my_ha->sas_ha.lldd_dev_found = my_dev_found;
my_ha->sas_ha.lldd_dev_gone = my_dev_gone;
- my_ha->sas_ha.lldd_max_execute_num = lldd_max_execute_num; (1)
-
- my_ha->sas_ha.lldd_queue_size = ha_can_queue;
my_ha->sas_ha.lldd_execute_task = my_execute_task;
my_ha->sas_ha.lldd_abort_task = my_abort_task;
return sas_register_ha(&my_ha->sas_ha);
}
-(1) This is normally a LLDD parameter, something of the
-lines of a task collector. What it tells the SAS Layer is
-whether the SAS layer should run in Direct Mode (default:
-value 0 or 1) or Task Collector Mode (value greater than 1).
-
-In Direct Mode, the SAS Layer calls Execute Task as soon as
-it has a command to send to the SDS, _and_ this is a single
-command, i.e. not linked.
-
-Some hardware (e.g. aic94xx) has the capability to DMA more
-than one task at a time (interrupt) from host memory. Task
-Collector Mode is an optional feature for HAs which support
-this in their hardware. (Again, it is completely optional
-even if your hardware supports it.)
-
-In Task Collector Mode, the SAS Layer would do _natural_
-coalescing of tasks and at the appropriate moment it would
-call your driver to DMA more than one task in a single HA
-interrupt. DMBS may want to use this by insmod/modprobe
-setting the lldd_max_execute_num to something greater than
-1.
-
(2) SAS 1.1 does not define I_T Nexus Reset TMF.
Events
The Execute Command SCSI RPC:
- int (*lldd_execute_task)(struct sas_task *, int num,
- unsigned long gfp_flags);
+ int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags);
-Used to queue a task to the SAS LLDD. @task is the tasks to
-be executed. @num should be the number of tasks being
-queued at this function call (they are linked listed via
-task::list), @gfp_mask should be the gfp_mask defining the
-context of the caller.
+Used to queue a task to the SAS LLDD. @task is the task to be executed.
+@gfp_mask is the gfp_mask defining the context of the caller.
This function should implement the Execute Command SCSI RPC,
-or if you're sending a SCSI Task as linked commands, you
-should also use this function.
-That is, when lldd_execute_task() is called, the command(s)
+That is, when lldd_execute_task() is called, the command
go out on the transport *immediately*. There is *no*
queuing of any sort and at any level in a SAS LLDD.
-The use of task::list is two-fold, one for linked commands,
-the other discussed below.
-
-It is possible to queue up more than one task at a time, by
-initializing the list element of struct sas_task, and
-passing the number of tasks enlisted in this manner in num.
-
Returns: -SAS_QUEUE_FULL, -ENOMEM, nothing was queued;
0, the task(s) were queued.
-If you want to pass num > 1, then either
-A) you're the only caller of this function and keep track
- of what you've queued to the LLDD, or
-B) you know what you're doing and have a strategy of
- retrying.
-
-As opposed to queuing one task at a time (function call),
-batch queuing of tasks, by having num > 1, greatly
-simplifies LLDD code, sequencer code, and _hardware design_,
-and has some performance advantages in certain situations
-(DBMS).
-
-The LLDD advertises if it can take more than one command at
-a time at lldd_execute_task(), by setting the
-lldd_max_execute_num parameter (controlled by "collector"
-module parameter in aic94xx SAS LLDD).
-
-You should leave this to the default 1, unless you know what
-you're doing.
-
-This is a function of the LLDD, to which the SAS layer can
-cater to.
-
-int lldd_queue_size
- The host adapter's queue size. This is the maximum
-number of commands the lldd can have pending to domain
-devices on behalf of all upper layers submitting through
-lldd_execute_task().
-
-You really want to set this to something (much) larger than
-1.
-
-This _really_ has absolutely nothing to do with queuing.
-There is no queuing in SAS LLDDs.
-
struct sas_task {
dev -- the device this task is destined to
- list -- must be initialized (INIT_LIST_HEAD)
task_proto -- _one_ of enum sas_proto
scatter -- pointer to scatter gather list array
num_scatter -- number of elements in scatter
void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id);
-int asd_execute_task(struct sas_task *, int num, gfp_t gfp_flags);
+int asd_execute_task(struct sas_task *task, gfp_t gfp_flags);
void asd_set_dmamode(struct domain_device *dev);
* Case A: we can send the whole batch at once. Increment "pending"
* in the beginning of this function, when it is checked, in order to
* eliminate races when this function is called by multiple processes.
- * Case B: should never happen if the managing layer considers
- * lldd_queue_size.
+ * Case B: should never happen.
*/
int asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
int num)
"\tEnable(1) or disable(0) using PCI MSI.\n"
"\tDefault: 0");
-static int lldd_max_execute_num = 0;
-module_param_named(collector, lldd_max_execute_num, int, S_IRUGO);
-MODULE_PARM_DESC(collector, "\n"
- "\tIf greater than one, tells the SAS Layer to run in Task Collector\n"
- "\tMode. If 1 or 0, tells the SAS Layer to run in Direct Mode.\n"
- "\tThe aic94xx SAS LLDD supports both modes.\n"
- "\tDefault: 0 (Direct Mode).\n");
-
static struct scsi_transport_template *aic94xx_transport_template;
static int asd_scan_finished(struct Scsi_Host *, unsigned long);
static void asd_scan_start(struct Scsi_Host *);
asd_ha->sas_ha.sas_port= sas_ports;
asd_ha->sas_ha.num_phys= ASD_MAX_PHYS;
- asd_ha->sas_ha.lldd_queue_size = asd_ha->seq.can_queue;
- asd_ha->sas_ha.lldd_max_execute_num = lldd_max_execute_num;
-
return sas_register_ha(&asd_ha->sas_ha);
}
return res;
}
-int asd_execute_task(struct sas_task *task, const int num,
- gfp_t gfp_flags)
+int asd_execute_task(struct sas_task *task, gfp_t gfp_flags)
{
int res = 0;
LIST_HEAD(alist);
struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
unsigned long flags;
- res = asd_can_queue(asd_ha, num);
+ res = asd_can_queue(asd_ha, 1);
if (res)
return res;
- res = num;
+ res = 1;
ascb = asd_ascb_alloc_list(asd_ha, &res, gfp_flags);
if (res) {
res = -ENOMEM;
list_for_each_entry(a, &alist, list) {
a->uldd_task = t;
t->lldd_task = a;
- t = list_entry(t->list.next, struct sas_task, list);
+ break;
}
list_for_each_entry(a, &alist, list) {
t = a->uldd_task;
}
list_del_init(&alist);
- res = asd_post_ascb_list(asd_ha, ascb, num);
+ res = asd_post_ascb_list(asd_ha, ascb, 1);
if (unlikely(res)) {
a = NULL;
__list_add(&alist, ascb->list.prev, &ascb->list);
out_err:
if (ascb)
asd_ascb_free_list(ascb);
- asd_can_dequeue(asd_ha, num);
+ asd_can_dequeue(asd_ha, 1);
return res;
}
sas_ha->sas_port = sas_ports;
sas_ha->num_phys = SCI_MAX_PHYS;
- sas_ha->lldd_queue_size = ISCI_CAN_QUEUE_VAL;
- sas_ha->lldd_max_execute_num = 1;
sas_ha->strict_wide_ports = 1;
sas_register_ha(sas_ha);
* functions. This function is called by libsas to send a task down to
* hardware.
* @task: This parameter specifies the SAS task to send.
- * @num: This parameter specifies the number of tasks to queue.
* @gfp_flags: This parameter specifies the context of this call.
*
* status, zero indicates success.
*/
-int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags)
+int isci_task_execute_task(struct sas_task *task, gfp_t gfp_flags)
{
struct isci_host *ihost = dev_to_ihost(task->dev);
struct isci_remote_device *idev;
unsigned long flags;
+ enum sci_status status = SCI_FAILURE;
bool io_ready;
u16 tag;
- dev_dbg(&ihost->pdev->dev, "%s: num=%d\n", __func__, num);
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ idev = isci_lookup_device(task->dev);
+ io_ready = isci_device_io_ready(idev, task);
+ tag = isci_alloc_tag(ihost);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
- for_each_sas_task(num, task) {
- enum sci_status status = SCI_FAILURE;
+ dev_dbg(&ihost->pdev->dev,
+ "task: %p, dev: %p idev: %p:%#lx cmd = %p\n",
+ task, task->dev, idev, idev ? idev->flags : 0,
+ task->uldd_task);
- spin_lock_irqsave(&ihost->scic_lock, flags);
- idev = isci_lookup_device(task->dev);
- io_ready = isci_device_io_ready(idev, task);
- tag = isci_alloc_tag(ihost);
- spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ if (!idev) {
+ isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED,
+ SAS_DEVICE_UNKNOWN);
+ } else if (!io_ready || tag == SCI_CONTROLLER_INVALID_IO_TAG) {
+ /* Indicate QUEUE_FULL so that the scsi midlayer
+ * retries.
+ */
+ isci_task_refuse(ihost, task, SAS_TASK_COMPLETE,
+ SAS_QUEUE_FULL);
+ } else {
+ /* There is a device and it's ready for I/O. */
+ spin_lock_irqsave(&task->task_state_lock, flags);
- dev_dbg(&ihost->pdev->dev,
- "task: %p, num: %d dev: %p idev: %p:%#lx cmd = %p\n",
- task, num, task->dev, idev, idev ? idev->flags : 0,
- task->uldd_task);
-
- if (!idev) {
- isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED,
- SAS_DEVICE_UNKNOWN);
- } else if (!io_ready || tag == SCI_CONTROLLER_INVALID_IO_TAG) {
- /* Indicate QUEUE_FULL so that the scsi midlayer
- * retries.
- */
- isci_task_refuse(ihost, task, SAS_TASK_COMPLETE,
- SAS_QUEUE_FULL);
+ if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+ /* The I/O was aborted. */
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ isci_task_refuse(ihost, task,
+ SAS_TASK_UNDELIVERED,
+ SAM_STAT_TASK_ABORTED);
} else {
- /* There is a device and it's ready for I/O. */
- spin_lock_irqsave(&task->task_state_lock, flags);
-
- if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
- /* The I/O was aborted. */
- spin_unlock_irqrestore(&task->task_state_lock,
- flags);
-
- isci_task_refuse(ihost, task,
- SAS_TASK_UNDELIVERED,
- SAM_STAT_TASK_ABORTED);
- } else {
- task->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ task->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ /* build and send the request. */
+ status = isci_request_execute(ihost, idev, task, tag);
+
+ if (status != SCI_SUCCESS) {
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ /* Did not really start this command. */
+ task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
spin_unlock_irqrestore(&task->task_state_lock, flags);
- /* build and send the request. */
- status = isci_request_execute(ihost, idev, task, tag);
-
- if (status != SCI_SUCCESS) {
-
- spin_lock_irqsave(&task->task_state_lock, flags);
- /* Did not really start this command. */
- task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
- spin_unlock_irqrestore(&task->task_state_lock, flags);
-
- if (test_bit(IDEV_GONE, &idev->flags)) {
-
- /* Indicate that the device
- * is gone.
- */
- isci_task_refuse(ihost, task,
- SAS_TASK_UNDELIVERED,
- SAS_DEVICE_UNKNOWN);
- } else {
- /* Indicate QUEUE_FULL so that
- * the scsi midlayer retries.
- * If the request failed for
- * remote device reasons, it
- * gets returned as
- * SAS_TASK_UNDELIVERED next
- * time through.
- */
- isci_task_refuse(ihost, task,
- SAS_TASK_COMPLETE,
- SAS_QUEUE_FULL);
- }
+ if (test_bit(IDEV_GONE, &idev->flags)) {
+ /* Indicate that the device
+ * is gone.
+ */
+ isci_task_refuse(ihost, task,
+ SAS_TASK_UNDELIVERED,
+ SAS_DEVICE_UNKNOWN);
+ } else {
+ /* Indicate QUEUE_FULL so that
+ * the scsi midlayer retries.
+ * If the request failed for
+ * remote device reasons, it
+ * gets returned as
+ * SAS_TASK_UNDELIVERED next
+ * time through.
+ */
+ isci_task_refuse(ihost, task,
+ SAS_TASK_COMPLETE,
+ SAS_QUEUE_FULL);
}
}
}
- if (status != SCI_SUCCESS && tag != SCI_CONTROLLER_INVALID_IO_TAG) {
- spin_lock_irqsave(&ihost->scic_lock, flags);
- /* command never hit the device, so just free
- * the tci and skip the sequence increment
- */
- isci_tci_free(ihost, ISCI_TAG_TCI(tag));
- spin_unlock_irqrestore(&ihost->scic_lock, flags);
- }
- isci_put_device(idev);
}
+
+ if (status != SCI_SUCCESS && tag != SCI_CONTROLLER_INVALID_IO_TAG) {
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ /* command never hit the device, so just free
+ * the tci and skip the sequence increment
+ */
+ isci_tci_free(ihost, ISCI_TAG_TCI(tag));
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ }
+
+ isci_put_device(idev);
return 0;
}
int isci_task_execute_task(
struct sas_task *task,
- int num,
gfp_t gfp_flags);
int isci_task_abort_task(
spin_unlock_irqrestore(ap->lock, flags);
qc_already_gone:
- list_del_init(&task->list);
sas_free_task(task);
}
if (qc->scsicmd)
ASSIGN_SAS_TASK(qc->scsicmd, task);
- if (sas_ha->lldd_max_execute_num < 2)
- ret = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
- else
- ret = sas_queue_up(task);
-
- /* Examine */
+ ret = i->dft->lldd_execute_task(task, GFP_ATOMIC);
if (ret) {
SAS_DPRINTK("lldd_execute_task returned: %d\n", ret);
return;
out:
- list_del_init(&task->list);
sas_free_task(task);
}
task->slow_task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
add_timer(&task->slow_task->timer);
- res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
+ res = i->dft->lldd_execute_task(task, GFP_KERNEL);
if (res) {
del_timer(&task->slow_task->timer);
struct sas_task *task = kmem_cache_zalloc(sas_task_cache, flags);
if (task) {
- INIT_LIST_HEAD(&task->list);
spin_lock_init(&task->task_state_lock);
task->task_state_flags = SAS_TASK_STATE_PENDING;
}
void sas_free_task(struct sas_task *task)
{
if (task) {
- BUG_ON(!list_empty(&task->list));
kfree(task->slow_task);
kmem_cache_free(sas_task_cache, task);
}
spin_lock_init(&sas_ha->phy_port_lock);
sas_hash_addr(sas_ha->hashed_sas_addr, sas_ha->sas_addr);
- if (sas_ha->lldd_queue_size == 0)
- sas_ha->lldd_queue_size = 1;
- else if (sas_ha->lldd_queue_size == -1)
- sas_ha->lldd_queue_size = 128; /* Sanity */
-
set_bit(SAS_HA_REGISTERED, &sas_ha->state);
spin_lock_init(&sas_ha->lock);
mutex_init(&sas_ha->drain_mutex);
goto Undo_ports;
}
- if (sas_ha->lldd_max_execute_num > 1) {
- error = sas_init_queue(sas_ha);
- if (error) {
- printk(KERN_NOTICE "couldn't start queue thread:%d, "
- "running in direct mode\n", error);
- sas_ha->lldd_max_execute_num = 1;
- }
- }
-
INIT_LIST_HEAD(&sas_ha->eh_done_q);
INIT_LIST_HEAD(&sas_ha->eh_ata_q);
__sas_drain_work(sas_ha);
mutex_unlock(&sas_ha->drain_mutex);
- if (sas_ha->lldd_max_execute_num > 1) {
- sas_shutdown_queue(sas_ha);
- sas_ha->lldd_max_execute_num = 1;
- }
-
return 0;
}
enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *);
-int sas_init_queue(struct sas_ha_struct *sas_ha);
int sas_init_events(struct sas_ha_struct *sas_ha);
-void sas_shutdown_queue(struct sas_ha_struct *sas_ha);
void sas_disable_revalidation(struct sas_ha_struct *ha);
void sas_enable_revalidation(struct sas_ha_struct *ha);
void __sas_drain_work(struct sas_ha_struct *ha);
sc->result = (hs << 16) | stat;
ASSIGN_SAS_TASK(sc, NULL);
- list_del_init(&task->list);
sas_free_task(task);
}
if (unlikely(!sc)) {
SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n");
- list_del_init(&task->list);
sas_free_task(task);
return;
}
return task;
}
-int sas_queue_up(struct sas_task *task)
-{
- struct sas_ha_struct *sas_ha = task->dev->port->ha;
- struct scsi_core *core = &sas_ha->core;
- unsigned long flags;
- LIST_HEAD(list);
-
- spin_lock_irqsave(&core->task_queue_lock, flags);
- if (sas_ha->lldd_queue_size < core->task_queue_size + 1) {
- spin_unlock_irqrestore(&core->task_queue_lock, flags);
- return -SAS_QUEUE_FULL;
- }
- list_add_tail(&task->list, &core->task_queue);
- core->task_queue_size += 1;
- spin_unlock_irqrestore(&core->task_queue_lock, flags);
- wake_up_process(core->queue_thread);
-
- return 0;
-}
-
int sas_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
{
struct sas_internal *i = to_sas_internal(host->transportt);
struct domain_device *dev = cmd_to_domain_dev(cmd);
- struct sas_ha_struct *sas_ha = dev->port->ha;
struct sas_task *task;
int res = 0;
if (!task)
return SCSI_MLQUEUE_HOST_BUSY;
- /* Queue up, Direct Mode or Task Collector Mode. */
- if (sas_ha->lldd_max_execute_num < 2)
- res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
- else
- res = sas_queue_up(task);
-
+ res = i->dft->lldd_execute_task(task, GFP_ATOMIC);
if (res)
goto out_free_task;
return 0;
TASK_IS_DONE,
TASK_IS_ABORTED,
TASK_IS_AT_LU,
- TASK_IS_NOT_AT_HA,
TASK_IS_NOT_AT_LU,
TASK_ABORT_FAILED,
};
static enum task_disposition sas_scsi_find_task(struct sas_task *task)
{
- struct sas_ha_struct *ha = task->dev->port->ha;
unsigned long flags;
int i, res;
struct sas_internal *si =
to_sas_internal(task->dev->port->ha->core.shost->transportt);
- if (ha->lldd_max_execute_num > 1) {
- struct scsi_core *core = &ha->core;
- struct sas_task *t, *n;
-
- mutex_lock(&core->task_queue_flush);
- spin_lock_irqsave(&core->task_queue_lock, flags);
- list_for_each_entry_safe(t, n, &core->task_queue, list)
- if (task == t) {
- list_del_init(&t->list);
- break;
- }
- spin_unlock_irqrestore(&core->task_queue_lock, flags);
- mutex_unlock(&core->task_queue_flush);
-
- if (task == t)
- return TASK_IS_NOT_AT_HA;
- }
-
for (i = 0; i < 5; i++) {
SAS_DPRINTK("%s: aborting task 0x%p\n", __func__, task);
res = si->dft->lldd_abort_task(task);
cmd->eh_eflags = 0;
switch (res) {
- case TASK_IS_NOT_AT_HA:
- SAS_DPRINTK("%s: task 0x%p is not at ha: %s\n",
- __func__, task,
- cmd->retries ? "retry" : "aborted");
- if (cmd->retries)
- cmd->retries--;
- sas_eh_finish_cmd(cmd);
- continue;
case TASK_IS_DONE:
SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
task);
scsi_eh_ready_devs(shost, &eh_work_q, &ha->eh_done_q);
out:
- if (ha->lldd_max_execute_num > 1)
- wake_up_process(ha->core.queue_thread);
-
sas_eh_handle_resets(shost);
/* now link into libata eh --- if we have any ata devices */
return 0;
}
-/* ---------- Task Collector Thread implementation ---------- */
-
-static void sas_queue(struct sas_ha_struct *sas_ha)
-{
- struct scsi_core *core = &sas_ha->core;
- unsigned long flags;
- LIST_HEAD(q);
- int can_queue;
- int res;
- struct sas_internal *i = to_sas_internal(core->shost->transportt);
-
- mutex_lock(&core->task_queue_flush);
- spin_lock_irqsave(&core->task_queue_lock, flags);
- while (!kthread_should_stop() &&
- !list_empty(&core->task_queue) &&
- !test_bit(SAS_HA_FROZEN, &sas_ha->state)) {
-
- can_queue = sas_ha->lldd_queue_size - core->task_queue_size;
- if (can_queue >= 0) {
- can_queue = core->task_queue_size;
- list_splice_init(&core->task_queue, &q);
- } else {
- struct list_head *a, *n;
-
- can_queue = sas_ha->lldd_queue_size;
- list_for_each_safe(a, n, &core->task_queue) {
- list_move_tail(a, &q);
- if (--can_queue == 0)
- break;
- }
- can_queue = sas_ha->lldd_queue_size;
- }
- core->task_queue_size -= can_queue;
- spin_unlock_irqrestore(&core->task_queue_lock, flags);
- {
- struct sas_task *task = list_entry(q.next,
- struct sas_task,
- list);
- list_del_init(&q);
- res = i->dft->lldd_execute_task(task, can_queue,
- GFP_KERNEL);
- if (unlikely(res))
- __list_add(&q, task->list.prev, &task->list);
- }
- spin_lock_irqsave(&core->task_queue_lock, flags);
- if (res) {
- list_splice_init(&q, &core->task_queue); /*at head*/
- core->task_queue_size += can_queue;
- }
- }
- spin_unlock_irqrestore(&core->task_queue_lock, flags);
- mutex_unlock(&core->task_queue_flush);
-}
-
-/**
- * sas_queue_thread -- The Task Collector thread
- * @_sas_ha: pointer to struct sas_ha
- */
-static int sas_queue_thread(void *_sas_ha)
-{
- struct sas_ha_struct *sas_ha = _sas_ha;
-
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
- sas_queue(sas_ha);
- if (kthread_should_stop())
- break;
- }
-
- return 0;
-}
-
-int sas_init_queue(struct sas_ha_struct *sas_ha)
-{
- struct scsi_core *core = &sas_ha->core;
-
- spin_lock_init(&core->task_queue_lock);
- mutex_init(&core->task_queue_flush);
- core->task_queue_size = 0;
- INIT_LIST_HEAD(&core->task_queue);
-
- core->queue_thread = kthread_run(sas_queue_thread, sas_ha,
- "sas_queue_%d", core->shost->host_no);
- if (IS_ERR(core->queue_thread))
- return PTR_ERR(core->queue_thread);
- return 0;
-}
-
-void sas_shutdown_queue(struct sas_ha_struct *sas_ha)
-{
- unsigned long flags;
- struct scsi_core *core = &sas_ha->core;
- struct sas_task *task, *n;
-
- kthread_stop(core->queue_thread);
-
- if (!list_empty(&core->task_queue))
- SAS_DPRINTK("HA: %llx: scsi core task queue is NOT empty!?\n",
- SAS_ADDR(sas_ha->sas_addr));
-
- spin_lock_irqsave(&core->task_queue_lock, flags);
- list_for_each_entry_safe(task, n, &core->task_queue, list) {
- struct scsi_cmnd *cmd = task->uldd_task;
-
- list_del_init(&task->list);
-
- ASSIGN_SAS_TASK(cmd, NULL);
- sas_free_task(task);
- cmd->result = DID_ABORT << 16;
- cmd->scsi_done(cmd);
- }
- spin_unlock_irqrestore(&core->task_queue_lock, flags);
-}
-
/*
* Tell an upper layer that it needs to initiate an abort for a given task.
* This should only ever be called by an LLDD.
#include "mv_sas.h"
-static int lldd_max_execute_num = 1;
-module_param_named(collector, lldd_max_execute_num, int, S_IRUGO);
-MODULE_PARM_DESC(collector, "\n"
- "\tIf greater than one, tells the SAS Layer to run in Task Collector\n"
- "\tMode. If 1 or 0, tells the SAS Layer to run in Direct Mode.\n"
- "\tThe mvsas SAS LLDD supports both modes.\n"
- "\tDefault: 1 (Direct Mode).\n");
-
int interrupt_coalescing = 0x80;
static struct scsi_transport_template *mvs_stt;
-struct kmem_cache *mvs_task_list_cache;
static const struct mvs_chip_info mvs_chips[] = {
[chip_6320] = { 1, 2, 0x400, 17, 16, 6, 9, &mvs_64xx_dispatch, },
[chip_6440] = { 1, 4, 0x400, 17, 16, 6, 9, &mvs_64xx_dispatch, },
sha->num_phys = nr_core * chip_info->n_phy;
- sha->lldd_max_execute_num = lldd_max_execute_num;
-
if (mvi->flags & MVF_FLAG_SOC)
can_queue = MVS_SOC_CAN_QUEUE;
else
can_queue = MVS_CHIP_SLOT_SZ;
- sha->lldd_queue_size = can_queue;
shost->sg_tablesize = min_t(u16, SG_ALL, MVS_MAX_SG);
shost->can_queue = can_queue;
mvi->shost->cmd_per_lun = MVS_QUEUE_SIZE;
if (!mvs_stt)
return -ENOMEM;
- mvs_task_list_cache = kmem_cache_create("mvs_task_list", sizeof(struct mvs_task_list),
- 0, SLAB_HWCACHE_ALIGN, NULL);
- if (!mvs_task_list_cache) {
- rc = -ENOMEM;
- mv_printk("%s: mvs_task_list_cache alloc failed! \n", __func__);
- goto err_out;
- }
-
rc = pci_register_driver(&mvs_pci_driver);
-
if (rc)
goto err_out;
{
pci_unregister_driver(&mvs_pci_driver);
sas_release_transport(mvs_stt);
- kmem_cache_destroy(mvs_task_list_cache);
}
struct device_attribute *mvst_host_attrs[] = {
return rc;
}
-static struct mvs_task_list *mvs_task_alloc_list(int *num, gfp_t gfp_flags)
-{
- struct mvs_task_list *first = NULL;
-
- for (; *num > 0; --*num) {
- struct mvs_task_list *mvs_list = kmem_cache_zalloc(mvs_task_list_cache, gfp_flags);
-
- if (!mvs_list)
- break;
-
- INIT_LIST_HEAD(&mvs_list->list);
- if (!first)
- first = mvs_list;
- else
- list_add_tail(&mvs_list->list, &first->list);
-
- }
-
- return first;
-}
-
-static inline void mvs_task_free_list(struct mvs_task_list *mvs_list)
-{
- LIST_HEAD(list);
- struct list_head *pos, *a;
- struct mvs_task_list *mlist = NULL;
-
- __list_add(&list, mvs_list->list.prev, &mvs_list->list);
