else
return 2;
}
+
static void intel_print_wm_latency(struct drm_device *dev,
const char *name,
const uint16_t wm[5])
{
int new_power;
- if (dev_priv->rps.is_bdw_sw_turbo)
- return;
-
new_power = dev_priv->rps.power;
switch (dev_priv->rps.power) {
case LOW_POWER:
valleyview_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit);
else if (IS_VALLEYVIEW(dev))
vlv_set_rps_idle(dev_priv);
- else if (!dev_priv->rps.is_bdw_sw_turbo
- || atomic_read(&dev_priv->rps.sw_turbo.flip_received)){
+ else
gen6_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit);
- }
-
dev_priv->rps.last_adj = 0;
}
mutex_unlock(&dev_priv->rps.hw_lock);
if (dev_priv->rps.enabled) {
if (IS_VALLEYVIEW(dev))
valleyview_set_rps(dev_priv->dev, dev_priv->rps.max_freq_softlimit);
- else if (!dev_priv->rps.is_bdw_sw_turbo
- || atomic_read(&dev_priv->rps.sw_turbo.flip_received)){
+ else
gen6_set_rps(dev_priv->dev, dev_priv->rps.max_freq_softlimit);
- }
-
dev_priv->rps.last_adj = 0;
}
mutex_unlock(&dev_priv->rps.hw_lock);
static void gen8_disable_rps_interrupts(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- if (IS_BROADWELL(dev) && dev_priv->rps.is_bdw_sw_turbo){
- if (atomic_read(&dev_priv->rps.sw_turbo.flip_received))
- del_timer(&dev_priv->rps.sw_turbo.flip_timer);
- dev_priv-> rps.is_bdw_sw_turbo = false;
- } else {
- I915_WRITE(GEN6_PMINTRMSK, ~GEN8_PMINTR_REDIRECT_TO_NON_DISP);
- I915_WRITE(GEN8_GT_IER(2), I915_READ(GEN8_GT_IER(2)) &
- ~dev_priv->pm_rps_events);
- /* Complete PM interrupt masking here doesn't race with the rps work
- * item again unmasking PM interrupts because that is using a different
- * register (GEN8_GT_IMR(2)) to mask PM interrupts. The only risk is in
- * leaving stale bits in GEN8_GT_IIR(2) and GEN8_GT_IMR(2) which
- * gen8_enable_rps will clean up. */
- spin_lock_irq(&dev_priv->irq_lock);
- dev_priv->rps.pm_iir = 0;
- spin_unlock_irq(&dev_priv->irq_lock);
+ I915_WRITE(GEN6_PMINTRMSK, ~GEN8_PMINTR_REDIRECT_TO_NON_DISP);
+ I915_WRITE(GEN8_GT_IER(2), I915_READ(GEN8_GT_IER(2)) &
+ ~dev_priv->pm_rps_events);
+ /* Complete PM interrupt masking here doesn't race with the rps work
+ * item again unmasking PM interrupts because that is using a different
+ * register (GEN8_GT_IMR(2)) to mask PM interrupts. The only risk is in
+ * leaving stale bits in GEN8_GT_IIR(2) and GEN8_GT_IMR(2) which
+ * gen8_enable_rps will clean up. */
- I915_WRITE(GEN8_GT_IIR(2), dev_priv->pm_rps_events);
- }
+ spin_lock_irq(&dev_priv->irq_lock);
+ dev_priv->rps.pm_iir = 0;
+ spin_unlock_irq(&dev_priv->irq_lock);
+
+ I915_WRITE(GEN8_GT_IIR(2), dev_priv->pm_rps_events);
}
static void gen6_disable_rps_interrupts(struct drm_device *dev)
dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq;
}
-static void bdw_sw_calculate_freq(struct drm_device *dev,
- struct intel_rps_bdw_cal *c, u32 *cur_time, u32 *c0)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- u64 busy = 0;
- u32 busyness_pct = 0;
- u32 elapsed_time = 0;
- u16 new_freq = 0;
-
- if (!c || !cur_time || !c0)
- return;
-
- if (0 == c->last_c0)
- goto out;
-
- /* Check Evaluation interval */
- elapsed_time = *cur_time - c->last_ts;
- if (elapsed_time < c->eval_interval)
- return;
-
- mutex_lock(&dev_priv->rps.hw_lock);
-
- /*
- * c0 unit in 32*1.28 usec, elapsed_time unit in 1 usec.
