#include "generic.h"
-void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-EXPORT_SYMBOL(assign_h3600_egpio);
-
struct gpio_default_state {
int gpio;
int mode;
#ifdef CONFIG_SA1100_H3100
-#define H3100_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3100_egpio = 0;
-
-static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
-{
- unsigned int egpio = 0;
- long gpio = 0;
- unsigned long flags;
-
- switch (x) {
- case IPAQ_EGPIO_LCD_POWER:
- egpio |= EGPIO_H3600_LCD_ON;
- gpio |= GPIO_H3100_LCD_3V_ON;
- break;
- case IPAQ_EGPIO_LCD_ENABLE:
- break;
- case IPAQ_EGPIO_CODEC_NRESET:
- egpio |= EGPIO_H3600_CODEC_NRESET;
- break;
- case IPAQ_EGPIO_AUDIO_ON:
- gpio |= GPIO_H3100_AUD_PWR_ON
- | GPIO_H3100_AUD_ON;
- break;
- case IPAQ_EGPIO_QMUTE:
- gpio |= GPIO_H3100_QMUTE;
- break;
- case IPAQ_EGPIO_OPT_NVRAM_ON:
- egpio |= EGPIO_H3600_OPT_NVRAM_ON;
- break;
- case IPAQ_EGPIO_OPT_ON:
- egpio |= EGPIO_H3600_OPT_ON;
- break;
- case IPAQ_EGPIO_CARD_RESET:
- egpio |= EGPIO_H3600_CARD_RESET;
- break;
- case IPAQ_EGPIO_OPT_RESET:
- egpio |= EGPIO_H3600_OPT_RESET;
- break;
- case IPAQ_EGPIO_IR_ON:
- gpio |= GPIO_H3100_IR_ON;
- break;
- case IPAQ_EGPIO_IR_FSEL:
- gpio |= GPIO_H3100_IR_FSEL;
- break;
- case IPAQ_EGPIO_RS232_ON:
- egpio |= EGPIO_H3600_RS232_ON;
- break;
- case IPAQ_EGPIO_VPP_ON:
- egpio |= EGPIO_H3600_VPP_ON;
- break;
- }
-
- if (egpio || gpio) {
- local_irq_save(flags);
- if (setp) {
- h3100_egpio |= egpio;
- GPSR = gpio;
- } else {
- h3100_egpio &= ~egpio;
- GPCR = gpio;
- }
- H3100_EGPIO = h3100_egpio;
- local_irq_restore(flags);
- }
-}
-
#define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON \
| GPIO_H3100_GPIO3 \
| GPIO_H3100_QMUTE \
/* Older bootldrs put GPIO2-9 in alternate mode on the
assumption that they are used for video */
GAFR &= ~H3100_DIRECT_EGPIO;
-
- H3100_EGPIO = h3100_egpio;
- assign_h3600_egpio = h3100_control_egpio;
}
/*
#ifdef CONFIG_SA1100_H3600
-#define H3600_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3600_egpio = EGPIO_H3600_RS232_ON;
-
-static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
-{
- unsigned int egpio = 0;
- unsigned long flags;
-
- switch (x) {
- case IPAQ_EGPIO_LCD_POWER:
- egpio |= EGPIO_H3600_LCD_ON |
- EGPIO_H3600_LCD_PCI |
- EGPIO_H3600_LCD_5V_ON |
- EGPIO_H3600_LVDD_ON;
- break;
- case IPAQ_EGPIO_LCD_ENABLE:
- break;
- case IPAQ_EGPIO_CODEC_NRESET:
- egpio |= EGPIO_H3600_CODEC_NRESET;
- break;
- case IPAQ_EGPIO_AUDIO_ON:
- egpio |= EGPIO_H3600_AUD_AMP_ON |
- EGPIO_H3600_AUD_PWR_ON;
- break;
- case IPAQ_EGPIO_QMUTE:
- egpio |= EGPIO_H3600_QMUTE;
- break;
- case IPAQ_EGPIO_OPT_NVRAM_ON:
- egpio |= EGPIO_H3600_OPT_NVRAM_ON;
- break;
- case IPAQ_EGPIO_OPT_ON:
- egpio |= EGPIO_H3600_OPT_ON;
- break;
- case IPAQ_EGPIO_CARD_RESET:
- egpio |= EGPIO_H3600_CARD_RESET;
- break;
- case IPAQ_EGPIO_OPT_RESET:
- egpio |= EGPIO_H3600_OPT_RESET;
- break;
- case IPAQ_EGPIO_IR_ON:
- egpio |= EGPIO_H3600_IR_ON;
- break;
- case IPAQ_EGPIO_IR_FSEL:
- egpio |= EGPIO_H3600_IR_FSEL;
- break;
- case IPAQ_EGPIO_RS232_ON:
- egpio |= EGPIO_H3600_RS232_ON;
- break;
- case IPAQ_EGPIO_VPP_ON:
- egpio |= EGPIO_H3600_VPP_ON;
- break;
- }
-
- if (egpio) {
- local_irq_save(flags);
- if (setp)
- h3600_egpio |= egpio;
- else
- h3600_egpio &= ~egpio;
- H3600_EGPIO = h3600_egpio;
- local_irq_restore(flags);
- }
-}
-
/*
* helper for sa1100fb
*/
GPDR = GPIO_H3600_L3_CLOCK |
GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0;
-
- H3600_EGPIO = h3600_egpio; /* Maintains across sleep? */
- assign_h3600_egpio = h3600_control_egpio;
}
/*
#define IRQ_GPIO_H3600_OPT_IRQ IRQ_GPIO24
#define IRQ_GPIO_H3600_COM_CTS IRQ_GPIO25
-
-#ifndef __ASSEMBLY__
-
-enum ipaq_egpio_type {
- IPAQ_EGPIO_LCD_POWER, /* Power to the LCD panel */
- IPAQ_EGPIO_CODEC_NRESET, /* Clear to reset the audio codec (remember to return high) */
- IPAQ_EGPIO_AUDIO_ON, /* Audio power */
- IPAQ_EGPIO_QMUTE, /* Audio muting */
- IPAQ_EGPIO_OPT_NVRAM_ON, /* Non-volatile RAM on extension sleeves (SPI interface) */
- IPAQ_EGPIO_OPT_ON, /* Power to extension sleeves */
- IPAQ_EGPIO_CARD_RESET, /* Reset PCMCIA cards on extension sleeve (???) */
- IPAQ_EGPIO_OPT_RESET, /* Reset option pack (???) */
- IPAQ_EGPIO_IR_ON, /* IR sensor/emitter power */
- IPAQ_EGPIO_IR_FSEL, /* IR speed selection 1->fast, 0->slow */
- IPAQ_EGPIO_RS232_ON, /* Maxim RS232 chip power */
- IPAQ_EGPIO_VPP_ON, /* Turn on power to flash programming */
- IPAQ_EGPIO_LCD_ENABLE, /* Enable/disable LCD controller */
-};
-
-extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-
-#endif /* ASSEMBLY */
-
#endif /* _INCLUDE_H3600_H_ */
#define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18
#define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27
-/* H3100 / 3600 EGPIO pins */
-#define EGPIO_H3600_VPP_ON (1 << 0)
-#define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */
-#define EGPIO_H3600_OPT_RESET (1 << 2) /* reset the attached option pack. active high. */
-#define EGPIO_H3600_CODEC_NRESET (1 << 3) /* reset the onboard UDA1341. active low. */
-#define EGPIO_H3600_OPT_NVRAM_ON (1 << 4) /* apply power to optionpack nvram, active high. */
-#define EGPIO_H3600_OPT_ON (1 << 5) /* full power to option pack. active high. */
-#define EGPIO_H3600_LCD_ON (1 << 6) /* enable 3.3V to LCD. active high. */
-#define EGPIO_H3600_RS232_ON (1 << 7) /* UART3 transceiver force on. Active high. */
-
-/* H3600 only EGPIO pins */
-#define EGPIO_H3600_LCD_PCI (1 << 8) /* LCD control IC enable. active high. */
-#define EGPIO_H3600_IR_ON (1 << 9) /* apply power to IR module. active high. */
-#define EGPIO_H3600_AUD_AMP_ON (1 << 10) /* apply power to audio power amp. active high. */
-#define EGPIO_H3600_AUD_PWR_ON (1 << 11) /* apply power to reset of audio circuit. active high. */
-#define EGPIO_H3600_QMUTE (1 << 12) /* mute control for onboard UDA1341. active high. */
-#define EGPIO_H3600_IR_FSEL (1 << 13) /* IR speed select: 1->fast, 0->slow */
-#define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */
-#define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */
-
-
-/* gpiolib versions of EGPIOs */
/* H3100 / 3600 EGPIO pins */
#define H3XXX_EGPIO_BASE (GPIO_MAX + 1)
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff