phy: Add driver for Exynos DP PHY

Add a PHY provider driver for the Samsung Exynos SoC Display Port PHY.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
index 5ff208c7f1f200d0e5371bc1d1ba685fcc5d170c..c0fccaa1671ec8da7e403d0a8478860da3e586ba 100644 (file)
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -12,3 +12,11 @@ the PHY specifier identifies the PHY and its meaning is as follows:
   1 - MIPI DSIM 0,
   2 - MIPI CSIS 1,
   3 - MIPI DSIM 1.
+
+Samsung EXYNOS SoC series Display Port PHY
+-------------------------------------------------
+
+Required properties:
+- compatible : should be "samsung,exynos5250-dp-video-phy";
+- reg : offset and length of the Display Port PHY register set;
+- #phy-cells : from the generic PHY bindings, must be 0;

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 0062d7e60dbe6960e343e88adf24bac8d314f056..a344f3d52361f0eed4d2a0d1fdc81a957e3a7967 100644 (file)
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -44,4 +44,11 @@ config TWL4030_USB
          This transceiver supports high and full speed devices plus,
          in host mode, low speed.
 
+config PHY_EXYNOS_DP_VIDEO
+       tristate "EXYNOS SoC series Display Port PHY driver"
+       depends on OF
+       select GENERIC_PHY
+       help
+         Support for Display Port PHY found on Samsung EXYNOS SoCs.
+
 endmenu

diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 6344053661f4a75612f8bd1b5fa96b7a44f06c04..d0caae9cfb830f8956665ba6ce83f6d4e938c814 100644 (file)
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_GENERIC_PHY)              += phy-core.o
+obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)      += phy-exynos-dp-video.o
 obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)    += phy-exynos-mipi-video.o
 obj-$(CONFIG_OMAP_USB2)                        += phy-omap-usb2.o
 obj-$(CONFIG_TWL4030_USB)              += phy-twl4030-usb.o

diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
new file mode 100644 (file)
index 0000000..1dbe6ce
--- /dev/null
+++ b/drivers/phy/phy-exynos-dp-video.c
@@ -0,0 +1,111 @@
+/*
+ * Samsung EXYNOS SoC series Display Port PHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* DPTX_PHY_CONTROL register */
+#define EXYNOS_DPTX_PHY_ENABLE         (1 << 0)
+
+struct exynos_dp_video_phy {
+       void __iomem *regs;
+};
+
+static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on)
+{
+       u32 reg;
+
+       reg = readl(state->regs);
+       if (on)
+               reg |= EXYNOS_DPTX_PHY_ENABLE;
+       else
+               reg &= ~EXYNOS_DPTX_PHY_ENABLE;
+       writel(reg, state->regs);
+
+       return 0;
+}
+
+static int exynos_dp_video_phy_power_on(struct phy *phy)
+{
+       struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
+
+       return __set_phy_state(state, 1);
+}
+
+static int exynos_dp_video_phy_power_off(struct phy *phy)
+{
+       struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
+
+       return __set_phy_state(state, 0);
+}
+
+static struct phy_ops exynos_dp_video_phy_ops = {
+       .power_on       = exynos_dp_video_phy_power_on,
+       .power_off      = exynos_dp_video_phy_power_off,
+       .owner          = THIS_MODULE,
+};
+
+static int exynos_dp_video_phy_probe(struct platform_device *pdev)
+{
+       struct exynos_dp_video_phy *state;
+       struct device *dev = &pdev->dev;
+       struct resource *res;
+       struct phy_provider *phy_provider;
+       struct phy *phy;
+
+       state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+       if (!state)
+               return -ENOMEM;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+       state->regs = devm_ioremap_resource(dev, res);
+       if (IS_ERR(state->regs))
+               return PTR_ERR(state->regs);
+
+       phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+       if (IS_ERR(phy_provider))
+               return PTR_ERR(phy_provider);
+
+       phy = devm_phy_create(dev, &exynos_dp_video_phy_ops, NULL);
+       if (IS_ERR(phy)) {
+               dev_err(dev, "failed to create Display Port PHY\n");
+               return PTR_ERR(phy);
+       }
+       phy_set_drvdata(phy, state);
+
+       return 0;
+}
+
+static const struct of_device_id exynos_dp_video_phy_of_match[] = {
+       { .compatible = "samsung,exynos5250-dp-video-phy" },
+       { },
+};
+MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match);
+
+static struct platform_driver exynos_dp_video_phy_driver = {
+       .probe  = exynos_dp_video_phy_probe,
+       .driver = {
+               .name   = "exynos-dp-video-phy",
+               .owner  = THIS_MODULE,
+               .of_match_table = exynos_dp_video_phy_of_match,
+       }
+};
+module_platform_driver(exynos_dp_video_phy_driver);
+
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver");
+MODULE_LICENSE("GPL v2");