u8 addr[ETH_ALEN];
};
+/**
+ * struct cfg80211_acl_data - Access control list data
+ *
+ * @acl_policy: ACL policy to be applied on the station's
+ entry specified by mac_addr
+ * @n_acl_entries: Number of MAC address entries passed
+ * @mac_addrs: List of MAC addresses of stations to be used for ACL
+ */
+struct cfg80211_acl_data {
+ enum nl80211_acl_policy acl_policy;
+ int n_acl_entries;
+
+ /* Keep it last */
+ struct mac_address mac_addrs[];
+};
+
/**
* struct cfg80211_ap_settings - AP configuration
*
* @inactivity_timeout: time in seconds to determine station's inactivity.
* @p2p_ctwindow: P2P CT Window
* @p2p_opp_ps: P2P opportunistic PS
+ * @acl: ACL configuration used by the drivers which has support for
+ * MAC address based access control
*/
struct cfg80211_ap_settings {
struct cfg80211_chan_def chandef;
int inactivity_timeout;
u8 p2p_ctwindow;
bool p2p_opp_ps;
+ const struct cfg80211_acl_data *acl;
};
/**
*
* @start_p2p_device: Start the given P2P device.
* @stop_p2p_device: Stop the given P2P device.
+ *
+ * @set_mac_acl: Sets MAC address control list in AP and P2P GO mode.
+ * Parameters include ACL policy, an array of MAC address of stations
+ * and the number of MAC addresses. If there is already a list in driver
+ * this new list replaces the existing one. Driver has to clear its ACL
+ * when number of MAC addresses entries is passed as 0. Drivers which
+ * advertise the support for MAC based ACL have to implement this callback.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
struct wireless_dev *wdev);
void (*stop_p2p_device)(struct wiphy *wiphy,
struct wireless_dev *wdev);
+
+ int (*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev,
+ const struct cfg80211_acl_data *params);
};
/*
* @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
* @ht_capa_mod_mask: Specify what ht_cap values can be over-ridden.
* If null, then none can be over-ridden.
+ *
+ * @max_acl_mac_addrs: Maximum number of MAC addresses that the device
+ * supports for ACL.
*/
struct wiphy {
/* assign these fields before you register the wiphy */
/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
u16 interface_modes;
+ u16 max_acl_mac_addrs;
+
u32 flags, features;
u32 ap_sme_capa;
* %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
* %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
* %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
- * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
+ * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
+ * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
* The channel to use can be set on the interface or be given using the
* %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
* @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
* @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
* for IBSS or MESH vif.
*
+ * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.
+ * This is to be used with the drivers advertising the support of MAC
+ * address based access control. List of MAC addresses is passed in
+ * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in
+ * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it
+ * is not already done. The new list will replace any existing list. Driver
+ * will clear its ACL when the list of MAC addresses passed is empty. This
+ * command is used in AP/P2P GO mode. Driver has to make sure to clear its
+ * ACL list during %NL80211_CMD_STOP_AP.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
NL80211_CMD_SET_MCAST_RATE,
+ NL80211_CMD_SET_MAC_ACL,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
* @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
* defined in &enum nl80211_mesh_power_mode.
*
+ * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,
+ * carried in a u32 attribute
+ *
+ * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for
+ * MAC ACL.
+ *
+ * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
+ * number of MAC addresses that a device can support for MAC
+ * ACL.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
NL80211_ATTR_LOCAL_MESH_POWER_MODE,
+ NL80211_ATTR_ACL_POLICY,
+
+ NL80211_ATTR_MAC_ADDRS,
+
+ NL80211_ATTR_MAC_ACL_MAX,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
* enum nl80211_connect_failed_reason - connection request failed reasons
* @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
* handled by the AP is reached.
- * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist.
+ * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL.
*/
enum nl80211_connect_failed_reason {
NL80211_CONN_FAIL_MAX_CLIENTS,
NL80211_SCAN_FLAG_AP = 1<<2,
};
+/**
+ * enum nl80211_acl_policy - access control policy
+ *
+ * Access control policy is applied on a MAC list set by
+ * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to
+ * be used with %NL80211_ATTR_ACL_POLICY.
+ *
+ * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are
+ * listed in ACL, i.e. allow all the stations which are not listed
+ * in ACL to authenticate.
+ * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed
+ * in ACL, i.e. deny all the stations which are not listed in ACL.
+ */
+enum nl80211_acl_policy {
+ NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED,
+ NL80211_ACL_POLICY_DENY_UNLESS_LISTED,
+};
+
#endif /* __LINUX_NL80211_H */
ETH_ALEN)))
return -EINVAL;
+ if (WARN_ON(wiphy->max_acl_mac_addrs &&
+ (!(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME) ||
+ !rdev->ops->set_mac_acl)))
+ return -EINVAL;
+
if (wiphy->addresses)
memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN);
[NL80211_ATTR_SCAN_FLAGS] = { .type = NLA_U32 },
[NL80211_ATTR_P2P_CTWINDOW] = { .type = NLA_U8 },
[NL80211_ATTR_P2P_OPPPS] = { .type = NLA_U8 },
+ [NL80211_ATTR_ACL_POLICY] = {. type = NLA_U32 },
+ [NL80211_ATTR_MAC_ADDRS] = { .type = NLA_NESTED },
};
/* policy for the key attributes */
dev->wiphy.ht_capa_mod_mask))
goto nla_put_failure;
+ if (dev->wiphy.flags & WIPHY_FLAG_HAVE_AP_SME &&
+ dev->wiphy.max_acl_mac_addrs &&
+ nla_put_u32(msg, NL80211_ATTR_MAC_ACL_MAX,
+ dev->wiphy.max_acl_mac_addrs))
+ goto nla_put_failure;
+
return genlmsg_end(msg, hdr);
nla_put_failure:
return err;
}
+/* This function returns an error or the number of nested attributes */
+static int validate_acl_mac_addrs(struct nlattr *nl_attr)
+{
+ struct nlattr *attr;
+ int n_entries = 0, tmp;
+
+ nla_for_each_nested(attr, nl_attr, tmp) {
+ if (nla_len(attr) != ETH_ALEN)
+ return -EINVAL;
+
+ n_entries++;
+ }
+
+ return n_entries;
+}
+
+/*
+ * This function parses ACL information and allocates memory for ACL data.
