drm/i915/pch: Use minimal number of FDI lanes (v2)
authorAdam Jackson <ajax@redhat.com>
Mon, 12 Apr 2010 15:38:44 +0000 (11:38 -0400)
committerEric Anholt <eric@anholt.net>
Sun, 18 Apr 2010 23:57:44 +0000 (16:57 -0700)
This should be a small power savings. Tested on Lenovo T410 (Ironlake), LVDS
VGA and DisplayPort, up to 1920x1200R.

v2: Add Sandybridge support, fix obvious math error.

Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h

index 9fdea06f3e7340124d1e307e4db48e7ffda1ad4f..58668c407f616cf952448a53bd694dfe9d306491 100644 (file)
@@ -1507,7 +1507,8 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc)
        /* enable CPU FDI TX and PCH FDI RX */
        temp = I915_READ(fdi_tx_reg);
        temp |= FDI_TX_ENABLE;
-       temp |= FDI_DP_PORT_WIDTH_X4; /* default */
+       temp &= ~(7 << 19);
+       temp |= (intel_crtc->fdi_lanes - 1) << 19;
        temp &= ~FDI_LINK_TRAIN_NONE;
        temp |= FDI_LINK_TRAIN_PATTERN_1;
        I915_WRITE(fdi_tx_reg, temp);
@@ -1607,7 +1608,8 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc)
        /* enable CPU FDI TX and PCH FDI RX */
        temp = I915_READ(fdi_tx_reg);
        temp |= FDI_TX_ENABLE;
-       temp |= FDI_DP_PORT_WIDTH_X4; /* default */
+       temp &= ~(7 << 19);
+       temp |= (intel_crtc->fdi_lanes - 1) << 19;
        temp &= ~FDI_LINK_TRAIN_NONE;
        temp |= FDI_LINK_TRAIN_PATTERN_1;
        temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
@@ -1769,8 +1771,9 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
                         */
                        temp &= ~(0x7 << 16);
                        temp |= (pipe_bpc << 11);
-                       I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
-                                       FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
+                       temp &= ~(7 << 19);
+                       temp |= (intel_crtc->fdi_lanes - 1) << 19;
+                       I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE);
                        I915_READ(fdi_rx_reg);
                        udelay(200);
 
@@ -3368,7 +3371,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
        /* FDI link */
        if (HAS_PCH_SPLIT(dev)) {
-               int lane, link_bw, bpp;
+               int lane = 0, link_bw, bpp;
                /* eDP doesn't require FDI link, so just set DP M/N
                   according to current link config */
                if (is_edp) {
@@ -3382,7 +3385,6 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
                                target_clock = mode->clock;
                        else
                                target_clock = adjusted_mode->clock;
-                       lane = 4;
                        link_bw = 270000;
                }
 
@@ -3434,6 +3436,18 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
                        bpp = 24;
                }
 
+               if (!lane) {
+                       /* 
+                        * Account for spread spectrum to avoid
+                        * oversubscribing the link. Max center spread
+                        * is 2.5%; use 5% for safety's sake.
+                        */
+                       u32 bps = target_clock * bpp * 21 / 20;
+                       lane = bps / (link_bw * 8) + 1;
+               }
+
+               intel_crtc->fdi_lanes = lane;
+
                ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
        }
 
index 8a64c154b42c89f3f662ff962f39e8782d31cebc..1ee4717f431f459588b0216810eabb0acc7acb4d 100644 (file)
@@ -152,6 +152,7 @@ struct intel_crtc {
        bool lowfreq_avail;
        struct intel_overlay *overlay;
        struct intel_unpin_work *unpin_work;
+       int fdi_lanes;
 };
 
 #define to_intel_crtc(x) container_of(x, struct intel_crtc, base)