regulator: TPS65910: Fix VDD1/2 voltage selector count
authorAfzal Mohammed <afzal@ti.com>
Tue, 8 Nov 2011 13:24:10 +0000 (18:54 +0530)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Wed, 23 Nov 2011 14:03:52 +0000 (14:03 +0000)
Count of selector voltage is required for regulator_set_voltage
to work via set_voltage_sel. VDD1/2 currently have it as zero,
so regulator_set_voltage won't work for VDD1/2.
Update count (n_voltages) for VDD1/2.

Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain

With above expr, number of voltages that can be selected is
step value count * gain count

constant for gain count will be called VDD1_2_NUM_VOLT_COARSE

existing constant for step value count is VDD1_2_NUM_VOLTS,
use VDD1_2_NUM_VOLT_FINE instead to make clear that step value
is not the only component in deciding selectable voltage count

Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
drivers/regulator/tps65910-regulator.c
include/linux/mfd/tps65910.h

index 66d2d60b436a3e7a28092d64a499fd203db764a5..b552aae55b417c7cd9aa97fba33bd61ad0b7e787 100644 (file)
@@ -664,10 +664,10 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev,
 
        switch (id) {
        case TPS65910_REG_VDD1:
-               dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1;
+               dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1;
                if (dcdc_mult == 1)
                        dcdc_mult--;
-               vsel = (selector % VDD1_2_NUM_VOLTS) + 3;
+               vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3;
 
                tps65910_modify_bits(pmic, TPS65910_VDD1,
                                (dcdc_mult << VDD1_VGAIN_SEL_SHIFT),
@@ -675,10 +675,10 @@ static int tps65910_set_voltage_dcdc(struct regulator_dev *dev,
                tps65910_reg_write(pmic, TPS65910_VDD1_OP, vsel);
                break;
        case TPS65910_REG_VDD2:
-               dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1;
+               dcdc_mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1;
                if (dcdc_mult == 1)
                        dcdc_mult--;
-               vsel = (selector % VDD1_2_NUM_VOLTS) + 3;
+               vsel = (selector % VDD1_2_NUM_VOLT_FINE) + 3;
 
                tps65910_modify_bits(pmic, TPS65910_VDD2,
                                (dcdc_mult << VDD2_VGAIN_SEL_SHIFT),
@@ -756,9 +756,9 @@ static int tps65910_list_voltage_dcdc(struct regulator_dev *dev,
        switch (id) {
        case TPS65910_REG_VDD1:
        case TPS65910_REG_VDD2:
-               mult = (selector / VDD1_2_NUM_VOLTS) + 1;
+               mult = (selector / VDD1_2_NUM_VOLT_FINE) + 1;
                volt = VDD1_2_MIN_VOLT +
-                               (selector % VDD1_2_NUM_VOLTS) * VDD1_2_OFFSET;
+                               (selector % VDD1_2_NUM_VOLT_FINE) * VDD1_2_OFFSET;
                break;
        case TPS65911_REG_VDDCTRL:
                volt = VDDCTRL_MIN_VOLT + (selector * VDDCTRL_OFFSET);
@@ -947,6 +947,8 @@ static __devinit int tps65910_probe(struct platform_device *pdev)
 
                if (i == TPS65910_REG_VDD1 || i == TPS65910_REG_VDD2) {
                        pmic->desc[i].ops = &tps65910_ops_dcdc;
+                       pmic->desc[i].n_voltages = VDD1_2_NUM_VOLT_FINE *
+                                                       VDD1_2_NUM_VOLT_COARSE;
                } else if (i == TPS65910_REG_VDD3) {
                        if (tps65910_chip_id(tps65910) == TPS65910)
                                pmic->desc[i].ops = &tps65910_ops_vdd3;
index 82b4c8801a4fc673fc4c7c0451bdb11330c821c7..8bf2cb9502dd7ba492680d371279577392c6d3fe 100644 (file)
 
 
 /*Registers VDD1, VDD2 voltage values definitions */
-#define VDD1_2_NUM_VOLTS                               73
+#define VDD1_2_NUM_VOLT_FINE                           73
+#define VDD1_2_NUM_VOLT_COARSE                         3
 #define VDD1_2_MIN_VOLT                                        6000
 #define VDD1_2_OFFSET                                  125