regulator: add device tree support for max8997
authorThomas Abraham <thomas.abraham@linaro.org>
Tue, 27 Nov 2012 08:34:32 +0000 (14:04 +0530)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Tue, 27 Nov 2012 20:05:36 +0000 (20:05 +0000)
Add device tree based discovery support for max8997.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Documentation/devicetree/bindings/regulator/max8997-regulator.txt [new file with mode: 0644]
drivers/mfd/max8997.c
drivers/regulator/max8997.c
include/linux/mfd/max8997-private.h
include/linux/mfd/max8997.h

diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
new file mode 100644 (file)
index 0000000..9fd69a1
--- /dev/null
@@ -0,0 +1,146 @@
+* Maxim MAX8997 Voltage and Current Regulator
+
+The Maxim MAX8997 is a multi-function device which includes volatage and
+current regulators, rtc, charger controller and other sub-blocks. It is
+interfaced to the host controller using a i2c interface. Each sub-block is
+addressed by the host system using different i2c slave address. This document
+describes the bindings for 'pmic' sub-block of max8997.
+
+Required properties:
+- compatible: Should be "maxim,max8997-pmic".
+- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
+
+- max8997,pmic-buck1-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+  units for buck1 when changing voltage using gpio dvs. Refer to [1] below
+  for additional information.
+
+- max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+  units for buck2 when changing voltage using gpio dvs. Refer to [1] below
+  for additional information.
+
+- max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+  units for buck5 when changing voltage using gpio dvs. Refer to [1] below
+  for additional information.
+
+[1] If none of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
+    property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage'
+    property should specify atleast one voltage level (which would be a
+    safe operating voltage).
+
+    If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
+    property is specified, then all the eigth voltage values for the
+    'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the interrupts from max8997 are delivered to.
+- interrupts: Interrupt specifiers for two interrupt sources.
+  - First interrupt specifier is for 'irq1' interrupt.
+  - Second interrupt specifier is for 'alert' interrupt.
+- max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs.
+- max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
+- max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs.
+
+Additional properties required if either of the optional properties are used:
+- max8997,pmic-ignore-gpiodvs-side-effect: When GPIO-DVS mode is used for
+  multiple bucks, changing the voltage value of one of the bucks may affect
+  that of another buck, which is the side effect of the change (set_voltage).
+  Use this property to ignore such side effects and change the voltage.
+
+- max8997,pmic-buck125-default-dvs-idx: Default voltage setting selected from
+  the possible 8 options selectable by the dvs gpios. The value of this
+  property should be between 0 and 7. If not specified or if out of range, the
+  default value of this property is set to 0.
+
+- max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used
+  for dvs. The format of the gpio specifier depends in the gpio controller.
+
+Regulators: The regulators of max8997 that have to be instantiated should be
+included in a sub-node named 'regulators'. Regulator nodes included in this
+sub-node should be of the format as listed below.
+
+       regulator_name {
+               standard regulator bindings here
+       };
+
+The following are the names of the regulators that the max8997 pmic block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of max8997.
+
+       - LDOn
+                 - valid values for n are 1 to 18 and 21
+                 - Example: LDO0, LD01, LDO2, LDO21
+       - BUCKn
+                 - valid values for n are 1 to 7.
+                 - Example: BUCK1, BUCK2, BUCK3, BUCK7
+
+       - ENVICHG: Battery Charging Current Monitor Output. This is a fixed
+                  voltage type regulator
+
+       - ESAFEOUT1: (ldo19)
+       - ESAFEOUT2: (ld020)
+
+       - CHARGER_CV: main battery charger voltage control
+       - CHARGER: main battery charger current control
+       - CHARGER_TOPOFF: end of charge current threshold level
+
+The bindings inside the regulator nodes use the standard regulator bindings
+which are documented elsewhere.
+
+Example:
+
+       max8997_pmic@66 {
+               compatible = "maxim,max8997-pmic";
+               interrupt-parent = <&wakeup_eint>;
+               reg = <0x66>;
+               interrupts = <4 0>, <3 0>;
+
+               max8997,pmic-buck1-uses-gpio-dvs;
+               max8997,pmic-buck2-uses-gpio-dvs;
+               max8997,pmic-buck5-uses-gpio-dvs;
+
+               max8997,pmic-ignore-gpiodvs-side-effect;
+               max8997,pmic-buck125-default-dvs-idx = <0>;
+
+               max8997,pmic-buck125-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
+                                                <&gpx0 1 1 0 0>, /* SET2 */
+                                                <&gpx0 2 1 0 0>; /* SET3 */
+
+               max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+                                                <1250000>, <1200000>,
+                                                <1150000>, <1100000>,
+                                                <1000000>, <950000>;
+
+               max8997,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
+                                                <1100000>, <1100000>,
+                                                <1000000>, <1000000>,
+                                                <1000000>, <1000000>;
+
+               max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+                                                <1200000>, <1200000>,
+                                                <1200000>, <1200000>,
+                                                <1200000>, <1200000>;
+
+               regulators {
+                       ldo1_reg: LDO1 {
+                               regulator-name = "VDD_ABB_3.3V";
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       ldo2_reg: LDO2 {
+                               regulator-name = "VDD_ALIVE_1.1V";
+                               regulator-min-microvolt = <1100000>;
+                               regulator-max-microvolt = <1100000>;
+                               regulator-always-on;
+                       };
+
+                       buck1_reg: BUCK1 {
+                               regulator-name = "VDD_ARM_1.2V";
+                               regulator-min-microvolt = <950000>;
+                               regulator-max-microvolt = <1350000>;
+                               regulator-always-on;
+                               regulator-boot-on;
+                       };
+               };
+       };
index f123517065ec911ff6e4154aa25a3f8e1dd0bd98..abd5c80c7cf5f59c9a3adf78d188482148ecf512 100644 (file)
  * This driver is based on max8998.c
  */
 
