iwlwifi: mvm: add TDLS channel switch FW APIs

Add a channel-switch command and a switch-start notification. Also add a
FW TLV bit indicating TDLS channel switching support.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h
index 78d3e5f5fff9fd13275c2d226cffe59741ebeaaf..a94d244459d7c0cfd21c16ca675167dc2944b00c 100644 (file)
--- a/drivers/net/wireless/iwlwifi/iwl-fw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw.h
@@ -157,6 +157,7 @@ enum iwl_ucode_tlv_api {
  * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
  * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
  *     which also implies support for the scheduler configuration command
+ * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
  */
 enum iwl_ucode_tlv_capa {
        IWL_UCODE_TLV_CAPA_D0I3_SUPPORT                 = BIT(0),
@@ -167,6 +168,7 @@ enum iwl_ucode_tlv_capa {
        IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT       = BIT(10),
        IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT         = BIT(11),
        IWL_UCODE_TLV_CAPA_DQA_SUPPORT                  = BIT(12),
+       IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH          = BIT(13),
 };
 
 /* The default calibrate table size if not specified by firmware file */

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 1a67788e55f5da8a09a6aa4210ef80bb11659e0a..a71fad2ed5d6e4f4ccd7ade5133d3d2da8ef904d 100644 (file)
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -128,6 +128,10 @@ enum {
        /* global key */
        WEP_KEY = 0x20,
 
+       /* TDLS */
+       TDLS_CHANNEL_SWITCH_CMD = 0x27,
+       TDLS_CHANNEL_SWITCH_NOTIFICATION = 0xaa,
+
        /* MAC and Binding commands */
        MAC_CONTEXT_CMD = 0x28,
        TIME_EVENT_CMD = 0x29, /* both CMD and response */
@@ -1717,4 +1721,83 @@ struct iwl_scd_txq_cfg_cmd {
        u8 flags;
 } __packed;
 
+/***********************************
+ * TDLS API
+ ***********************************/
+
+/* Type of TDLS request */
+enum iwl_tdls_channel_switch_type {
+       TDLS_SEND_CHAN_SW_REQ = 0,
+       TDLS_SEND_CHAN_SW_RESP_AND_MOVE_CH,
+       TDLS_MOVE_CH,
+}; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */
+
+/**
+ * Switch timing sub-element in a TDLS channel-switch command
+ * @frame_timestamp: GP2 timestamp of channel-switch request/response packet
+ *     received from peer
+ * @max_offchan_duration: What amount of microseconds out of a DTIM is given
+ *     to the TDLS off-channel communication. For instance if the DTIM is
+ *     200TU and the TDLS peer is to be given 25% of the time, the value
+ *     given will be 50TU, or 50 * 1024 if translated into microseconds.
+ * @switch_time: switch time the peer sent in its channel switch timing IE
+ * @switch_timout: switch timeout the peer sent in its channel switch timing IE
+ */
+struct iwl_tdls_channel_switch_timing {
+       __le32 frame_timestamp; /* GP2 time of peer packet Rx */
+       __le32 max_offchan_duration; /* given in micro-seconds */
+       __le32 switch_time; /* given in micro-seconds */
+       __le32 switch_timeout; /* given in micro-seconds */
+} __packed; /* TDLS_STA_CHANNEL_SWITCH_TIMING_DATA_API_S_VER_1 */
+
+#define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200
+
+/**
+ * TDLS channel switch frame template
+ *
+ * A template representing a TDLS channel-switch request or response frame
+ *
+ * @switch_time_offset: offset to the channel switch timing IE in the template
+ * @tx_cmd: Tx parameters for the frame
+ * @data: frame data
+ */
+struct iwl_tdls_channel_switch_frame {
+       __le32 switch_time_offset;
+       struct iwl_tx_cmd tx_cmd;
+       u8 data[IWL_TDLS_CH_SW_FRAME_MAX_SIZE];
+} __packed; /* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */
+
+/**
+ * TDLS channel switch command
+ *
+ * The command is sent to initiate a channel switch and also in response to
+ * incoming TDLS channel-switch request/response packets from remote peers.
+ *
+ * @switch_type: see &enum iwl_tdls_channel_switch_type
+ * @peer_sta_id: station id of TDLS peer
+ * @ci: channel we switch to
+ * @timing: timing related data for command
+ * @frame: channel-switch request/response template, depending to switch_type
+ */
+struct iwl_tdls_channel_switch_cmd {
+       u8 switch_type;
+       __le32 peer_sta_id;
+       struct iwl_fw_channel_info ci;
+       struct iwl_tdls_channel_switch_timing timing;
+       struct iwl_tdls_channel_switch_frame frame;
+} __packed; /* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */
+
+/**
+ * TDLS channel switch start notification
+ *
+ * @status: non-zero on success
+ * @offchannel_duration: duration given in microseconds
+ * @sta_id: peer currently performing the channel-switch with
+ */
+struct iwl_tdls_channel_switch_notif {
+       __le32 status;
+       __le32 offchannel_duration;
+       __le32 sta_id;
+} __packed; /* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */
+
 #endif /* __fw_api_h__ */

diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index b022fc097e781041ccb2ac5faa9d661da909ef8c..8ee7362de2897d7b07765ec0dc98069037e143ee 100644 (file)
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -352,6 +352,8 @@ static const char *const iwl_mvm_cmd_strings[REPLY_MAX] = {
        CMD(SCAN_REQ_UMAC),
        CMD(SCAN_ABORT_UMAC),
        CMD(SCAN_COMPLETE_UMAC),
+       CMD(TDLS_CHANNEL_SWITCH_CMD),
+       CMD(TDLS_CHANNEL_SWITCH_NOTIFICATION),
 };
 #undef CMD