[POWERPC] Remove redundant pci_read_irq_line() function for 85xx platform
authorRoy Zang <tie-fei.zang@freescale.com>
Fri, 1 Jun 2007 08:05:38 +0000 (16:05 +0800)
committerKumar Gala <galak@kernel.crashing.org>
Tue, 10 Jul 2007 04:24:50 +0000 (23:24 -0500)
Remove redundant pci_read_irq_line() function for 85xx CDS board.
This function has been realized in common ppc pci code.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/platforms/85xx/mpc85xx_cds.c

index 2a80c1d0afbcfb863b1852a29cba21b344f5878c..50c8d6458362276a825df8510144df1b784b34f0 100644 (file)
@@ -69,52 +69,44 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
                return PCIBIOS_SUCCESSFUL;
 }
 
-static void __init mpc85xx_cds_pcibios_fixup(void)
+static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev)
 {
-       struct pci_dev *dev;
-       u_char          c;
-
-       if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-                                       PCI_DEVICE_ID_VIA_82C586_1, NULL))) {
+       u_char c;
+       if (dev->vendor == PCI_VENDOR_ID_VIA) {
+               switch (dev->device) {
+               case PCI_DEVICE_ID_VIA_82C586_1:
+                       /*
+                        * U-Boot does not set the enable bits
+                        * for the IDE device. Force them on here.
+                        */
+                       pci_read_config_byte(dev, 0x40, &c);
+                       c |= 0x03; /* IDE: Chip Enable Bits */
+                       pci_write_config_byte(dev, 0x40, c);
+
+                       /*
+                        * Since only primary interface works, force the
+                        * IDE function to standard primary IDE interrupt
+                        * w/ 8259 offset
+                        */
+                       dev->irq = 14;
+                       pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+                       break;
                /*
-                * U-Boot does not set the enable bits
-                * for the IDE device. Force them on here.
+                * Force legacy USB interrupt routing
                 */
-               pci_read_config_byte(dev, 0x40, &c);
-               c |= 0x03; /* IDE: Chip Enable Bits */
-               pci_write_config_byte(dev, 0x40, c);
-
-               /*
-                * Since only primary interface works, force the
-                * IDE function to standard primary IDE interrupt
-                * w/ 8259 offset
+               case PCI_DEVICE_ID_VIA_82C586_2:
+               /* There are two USB controllers.
+                * Identify them by functon number
                 */
-               dev->irq = 14;
-               pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-               pci_dev_put(dev);
-       }
-
-       /*
-        * Force legacy USB interrupt routing
-        */
-       if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-                                       PCI_DEVICE_ID_VIA_82C586_2, NULL))) {
-               dev->irq = 10;
-               pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10);
-               pci_dev_put(dev);
-       }
-
-       if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-                                       PCI_DEVICE_ID_VIA_82C586_2, dev))) {
-               dev->irq = 11;
-               pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
-               pci_dev_put(dev);
+                       if (PCI_FUNC(dev->devfn))
+                               dev->irq = 11;
+                       else
+                               dev->irq = 10;
+                       pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+               default:
+                       break;
+               }
        }
-
-       /* Now map all the PCI irqs */
-       dev = NULL;
-       for_each_pci_dev(dev)
-               pci_read_irq_line(dev);
 }
 
 #ifdef CONFIG_PPC_I8259
@@ -229,7 +221,7 @@ static void __init mpc85xx_cds_setup_arch(void)
        for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
                mpc85xx_add_bridge(np);
 
-       ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
+       ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup;
        ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 }