+#include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
+#include <linux/of_irq.h>
 #include <linux/interrupt.h>
 #include <linux/pm_runtime.h>
 #include <linux/module.h>
@@ -47,6 +49,13 @@ static struct mfd_cell max8997_devs[] = {
        { .name = "max8997-led", .id = 2 },
 };
 
+#ifdef CONFIG_OF
+static struct of_device_id __devinitdata max8997_pmic_dt_match[] = {
+       { .compatible = "maxim,max8997-pmic", .data = TYPE_MAX8997 },
+       {},
+};
+#endif
+
 int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest)
 {
        struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
@@ -123,6 +132,58 @@ int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
 }
 EXPORT_SYMBOL_GPL(max8997_update_reg);
 
+#ifdef CONFIG_OF
+/*
+ * Only the common platform data elements for max8997 are parsed here from the
+ * device tree. Other sub-modules of max8997 such as pmic, rtc and others have
+ * to parse their own platform data elements from device tree.
+ *
+ * The max8997 platform data structure is instantiated here and the drivers for
+ * the sub-modules need not instantiate another instance while parsing their
+ * platform data.
+ */
+static struct max8997_platform_data *max8997_i2c_parse_dt_pdata(
+                                       struct device *dev)
+{
+       struct max8997_platform_data *pd;
+
+       pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+       if (!pd) {
+               dev_err(dev, "could not allocate memory for pdata\n");
+               return ERR_PTR(-ENOMEM);
+       }
+
+       pd->ono = irq_of_parse_and_map(dev->of_node, 1);
+
+       /*
+        * ToDo: the 'wakeup' member in the platform data is more of a linux
+        * specfic information. Hence, there is no binding for that yet and
+        * not parsed here.
+        */
+
+       return pd;
+}
+#else
+static struct max8997_platform_data *max8997_i2c_parse_dt_pdata(
+                                       struct device *dev)
+{
+       return 0;
+}
+#endif
+
+static inline int max8997_i2c_get_driver_data(struct i2c_client *i2c,
+                                               const struct i2c_device_id *id)
+{
+#ifdef CONFIG_OF
+       if (i2c->dev.of_node) {
+               const struct of_device_id *match;
+               match = of_match_node(max8997_pmic_dt_match, i2c->dev.of_node);
+               return (int)match->data;
+       }
+#endif
+       return (int)id->driver_data;
+}
+
 static int max8997_i2c_probe(struct i2c_client *i2c,
                            const struct i2c_device_id *id)
 {
@@ -137,12 +198,21 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
        i2c_set_clientdata(i2c, max8997);
        max8997->dev = &i2c->dev;
        max8997->i2c = i2c;
-       max8997->type = id->driver_data;
+       max8997->type = max8997_i2c_get_driver_data(i2c, id);
        max8997->irq = i2c->irq;
 
