ARM: dts: am57xx-idk: Move common MMC/SD properties to common file

AM572x IDK and AM571x IDK boards have equivalent
design of how SD card and eMMC are connected.

The two EVMs mainly differ in IOdelay configuration
needed (because of difference in SoC used).

Move the common properties to am57xx-idk-common.dtsi
file which is common for both EVMs.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 0c0bb4e93f25b91d893a5e3c74165f040dd3000a..78c5c7462fcc37c309c94cd1aebaa7a43ceb41d0 100644 (file)
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -64,13 +64,6 @@
        };
 };
 
-&mmc1 {
-       status = "okay";
-       vmmc-supply = <&ldo1_reg>;
-       bus-width = <4>;
-       cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
-};
-
 &omap_dwc3_2 {
        extcon = <&extcon_usb2>;
 };

diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 604d52554eda773ab770293b02734a7f3a95a3c4..5b22944fedadceb7d68d9d68997369a16d1a9496 100644 (file)
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -76,14 +76,6 @@
        vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
 };
 
-&mmc1 {
-       status = "okay";
-       vmmc-supply = <&v3_3d>;
-       vqmmc-supply = <&ldo1_reg>;
-       bus-width = <4>;
-       cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
-};
-
 &sn65hvs882 {
        load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 };

diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index c536b2f5389f2786930a48eb0f7446311c622121..97aa8e6a56da8f7c8722f5243e01fca0e944f629 100644 (file)
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -399,6 +399,14 @@
        dr_mode = "peripheral";
 };
 
+&mmc1 {
+       status = "okay";
+       vmmc-supply = <&v3_3d>;
+       vqmmc-supply = <&ldo1_reg>;
+       bus-width = <4>;
+       cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+};
+
 &mmc2 {
        status = "okay";
        vmmc-supply = <&v3_3d>;