pinctrl: sunxi: Change mux setting on PI irq pins

While I was testing irq's on the cubietruck I found a couple of
not working irq pins. Further diving into the problem it opened
up a mess called "manual".

This so called manual (A20 user manual v1.3 dated 2014-10-10) says:

Pin overview:
    Page 237:       EINT26 is on mux 5.
    Page 288:       EINT26 is on mux 6.

The manual is so contradicting that further tests had to be made
to see which of the 2 statements where correct.

This patch is based on actual outcome of these tests and not what
the manual says.

Test procedure used:

Connect a 1 pulse per second (GPS) line to the pin.

echo pin### > /sys/class/gpio/export
echo in > /sys/class/gpio/gpio###/direction
echo rising > /sys/class/gpio/gpio###/edge

Check /proc/interrupts if a irq was attached and if irq's where
received.

Hardware used:
Henry Paulissen: Cubietruck
Andere Przywara: BananaPi M1

Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Henry Paulissen <henry@nitronetworks.nl>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
index 25748b410f282d3ef109cf64faa17b853307621f..435ad30f45dbf7a46ac8ff299efe66f60b4e405e 100644 (file)
--- a/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c
@@ -956,65 +956,65 @@ static const struct sunxi_desc_pin sun7i_a20_pins[] = {
                  SUNXI_FUNCTION(0x1, "gpio_out"),
                  SUNXI_FUNCTION(0x2, "spi0"),          /* CS0 */
                  SUNXI_FUNCTION(0x3, "uart5"),         /* TX */
-                 SUNXI_FUNCTION_IRQ(0x5, 22)),         /* EINT22 */
+                 SUNXI_FUNCTION_IRQ(0x6, 22)),         /* EINT22 */
        SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 11),
                  SUNXI_FUNCTION(0x0, "gpio_in"),
                  SUNXI_FUNCTION(0x1, "gpio_out"),
                  SUNXI_FUNCTION(0x2, "spi0"),          /* CLK */
                  SUNXI_FUNCTION(0x3, "uart5"),         /* RX */
-                 SUNXI_FUNCTION_IRQ(0x5, 23)),         /* EINT23 */
+                 SUNXI_FUNCTION_IRQ(0x6, 23)),         /* EINT23 */
        SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 12),
                  SUNXI_FUNCTION(0x0, "gpio_in"),
                  SUNXI_FUNCTION(0x1, "gpio_out"),
                  SUNXI_FUNCTION(0x2, "spi0"),          /* MOSI */
                  SUNXI_FUNCTION(0x3, "uart6"),         /* TX */
                  SUNXI_FUNCTION(0x4, "clk_out_a"),     /* CLK_OUT_A */
-                 SUNXI_FUNCTION_IRQ(0x5, 24)),         /* EINT24 */
+                 SUNXI_FUNCTION_IRQ(0x6, 24)),         /* EINT24 */
        SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 13),
                  SUNXI_FUNCTION(0x0, "gpio_in"),
                  SUNXI_FUNCTION(0x1, "gpio_out"),
                  SUNXI_FUNCTION(0x2, "spi0"),          /* MISO */
                  SUNXI_FUNCTION(0x3, "uart6"),         /* RX */
                  SUNXI_FUNCTION(0x4, "clk_out_b"),     /* CLK_OUT_B */
-                 SUNXI_FUNCTION_IRQ(0x5, 25)),         /* EINT25 */
+                 SUNXI_FUNCTION_IRQ(0x6, 25)),         /* EINT25 */
        SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 14),
                  SUNXI_FUNCTION(0x0, "gpio_in"),
                  SUNXI_FUNCTION(0x1, "gpio_out"),
                  SUNXI_FUNCTION(0x2, "spi0"),          /* CS1 */
                  SUNXI_FUNCTION(0x3, "ps2"),           /* SCK1 */
                  SUNXI_FUNCTION(0x4, "timer4"),        /* TCLKIN0 */
-                 SUNXI_FUNCTION_IRQ(0x5, 26)),         /* EINT26 */
+                 SUNXI_FUNCTION_IRQ(0x6, 26)),         /* EINT26 */
        SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 15),
                  SUNXI_FUNCTION(0x0, "gpio_in"),
                  SUNXI_FUNCTION(0x1, "gpio_out"),
                  SUNXI_FUNCTION(0x2, "spi1"),          /* CS1 */
                  SUNXI_FUNCTION(0x3, "ps2"),           /* SDA1 */
                  SUNXI_FUNCTION(0x4, "timer5"),        /* TCLKIN1 */
-                 SUNXI_FUNCTION_IRQ(0x5, 27)),         /* EINT27 */
+                 SUNXI_FUNCTION_IRQ(0x6, 27)),         /* EINT27 */
        SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 16),
                  SUNXI_FUNCTION(0x0, "gpio_in"),
                  SUNXI_FUNCTION(0x1, "gpio_out"),
                  SUNXI_FUNCTION(0x2, "spi1"),          /* CS0 */
                  SUNXI_FUNCTION(0x3, "uart2"),         /* RTS */
-                 SUNXI_FUNCTION_IRQ(0x5, 28)),         /* EINT28 */
+                 SUNXI_FUNCTION_IRQ(0x6, 28)),         /* EINT28 */
        SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 17),
                  SUNXI_FUNCTION(0x0, "gpio_in"),
                  SUNXI_FUNCTION(0x1, "gpio_out"),
                  SUNXI_FUNCTION(0x2, "spi1"),          /* CLK */
                  SUNXI_FUNCTION(0x3, "uart2"),         /* CTS */
-                 SUNXI_FUNCTION_IRQ(0x5, 29)),         /* EINT29 */
+                 SUNXI_FUNCTION_IRQ(0x6, 29)),         /* EINT29 */
        SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 18),
                  SUNXI_FUNCTION(0x0, "gpio_in"),
                  SUNXI_FUNCTION(0x1, "gpio_out"),
                  SUNXI_FUNCTION(0x2, "spi1"),          /* MOSI */
                  SUNXI_FUNCTION(0x3, "uart2"),         /* TX */
-                 SUNXI_FUNCTION_IRQ(0x5, 30)),         /* EINT30 */
+                 SUNXI_FUNCTION_IRQ(0x6, 30)),         /* EINT30 */
        SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 19),
                  SUNXI_FUNCTION(0x0, "gpio_in"),
                  SUNXI_FUNCTION(0x1, "gpio_out"),
                  SUNXI_FUNCTION(0x2, "spi1"),          /* MISO */
                  SUNXI_FUNCTION(0x3, "uart2"),         /* RX */
-                 SUNXI_FUNCTION_IRQ(0x5, 31)),         /* EINT31 */
+                 SUNXI_FUNCTION_IRQ(0x6, 31)),         /* EINT31 */
        SUNXI_PIN(SUNXI_PINCTRL_PIN(I, 20),
                  SUNXI_FUNCTION(0x0, "gpio_in"),
                  SUNXI_FUNCTION(0x1, "gpio_out"),