- * Whole busyness_pct calculation should be
- * busy = ((u64)(*c0 - c->last_c0) << 5 << 7) / 100;
- * busyness_pct = (u32)(busy * 100 / elapsed_time);
- * The final formula is to simplify CPU calculation
- */
- busy = (u64)(*c0 - c->last_c0) << 12;
- do_div(busy, elapsed_time);
- busyness_pct = (u32)busy;
-
- if (c->is_up && busyness_pct >= c->it_threshold_pct)
- new_freq = (u16)dev_priv->rps.cur_freq + 3;
- if (!c->is_up && busyness_pct <= c->it_threshold_pct)
- new_freq = (u16)dev_priv->rps.cur_freq - 1;
-
- /* Adjust to new frequency busyness and compare with threshold */
- if (0 != new_freq) {
- if (new_freq > dev_priv->rps.max_freq_softlimit)
- new_freq = dev_priv->rps.max_freq_softlimit;
- else if (new_freq < dev_priv->rps.min_freq_softlimit)
- new_freq = dev_priv->rps.min_freq_softlimit;
-
- gen6_set_rps(dev, new_freq);
- }
-
- mutex_unlock(&dev_priv->rps.hw_lock);
-
-out:
- c->last_c0 = *c0;
- c->last_ts = *cur_time;
-}
-
-static void gen8_set_frequency_RP0(struct work_struct *work)
-{
- struct intel_rps_bdw_turbo *p_bdw_turbo =
- container_of(work, struct intel_rps_bdw_turbo, work_max_freq);
- struct intel_gen6_power_mgmt *p_power_mgmt =
- container_of(p_bdw_turbo, struct intel_gen6_power_mgmt, sw_turbo);
- struct drm_i915_private *dev_priv =
- container_of(p_power_mgmt, struct drm_i915_private, rps);
-
- mutex_lock(&dev_priv->rps.hw_lock);
- gen6_set_rps(dev_priv->dev, dev_priv->rps.rp0_freq);
- mutex_unlock(&dev_priv->rps.hw_lock);
-}
-
-static void flip_active_timeout_handler(unsigned long var)
-{
- struct drm_i915_private *dev_priv = (struct drm_i915_private *) var;
-
- del_timer(&dev_priv->rps.sw_turbo.flip_timer);
- atomic_set(&dev_priv->rps.sw_turbo.flip_received, false);
-
- queue_work(dev_priv->wq, &dev_priv->rps.sw_turbo.work_max_freq);
-}
-
-void bdw_software_turbo(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- u32 current_time = I915_READ(TIMESTAMP_CTR); /* unit in usec */
- u32 current_c0 = I915_READ(MCHBAR_PCU_C0); /* unit in 32*1.28 usec */
-
- bdw_sw_calculate_freq(dev, &dev_priv->rps.sw_turbo.up,
- ¤t_time, ¤t_c0);
- bdw_sw_calculate_freq(dev, &dev_priv->rps.sw_turbo.down,
- ¤t_time, ¤t_c0);
-}
-
static void gen8_enable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_engine_cs *ring;
uint32_t rc6_mask = 0, rp_state_cap;
- uint32_t threshold_up_pct, threshold_down_pct;
- uint32_t ei_up, ei_down; /* up and down evaluation interval */
- u32 rp_ctl_flag;
int unused;
- /* Use software Turbo for BDW */
- dev_priv->rps.is_bdw_sw_turbo = IS_BROADWELL(dev);
-
/* 1a: Software RC state - RC0 */
I915_WRITE(GEN6_RC_STATE, 0);
HSW_FREQUENCY(dev_priv->rps.rp1_freq));
I915_WRITE(GEN6_RC_VIDEO_FREQ,
HSW_FREQUENCY(dev_priv->rps.rp1_freq));
- ei_up = 84480; /* 84.48ms */
- ei_down = 448000;
- threshold_up_pct = 90; /* x percent busy */
- threshold_down_pct = 70;
-
- if (dev_priv->rps.is_bdw_sw_turbo) {
- dev_priv->rps.sw_turbo.up.it_threshold_pct = threshold_up_pct;
- dev_priv->rps.sw_turbo.up.eval_interval = ei_up;
- dev_priv->rps.sw_turbo.up.is_up = true;
- dev_priv->rps.sw_turbo.up.last_ts = 0;
- dev_priv->rps.sw_turbo.up.last_c0 = 0;
-
- dev_priv->rps.sw_turbo.down.it_threshold_pct = threshold_down_pct;
- dev_priv->rps.sw_turbo.down.eval_interval = ei_down;