+ * On successful return, the calling function is responsible to free the
+ * ACL buffer returned by this function.
+ */
+static struct cfg80211_acl_data *parse_acl_data(struct wiphy *wiphy,
+ struct genl_info *info)
+{
+ enum nl80211_acl_policy acl_policy;
+ struct nlattr *attr;
+ struct cfg80211_acl_data *acl;
+ int i = 0, n_entries, tmp;
+
+ if (!wiphy->max_acl_mac_addrs)
+ return ERR_PTR(-EOPNOTSUPP);
+
+ if (!info->attrs[NL80211_ATTR_ACL_POLICY])
+ return ERR_PTR(-EINVAL);
+
+ acl_policy = nla_get_u32(info->attrs[NL80211_ATTR_ACL_POLICY]);
+ if (acl_policy != NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED &&
+ acl_policy != NL80211_ACL_POLICY_DENY_UNLESS_LISTED)
+ return ERR_PTR(-EINVAL);
+
+ if (!info->attrs[NL80211_ATTR_MAC_ADDRS])
+ return ERR_PTR(-EINVAL);
+
+ n_entries = validate_acl_mac_addrs(info->attrs[NL80211_ATTR_MAC_ADDRS]);
+ if (n_entries < 0)
+ return ERR_PTR(n_entries);
+
+ if (n_entries > wiphy->max_acl_mac_addrs)
+ return ERR_PTR(-ENOTSUPP);
+
+ acl = kzalloc(sizeof(*acl) + (sizeof(struct mac_address) * n_entries),
+ GFP_KERNEL);
+ if (!acl)
+ return ERR_PTR(-ENOMEM);
+
+ nla_for_each_nested(attr, info->attrs[NL80211_ATTR_MAC_ADDRS], tmp) {
+ memcpy(acl->mac_addrs[i].addr, nla_data(attr), ETH_ALEN);
+ i++;
+ }
+
+ acl->n_acl_entries = n_entries;
+ acl->acl_policy = acl_policy;
+
+ return acl;
+}
+
+static int nl80211_set_mac_acl(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ struct cfg80211_acl_data *acl;
+ int err;
+
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+ dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
+ return -EOPNOTSUPP;
+
+ if (!dev->ieee80211_ptr->beacon_interval)
+ return -EINVAL;
+
+ acl = parse_acl_data(&rdev->wiphy, info);
+ if (IS_ERR(acl))
+ return PTR_ERR(acl);
+
+ err = rdev_set_mac_acl(rdev, dev, acl);
+
+ kfree(acl);
+
+ return err;
+}
+
static int nl80211_parse_beacon(struct genl_info *info,
struct cfg80211_beacon_data *bcn)
{
if (err)
return err;
+ if (info->attrs[NL80211_ATTR_ACL_POLICY]) {
+ params.acl = parse_acl_data(&rdev->wiphy, info);
+ if (IS_ERR(params.acl))
+ return PTR_ERR(params.acl);
+ }
+
err = rdev_start_ap(rdev, dev, ¶ms);
if (!err) {
wdev->preset_chandef = params.chandef;
wdev->ssid_len = params.ssid_len;
memcpy(wdev->ssid, params.ssid, wdev->ssid_len);
}
+
+ kfree(params.acl);
+
return err;
}
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_SET_MAC_ACL,
+ .doit = nl80211_set_mac_acl,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
trace_rdev_return_void(&rdev->wiphy);
}
+
+static inline int rdev_set_mac_acl(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct cfg80211_acl_data *params)
+{
+ int ret;
+
+ trace_rdev_set_mac_acl(&rdev->wiphy, dev, params);
+ ret = rdev->ops->set_mac_acl(&rdev->wiphy, dev, params);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
#endif /* __CFG80211_RDEV_OPS */
TP_ARGS(wiphy, wdev)
);
+TRACE_EVENT(rdev_set_mac_acl,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+ struct cfg80211_acl_data *params),
+ TP_ARGS(wiphy, netdev, params),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ NETDEV_ENTRY
+ __field(u32, acl_policy)
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ WIPHY_ASSIGN;
+ __entry->acl_policy = params->acl_policy;
+ ),
+ TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", acl policy: %d",
+ WIPHY_PR_ARG, NETDEV_PR_ARG, __entry->acl_policy)
+);
+
/*************************************************************
* cfg80211 exported functions traces *
*************************************************************/