-
- list_for_each_safe(pos, a, &list) {
- list_del_init(pos);
- mlist = list_entry(pos, struct mvs_task_list, list);
- kmem_cache_free(mvs_task_list_cache, mlist);
- }
-}
-
-static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
+static int mvs_task_exec(struct sas_task *task, gfp_t gfp_flags,
struct completion *completion, int is_tmf,
struct mvs_tmf_task *tmf)
{
return rc;
}
-static int mvs_collector_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
- struct completion *completion, int is_tmf,
- struct mvs_tmf_task *tmf)
+int mvs_queue_command(struct sas_task *task, gfp_t gfp_flags)
{
- struct domain_device *dev = task->dev;
- struct mvs_prv_info *mpi = dev->port->ha->lldd_ha;
- struct mvs_info *mvi = NULL;
- struct sas_task *t = task;
- struct mvs_task_list *mvs_list = NULL, *a;
- LIST_HEAD(q);
- int pass[2] = {0};
- u32 rc = 0;
- u32 n = num;
- unsigned long flags = 0;
-
- mvs_list = mvs_task_alloc_list(&n, gfp_flags);
- if (n) {
- printk(KERN_ERR "%s: mvs alloc list failed.\n", __func__);
- rc = -ENOMEM;
- goto free_list;
- }
-
- __list_add(&q, mvs_list->list.prev, &mvs_list->list);
-
- list_for_each_entry(a, &q, list) {
- a->task = t;
- t = list_entry(t->list.next, struct sas_task, list);
- }
-
- list_for_each_entry(a, &q , list) {
-
- t = a->task;
- mvi = ((struct mvs_device *)t->dev->lldd_dev)->mvi_info;
-
- spin_lock_irqsave(&mvi->lock, flags);
- rc = mvs_task_prep(t, mvi, is_tmf, tmf, &pass[mvi->id]);
- if (rc)
- dev_printk(KERN_ERR, mvi->dev, "mvsas exec failed[%d]!\n", rc);
- spin_unlock_irqrestore(&mvi->lock, flags);
- }
-
- if (likely(pass[0]))
- MVS_CHIP_DISP->start_delivery(mpi->mvi[0],
- (mpi->mvi[0]->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
-
- if (likely(pass[1]))
- MVS_CHIP_DISP->start_delivery(mpi->mvi[1],
- (mpi->mvi[1]->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
-
- list_del_init(&q);
-
-free_list:
- if (mvs_list)
- mvs_task_free_list(mvs_list);
-
- return rc;
-}
-
-int mvs_queue_command(struct sas_task *task, const int num,
- gfp_t gfp_flags)
-{
- struct mvs_device *mvi_dev = task->dev->lldd_dev;
- struct sas_ha_struct *sas = mvi_dev->mvi_info->sas;
-
- if (sas->lldd_max_execute_num < 2)
- return mvs_task_exec(task, num, gfp_flags, NULL, 0, NULL);
- else
- return mvs_collector_task_exec(task, num, gfp_flags, NULL, 0, NULL);
+ return mvs_task_exec(task, gfp_flags, NULL, 0, NULL);
}
static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
task->slow_task->timer.expires = jiffies + MVS_TASK_TIMEOUT*HZ;
add_timer(&task->slow_task->timer);
- res = mvs_task_exec(task, 1, GFP_KERNEL, NULL, 1, tmf);
+ res = mvs_task_exec(task, GFP_KERNEL, NULL, 1, tmf);
if (res) {
del_timer(&task->slow_task->timer);
extern struct mvs_info *tgt_mvi;
extern const struct mvs_dispatch mvs_64xx_dispatch;
extern const struct mvs_dispatch mvs_94xx_dispatch;
-extern struct kmem_cache *mvs_task_list_cache;
#define DEV_IS_EXPANDER(type) \
((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
int n_elem;
};
-struct mvs_task_list {
- struct sas_task *task;
- struct list_head list;
-};
-
-
/******************** function prototype *********************/
void mvs_get_sas_addr(void *buf, u32 buflen);
void mvs_tag_clear(struct mvs_info *mvi, u32 tag);
u32 off_hi, u64 sas_addr);
void mvs_scan_start(struct Scsi_Host *shost);
int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time);
-int mvs_queue_command(struct sas_task *task, const int num,
- gfp_t gfp_flags);
+int mvs_queue_command(struct sas_task *task, gfp_t gfp_flags);
int mvs_abort_task(struct sas_task *task);
int mvs_abort_task_set(struct domain_device *dev, u8 *lun);
int mvs_clear_aca(struct domain_device *dev, u8 *lun);
sha->lldd_module = THIS_MODULE;
sha->sas_addr = &pm8001_ha->sas_addr[0];
sha->num_phys = chip_info->n_phy;
- sha->lldd_max_execute_num = 1;
