ARM: dove: add PCIe controllers to SoC DT

This adds a node for the pcie controllers found on Dove SoCs to the
SoC DT include.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index d42b323e7593fe599123465382c781b101709f7e..499abadf86f0b1fd3367e14739d186507000170f 100644 (file)
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -44,6 +44,60 @@
                          MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
                          MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
 
+               pcie: pcie-controller {
+                       compatible = "marvell,dove-pcie";
+                       status = "disabled";
+                       device_type = "pci";
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+
+                       msi-parent = <&intc>;
+                       bus-range = <0x00 0xff>;
+
+                       ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
+                                 0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
+                                 0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0   /* Port 0.0 Mem */
+                                 0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0   /* Port 0.0 I/O */
+                                 0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
+                                 0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
+
+                       pcie-port@0 {
+                               device_type = "pci";
+                               status = "disabled";
+                               assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+                               reg = <0x0800 0 0 0 0>;
+                               clocks = <&gate_clk 4>;
+                               marvell,pcie-port = <0>;
+
+                               #address-cells = <3>;
+                               #size-cells = <2>;
+                               ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+                                         0x81000000 0 0 0x81000000 0x1 0 1 0>;
+
+                               #interrupt-cells = <1>;
+                               interrupt-map-mask = <0 0 0 0>;
+                               interrupt-map = <0 0 0 0 &intc 16>;
+                       };
+
+                       pcie-port@1 {
+                               device_type = "pci";
+                               status = "disabled";
+                               assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+                               reg = <0x1000 0 0 0 0>;
+                               clocks = <&gate_clk 5>;
+                               marvell,pcie-port = <1>;
+
+                               #address-cells = <3>;
+                               #size-cells = <2>;
+                               ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+                                         0x81000000 0 0 0x81000000 0x2 0 1 0>;
+
+                               #interrupt-cells = <1>;
+                               interrupt-map-mask = <0 0 0 0>;
+                               interrupt-map = <0 0 0 0 &intc 18>;
+                       };
+               };
+
                internal-regs {
                        compatible = "simple-bus";
                        #address-cells = <1>;