ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node

ENET_OUT is used as reference clock for the ethernet PHY on the Ka-Ro
TX6 modules. Specify this clock in DTB to let it be managed correctly
by the driver.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index 29f2c2a8f4fd7983650770587249e62bf7af36bd..efd06b576f1da445b991a279a0af48a687a084dc 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -227,6 +227,11 @@
 &fec {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_enet>;
+       clocks = <&clks IMX6QDL_CLK_ENET>,
+                <&clks IMX6QDL_CLK_ENET>,
+                <&clks IMX6QDL_CLK_ENET_REF>,
+                <&clks IMX6QDL_CLK_ENET_REF>;
+       clock-names = "ipg", "ahb", "ptp", "enet_out";
        phy-mode = "rmii";
        phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
        phy-supply = <&reg_3v3_etn>;