e1000e: add custom set_d[0|3]_lplu_state function pointer for 82574
authorBruce Allan <bruce.w.allan@intel.com>
Thu, 6 Jan 2011 14:29:53 +0000 (14:29 +0000)
committerDavid S. Miller <davem@davemloft.net>
Mon, 10 Jan 2011 07:44:09 +0000 (23:44 -0800)
82574 needs to configure Low Power Link Up (or LPLU) differently than
the other parts in the 8257x family supported by the driver.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/e1000e/82571.c
drivers/net/e1000e/hw.h

index 11a273e4ba2393e7ec4e0c871e4a243f306f51f1..cb6c7b1c1fb85595cf908415c403fcdd10f97238 100644 (file)
@@ -78,6 +78,8 @@ static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
 static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);
 static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);
 static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);
+static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active);
+static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active);
 
 /**
  *  e1000_init_phy_params_82571 - Init PHY func ptrs.
@@ -113,6 +115,8 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
                phy->type                = e1000_phy_bm;
                phy->ops.acquire = e1000_get_hw_semaphore_82574;
                phy->ops.release = e1000_put_hw_semaphore_82574;
+               phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574;
+               phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574;
                break;
        default:
                return -E1000_ERR_PHY;
@@ -655,6 +659,58 @@ static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
        mutex_unlock(&swflag_mutex);
 }
 
+/**
+ *  e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state
+ *  @hw: pointer to the HW structure
+ *  @active: true to enable LPLU, false to disable
+ *
+ *  Sets the LPLU D0 state according to the active flag.
+ *  LPLU will not be activated unless the
+ *  device autonegotiation advertisement meets standards of
+ *  either 10 or 10/100 or 10/100/1000 at all duplexes.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active)
+{
+       u16 data = er32(POEMB);
+
+       if (active)
+               data |= E1000_PHY_CTRL_D0A_LPLU;
+       else
+               data &= ~E1000_PHY_CTRL_D0A_LPLU;
+
+       ew32(POEMB, data);
+       return 0;
+}
+
+/**
+ *  e1000_set_d3_lplu_state_82574 - Sets low power link up state for D3
+ *  @hw: pointer to the HW structure
+ *  @active: boolean used to enable/disable lplu
+ *
+ *  The low power link up (lplu) state is set to the power management level D3
+ *  when active is true, else clear lplu for D3. LPLU
+ *  is used during Dx states where the power conservation is most important.
+ *  During driver activity, SmartSpeed should be enabled so performance is
+ *  maintained.
+ **/
+static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active)
+{
+       u16 data = er32(POEMB);
+
+       if (!active) {
+               data &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+       } else if ((hw->phy.autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+                  (hw->phy.autoneg_advertised == E1000_ALL_NOT_GIG) ||
+                  (hw->phy.autoneg_advertised == E1000_ALL_10_SPEED)) {
+               data |= E1000_PHY_CTRL_NOND0A_LPLU;
+       }
+
+       ew32(POEMB, data);
+       return 0;
+}
+
 /**
  *  e1000_acquire_nvm_82571 - Request for access to the EEPROM
  *  @hw: pointer to the HW structure
index ba302a5c2c30e14c2be16333f38adb2a2668a89c..e774380c7cecc6d645d543d253cbe05027646b39 100644 (file)
@@ -83,6 +83,7 @@ enum e1e_registers {
        E1000_EXTCNF_CTRL  = 0x00F00, /* Extended Configuration Control */
        E1000_EXTCNF_SIZE  = 0x00F08, /* Extended Configuration Size */
        E1000_PHY_CTRL     = 0x00F10, /* PHY Control Register in CSR */
+#define E1000_POEMB    E1000_PHY_CTRL  /* PHY OEM Bits */
        E1000_PBA      = 0x01000, /* Packet Buffer Allocation - RW */
        E1000_PBS      = 0x01008, /* Packet Buffer Size */
        E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */