bnx2x: Remove 100Mb force speed for BCM84833

Remove unsupported speed of 100Mb force for BCM84833 due to hardware
limitation.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index a688b9d975a2576f5285417d3a23ed53a5c3fb5b..f99c6e312a5d49a072a97354941a7547a19698ba 100644 (file)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -365,13 +365,18 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
        DP(NETIF_MSG_LINK, "cfg_idx = %x\n", cfg_idx);
 
        if (cmd->autoneg == AUTONEG_ENABLE) {
+               u32 an_supported_speed = bp->port.supported[cfg_idx];
+               if (bp->link_params.phy[EXT_PHY1].type ==
+                   PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
+                       an_supported_speed |= (SUPPORTED_100baseT_Half |
+                                              SUPPORTED_100baseT_Full);
                if (!(bp->port.supported[cfg_idx] & SUPPORTED_Autoneg)) {
                        DP(NETIF_MSG_LINK, "Autoneg not supported\n");
                        return -EINVAL;
                }
 
                /* advertise the requested speed and duplex if supported */
-               if (cmd->advertising & ~(bp->port.supported[cfg_idx])) {
+               if (cmd->advertising & ~an_supported_speed) {
                        DP(NETIF_MSG_LINK, "Advertisement parameters "
                                           "are not supported\n");
                        return -EINVAL;

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index cc806378464de3450a6638885e3a4eeb25b1739c..1d1a8093e62e71d057c278cc8bcdbc9247ee7248 100644 (file)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -9454,13 +9454,10 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
                         an_1000_val);
 
        /* set 100 speed advertisement */
-       if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
+       if ((phy->req_line_speed == SPEED_AUTO_NEG) &&
             (phy->speed_cap_mask &
              (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL |
-              PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) &&
-            (phy->supported &
-             (SUPPORTED_100baseT_Half |
-              SUPPORTED_100baseT_Full)))) {
+              PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))) {
                an_10_100_val |= (1<<7);
                /* Enable autoneg and restart autoneg for legacy speeds */
                autoneg_val |= (1<<9 | 1<<12);
@@ -11528,6 +11525,19 @@ static int bnx2x_populate_ext_phy(struct bnx2x *bp,
        }
        phy->mdio_ctrl = bnx2x_get_emac_base(bp, mdc_mdio_access, port);
 
+       if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) &&
+           (phy->ver_addr)) {
+               /*
+                * Remove 100Mb link supported for BCM84833 when phy fw
+                * version lower than or equal to 1.39
+                */
+               u32 raw_ver = REG_RD(bp, phy->ver_addr);
+               if (((raw_ver & 0x7F) <= 39) &&
+                   (((raw_ver & 0xF80) >> 7) <= 1))
+                       phy->supported &= ~(SUPPORTED_100baseT_Half |
+                                           SUPPORTED_100baseT_Full);
+       }
+
        /*
         * In case mdc/mdio_access of the external phy is different than the
         * mdc/mdio access of the XGXS, a HW lock must be taken in each access