staging: comedi: ni_labpc: rename some of the private data variables
authorH Hartley Sweeten <hsweeten@visionengravers.com>
Fri, 22 Mar 2013 16:41:22 +0000 (09:41 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Mon, 25 Mar 2013 18:39:21 +0000 (11:39 -0700)
For aesthetic reasons, rename the 'command*_bits' and 'status*_bits'
variables in the private data in order to shorten some of the long
lines.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/ni_labpc.c
drivers/staging/comedi/drivers/ni_labpc.h

index 05751467e4223f4f9cefbaf7148d794baeda59c8..44416fee6a6bd61b3b496f81e687bf3ee7d32721 100644 (file)
@@ -445,52 +445,51 @@ static int labpc_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 
        /*  disable timed conversions */
        spin_lock_irqsave(&dev->spinlock, flags);
-       devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
-       devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
+       devpriv->cmd2 &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
+       devpriv->write_byte(devpriv->cmd2, dev->iobase + COMMAND2_REG);
        spin_unlock_irqrestore(&dev->spinlock, flags);
 
        /*  disable interrupt generation and dma */
-       devpriv->command3_bits = 0;
-       devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
+       devpriv->cmd3 = 0;
+       devpriv->write_byte(devpriv->cmd3, dev->iobase + COMMAND3_REG);
 
        /* set gain and channel */
-       devpriv->command1_bits = 0;
+       devpriv->cmd1 = 0;
        chan = CR_CHAN(insn->chanspec);
        range = CR_RANGE(insn->chanspec);
-       devpriv->command1_bits |= thisboard->ai_range_code[range];
+       devpriv->cmd1 |= thisboard->ai_range_code[range];
        /* munge channel bits for differential/scan disabled mode */
        if (CR_AREF(insn->chanspec) == AREF_DIFF)
                chan *= 2;
-       devpriv->command1_bits |= ADC_CHAN_BITS(chan);
-       devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG);
+       devpriv->cmd1 |= ADC_CHAN_BITS(chan);
+       devpriv->write_byte(devpriv->cmd1, dev->iobase + COMMAND1_REG);
 
-       /* setup command6 register for 1200 boards */
+       /* setup cmd6 register for 1200 boards */
        if (thisboard->register_layout == labpc_1200_layout) {
                /*  reference inputs to ground or common? */
                if (CR_AREF(insn->chanspec) != AREF_GROUND)
-                       devpriv->command6_bits |= ADC_COMMON_BIT;
+                       devpriv->cmd6 |= ADC_COMMON_BIT;
                else
-                       devpriv->command6_bits &= ~ADC_COMMON_BIT;
+                       devpriv->cmd6 &= ~ADC_COMMON_BIT;
                /* bipolar or unipolar range? */
                if (thisboard->ai_range_is_unipolar[range])
-                       devpriv->command6_bits |= ADC_UNIP_BIT;
+                       devpriv->cmd6 |= ADC_UNIP_BIT;
                else
-                       devpriv->command6_bits &= ~ADC_UNIP_BIT;
+                       devpriv->cmd6 &= ~ADC_UNIP_BIT;
                /* don't interrupt on fifo half full */
-               devpriv->command6_bits &= ~ADC_FHF_INTR_EN_BIT;
+               devpriv->cmd6 &= ~ADC_FHF_INTR_EN_BIT;
                /* don't enable interrupt on counter a1 terminal count? */
-               devpriv->command6_bits &= ~A1_INTR_EN_BIT;
+               devpriv->cmd6 &= ~A1_INTR_EN_BIT;
                /* write to register */
-               devpriv->write_byte(devpriv->command6_bits,
-                                   dev->iobase + COMMAND6_REG);
+               devpriv->write_byte(devpriv->cmd6, dev->iobase + COMMAND6_REG);
        }
-       /* setup command4 register */
-       devpriv->command4_bits = 0;
-       devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
+       /* setup cmd4 register */
+       devpriv->cmd4 = 0;
+       devpriv->cmd4 |= EXT_CONVERT_DISABLE_BIT;
        /* single-ended/differential */
        if (CR_AREF(insn->chanspec) == AREF_DIFF)
-               devpriv->command4_bits |= ADC_DIFF_BIT;
-       devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
+               devpriv->cmd4 |= ADC_DIFF_BIT;
+       devpriv->write_byte(devpriv->cmd4, dev->iobase + COMMAND4_REG);
 
        /*
         * initialize pacer counter output to make sure it doesn't
@@ -939,12 +938,12 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 
        /* make sure board is disabled before setting up acquisition */
        spin_lock_irqsave(&dev->spinlock, flags);
-       devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
-       devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
+       devpriv->cmd2 &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
+       devpriv->write_byte(devpriv->cmd2, dev->iobase + COMMAND2_REG);
        spin_unlock_irqrestore(&dev->spinlock, flags);
 
-       devpriv->command3_bits = 0;
-       devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
+       devpriv->cmd3 = 0;
+       devpriv->write_byte(devpriv->cmd3, dev->iobase + COMMAND3_REG);
 
        /*  initialize software conversion count */
        if (cmd->stop_src == TRIG_COUNT)
@@ -994,40 +993,39 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
        devpriv->current_transfer = xfer;
        mode = labpc_ai_scan_mode(cmd);
 
-       /*  setup command6 register for 1200 boards */
+       /*  setup cmd6 register for 1200 boards */
        if (thisboard->register_layout == labpc_1200_layout) {
                /*  reference inputs to ground or common? */
                if (aref != AREF_GROUND)
-                       devpriv->command6_bits |= ADC_COMMON_BIT;
+                       devpriv->cmd6 |= ADC_COMMON_BIT;
                else
-                       devpriv->command6_bits &= ~ADC_COMMON_BIT;
+                       devpriv->cmd6 &= ~ADC_COMMON_BIT;
                /*  bipolar or unipolar range? */
                if (thisboard->ai_range_is_unipolar[range])
-                       devpriv->command6_bits |= ADC_UNIP_BIT;
+                       devpriv->cmd6 |= ADC_UNIP_BIT;
                else
-                       devpriv->command6_bits &= ~ADC_UNIP_BIT;
+                       devpriv->cmd6 &= ~ADC_UNIP_BIT;
                /*  interrupt on fifo half full? */
                if (xfer == fifo_half_full_transfer)
-                       devpriv->command6_bits |= ADC_FHF_INTR_EN_BIT;
+                       devpriv->cmd6 |= ADC_FHF_INTR_EN_BIT;
                else
-                       devpriv->command6_bits &= ~ADC_FHF_INTR_EN_BIT;
+                       devpriv->cmd6 &= ~ADC_FHF_INTR_EN_BIT;
                /*  enable interrupt on counter a1 terminal count? */
                if (cmd->stop_src == TRIG_EXT)
-                       devpriv->command6_bits |= A1_INTR_EN_BIT;
+                       devpriv->cmd6 |= A1_INTR_EN_BIT;
                else
-                       devpriv->command6_bits &= ~A1_INTR_EN_BIT;
+                       devpriv->cmd6 &= ~A1_INTR_EN_BIT;
                /*  are we scanning up or down through channels? */
                if (mode == MODE_MULT_CHAN_UP)
-                       devpriv->command6_bits |= ADC_SCAN_UP_BIT;
+                       devpriv->cmd6 |= ADC_SCAN_UP_BIT;
                else
-                       devpriv->command6_bits &= ~ADC_SCAN_UP_BIT;
+                       devpriv->cmd6 &= ~ADC_SCAN_UP_BIT;
                /*  write to register */
-               devpriv->write_byte(devpriv->command6_bits,
-                                   dev->iobase + COMMAND6_REG);
+               devpriv->write_byte(devpriv->cmd6, dev->iobase + COMMAND6_REG);
        }
 
