ab8500_bm: Adds support for Car/Travel Adapters
authorHakan Berg <hakan.berg@stericsson.com>
Fri, 11 Jan 2013 13:12:58 +0000 (13:12 +0000)
committerAnton Vorontsov <anton@enomsg.org>
Wed, 16 Jan 2013 01:44:32 +0000 (17:44 -0800)
The Travel and Carkit adapter should be handled directly by
the charger driver.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
drivers/power/ab8500_charger.c
include/linux/mfd/abx500/ab8500-bm.h

index 126b325cddc99c087098c33e869d1e48ff719a56..a0aeef2d2e051c1abcf5a0a209c8572fbe26a198 100644 (file)
@@ -108,6 +108,18 @@ enum ab8500_charger_link_status {
        USB_STAT_HM_IDGND,
        USB_STAT_RESERVED,
        USB_STAT_NOT_VALID_LINK,
+       USB_STAT_PHY_EN,
+       USB_STAT_SUP_NO_IDGND_VBUS,
+       USB_STAT_SUP_IDGND_VBUS,
+       USB_STAT_CHARGER_LINE_1,
+       USB_STAT_CARKIT_1,
+       USB_STAT_CARKIT_2,
+       USB_STAT_ACA_DOCK_CHARGER,
+       USB_STAT_SAMSUNG_USB_PHY_DIS,
+       USB_STAT_SAMSUNG_USB_PHY_ENA,
+       USB_STAT_SAMSUNG_UART_PHY_DIS,
+       USB_STAT_SAMSUNG_UART_PHY_ENA,
+       USB_STAT_MOTOROLA_USB_PHY_ENA,
 };
 
 enum ab8500_usb_state {
@@ -586,7 +598,7 @@ static int ab8500_charger_detect_chargers(struct ab8500_charger *di)
  * Returns error code in case of failure else 0 on success
  */
 static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
-       enum ab8500_charger_link_status link_status)
+               enum ab8500_charger_link_status link_status)
 {
        int ret = 0;
 
@@ -595,15 +607,19 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
        case USB_STAT_STD_HOST_C_NS:
        case USB_STAT_STD_HOST_C_S:
                dev_dbg(di->dev, "USB Type - Standard host is "
-                       "detected through USB driver\n");
+                               "detected through USB driver\n");
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09;
                break;
        case USB_STAT_HOST_CHG_HS_CHIRP:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+               dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+                               di->max_usb_in_curr);
                break;
        case USB_STAT_HOST_CHG_HS:
        case USB_STAT_ACA_RID_C_HS:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9;
+               dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+                               di->max_usb_in_curr);
                break;
        case USB_STAT_ACA_RID_A:
                /*
@@ -611,6 +627,8 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
                 * can consume (300mA). Closest level is 1100mA
                 */
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P1;
+               dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+                               di->max_usb_in_curr);
                break;
        case USB_STAT_ACA_RID_B:
                /*
@@ -618,34 +636,50 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
                 * 100mA for potential accessory). Closest level is 1300mA
                 */
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3;
+               dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+                               di->max_usb_in_curr);
                break;
-       case USB_STAT_DEDICATED_CHG:
        case USB_STAT_HOST_CHG_NM:
-       case USB_STAT_ACA_RID_C_HS_CHIRP:
+       case USB_STAT_DEDICATED_CHG:
        case USB_STAT_ACA_RID_C_NM:
+       case USB_STAT_ACA_RID_C_HS_CHIRP:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
-               break;
-       case USB_STAT_RESERVED:
-               /*
-                * This state is used to indicate that VBUS has dropped below
-                * the detection level 4 times in a row. This is due to the
-                * charger output current is set to high making the charger
-                * voltage collapse. This have to be propagated through to
-                * chargalg. This is done using the property
-                * POWER_SUPPLY_PROP_CURRENT_AVG = 1
-                */
-               di->flags.vbus_collapse = true;
-               dev_dbg(di->dev, "USB Type - USB_STAT_RESERVED "
-                       "VBUS has collapsed\n");
-               ret = -1;
+               dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+                               di->max_usb_in_curr);
                break;
        case USB_STAT_HM_IDGND:
-       case USB_STAT_NOT_CONFIGURED:
        case USB_STAT_NOT_VALID_LINK:
+       case USB_STAT_NOT_CONFIGURED:
                dev_err(di->dev, "USB Type - Charging not allowed\n");
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
                ret = -ENXIO;
                break;
+       case USB_STAT_RESERVED:
+               if (is_ab8500(di->parent)) {
+                       di->flags.vbus_collapse = true;
+                       dev_err(di->dev, "USB Type - USB_STAT_RESERVED "
+                                               "VBUS has collapsed\n");
+                       ret = -ENXIO;
+                       break;
+               }
+               if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+                       dev_dbg(di->dev, "USB Type - Charging not allowed\n");
+                       di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+                       dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
+                                       link_status, di->max_usb_in_curr);
+                       ret = -ENXIO;
+                       break;
+               }
+               break;
+       case USB_STAT_CARKIT_1:
+       case USB_STAT_CARKIT_2:
+       case USB_STAT_ACA_DOCK_CHARGER:
+       case USB_STAT_CHARGER_LINE_1:
+               di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+               dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+                               di->max_usb_in_curr);
+               break;
+
        default:
                dev_err(di->dev, "USB Type - Unknown\n");
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
@@ -677,8 +711,14 @@ static int ab8500_charger_read_usb_type(struct ab8500_charger *di)
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return ret;
        }
-       ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
-               AB8500_USB_LINE_STAT_REG, &val);
+       if (is_ab8500(di->parent)) {
+               ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+                               AB8500_USB_LINE_STAT_REG, &val);
+       } else {
+               if (is_ab9540(di->parent) || is_ab8505(di->parent))
+                       ret = abx500_get_register_interruptible(di->dev,
+                               AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
+       }
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return ret;
@@ -718,8 +758,13 @@ static int ab8500_charger_detect_usb_type(struct ab8500_charger *di)
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return ret;
                }
-               ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
-                       AB8500_USB_LINE_STAT_REG, &val);
+
+               if (is_ab8500(di->parent))
+                       ret = abx500_get_register_interruptible(di->dev,
+                               AB8500_USB, AB8500_USB_LINE_STAT_REG, &val);
+               else
+                       ret = abx500_get_register_interruptible(di->dev,
+                               AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
                if (ret < 0) {
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return ret;
@@ -2944,7 +2989,6 @@ static int ab8500_charger_probe(struct platform_device *pdev)
        }
 
        if (charger_status & USB_PW_CONN) {
-               dev_dbg(di->dev, "VBUS Detect during startup\n");
                di->vbus_detected = true;
                di->vbus_detected_start = true;
                queue_work(di->charger_wq,
index fac684a6f346d1e4f472a4209a22bff2f551882f..e2a1e6d84f728821f5b9214f6e039fcf717fd400 100644 (file)
@@ -23,6 +23,7 @@
  * Bank : 0x5
  */
 #define AB8500_USB_LINE_STAT_REG       0x80
+#define AB8500_USB_LINK1_STAT_REG      0x94
 
 /*
  * Charger / status register offfsets