+       if (max8997->dev->of_node) {
+               pdata = max8997_i2c_parse_dt_pdata(max8997->dev);
+               if (IS_ERR(pdata)) {
+                       ret = PTR_ERR(pdata);
+                       goto err;
+               }
+       }
+
        if (!pdata)
                goto err;
 
+       max8997->pdata = pdata;
        max8997->ono = pdata->ono;
 
        mutex_init(&max8997->iolock);
@@ -434,6 +504,7 @@ static struct i2c_driver max8997_i2c_driver = {
                   .name = "max8997",
                   .owner = THIS_MODULE,
                   .pm = &max8997_pm,
+                  .of_match_table = of_match_ptr(max8997_pmic_dt_match),
        },
        .probe = max8997_i2c_probe,
        .remove = max8997_i2c_remove,
index 64cf2ee38f6c1ac0e6d9800881a93834cf763180..b56c4326853d0e731029718b812131dd69bfa775 100644 (file)
@@ -24,6 +24,7 @@
 #include <linux/bug.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -31,6 +32,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/mfd/max8997.h>
 #include <linux/mfd/max8997-private.h>
+#include <linux/regulator/of_regulator.h>
 
 struct max8997_data {
        struct device *dev;
@@ -933,10 +935,145 @@ static struct regulator_desc regulators[] = {
                                  max8997_charger_fixedstate_ops),
 };
 
+#ifdef CONFIG_OF
+static int max8997_pmic_dt_parse_dvs_gpio(struct max8997_dev *iodev,
+                       struct max8997_platform_data *pdata,
+                       struct device_node *pmic_np)
+{
+       int i, gpio;
+
+       for (i = 0; i < 3; i++) {
+               gpio = of_get_named_gpio(pmic_np,
+                                       "max8997,pmic-buck125-dvs-gpios", i);
+               if (!gpio_is_valid(gpio)) {
+                       dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
+                       return -EINVAL;
+               }
+               pdata->buck125_gpios[i] = gpio;
+       }
+       return 0;
+}
+
+static int max8997_pmic_dt_parse_pdata(struct max8997_dev *iodev,
+                                       struct max8997_platform_data *pdata)
+{
+       struct device_node *pmic_np, *regulators_np, *reg_np;
+       struct max8997_regulator_data *rdata;
+       unsigned int i, dvs_voltage_nr = 1, ret;
+
+       pmic_np = iodev->dev->of_node;
+       if (!pmic_np) {
+               dev_err(iodev->dev, "could not find pmic sub-node\n");
+               return -ENODEV;
+       }
+
+       regulators_np = of_find_node_by_name(pmic_np, "regulators");
+       if (!regulators_np) {
+               dev_err(iodev->dev, "could not find regulators sub-node\n");
+               return -EINVAL;
+       }
+
+       /* count the number of regulators to be supported in pmic */
+       pdata->num_regulators = 0;
+       for_each_child_of_node(regulators_np, reg_np)
+               pdata->num_regulators++;
+
+       rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) *
+                               pdata->num_regulators, GFP_KERNEL);
+       if (!rdata) {
+               dev_err(iodev->dev, "could not allocate memory for "
+                                               "regulator data\n");
+               return -ENOMEM;
+       }
+
+       pdata->regulators = rdata;
+       for_each_child_of_node(regulators_np, reg_np) {
+               for (i = 0; i < ARRAY_SIZE(regulators); i++)
+                       if (!of_node_cmp(reg_np->name, regulators[i].name))
+                               break;
+
+               if (i == ARRAY_SIZE(regulators)) {
+                       dev_warn(iodev->dev, "don't know how to configure "
+                               "regulator %s\n", reg_np->name);
+                       continue;
+               }
+
+               rdata->id = i;
+               rdata->initdata = of_get_regulator_init_data(
+                                               iodev->dev, reg_np);
+               rdata->reg_node = reg_np;
+               rdata++;
+       }
+
+       if (of_get_property(pmic_np, "max8997,pmic-buck1-uses-gpio-dvs", NULL))
+               pdata->buck1_gpiodvs = true;
+
+       if (of_get_property(pmic_np, "max8997,pmic-buck2-uses-gpio-dvs", NULL))
+               pdata->buck2_gpiodvs = true;
+
+       if (of_get_property(pmic_np, "max8997,pmic-buck5-uses-gpio-dvs", NULL))
+               pdata->buck5_gpiodvs = true;
+
+       if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
+                                               pdata->buck5_gpiodvs) {
+               ret = max8997_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
+               if (ret)
+                       return -EINVAL;
+
+               if (of_property_read_u32(pmic_np,
+                               "max8997,pmic-buck125-default-dvs-idx",
+                               &pdata->buck125_default_idx)) {
+                       pdata->buck125_default_idx = 0;
+               } else {
+                       if (pdata->buck125_default_idx >= 8) {
+                               pdata->buck125_default_idx = 0;
+                               dev_info(iodev->dev, "invalid value for "
+                               "default dvs index, using 0 instead\n");
+                       }
+               }
+
+               if (of_get_property(pmic_np,
+                       "max8997,pmic-ignore-gpiodvs-side-effect", NULL))
+                       pdata->ignore_gpiodvs_side_effect = true;
+
+               dvs_voltage_nr = 8;
+       }
+
+       if (of_property_read_u32_array(pmic_np,
+                               "max8997,pmic-buck1-dvs-voltage",
+                               pdata->buck1_voltage, dvs_voltage_nr)) {
+               dev_err(iodev->dev, "buck1 voltages not specified\n");
+               return -EINVAL;
+       }
+
+       if (of_property_read_u32_array(pmic_np,
+                               "max8997,pmic-buck2-dvs-voltage",
+                               pdata->buck2_voltage, dvs_voltage_nr)) {
+               dev_err(iodev->dev, "buck2 voltages not specified\n");
+               return -EINVAL;
+       }
+
+       if (of_property_read_u32_array(pmic_np,
+                               "max8997,pmic-buck5-dvs-voltage",
+                               pdata->buck5_voltage, dvs_voltage_nr)) {
+               dev_err(iodev->dev, "buck5 voltages not specified\n");
+               return -EINVAL;
+       }
+
+       return 0;
+}
+#else
+static int max8997_pmic_dt_parse_pdata(struct max8997_dev *iodev,
+                                       struct max8997_platform_data *pdata)
+{
+       return 0;
+}
+#endif /* CONFIG_OF */
+
 static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 {
        struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-       struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
+       struct max8997_platform_data *pdata = iodev->pdata;
        struct regulator_config config = { };
        struct regulator_dev **rdev;
        struct max8997_data *max8997;
@@ -944,11 +1081,17 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
        int i, ret, size, nr_dvs;
        u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0;
 