-       /* setup channel list, etc (command1 register) */
-       devpriv->command1_bits = 0;
+       /* setup channel list, etc (cmd1 register) */
+       devpriv->cmd1 = 0;
        if (mode == MODE_MULT_CHAN_UP)
                channel = CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1]);
        else
@@ -1036,18 +1034,17 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
        if ((mode == MODE_SINGLE_CHAN || mode == MODE_SINGLE_CHAN_INTERVAL) &&
            aref == AREF_DIFF)
                channel *= 2;
-       devpriv->command1_bits |= ADC_CHAN_BITS(channel);
-       devpriv->command1_bits |= thisboard->ai_range_code[range];
-       devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG);
+       devpriv->cmd1 |= ADC_CHAN_BITS(channel);
+       devpriv->cmd1 |= thisboard->ai_range_code[range];
+       devpriv->write_byte(devpriv->cmd1, dev->iobase + COMMAND1_REG);
        /* manual says to set scan enable bit on second pass */
        if (mode == MODE_MULT_CHAN_UP || mode == MODE_MULT_CHAN_DOWN) {
-               devpriv->command1_bits |= ADC_SCAN_EN_BIT;
+               devpriv->cmd1 |= ADC_SCAN_EN_BIT;
                /* need a brief delay before enabling scan, or scan
                 * list will get screwed when you switch
                 * between scan up to scan down mode - dunno why */
                udelay(1);
-               devpriv->write_byte(devpriv->command1_bits,
-                                   dev->iobase + COMMAND1_REG);
+               devpriv->write_byte(devpriv->cmd1, dev->iobase + COMMAND1_REG);
        }
 
        devpriv->write_byte(cmd->chanlist_len,
@@ -1114,50 +1111,50 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
                enable_dma(devpriv->dma_chan);
                release_dma_lock(irq_flags);
                /*  enable board's dma */
-               devpriv->command3_bits |= DMA_EN_BIT | DMATC_INTR_EN_BIT;
+               devpriv->cmd3 |= DMA_EN_BIT | DMATC_INTR_EN_BIT;
        } else
-               devpriv->command3_bits &= ~DMA_EN_BIT & ~DMATC_INTR_EN_BIT;
+               devpriv->cmd3 &= ~DMA_EN_BIT & ~DMATC_INTR_EN_BIT;
 #endif
 
        /*  enable error interrupts */
-       devpriv->command3_bits |= ERR_INTR_EN_BIT;
+       devpriv->cmd3 |= ERR_INTR_EN_BIT;
        /*  enable fifo not empty interrupt? */
        if (xfer == fifo_not_empty_transfer)
-               devpriv->command3_bits |= ADC_FNE_INTR_EN_BIT;
+               devpriv->cmd3 |= ADC_FNE_INTR_EN_BIT;
        else
-               devpriv->command3_bits &= ~ADC_FNE_INTR_EN_BIT;
-       devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
+               devpriv->cmd3 &= ~ADC_FNE_INTR_EN_BIT;
+       devpriv->write_byte(devpriv->cmd3, dev->iobase + COMMAND3_REG);
 
-       /*  setup any external triggering/pacing (command4 register) */
-       devpriv->command4_bits = 0;
+       /*  setup any external triggering/pacing (cmd4 register) */
+       devpriv->cmd4 = 0;
        if (cmd->convert_src != TRIG_EXT)
-               devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
+               devpriv->cmd4 |= EXT_CONVERT_DISABLE_BIT;
        /* XXX should discard first scan when using interval scanning
         * since manual says it is not synced with scan clock */
        if (labpc_use_continuous_mode(cmd, mode) == 0) {
-               devpriv->command4_bits |= INTERVAL_SCAN_EN_BIT;
+               devpriv->cmd4 |= INTERVAL_SCAN_EN_BIT;
                if (cmd->scan_begin_src == TRIG_EXT)
-                       devpriv->command4_bits |= EXT_SCAN_EN_BIT;
+                       devpriv->cmd4 |= EXT_SCAN_EN_BIT;
        }
        /*  single-ended/differential */
        if (aref == AREF_DIFF)
-               devpriv->command4_bits |= ADC_DIFF_BIT;
-       devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
+               devpriv->cmd4 |= ADC_DIFF_BIT;
+       devpriv->write_byte(devpriv->cmd4, dev->iobase + COMMAND4_REG);
 
        /*  startup acquisition */
 
-       /*  command2 reg */
+       /*  cmd2 reg */
        /*  use 2 cascaded counters for pacing */
        spin_lock_irqsave(&dev->spinlock, flags);
-       devpriv->command2_bits |= CASCADE_BIT;
+       devpriv->cmd2 |= CASCADE_BIT;
        switch (cmd->start_src) {
        case TRIG_EXT:
-               devpriv->command2_bits |= HWTRIG_BIT;
-               devpriv->command2_bits &= ~PRETRIG_BIT & ~SWTRIG_BIT;
+               devpriv->cmd2 |= HWTRIG_BIT;
+               devpriv->cmd2 &= ~PRETRIG_BIT & ~SWTRIG_BIT;
                break;
        case TRIG_NOW:
-               devpriv->command2_bits |= SWTRIG_BIT;
-               devpriv->command2_bits &= ~PRETRIG_BIT & ~HWTRIG_BIT;
+               devpriv->cmd2 |= SWTRIG_BIT;
+               devpriv->cmd2 &= ~PRETRIG_BIT & ~HWTRIG_BIT;
                break;
        default:
                comedi_error(dev, "bug with start_src");
@@ -1167,7 +1164,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
        }
        switch (cmd->stop_src) {
        case TRIG_EXT:
-               devpriv->command2_bits |= HWTRIG_BIT | PRETRIG_BIT;
+               devpriv->cmd2 |= HWTRIG_BIT | PRETRIG_BIT;
                break;
        case TRIG_COUNT:
        case TRIG_NONE:
@@ -1177,7 +1174,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
                spin_unlock_irqrestore(&dev->spinlock, flags);
                return -1;
        }
-       devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
+       devpriv->write_byte(devpriv->cmd2, dev->iobase + COMMAND2_REG);
        spin_unlock_irqrestore(&dev->spinlock, flags);
 
        return 0;
@@ -1189,12 +1186,12 @@ static int labpc_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
        unsigned long flags;
 
        spin_lock_irqsave(&dev->spinlock, flags);
-       devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
-       devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
+       devpriv->cmd2 &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
+       devpriv->write_byte(devpriv->cmd2, dev->iobase + COMMAND2_REG);
        spin_unlock_irqrestore(&dev->spinlock, flags);
 
-       devpriv->command3_bits = 0;
-       devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
+       devpriv->cmd3 = 0;
+       devpriv->write_byte(devpriv->cmd3, dev->iobase + COMMAND3_REG);
 
        return 0;
 }
@@ -1210,7 +1207,7 @@ static void labpc_drain_dma(struct comedi_device *dev)
        unsigned int max_points, num_points, residue, leftover;
        int i;
 
-       status = devpriv->status1_bits;
+       status = devpriv->stat1;
 
        flags = claim_dma_lock();
        disable_dma(devpriv->dma_chan);
@@ -1277,9 +1274,9 @@ static int labpc_drain_fifo(struct comedi_device *dev)
        const int timeout = 10000;
        unsigned int i;
 
-       devpriv->status1_bits = devpriv->read_byte(dev->iobase + STATUS1_REG);
+       devpriv->stat1 = devpriv->read_byte(dev->iobase + STATUS1_REG);
 
-       for (i = 0; (devpriv->status1_bits & DATA_AVAIL_BIT) && i < timeout;
+       for (i = 0; (devpriv->stat1 & DATA_AVAIL_BIT) && i < timeout;
             i++) {
                /*  quit if we have all the data we want */
                if (async->cmd.stop_src == TRIG_COUNT) {
@@ -1291,8 +1288,7 @@ static int labpc_drain_fifo(struct comedi_device *dev)
                msb = devpriv->read_byte(dev->iobase + ADC_FIFO_REG);
                data = (msb << 8) | lsb;
                cfc_write_to_buffer(dev->read_subdev, data);
-               devpriv->status1_bits =
-                   devpriv->read_byte(dev->iobase + STATUS1_REG);
+               devpriv->stat1 = devpriv->read_byte(dev->iobase + STATUS1_REG);
        }
        if (i == timeout) {
                comedi_error(dev, "ai timeout, fifo never empties");
@@ -1337,19 +1333,18 @@ static irqreturn_t labpc_interrupt(int irq, void *d)
        async->events = 0;
 
        /* read board status */
-       devpriv->status1_bits = devpriv->read_byte(dev->iobase + STATUS1_REG);
+       devpriv->stat1 = devpriv->read_byte(dev->iobase + STATUS1_REG);
        if (thisboard->register_layout == labpc_1200_layout)
-               devpriv->status2_bits =
-                   devpriv->read_byte(dev->iobase + STATUS2_REG);
+               devpriv->stat2 = devpriv->read_byte(dev->iobase + STATUS2_REG);
 
