- clocks: contains phandle and clock specifier pairs for the entries
in the clock-names property. See
- Documentation/devicetree/binding/clock/clock-bindings.txt
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
Optional properties:
in Documentation/devicetree/bindings/media/video-interfaces.txt,
please refer to the SoC specific binding document:
* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
- * Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+ * Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-------------------------------------------------------------------------------
location and size of the framebuffer memory.
- clocks : phandle + clock specifier pair of the FB reference clock.
- display : phandle to a display node as described in
- Documentation/devicetree/bindings/display/display-timing.txt.
+ Documentation/devicetree/bindings/display/panel/display-timing.txt.
Additionally, the display node has to define properties:
- bits-per-pixel: Bits per pixel.
- ac-prescale : LCD AC bias frequency. This frequency is the required
Can be used in case timings cannot be provided otherwise
or to override timings provided by the panel.
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
Example:
3 - for parallel output,
4 - for write-back interface
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
Required nodes:
- display: Phandle to a display node as described in
- Documentation/devicetree/bindings/display/display-timing.txt
+ Documentation/devicetree/bindings/display/panel/display-timing.txt
Additional, the display node has to define properties:
- bits-per-pixel: Bits per pixel
- fsl,pcr: LCDC PCR value
Optional properties (required if display-timings are used):
- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
- display-timings : A node that describes the display timings as defined in
- Documentation/devicetree/bindings/display/display-timing.txt.
+ Documentation/devicetree/bindings/display/panel/display-timing.txt.
- fsl,data-mapping : should be "spwg" or "jeida"
This describes how the color bits are laid out in the
serialized LVDS signal.
"mediatek,<chip>-disp-rdma"
"mediatek,<chip>-disp-wdma"
- larb: Should contain a phandle pointing to the local arbiter device as defined
- in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
+ in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- iommus: Should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
regulator is wanted.
-[1] Documentation/devicetree/bindings/clocks/clock-bindings.txt
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/graph.txt
[3] Documentation/devicetree/bindings/media/video-interfaces.txt
[4] Documentation/devicetree/bindings/display/panel/
- interrupts: The interrupt signal from the eDP block.
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: device clocks
- See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
- clock-names: the following clocks are required:
* "core_clk"
* "iface_clk"
* "hdmi_tx_l4"
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: device clocks
- See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
- core-vdda-supply: phandle to vdda regulator device node
Example:
'endpoint' node, according to the bindings defined in [3]. This
node should describe panel's video bus.
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
[2]: Documentation/devicetree/bindings/spi/spi-bus.txt
[3]: Documentation/devicetree/bindings/media/video-interfaces.txt
'endpoint' node, according to the bindings defined in [2]. This
node should describe panel's video bus.
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
Required elements: "grf"
For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+ * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
- phys (required)
- phy-names (required)
- hpd-gpios (optional)
- display-timings: typical videomode of lcd panel. Multiple video modes
can be listed if the panel supports multiple timings, but the 'native-mode'
should be the preferred/default resolution. Refer to
- Documentation/devicetree/bindings/display/display-timing.txt for display
+ Documentation/devicetree/bindings/display/panel/display-timing.txt for display
timing binding details.
Optional properties:
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff