return retval;
}
+static void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv)
+{
+ /* Fix USB interface interference issue */
+ rtl8xxxu_write8(priv, 0xfe40, 0xe0);
+ rtl8xxxu_write8(priv, 0xfe41, 0x8d);
+ rtl8xxxu_write8(priv, 0xfe42, 0x80);
+ /*
+ * This sets TXDMA_OFFSET_DROP_DATA_EN (bit 9) as well as bits
+ * 8 and 5, for which I have found no documentation.
+ */
+ rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, 0xfd0320);
+
+ /*
+ * Solve too many protocol error on USB bus.
+ * Can't do this for 8188/8192 UMC A cut parts
+ */
+ if (!(!priv->chip_cut && priv->vendor_umc)) {
+ rtl8xxxu_write8(priv, 0xfe40, 0xe6);
+ rtl8xxxu_write8(priv, 0xfe41, 0x94);
+ rtl8xxxu_write8(priv, 0xfe42, 0x80);
+
+ rtl8xxxu_write8(priv, 0xfe40, 0xe0);
+ rtl8xxxu_write8(priv, 0xfe41, 0x19);
+ rtl8xxxu_write8(priv, 0xfe42, 0x80);
+
+ rtl8xxxu_write8(priv, 0xfe40, 0xe5);
+ rtl8xxxu_write8(priv, 0xfe41, 0x91);
+ rtl8xxxu_write8(priv, 0xfe42, 0x80);
+
+ rtl8xxxu_write8(priv, 0xfe40, 0xe2);
+ rtl8xxxu_write8(priv, 0xfe41, 0x81);
+ rtl8xxxu_write8(priv, 0xfe42, 0x80);
+ }
+}
+
+static void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv)
+{
+ u32 val32;
+
+ val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK);
+ val32 |= TXDMA_OFFSET_DROP_DATA_EN;
+ rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32);
+}
+
static int rtl8723au_power_on(struct rtl8xxxu_priv *priv)
{
u8 val8;
if (ret)
goto exit;
- /* Solve too many protocol error on USB bus */
- /* Can't do this for 8188/8192 UMC A cut parts */
- if (priv->rtl_chip == RTL8723A ||
- ((priv->rtl_chip == RTL8192C || priv->rtl_chip == RTL8191C ||
- priv->rtl_chip == RTL8188C) &&
- (priv->chip_cut || !priv->vendor_umc))) {
- rtl8xxxu_write8(priv, 0xfe40, 0xe6);
- rtl8xxxu_write8(priv, 0xfe41, 0x94);
- rtl8xxxu_write8(priv, 0xfe42, 0x80);
-
- rtl8xxxu_write8(priv, 0xfe40, 0xe0);
- rtl8xxxu_write8(priv, 0xfe41, 0x19);
- rtl8xxxu_write8(priv, 0xfe42, 0x80);
-
- rtl8xxxu_write8(priv, 0xfe40, 0xe5);
- rtl8xxxu_write8(priv, 0xfe41, 0x91);
- rtl8xxxu_write8(priv, 0xfe42, 0x80);
-
- rtl8xxxu_write8(priv, 0xfe40, 0xe2);
- rtl8xxxu_write8(priv, 0xfe41, 0x81);
- rtl8xxxu_write8(priv, 0xfe42, 0x80);
- }
-
if (priv->fops->phy_init_antenna_selection)
priv->fops->phy_init_antenna_selection(priv);
case RTL8723A:
rftable = rtl8723au_radioa_1t_init_table;
ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
+
+ /* Reduce 80M spur */
+ rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d);
+ rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
+ rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82);
+ rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
break;
case RTL8723B:
rftable = rtl8723bu_radioa_1t_init_table;
/*
* Chip specific quirks
*/
- if (priv->rtl_chip == RTL8723A) {
- /* Fix USB interface interference issue */
- rtl8xxxu_write8(priv, 0xfe40, 0xe0);
- rtl8xxxu_write8(priv, 0xfe41, 0x8d);
- rtl8xxxu_write8(priv, 0xfe42, 0x80);
- rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, 0xfd0320);
-
- /* Reduce 80M spur */
- rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d);
- rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
- rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82);
- rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
- } else {
- val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK);
- val32 |= TXDMA_OFFSET_DROP_DATA_EN;
- rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32);
- }
+ priv->fops->usb_quirks(priv);
/*
* Presumably this is for 8188EU as well
.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
.enable_rf = rtl8723a_enable_rf,
.disable_rf = rtl8723a_disable_rf,
+ .usb_quirks = rtl8xxxu_gen1_usb_quirks,
.set_tx_power = rtl8723a_set_tx_power,
.update_rate_mask = rtl8723au_update_rate_mask,
.report_connect = rtl8723au_report_connect,
.init_statistics = rtl8723bu_init_statistics,
.enable_rf = rtl8723b_enable_rf,
.disable_rf = rtl8723b_disable_rf,
+ .usb_quirks = rtl8xxxu_gen2_usb_quirks,
.set_tx_power = rtl8723b_set_tx_power,
.update_rate_mask = rtl8723bu_update_rate_mask,
.report_connect = rtl8723bu_report_connect,
.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
.enable_rf = rtl8723a_enable_rf,
.disable_rf = rtl8723a_disable_rf,
+ .usb_quirks = rtl8xxxu_gen1_usb_quirks,
.set_tx_power = rtl8723a_set_tx_power,
.update_rate_mask = rtl8723au_update_rate_mask,
.report_connect = rtl8723au_report_connect,
.parse_rx_desc = rtl8xxxu_parse_rxdesc24,
.enable_rf = rtl8723b_enable_rf,
.disable_rf = rtl8723b_disable_rf,
+ .usb_quirks = rtl8xxxu_gen2_usb_quirks,
.set_tx_power = rtl8192e_set_tx_power,
.update_rate_mask = rtl8723bu_update_rate_mask,
.report_connect = rtl8723bu_report_connect,