-       if ((devpriv->status1_bits & (DMATC_BIT | TIMER_BIT | OVERFLOW_BIT |
-                                     OVERRUN_BIT | DATA_AVAIL_BIT)) == 0
-           && (devpriv->status2_bits & A1_TC_BIT) == 0
-           && (devpriv->status2_bits & FNHF_BIT)) {
+       if ((devpriv->stat1 & (DMATC_BIT | TIMER_BIT | OVERFLOW_BIT |
+                              OVERRUN_BIT | DATA_AVAIL_BIT)) == 0
+           && (devpriv->stat2 & A1_TC_BIT) == 0
+           && (devpriv->stat2 & FNHF_BIT)) {
                return IRQ_NONE;
        }
 
-       if (devpriv->status1_bits & OVERRUN_BIT) {
+       if (devpriv->stat1 & OVERRUN_BIT) {
                /* clear error interrupt */
                devpriv->write_byte(0x1, dev->iobase + ADC_CLEAR_REG);
                async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
@@ -1364,22 +1359,22 @@ static irqreturn_t labpc_interrupt(int irq, void *d)
                 * if a dma terminal count of external stop trigger
                 * has occurred
                 */
-               if (devpriv->status1_bits & DMATC_BIT ||
+               if (devpriv->stat1 & DMATC_BIT ||
                    (thisboard->register_layout == labpc_1200_layout
-                    && devpriv->status2_bits & A1_TC_BIT)) {
+                    && devpriv->stat2 & A1_TC_BIT)) {
                        handle_isa_dma(dev);
                }
        } else
 #endif
                labpc_drain_fifo(dev);
 
-       if (devpriv->status1_bits & TIMER_BIT) {
+       if (devpriv->stat1 & TIMER_BIT) {
                comedi_error(dev, "handled timer interrupt?");
                /*  clear it */
                devpriv->write_byte(0x1, dev->iobase + TIMER_CLEAR_REG);
        }
 
-       if (devpriv->status1_bits & OVERFLOW_BIT) {
+       if (devpriv->stat1 & OVERFLOW_BIT) {
                /*  clear error interrupt */
                devpriv->write_byte(0x1, dev->iobase + ADC_CLEAR_REG);
                async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
@@ -1389,7 +1384,7 @@ static irqreturn_t labpc_interrupt(int irq, void *d)
        }
        /*  handle external stop trigger */
        if (cmd->stop_src == TRIG_EXT) {
-               if (devpriv->status2_bits & A1_TC_BIT) {
+               if (devpriv->stat2 & A1_TC_BIT) {
                        labpc_drain_dregs(dev);
                        labpc_cancel(dev, s);
                        async->events |= COMEDI_CB_EOA;
@@ -1424,20 +1419,19 @@ static int labpc_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
        /* note: hardware bug in daqcard-1200 means pacing cannot
         * be independently enabled/disabled for its the two channels */
        spin_lock_irqsave(&dev->spinlock, flags);
-       devpriv->command2_bits &= ~DAC_PACED_BIT(channel);
-       devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
+       devpriv->cmd2 &= ~DAC_PACED_BIT(channel);
+       devpriv->write_byte(devpriv->cmd2, dev->iobase + COMMAND2_REG);
        spin_unlock_irqrestore(&dev->spinlock, flags);
 
        /* set range */
        if (thisboard->register_layout == labpc_1200_layout) {
                range = CR_RANGE(insn->chanspec);
                if (range & AO_RANGE_IS_UNIPOLAR)
-                       devpriv->command6_bits |= DAC_UNIP_BIT(channel);
+                       devpriv->cmd6 |= DAC_UNIP_BIT(channel);
                else
-                       devpriv->command6_bits &= ~DAC_UNIP_BIT(channel);
+                       devpriv->cmd6 &= ~DAC_UNIP_BIT(channel);
                /*  write to register */
-               devpriv->write_byte(devpriv->command6_bits,
-                                   dev->iobase + COMMAND6_REG);
+               devpriv->write_byte(devpriv->cmd6, dev->iobase + COMMAND6_REG);
        }
        /* send data */
        lsb = data[0] & 0xff;
@@ -1482,19 +1476,18 @@ static void labpc_serial_out(struct comedi_device *dev, unsigned int value,
 
