ARM: S3C64XX: DMA: Make src and dst transfer size same

Some devices don't seem to work if the source and desitnation transfer
widths are not same. For example, SPI dma xfers, with 8bits/word,
don't work without this patch.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index 5a08a86419dde48d26dcfa4fda0410dd6661b22c..a94281bb84d6879e9088044a537472c813364974 100644 (file)
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -151,8 +151,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
                src = chan->dev_addr;
                dst = data;
                control0 = PL080_CONTROL_SRC_AHB2;
-               control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
-               control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
                control0 |= PL080_CONTROL_DST_INCR;
                break;
 
@@ -160,8 +158,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
                src = data;
                dst = chan->dev_addr;
                control0 = PL080_CONTROL_DST_AHB2;
-               control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
-               control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
                control0 |= PL080_CONTROL_SRC_INCR;
                break;
        default:
@@ -173,6 +169,8 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
        control1 = size >> chan->hw_width;      /* size in no of xfers */
        control0 |= PL080_CONTROL_PROT_SYS;     /* always in priv. mode */
        control0 |= PL080_CONTROL_TC_IRQ_EN;    /* always fire IRQ */
+       control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+       control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
 
        lli->src_addr = src;
        lli->dst_addr = dst;