dl2k: use standard #defines from mii.h.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index 3fa91408532f92ffd54155d6d4ad43464fe09649..b2dc2c81a147f66581d1302f1b8eb1ee92346288 100644 (file)
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -1428,7 +1428,7 @@ mii_wait_link (struct net_device *dev, int wait)
 
        do {
                bmsr = mii_read (dev, phy_addr, MII_BMSR);
-               if (bmsr & MII_BMSR_LINK_STATUS)
+               if (bmsr & BMSR_LSTATUS)
                        return 0;
                mdelay (1);
        } while (--wait > 0);
@@ -1449,60 +1449,60 @@ mii_get_media (struct net_device *dev)
 
        bmsr = mii_read (dev, phy_addr, MII_BMSR);
        if (np->an_enable) {
-               if (!(bmsr & MII_BMSR_AN_COMPLETE)) {
+               if (!(bmsr & BMSR_ANEGCOMPLETE)) {
                        /* Auto-Negotiation not completed */
                        return -1;
                }
-               negotiate = mii_read (dev, phy_addr, MII_ANAR) &
-                       mii_read (dev, phy_addr, MII_ANLPAR);
-               mscr = mii_read (dev, phy_addr, MII_MSCR);
-               mssr = mii_read (dev, phy_addr, MII_MSSR);
-               if (mscr & MII_MSCR_1000BT_FD && mssr & MII_MSSR_LP_1000BT_FD) {
+               negotiate = mii_read (dev, phy_addr, MII_ADVERTISE) &
+                       mii_read (dev, phy_addr, MII_LPA);
+               mscr = mii_read (dev, phy_addr, MII_CTRL1000);
+               mssr = mii_read (dev, phy_addr, MII_STAT1000);
+               if (mscr & ADVERTISE_1000FULL && mssr & LPA_1000FULL) {
                        np->speed = 1000;
                        np->full_duplex = 1;
                        printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");
-               } else if (mscr & MII_MSCR_1000BT_HD && mssr & MII_MSSR_LP_1000BT_HD) {
+               } else if (mscr & ADVERTISE_1000HALF && mssr & LPA_1000HALF) {
                        np->speed = 1000;
                        np->full_duplex = 0;
                        printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n");
-               } else if (negotiate & MII_ANAR_100BX_FD) {
+               } else if (negotiate & ADVERTISE_100FULL) {
                        np->speed = 100;
                        np->full_duplex = 1;
                        printk (KERN_INFO "Auto 100 Mbps, Full duplex\n");
-               } else if (negotiate & MII_ANAR_100BX_HD) {
+               } else if (negotiate & ADVERTISE_100HALF) {
                        np->speed = 100;
                        np->full_duplex = 0;
                        printk (KERN_INFO "Auto 100 Mbps, Half duplex\n");
-               } else if (negotiate & MII_ANAR_10BT_FD) {
+               } else if (negotiate & ADVERTISE_10FULL) {
                        np->speed = 10;
                        np->full_duplex = 1;
                        printk (KERN_INFO "Auto 10 Mbps, Full duplex\n");
-               } else if (negotiate & MII_ANAR_10BT_HD) {
+               } else if (negotiate & ADVERTISE_10HALF) {
                        np->speed = 10;
                        np->full_duplex = 0;
                        printk (KERN_INFO "Auto 10 Mbps, Half duplex\n");
                }
-               if (negotiate & MII_ANAR_PAUSE) {
+               if (negotiate & ADVERTISE_PAUSE_CAP) {
                        np->tx_flow &= 1;
                        np->rx_flow &= 1;
-               } else if (negotiate & MII_ANAR_ASYMMETRIC) {
+               } else if (negotiate & ADVERTISE_PAUSE_ASYM) {
                        np->tx_flow = 0;
                        np->rx_flow &= 1;
                }
                /* else tx_flow, rx_flow = user select  */
        } else {
                __u16 bmcr = mii_read (dev, phy_addr, MII_BMCR);
-               switch (bmcr & (MII_BMCR_SPEED_100 | MII_BMCR_SPEED_1000)) {
-               case MII_BMCR_SPEED_1000:
+               switch (bmcr & (BMCR_SPEED100 | BMCR_SPEED1000)) {
+               case BMCR_SPEED1000:
                        printk (KERN_INFO "Operating at 1000 Mbps, ");
                        break;
-               case MII_BMCR_SPEED_100:
+               case BMCR_SPEED100:
                        printk (KERN_INFO "Operating at 100 Mbps, ");
                        break;
                case 0:
                        printk (KERN_INFO "Operating at 10 Mbps, ");
                }
-               if (bmcr & MII_BMCR_DUPLEX_MODE) {
+               if (bmcr & BMCR_FULLDPLX) {
                        printk (KERN_CONT "Full duplex\n");
                } else {
                        printk (KERN_CONT "Half duplex\n");
@@ -1536,24 +1536,22 @@ mii_set_media (struct net_device *dev)
        if (np->an_enable) {
                /* Advertise capabilities */
                bmsr = mii_read (dev, phy_addr, MII_BMSR);
-               anar = mii_read (dev, phy_addr, MII_ANAR) &
-                            ~MII_ANAR_100BX_FD &
-                            ~MII_ANAR_100BX_HD &
-                            ~MII_ANAR_100BT4 &
-                            ~MII_ANAR_10BT_FD &
-                            ~MII_ANAR_10BT_HD;
-               if (bmsr & MII_BMSR_100BX_FD)
-                       anar |= MII_ANAR_100BX_FD;
-               if (bmsr & MII_BMSR_100BX_HD)
-                       anar |= MII_ANAR_100BX_HD;
-               if (bmsr & MII_BMSR_100BT4)
-                       anar |= MII_ANAR_100BT4;
-               if (bmsr & MII_BMSR_10BT_FD)
-                       anar |= MII_ANAR_10BT_FD;
-               if (bmsr & MII_BMSR_10BT_HD)
-                       anar |= MII_ANAR_10BT_HD;
-               anar |= MII_ANAR_PAUSE | MII_ANAR_ASYMMETRIC;
-               mii_write (dev, phy_addr, MII_ANAR, anar);
+               anar = mii_read (dev, phy_addr, MII_ADVERTISE) &
+                       ~(ADVERTISE_100FULL | ADVERTISE_10FULL |
+                         ADVERTISE_100HALF | ADVERTISE_10HALF |
+                         ADVERTISE_100BASE4);
+               if (bmsr & BMSR_100FULL)
+                       anar |= ADVERTISE_100FULL;
+               if (bmsr & BMSR_100HALF)
+                       anar |= ADVERTISE_100HALF;
+               if (bmsr & BMSR_100BASE4)
+                       anar |= ADVERTISE_100BASE4;
+               if (bmsr & BMSR_10FULL)
+                       anar |= ADVERTISE_10FULL;
+               if (bmsr & BMSR_10HALF)
+                       anar |= ADVERTISE_10HALF;
+               anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+               mii_write (dev, phy_addr, MII_ADVERTISE, anar);
 
                /* Enable Auto crossover */
                pscr = mii_read (dev, phy_addr, MII_PHY_SCR);
@@ -1561,8 +1559,8 @@ mii_set_media (struct net_device *dev)
                mii_write (dev, phy_addr, MII_PHY_SCR, pscr);
 
                /* Soft reset PHY */
-               mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET);
-               bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN | MII_BMCR_RESET;
+               mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET);
+               bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET;
                mii_write (dev, phy_addr, MII_BMCR, bmcr);
                mdelay(1);
        } else {
@@ -1574,7 +1572,7 @@ mii_set_media (struct net_device *dev)
 
                /* 2) PHY Reset */
                bmcr = mii_read (dev, phy_addr, MII_BMCR);
-               bmcr |= MII_BMCR_RESET;
+               bmcr |= BMCR_RESET;
                mii_write (dev, phy_addr, MII_BMCR, bmcr);
 
                /* 3) Power Down */
@@ -1583,25 +1581,25 @@ mii_set_media (struct net_device *dev)
                mdelay (100);   /* wait a certain time */
 
                /* 4) Advertise nothing */
-               mii_write (dev, phy_addr, MII_ANAR, 0);
+               mii_write (dev, phy_addr, MII_ADVERTISE, 0);
 
                /* 5) Set media and Power Up */
-               bmcr = MII_BMCR_POWER_DOWN;
+               bmcr = BMCR_PDOWN;
                if (np->speed == 100) {
-                       bmcr |= MII_BMCR_SPEED_100;
+                       bmcr |= BMCR_SPEED100;
                        printk (KERN_INFO "Manual 100 Mbps, ");
                } else if (np->speed == 10) {
                        printk (KERN_INFO "Manual 10 Mbps, ");
                }
                if (np->full_duplex) {
-                       bmcr |= MII_BMCR_DUPLEX_MODE;
+                       bmcr |= BMCR_FULLDPLX;
                        printk (KERN_CONT "Full duplex\n");
                } else {
                        printk (KERN_CONT "Half duplex\n");
                }
 #if 0
                /* Set 1000BaseT Master/Slave setting */
-               mscr = mii_read (dev, phy_addr, MII_MSCR);
+               mscr = mii_read (dev, phy_addr, MII_CTRL1000);
                mscr |= MII_MSCR_CFG_ENABLE;
                mscr &= ~MII_MSCR_CFG_VALUE = 0;
 #endif
@@ -1624,7 +1622,7 @@ mii_get_media_pcs (struct net_device *dev)
 
        bmsr = mii_read (dev, phy_addr, PCS_BMSR);
        if (np->an_enable) {
-               if (!(bmsr & MII_BMSR_AN_COMPLETE)) {
+               if (!(bmsr & BMSR_ANEGCOMPLETE)) {
                        /* Auto-Negotiation not completed */
                        return -1;
                }
@@ -1649,7 +1647,7 @@ mii_get_media_pcs (struct net_device *dev)
        } else {
                __u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR);
                printk (KERN_INFO "Operating at 1000 Mbps, ");
-               if (bmcr & MII_BMCR_DUPLEX_MODE) {
+               if (bmcr & BMCR_FULLDPLX) {
                        printk (KERN_CONT "Full duplex\n");
                } else {
                        printk (KERN_CONT "Half duplex\n");
@@ -1682,7 +1680,7 @@ mii_set_media_pcs (struct net_device *dev)
        if (np->an_enable) {
                /* Advertise capabilities */
                esr = mii_read (dev, phy_addr, PCS_ESR);
-               anar = mii_read (dev, phy_addr, MII_ANAR) &
+               anar = mii_read (dev, phy_addr, MII_ADVERTISE) &
                        ~PCS_ANAR_HALF_DUPLEX &
                        ~PCS_ANAR_FULL_DUPLEX;
                if (esr & (MII_ESR_1000BT_HD | MII_ESR_1000BX_HD))
@@ -1690,22 +1688,21 @@ mii_set_media_pcs (struct net_device *dev)
                if (esr & (MII_ESR_1000BT_FD | MII_ESR_1000BX_FD))
                        anar |= PCS_ANAR_FULL_DUPLEX;
                anar |= PCS_ANAR_PAUSE | PCS_ANAR_ASYMMETRIC;
-               mii_write (dev, phy_addr, MII_ANAR, anar);
+               mii_write (dev, phy_addr, MII_ADVERTISE, anar);
 
                /* Soft reset PHY */
-               mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET);
-               bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN |
-                      MII_BMCR_RESET;
+               mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET);
+               bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET;
                mii_write (dev, phy_addr, MII_BMCR, bmcr);
                mdelay(1);
        } else {
                /* Force speed setting */
                /* PHY Reset */
-               bmcr = MII_BMCR_RESET;
+               bmcr = BMCR_RESET;
                mii_write (dev, phy_addr, MII_BMCR, bmcr);
                mdelay(10);
                if (np->full_duplex) {
-                       bmcr = MII_BMCR_DUPLEX_MODE;
+                       bmcr = BMCR_FULLDPLX;
                        printk (KERN_INFO "Manual full duplex\n");
                } else {
                        bmcr = 0;
@@ -1715,7 +1712,7 @@ mii_set_media_pcs (struct net_device *dev)
                mdelay(10);
 
                /*  Advertise nothing */
-               mii_write (dev, phy_addr, MII_ANAR, 0);
+               mii_write (dev, phy_addr, MII_ADVERTISE, 0);
        }
        return 0;
 }

diff --git a/drivers/net/ethernet/dlink/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h
index 7caab3d26a9eee8ae6761a2d9f188b8efe33ff14..ba0adcafa55ad71c2dd63098796ce003a4cb6701 100644 (file)
--- a/drivers/net/ethernet/dlink/dl2k.h
+++ b/drivers/net/ethernet/dlink/dl2k.h
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/crc32.h>
 #include <linux/ethtool.h>
+#include <linux/mii.h>
 #include <linux/bitops.h>
 #include <asm/processor.h>     /* Processor type for cache alignment. */
 #include <asm/io.h>
@@ -271,20 +272,9 @@ enum RFS_bits {
 #define MII_RESET_TIME_OUT             10000
 /* MII register */
 enum _mii_reg {
-       MII_BMCR = 0,
-       MII_BMSR = 1,
-       MII_PHY_ID1 = 2,
-       MII_PHY_ID2 = 3,
-       MII_ANAR = 4,
-       MII_ANLPAR = 5,
-       MII_ANER = 6,
-       MII_ANNPT = 7,
-       MII_ANLPRNP = 8,
-       MII_MSCR = 9,
-       MII_MSSR = 10,
-       MII_ESR = 15,
        MII_PHY_SCR = 16,
 };
+
 /* PCS register */
 enum _pcs_reg {
        PCS_BMCR = 0,
@@ -297,102 +287,6 @@ enum _pcs_reg {
        PCS_ESR = 15,
 };
 
-/* Basic Mode Control Register */
-enum _mii_bmcr {
-       MII_BMCR_RESET = 0x8000,
-       MII_BMCR_LOOP_BACK = 0x4000,
-       MII_BMCR_SPEED_LSB = 0x2000,
-       MII_BMCR_AN_ENABLE = 0x1000,
-       MII_BMCR_POWER_DOWN = 0x0800,
-       MII_BMCR_ISOLATE = 0x0400,
-       MII_BMCR_RESTART_AN = 0x0200,
-       MII_BMCR_DUPLEX_MODE = 0x0100,
-       MII_BMCR_COL_TEST = 0x0080,
-       MII_BMCR_SPEED_MSB = 0x0040,
-       MII_BMCR_SPEED_RESERVED = 0x003f,
-       MII_BMCR_SPEED_10 = 0,
-       MII_BMCR_SPEED_100 = MII_BMCR_SPEED_LSB,
-       MII_BMCR_SPEED_1000 = MII_BMCR_SPEED_MSB,
-};
-
-/* Basic Mode Status Register */
-enum _mii_bmsr {
-       MII_BMSR_100BT4 = 0x8000,
-       MII_BMSR_100BX_FD = 0x4000,
-       MII_BMSR_100BX_HD = 0x2000,
-       MII_BMSR_10BT_FD = 0x1000,
-       MII_BMSR_10BT_HD = 0x0800,
-       MII_BMSR_100BT2_FD = 0x0400,
-       MII_BMSR_100BT2_HD = 0x0200,
-       MII_BMSR_EXT_STATUS = 0x0100,
-       MII_BMSR_PREAMBLE_SUPP = 0x0040,
-       MII_BMSR_AN_COMPLETE = 0x0020,
-       MII_BMSR_REMOTE_FAULT = 0x0010,
-       MII_BMSR_AN_ABILITY = 0x0008,
-       MII_BMSR_LINK_STATUS = 0x0004,
-       MII_BMSR_JABBER_DETECT = 0x0002,
-       MII_BMSR_EXT_CAP = 0x0001,
-};
-
-/* ANAR */
-enum _mii_anar {
-       MII_ANAR_NEXT_PAGE = 0x8000,
-       MII_ANAR_REMOTE_FAULT = 0x4000,
-       MII_ANAR_ASYMMETRIC = 0x0800,
-       MII_ANAR_PAUSE = 0x0400,
-       MII_ANAR_100BT4 = 0x0200,
-       MII_ANAR_100BX_FD = 0x0100,
-       MII_ANAR_100BX_HD = 0x0080,
-       MII_ANAR_10BT_FD = 0x0020,
-       MII_ANAR_10BT_HD = 0x0010,
-       MII_ANAR_SELECTOR = 0x001f,
-       MII_IEEE8023_CSMACD = 0x0001,
-};
-
-/* ANLPAR */
-enum _mii_anlpar {
-       MII_ANLPAR_NEXT_PAGE = MII_ANAR_NEXT_PAGE,
-       MII_ANLPAR_REMOTE_FAULT = MII_ANAR_REMOTE_FAULT,
-       MII_ANLPAR_ASYMMETRIC = MII_ANAR_ASYMMETRIC,
-       MII_ANLPAR_PAUSE = MII_ANAR_PAUSE,
-       MII_ANLPAR_100BT4 = MII_ANAR_100BT4,
-       MII_ANLPAR_100BX_FD = MII_ANAR_100BX_FD,
-       MII_ANLPAR_100BX_HD = MII_ANAR_100BX_HD,
-       MII_ANLPAR_10BT_FD = MII_ANAR_10BT_FD,
-       MII_ANLPAR_10BT_HD = MII_ANAR_10BT_HD,
-       MII_ANLPAR_SELECTOR = MII_ANAR_SELECTOR,
-};
-
-/* Auto-Negotiation Expansion Register */
-enum _mii_aner {
-       MII_ANER_PAR_DETECT_FAULT = 0x0010,
-       MII_ANER_LP_NEXTPAGABLE = 0x0008,
-       MII_ANER_NETXTPAGABLE = 0x0004,
-       MII_ANER_PAGE_RECEIVED = 0x0002,
-       MII_ANER_LP_NEGOTIABLE = 0x0001,
-};
-
-/* MASTER-SLAVE Control Register */
-enum _mii_mscr {
-       MII_MSCR_TEST_MODE = 0xe000,
-       MII_MSCR_CFG_ENABLE = 0x1000,
-       MII_MSCR_CFG_VALUE = 0x0800,
-       MII_MSCR_PORT_VALUE = 0x0400,
-       MII_MSCR_1000BT_FD = 0x0200,
-       MII_MSCR_1000BT_HD = 0X0100,
-};
-
-/* MASTER-SLAVE Status Register */
-enum _mii_mssr {
-       MII_MSSR_CFG_FAULT = 0x8000,
-       MII_MSSR_CFG_RES = 0x4000,
-       MII_MSSR_LOCAL_RCV_STATUS = 0x2000,
-       MII_MSSR_REMOTE_RCVR = 0x1000,
-       MII_MSSR_LP_1000BT_FD = 0x0800,
-       MII_MSSR_LP_1000BT_HD = 0x0400,
-       MII_MSSR_IDLE_ERR_COUNT = 0x00ff,
-};
-
 /* IEEE Extened Status Register */
 enum _mii_esr {
        MII_ESR_1000BX_FD = 0x8000,