value = 0;
        if (set & TIOCM_DTR)
-               urb_value |= SERIAL_MCR_DTR;
+               urb_value |= UART_MCR_DTR;
        if (set & TIOCM_RTS)
-               urb_value |= SERIAL_MCR_RTS;
+               urb_value |= UART_MCR_RTS;
 
        result = ssu100_setregister(dev, 0, urb_value);
        if (result < 0)
@@ -265,24 +241,24 @@ static void ssu100_set_termios(struct tty_struct *tty,
 
        if (cflag & PARENB) {
                if (cflag & PARODD)
-                       urb_value |= SERIAL_ODD_PARITY;
+                       urb_value |= UART_LCR_PARITY;
                else
                        urb_value |= SERIAL_EVEN_PARITY;
        }
 
        switch (cflag & CSIZE) {
        case CS5:
-               urb_value |= SERIAL_5_DATA;
+               urb_value |= UART_LCR_WLEN5;
                break;
        case CS6:
-               urb_value |= SERIAL_6_DATA;
+               urb_value |= UART_LCR_WLEN6;
                break;
        case CS7:
-               urb_value |= SERIAL_7_DATA;
+               urb_value |= UART_LCR_WLEN7;
                break;
        default:
        case CS8:
-               urb_value |= SERIAL_8_DATA;
+               urb_value |= UART_LCR_WLEN8;
                break;
        }
 
@@ -353,11 +329,11 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
        }
 
        spin_lock_irqsave(&priv->status_lock, flags);
-       priv->shadowLSR = data[0]  & (SERIAL_LSR_OE | SERIAL_LSR_PE |
-                                     SERIAL_LSR_FE | SERIAL_LSR_BI);
+       priv->shadowLSR = data[0]  & (UART_LSR_OE | UART_LSR_PE |
+                                     UART_LSR_FE | UART_LSR_BI);
 
-       priv->shadowMSR = data[1]  & (SERIAL_MSR_CTS | SERIAL_MSR_DSR |
-                                     SERIAL_MSR_RI | SERIAL_MSR_CD);
+       priv->shadowMSR = data[1]  & (UART_MSR_CTS | UART_MSR_DSR |
+                                     UART_MSR_RI | UART_MSR_DCD);
        spin_unlock_irqrestore(&priv->status_lock, flags);
 
        kfree(data);
@@ -430,10 +406,10 @@ static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
                                /* Return 0 if caller wanted to know about
                                   these bits */
 
-                               if (((arg & TIOCM_RNG) && (diff & SERIAL_MSR_RI)) ||
-                                   ((arg & TIOCM_DSR) && (diff & SERIAL_MSR_DSR)) ||
-                                   ((arg & TIOCM_CD) && (diff & SERIAL_MSR_CD)) ||
-                                   ((arg & TIOCM_CTS) && (diff & SERIAL_MSR_CTS)))
+                               if (((arg & TIOCM_RNG) && (diff & UART_MSR_RI)) ||
+                                   ((arg & TIOCM_DSR) && (diff & UART_MSR_DSR)) ||
+                                   ((arg & TIOCM_CD) && (diff & UART_MSR_DCD)) ||
+                                   ((arg & TIOCM_CTS) && (diff & UART_MSR_CTS)))
                                        return 0;
                        }
                }
@@ -513,20 +489,20 @@ static int ssu100_tiocmget(struct tty_struct *tty, struct file *file)
        if (!d)
                return -ENOMEM;
 
-       r = ssu100_getregister(dev, 0, MODEM_CTL_REGISTER, d);
+       r = ssu100_getregister(dev, 0, UART_MCR, d);
        if (r < 0)
                goto mget_out;
 
-       r = ssu100_getregister(dev, 0, MODEM_STATUS_REGISTER, d+1);
+       r = ssu100_getregister(dev, 0, UART_MSR, d+1);
        if (r < 0)
                goto mget_out;
 
-       r = (d[0] & SERIAL_MCR_DTR ? TIOCM_DTR : 0) |
-               (d[0] & SERIAL_MCR_RTS ? TIOCM_RTS : 0) |
-               (d[1] & SERIAL_MSR_CTS ? TIOCM_CTS : 0) |
-               (d[1] & SERIAL_MSR_CD ? TIOCM_CAR : 0) |
-               (d[1] & SERIAL_MSR_RI ? TIOCM_RI : 0) |
-               (d[1] & SERIAL_MSR_DSR ? TIOCM_DSR : 0);
+       r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) |
+               (d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) |
+               (d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) |
+               (d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) |
+               (d[1] & UART_MSR_RI ? TIOCM_RI : 0) |
+               (d[1] & UART_MSR_DSR ? TIOCM_DSR : 0);
 
 mget_out:
        kfree(d);
@@ -579,10 +555,10 @@ static int ssu100_process_packet(struct tty_struct *tty,
            (packet[0] == 0x1b) && (packet[1] == 0x1b) &&
            ((packet[2] == 0x00) || (packet[2] == 0x01))) {
                if (packet[2] == 0x00)
-                       priv->shadowLSR = packet[3] & (SERIAL_LSR_OE |
-                                                      SERIAL_LSR_PE |
-                                                      SERIAL_LSR_FE |
-                                                      SERIAL_LSR_BI);
+                       priv->shadowLSR = packet[3] & (UART_LSR_OE |
+                                                      UART_LSR_PE |
+                                                      UART_LSR_FE |
+                                                      UART_LSR_BI);
 
                if (packet[2] == 0x01) {
                        priv->shadowMSR = packet[3];