bnx2x: Fix LED behavior

This fix resolve two problems seen regarding LED:
1. LED doesn't flash during port identification.
2. Traffic LED sometimes do not blink.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 45255bdc513604f69460508705fd00d926229c1b..d8f6eff2d6b476efae801930a6d9495aa021cdca 100644 (file)
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -5922,20 +5922,30 @@ int bnx2x_set_led(struct link_params *params,
                                tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
                                EMAC_WR(bp, EMAC_REG_EMAC_LED,
                                        (tmp | EMAC_LED_OVERRIDE));
-                               return rc;
+                               /*
+                                * return here without enabling traffic
+                                * LED blink andsetting rate in ON mode.
+                                * In oper mode, enabling LED blink
+                                * and setting rate is needed.
+                                */
+                               if (mode == LED_MODE_ON)
+                                       return rc;
                        }
-               } else if (SINGLE_MEDIA_DIRECT(params) &&
-                          (CHIP_IS_E1x(bp) ||
-                           CHIP_IS_E2(bp))) {
+               } else if (SINGLE_MEDIA_DIRECT(params)) {
                        /*
                         * This is a work-around for HW issue found when link
                         * is up in CL73
                         */
-                       REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
                        REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
-               } else {
+                       if (CHIP_IS_E1x(bp) ||
+                           CHIP_IS_E2(bp) ||
+                           (mode == LED_MODE_ON))
+                               REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
+                       else
+                               REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
+                                      hw_led_mode);
+               } else
                        REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode);
-               }
 
                REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0);
                /* Set blinking rate to ~15.9Hz */