-       if (!pdata) {
+       if (IS_ERR_OR_NULL(pdata)) {
                dev_err(pdev->dev.parent, "No platform init data supplied.\n");
                return -ENODEV;
        }
 
+       if (iodev->dev->of_node) {
+               ret = max8997_pmic_dt_parse_pdata(iodev, pdata);
+               if (ret)
+                       return ret;
+       }
+
        max8997 = devm_kzalloc(&pdev->dev, sizeof(struct max8997_data),
                               GFP_KERNEL);
        if (!max8997)
@@ -1104,6 +1247,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
                config.dev = max8997->dev;
                config.init_data = pdata->regulators[i].initdata;
                config.driver_data = max8997;
+               config.of_node = pdata->regulators[i].reg_node;
 
                rdev[i] = regulator_register(&regulators[id], &config);
                if (IS_ERR(rdev[i])) {
index 830152cfae339727ad1d70875a61dbdaa34a6c67..6ae21bf47d644fe8424587b31afd880701720434 100644 (file)
@@ -316,6 +316,7 @@ enum max8997_irq {
 #define MAX8997_NUM_GPIO       12
 struct max8997_dev {
        struct device *dev;
+       struct max8997_platform_data *pdata;
        struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */
        struct i2c_client *rtc; /* slave addr 0x0c */
        struct i2c_client *haptic; /* slave addr 0x90 */
index 328d8e24b533acaf524746d01dbf1cba76656782..1d4a4fe6ac33e9341f8b90bb0a0f32a015b490b5 100644 (file)
@@ -75,6 +75,7 @@ enum max8998_regulators {
 struct max8997_regulator_data {
        int id;
        struct regulator_init_data *initdata;
+       struct device_node *reg_node;
 };
 
 enum max8997_muic_usb_type {