- dev_priv->rps.sw_turbo.down.is_up = false;
- dev_priv->rps.sw_turbo.down.last_ts = 0;
- dev_priv->rps.sw_turbo.down.last_c0 = 0;
-
- /* Start the timer to track if flip comes*/
- dev_priv->rps.sw_turbo.timeout = 200*1000; /* in us */
-
- init_timer(&dev_priv->rps.sw_turbo.flip_timer);
- dev_priv->rps.sw_turbo.flip_timer.function = flip_active_timeout_handler;
- dev_priv->rps.sw_turbo.flip_timer.data = (unsigned long) dev_priv;
- dev_priv->rps.sw_turbo.flip_timer.expires =
- usecs_to_jiffies(dev_priv->rps.sw_turbo.timeout) + jiffies;
- add_timer(&dev_priv->rps.sw_turbo.flip_timer);
- INIT_WORK(&dev_priv->rps.sw_turbo.work_max_freq, gen8_set_frequency_RP0);
-
- atomic_set(&dev_priv->rps.sw_turbo.flip_received, true);
- } else {
- /* NB: Docs say 1s, and 1000000 - which aren't equivalent
- * 1 second timeout*/
- I915_WRITE(GEN6_RP_DOWN_TIMEOUT, FREQ_1_28_US(1000000));
+ /* NB: Docs say 1s, and 1000000 - which aren't equivalent */
+ I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 100000000 / 128); /* 1 second timeout */
- /* Docs recommend 900MHz, and 300 MHz respectively */
- I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
- dev_priv->rps.max_freq_softlimit << 24 |
- dev_priv->rps.min_freq_softlimit << 16);
+ /* Docs recommend 900MHz, and 300 MHz respectively */
+ I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
+ dev_priv->rps.max_freq_softlimit << 24 |
+ dev_priv->rps.min_freq_softlimit << 16);
- I915_WRITE(GEN6_RP_UP_THRESHOLD,
- FREQ_1_28_US(ei_up * threshold_up_pct / 100));
- I915_WRITE(GEN6_RP_DOWN_THRESHOLD,
- FREQ_1_28_US(ei_down * threshold_down_pct / 100));
- I915_WRITE(GEN6_RP_UP_EI,
- FREQ_1_28_US(ei_up));
- I915_WRITE(GEN6_RP_DOWN_EI,
- FREQ_1_28_US(ei_down));
+ I915_WRITE(GEN6_RP_UP_THRESHOLD, 7600000 / 128); /* 76ms busyness per EI, 90% */
+ I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 31300000 / 128); /* 313ms busyness per EI, 70%*/
+ I915_WRITE(GEN6_RP_UP_EI, 66000); /* 84.48ms, XXX: random? */
+ I915_WRITE(GEN6_RP_DOWN_EI, 350000); /* 448ms, XXX: random? */
- I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
- }
+ I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
/* 5: Enable RPS */
- rp_ctl_flag = GEN6_RP_MEDIA_TURBO |
- GEN6_RP_MEDIA_HW_NORMAL_MODE |
- GEN6_RP_MEDIA_IS_GFX |
- GEN6_RP_UP_BUSY_AVG |
- GEN6_RP_DOWN_IDLE_AVG;
- if (!dev_priv->rps.is_bdw_sw_turbo)
- rp_ctl_flag |= GEN6_RP_ENABLE;
-
- I915_WRITE(GEN6_RP_CONTROL, rp_ctl_flag);
-
- /* 6: Ring frequency + overclocking
- * (our driver does this later */
+ I915_WRITE(GEN6_RP_CONTROL,
+ GEN6_RP_MEDIA_TURBO |
+ GEN6_RP_MEDIA_HW_NORMAL_MODE |
+ GEN6_RP_MEDIA_IS_GFX |
+ GEN6_RP_ENABLE |
+ GEN6_RP_UP_BUSY_AVG |
+ GEN6_RP_DOWN_IDLE_AVG);
+
+ /* 6: Ring frequency + overclocking (our driver does this later */
+
gen6_set_rps(dev, (I915_READ(GEN6_GT_PERF_STATUS) & 0xff00) >> 8);
- if (!dev_priv->rps.is_bdw_sw_turbo)
- gen8_enable_rps_interrupts(dev);
+
+ gen8_enable_rps_interrupts(dev);
gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL);
}
rps.delayed_resume_work.work);
struct drm_device *dev = dev_priv->dev;
- dev_priv->rps.is_bdw_sw_turbo = false;
-
mutex_lock(&dev_priv->rps.hw_lock);
if (IS_CHERRYVIEW(dev)) {
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff