There is no point on having them separated across 3 files.
At the same time rename USB_CYC_CFG to its proper name US_CYC_CNT
(as per the datasheet).
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
* Registers.
*/
+/*
+ * E2PROM_CSR: PCI EEPROM control register.
+ * RELOAD: Write 1 to reload eeprom content.
+ * TYPE: 0: 93c46, 1:93c66.
+ * LOAD_STATUS: 1:loading, 0:done.
+ */
+#define E2PROM_CSR 0x0004
+#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001)
+#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002)
+#define E2PROM_CSR_DATA_IN FIELD32(0x00000004)
+#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008)
+#define E2PROM_CSR_TYPE FIELD32(0x00000030)
+#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
+#define E2PROM_CSR_RELOAD FIELD32(0x00000080)
+
/*
* OPT_14: Unknown register used by rt3xxx devices.
*/
#define RX_CRX_IDX 0x0298
#define RX_DRX_IDX 0x029c
+/*
+ * USB_DMA_CFG
+ * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
+ * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
+ * PHY_CLEAR: phy watch dog enable.
+ * TX_CLEAR: Clear USB DMA TX path.
+ * TXOP_HALT: Halt TXOP count down when TX buffer is full.
+ * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
+ * RX_BULK_EN: Enable USB DMA Rx.
+ * TX_BULK_EN: Enable USB DMA Tx.
+ * EP_OUT_VALID: OUT endpoint data valid.
+ * RX_BUSY: USB DMA RX FSM busy.
+ * TX_BUSY: USB DMA TX FSM busy.
+ */
+#define USB_DMA_CFG 0x02a0
+#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff)
+#define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00)
+#define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000)
+#define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000)
+#define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000)
+#define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000)
+#define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000)
+#define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000)
+#define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000)
+#define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000)
+#define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000)
+
+/*
+ * US_CYC_CNT
+ */
+#define US_CYC_CNT 0x02a4
+#define US_CYC_CNT_CLOCK_CYCLE FIELD32(0x000000ff)
+
/*
* PBF_SYS_CTRL
* HOST_RAM_WRITE: enable Host program ram write selection
rt2800_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
if (rt2x00_is_usb(rt2x00dev)) {
- rt2800_register_read(rt2x00dev, USB_CYC_CFG, ®);
- rt2x00_set_field32(®, USB_CYC_CFG_CLOCK_CYCLE, 30);
- rt2800_register_write(rt2x00dev, USB_CYC_CFG, reg);
+ rt2800_register_read(rt2x00dev, US_CYC_CNT, ®);
+ rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 30);
+ rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
}
rt2800_register_read(rt2x00dev, HT_FBK_CFG0, ®);
#ifndef RT2800PCI_H
#define RT2800PCI_H
-/*
- * PCI registers.
- */
-
-/*
- * E2PROM_CSR: EEPROM control register.
- * RELOAD: Write 1 to reload eeprom content.
- * TYPE: 0: 93c46, 1:93c66.
- * LOAD_STATUS: 1:loading, 0:done.
- */
-#define E2PROM_CSR 0x0004
-#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001)
-#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002)
-#define E2PROM_CSR_DATA_IN FIELD32(0x00000004)
-#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008)
-#define E2PROM_CSR_TYPE FIELD32(0x00000030)
-#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
-#define E2PROM_CSR_RELOAD FIELD32(0x00000080)
-
/*
* Queue register offset macros
*/
#ifndef RT2800USB_H
#define RT2800USB_H
-/*
- * USB registers.
- */
-
-/*
- * USB_DMA_CFG
- * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
- * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
- * PHY_CLEAR: phy watch dog enable.
- * TX_CLEAR: Clear USB DMA TX path.
- * TXOP_HALT: Halt TXOP count down when TX buffer is full.
- * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
- * RX_BULK_EN: Enable USB DMA Rx.
- * TX_BULK_EN: Enable USB DMA Tx.
- * EP_OUT_VALID: OUT endpoint data valid.
- * RX_BUSY: USB DMA RX FSM busy.
- * TX_BUSY: USB DMA TX FSM busy.
- */
-#define USB_DMA_CFG 0x02a0
-#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff)
-#define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00)
-#define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000)
-#define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000)
-#define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000)
-#define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000)
-#define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000)
-#define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000)
-#define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000)
-#define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000)
-#define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000)
-
-/*
- * USB_CYC_CFG
- */
-#define USB_CYC_CFG 0x02a4
-#define USB_CYC_CFG_CLOCK_CYCLE FIELD32(0x000000ff)
-
/*
* 8051 firmware image.
*/