        for (i = 1; i <= value_width; i++) {
                /*  clear serial clock */
-               devpriv->command5_bits &= ~SCLOCK_BIT;
+               devpriv->cmd5 &= ~SCLOCK_BIT;
                /*  send bits most significant bit first */
                if (value & (1 << (value_width - i)))
-                       devpriv->command5_bits |= SDATA_BIT;
+                       devpriv->cmd5 |= SDATA_BIT;
                else
-                       devpriv->command5_bits &= ~SDATA_BIT;
+                       devpriv->cmd5 &= ~SDATA_BIT;
                udelay(1);
-               devpriv->write_byte(devpriv->command5_bits,
-                                   dev->iobase + COMMAND5_REG);
+               devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
                /*  set clock to load bit */
-               devpriv->command5_bits |= SCLOCK_BIT;
+               devpriv->cmd5 |= SCLOCK_BIT;
                udelay(1);
-               devpriv->write_byte(devpriv->command5_bits,
+               devpriv->write_byte(devpriv->cmd5,
                                    dev->iobase + COMMAND5_REG);
        }
 }
@@ -1509,20 +1502,17 @@ static unsigned int labpc_serial_in(struct comedi_device *dev)
 
        for (i = 1; i <= value_width; i++) {
                /*  set serial clock */
-               devpriv->command5_bits |= SCLOCK_BIT;
+               devpriv->cmd5 |= SCLOCK_BIT;
                udelay(1);
-               devpriv->write_byte(devpriv->command5_bits,
-                                   dev->iobase + COMMAND5_REG);
+               devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
                /*  clear clock bit */
-               devpriv->command5_bits &= ~SCLOCK_BIT;
+               devpriv->cmd5 &= ~SCLOCK_BIT;
                udelay(1);
-               devpriv->write_byte(devpriv->command5_bits,
-                                   dev->iobase + COMMAND5_REG);
+               devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
                /*  read bits most significant bit first */
                udelay(1);
-               devpriv->status2_bits =
-                   devpriv->read_byte(dev->iobase + STATUS2_REG);
-               if (devpriv->status2_bits & EEPROM_OUT_BIT)
+               devpriv->stat2 = devpriv->read_byte(dev->iobase + STATUS2_REG);
+               if (devpriv->stat2 & EEPROM_OUT_BIT)
                        value |= 1 << (value_width - i);
        }
 
@@ -1540,12 +1530,12 @@ static unsigned int labpc_eeprom_read(struct comedi_device *dev,
        const int write_length = 8;
 
        /*  enable read/write to eeprom */
-       devpriv->command5_bits &= ~EEPROM_EN_BIT;
+       devpriv->cmd5 &= ~EEPROM_EN_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
-       devpriv->command5_bits |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
+       devpriv->cmd5 |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
 
        /*  send read instruction */
        labpc_serial_out(dev, read_instruction, write_length);
@@ -1555,9 +1545,9 @@ static unsigned int labpc_eeprom_read(struct comedi_device *dev,
        value = labpc_serial_in(dev);
 
        /*  disable read/write to eeprom */
-       devpriv->command5_bits &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
+       devpriv->cmd5 &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
 
        return value;
 }
@@ -1570,12 +1560,12 @@ static unsigned int labpc_eeprom_read_status(struct comedi_device *dev)
        const int write_length = 8;     /*  8 bit write lengths to eeprom */
 
        /*  enable read/write to eeprom */
-       devpriv->command5_bits &= ~EEPROM_EN_BIT;
+       devpriv->cmd5 &= ~EEPROM_EN_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
-       devpriv->command5_bits |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
+       devpriv->cmd5 |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
 
        /*  send read status instruction */
        labpc_serial_out(dev, read_status_instruction, write_length);
@@ -1583,9 +1573,9 @@ static unsigned int labpc_eeprom_read_status(struct comedi_device *dev)
        value = labpc_serial_in(dev);
 
        /*  disable read/write to eeprom */
-       devpriv->command5_bits &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
+       devpriv->cmd5 &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
 
        return value;
 }
@@ -1615,36 +1605,36 @@ static int labpc_eeprom_write(struct comedi_device *dev,
        devpriv->eeprom_data[address] = value;
 
        /*  enable read/write to eeprom */
-       devpriv->command5_bits &= ~EEPROM_EN_BIT;
+       devpriv->cmd5 &= ~EEPROM_EN_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
-       devpriv->command5_bits |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
+       devpriv->cmd5 |= EEPROM_EN_BIT | EEPROM_WRITE_UNPROTECT_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
 
        /*  send write_enable instruction */
        labpc_serial_out(dev, write_enable_instruction, write_length);
-       devpriv->command5_bits &= ~EEPROM_EN_BIT;
+       devpriv->cmd5 &= ~EEPROM_EN_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
 
        /*  send write instruction */
-       devpriv->command5_bits |= EEPROM_EN_BIT;
+       devpriv->cmd5 |= EEPROM_EN_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
        labpc_serial_out(dev, write_instruction, write_length);
        /*  send 8 bit address to write to */
        labpc_serial_out(dev, address, write_length);
        /*  write value */
        labpc_serial_out(dev, value, write_length);
-       devpriv->command5_bits &= ~EEPROM_EN_BIT;
+       devpriv->cmd5 &= ~EEPROM_EN_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
 
        /*  disable read/write to eeprom */
-       devpriv->command5_bits &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
+       devpriv->cmd5 &= ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
 
        return 0;
 }
@@ -1660,10 +1650,10 @@ static void write_caldac(struct comedi_device *dev, unsigned int channel,
        devpriv->caldac[channel] = value;
 
        /*  clear caldac load bit and make sure we don't write to eeprom */
-       devpriv->command5_bits &=
+       devpriv->cmd5 &=
            ~CALDAC_LOAD_BIT & ~EEPROM_EN_BIT & ~EEPROM_WRITE_UNPROTECT_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
 
        /*  write 4 bit channel */
        labpc_serial_out(dev, channel, 4);
@@ -1671,12 +1661,12 @@ static void write_caldac(struct comedi_device *dev, unsigned int channel,
        labpc_serial_out(dev, value, 8);
 
        /*  set and clear caldac bit to load caldac value */
-       devpriv->command5_bits |= CALDAC_LOAD_BIT;
+       devpriv->cmd5 |= CALDAC_LOAD_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
-       devpriv->command5_bits &= ~CALDAC_LOAD_BIT;
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
+       devpriv->cmd5 &= ~CALDAC_LOAD_BIT;
        udelay(1);
-       devpriv->write_byte(devpriv->command5_bits, dev->iobase + COMMAND5_REG);
+       devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
 }
 
 static int labpc_calib_write_insn(struct comedi_device *dev,
@@ -1769,15 +1759,13 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
                devpriv->write_byte = labpc_outb;
        }
        /* initialize board's command registers */
-       devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG);
-       devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
-       devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
-       devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
+       devpriv->write_byte(devpriv->cmd1, dev->iobase + COMMAND1_REG);
+       devpriv->write_byte(devpriv->cmd2, dev->iobase + COMMAND2_REG);
+       devpriv->write_byte(devpriv->cmd3, dev->iobase + COMMAND3_REG);
+       devpriv->write_byte(devpriv->cmd4, dev->iobase + COMMAND4_REG);
        if (thisboard->register_layout == labpc_1200_layout) {
-               devpriv->write_byte(devpriv->command5_bits,
-                                   dev->iobase + COMMAND5_REG);
-               devpriv->write_byte(devpriv->command6_bits,
-                                   dev->iobase + COMMAND6_REG);
+               devpriv->write_byte(devpriv->cmd5, dev->iobase + COMMAND5_REG);
+               devpriv->write_byte(devpriv->cmd6, dev->iobase + COMMAND6_REG);
        }
 
        /* grab our IRQ */
index 03280936c8a9cb5eff4ed54ff9bd81dfb1e10a68..5976760cf75578d903a0efeeac2f6fdc7191ad78 100644 (file)
@@ -60,15 +60,15 @@ struct labpc_private {
        /*  software copy of analog output values */
        unsigned int ao_value[NUM_AO_CHAN];
        /*  software copys of bits written to command registers */
-       unsigned int command1_bits;
-       unsigned int command2_bits;
-       unsigned int command3_bits;
-       unsigned int command4_bits;
-       unsigned int command5_bits;
-       unsigned int command6_bits;
+       unsigned int cmd1;
+       unsigned int cmd2;
+       unsigned int cmd3;
+       unsigned int cmd4;
+       unsigned int cmd5;
+       unsigned int cmd6;
        /*  store last read of board status registers */
-       unsigned int status1_bits;
-       unsigned int status2_bits;
+       unsigned int stat1;
+       unsigned int stat2;
        /*
         * value to load into board's counter a0 (conversion pacing) for timed
         * conversions