OMAPFB: Map the newly added omap_video_timings fields with fb sync flags
authorArchit Taneja <archit@ti.com>
Fri, 15 Jun 2012 02:09:47 +0000 (07:39 +0530)
committerTomi Valkeinen <tomi.valkeinen@ti.com>
Fri, 29 Jun 2012 07:15:51 +0000 (10:15 +0300)
Use the newly added fields in omap_video_timings(hsync, vsync and data_enable
logic levels and data, hsync and vsync latching related info) to
configure/retrieve corresponding sync flags in fb_var_screeninfo and
fb_videomode.

Out of the new fields, hsync_level and vsync_level can be mapped to the fb sync
flags FB_SYNC_HOR_HIGH_ACT and FB_SYNC_VERT_HIGH_ACT.

When converting fb mode to omap_video_timings, the fields which don't have an
equivalent parameter in fb are kept as the original values if the panel driver
has a get_timings op, else they are set to default values.

Signed-off-by: Archit Taneja <archit@ti.com>
drivers/video/omap2/omapfb/omapfb-main.c

index 3450ea0966c97e6227145f3ad484f4850f0125ff..5491817ef979a9cd9b9b03a59bf260638e36f07d 100644 (file)
@@ -733,6 +733,10 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
                var->lower_margin = timings.vfp;
                var->hsync_len = timings.hsw;
                var->vsync_len = timings.vsw;
+               var->sync |= timings.hsync_level == OMAPDSS_SIG_ACTIVE_HIGH ?
+                               FB_SYNC_HOR_HIGH_ACT : 0;
+               var->sync |= timings.vsync_level == OMAPDSS_SIG_ACTIVE_HIGH ?
+                               FB_SYNC_VERT_HIGH_ACT : 0;
        } else {
                var->pixclock = 0;
                var->left_margin = 0;
@@ -741,11 +745,11 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
                var->lower_margin = 0;
                var->hsync_len = 0;
                var->vsync_len = 0;
+               var->sync = 0;
        }
 
        /* TODO: get these from panel->config */
        var->vmode              = FB_VMODE_NONINTERLACED;
-       var->sync               = 0;
 
        return 0;
 }
@@ -1993,6 +1997,7 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
 }
 
 static int omapfb_mode_to_timings(const char *mode_str,
+               struct omap_dss_device *display,
                struct omap_video_timings *timings, u8 *bpp)
 {
        struct fb_info *fbi;
@@ -2046,6 +2051,14 @@ static int omapfb_mode_to_timings(const char *mode_str,
                goto err;
        }
 
+       if (display->driver->get_timings) {
+               display->driver->get_timings(display, timings);
+       } else {
+               timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
+               timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH;
+               timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
+       }
+
        timings->pixel_clock = PICOS2KHZ(var->pixclock);
        timings->hbp = var->left_margin;
        timings->hfp = var->right_margin;
@@ -2055,6 +2068,12 @@ static int omapfb_mode_to_timings(const char *mode_str,
        timings->vsw = var->vsync_len;
        timings->x_res = var->xres;
        timings->y_res = var->yres;
+       timings->hsync_level = var->sync & FB_SYNC_HOR_HIGH_ACT ?
+                               OMAPDSS_SIG_ACTIVE_HIGH :
+                               OMAPDSS_SIG_ACTIVE_LOW;
+       timings->vsync_level = var->sync & FB_SYNC_VERT_HIGH_ACT ?
+                               OMAPDSS_SIG_ACTIVE_HIGH :
+                               OMAPDSS_SIG_ACTIVE_LOW;
 
        switch (var->bits_per_pixel) {
        case 16:
@@ -2085,7 +2104,7 @@ static int omapfb_set_def_mode(struct omapfb2_device *fbdev,
        struct omap_video_timings timings, temp_timings;
        struct omapfb_display_data *d;
 
-       r = omapfb_mode_to_timings(mode_str, &timings, &bpp);
+       r = omapfb_mode_to_timings(mode_str, display, &timings, &bpp);
        if (r)
                return r;
 
@@ -2178,8 +2197,17 @@ static int omapfb_parse_def_modes(struct omapfb2_device *fbdev)
 }
 
 static void fb_videomode_to_omap_timings(struct fb_videomode *m,
+               struct omap_dss_device *display,
                struct omap_video_timings *t)
 {
+       if (display->driver->get_timings) {
+               display->driver->get_timings(display, t);
+       } else {
+               t->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
+               t->de_level = OMAPDSS_SIG_ACTIVE_HIGH;
+               t->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
+       }
+
        t->x_res = m->xres;
        t->y_res = m->yres;
        t->pixel_clock = PICOS2KHZ(m->pixclock);
@@ -2189,6 +2217,12 @@ static void fb_videomode_to_omap_timings(struct fb_videomode *m,
        t->vsw = m->vsync_len;
        t->vfp = m->lower_margin;
        t->vbp = m->upper_margin;
+       t->hsync_level = m->sync & FB_SYNC_HOR_HIGH_ACT ?
+                               OMAPDSS_SIG_ACTIVE_HIGH :
+                               OMAPDSS_SIG_ACTIVE_LOW;
+       t->vsync_level = m->sync & FB_SYNC_VERT_HIGH_ACT ?
+                               OMAPDSS_SIG_ACTIVE_HIGH :
+                               OMAPDSS_SIG_ACTIVE_LOW;
 }
 
 static int omapfb_find_best_mode(struct omap_dss_device *display,
@@ -2231,7 +2265,7 @@ static int omapfb_find_best_mode(struct omap_dss_device *display,
                if (m->xres == 2880 || m->xres == 1440)
                        continue;
 
-               fb_videomode_to_omap_timings(m, &t);
+               fb_videomode_to_omap_timings(m, display, &t);
 
                r = display->driver->check_timings(display, &t);
                if (r == 0 && best_xres < m->xres) {
@@ -2245,7 +2279,8 @@ static int omapfb_find_best_mode(struct omap_dss_device *display,
                goto err2;
        }
 
-       fb_videomode_to_omap_timings(&specs->modedb[best_idx], timings);
+       fb_videomode_to_omap_timings(&specs->modedb[best_idx], display,
+               timings);
 
        r = 0;