- sha->lldd_queue_size = PM8001_CAN_QUEUE;
sha->core.shost = shost;
}
*/
#define DEV_IS_GONE(pm8001_dev) \
((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
-static int pm8001_task_exec(struct sas_task *task, const int num,
+static int pm8001_task_exec(struct sas_task *task,
gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
{
struct domain_device *dev = task->dev;
struct sas_task *t = task;
struct pm8001_ccb_info *ccb;
u32 tag = 0xdeadbeef, rc, n_elem = 0;
- u32 n = num;
unsigned long flags = 0;
if (!dev->port) {
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
t->task_done(t);
spin_lock_irqsave(&pm8001_ha->lock, flags);
- if (n > 1)
- t = list_entry(t->list.next,
- struct sas_task, list);
continue;
} else {
struct task_status_struct *ts = &t->task_status;
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_PHY_DOWN;
t->task_done(t);
- if (n > 1)
- t = list_entry(t->list.next,
- struct sas_task, list);
continue;
}
}
t->task_state_flags |= SAS_TASK_AT_INITIATOR;
spin_unlock(&t->task_state_lock);
pm8001_dev->running_req++;
- if (n > 1)
- t = list_entry(t->list.next, struct sas_task, list);
- } while (--n);
+ } while (0);
rc = 0;
goto out_done;
* pm8001_queue_command - register for upper layer used, all IO commands sent
* to HBA are from this interface.
* @task: the task to be execute.
- * @num: if can_queue great than 1, the task can be queued up. for SMP task,
- * we always execute one one time
* @gfp_flags: gfp_flags
*/
-int pm8001_queue_command(struct sas_task *task, const int num,
- gfp_t gfp_flags)
+int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags)
{
- return pm8001_task_exec(task, num, gfp_flags, 0, NULL);
+ return pm8001_task_exec(task, gfp_flags, 0, NULL);
}
/**
task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
add_timer(&task->slow_task->timer);
- res = pm8001_task_exec(task, 1, GFP_KERNEL, 1, tmf);
+ res = pm8001_task_exec(task, GFP_KERNEL, 1, tmf);
if (res) {
del_timer(&task->slow_task->timer);
void *funcdata);
void pm8001_scan_start(struct Scsi_Host *shost);
int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time);
-int pm8001_queue_command(struct sas_task *task, const int num,
- gfp_t gfp_flags);
+int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags);
int pm8001_abort_task(struct sas_task *task);
int pm8001_abort_task_set(struct domain_device *dev, u8 *lun);
int pm8001_clear_aca(struct domain_device *dev, u8 *lun);
struct scsi_core {
struct Scsi_Host *shost;
- struct mutex task_queue_flush;
- spinlock_t task_queue_lock;
- struct list_head task_queue;
- int task_queue_size;
-
- struct task_struct *queue_thread;
};
struct sas_ha_event {
struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
int num_phys; /* must be set, gt 0, static */
- /* The class calls this to send a task for execution. */
- int lldd_max_execute_num;
- int lldd_queue_size;
int strict_wide_ports; /* both sas_addr and attached_sas_addr must match
* their siblings when forming wide ports */
struct sas_task {
struct domain_device *dev;
- struct list_head list;
spinlock_t task_state_lock;
unsigned task_state_flags;
int (*lldd_dev_found)(struct domain_device *);
void (*lldd_dev_gone)(struct domain_device *);
- int (*lldd_execute_task)(struct sas_task *, int num,
- gfp_t gfp_flags);
+ int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags);
/* Task Management Functions. Must be called from process context. */
int (*lldd_abort_task)(struct sas_task *);
int sas_set_phy_speed(struct sas_phy *phy,
struct sas_phy_linkrates *rates);
int sas_phy_reset(struct sas_phy *phy, int hard_reset);
-int sas_queue_up(struct sas_task *task);
extern int sas_queuecommand(struct Scsi_Host * ,struct scsi_cmnd *);
extern int sas_target_alloc(struct scsi_target *);
extern int sas_slave_configure(struct scsi_device *);
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff