Move usbvideo to staging and mark it deprecated.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
source "drivers/media/video/usbvision/Kconfig"
-source "drivers/media/video/usbvideo/Kconfig"
-
source "drivers/media/video/et61x251/Kconfig"
config USB_SE401
obj-$(CONFIG_VIDEO_HDPVR) += hdpvr/
-obj-$(CONFIG_USB_IBMCAM) += usbvideo/
-obj-$(CONFIG_USB_KONICAWC) += usbvideo/
-obj-$(CONFIG_USB_VICAM) += usbvideo/
-obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/
obj-$(CONFIG_USB_S2255) += s2255drv.o
obj-$(CONFIG_VIDEO_IVTV) += ivtv/
+++ /dev/null
-config VIDEO_USBVIDEO
- tristate
-
-config USB_VICAM
- tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
- depends on VIDEO_V4L1 && EXPERIMENTAL
- select VIDEO_USBVIDEO
- ---help---
- Say Y here if you have 3com homeconnect camera (vicam).
-
- To compile this driver as a module, choose M here: the
- module will be called vicam.
+++ /dev/null
-obj-$(CONFIG_VIDEO_USBVIDEO) += usbvideo.o
-obj-$(CONFIG_USB_VICAM) += vicam.o
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <asm/io.h>
-
-#include "usbvideo.h"
-
-#if defined(MAP_NR)
-#define virt_to_page(v) MAP_NR(v) /* Kernels 2.2.x */
-#endif
-
-static int video_nr = -1;
-module_param(video_nr, int, 0);
-
-/*
- * Local prototypes.
- */
-static void usbvideo_Disconnect(struct usb_interface *intf);
-static void usbvideo_CameraRelease(struct uvd *uvd);
-
-static long usbvideo_v4l_ioctl(struct file *file,
- unsigned int cmd, unsigned long arg);
-static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma);
-static int usbvideo_v4l_open(struct file *file);
-static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos);
-static int usbvideo_v4l_close(struct file *file);
-
-static int usbvideo_StartDataPump(struct uvd *uvd);
-static void usbvideo_StopDataPump(struct uvd *uvd);
-static int usbvideo_GetFrame(struct uvd *uvd, int frameNum);
-static int usbvideo_NewFrame(struct uvd *uvd, int framenum);
-static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
- struct usbvideo_frame *frame);
-
-/*******************************/
-/* Memory management functions */
-/*******************************/
-static void *usbvideo_rvmalloc(unsigned long size)
-{
- void *mem;
- unsigned long adr;
-
- size = PAGE_ALIGN(size);
- mem = vmalloc_32(size);
- if (!mem)
- return NULL;
-
- memset(mem, 0, size); /* Clear the ram out, no junk to the user */
- adr = (unsigned long) mem;
- while (size > 0) {
- SetPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
-
- return mem;
-}
-
-static void usbvideo_rvfree(void *mem, unsigned long size)
-{
- unsigned long adr;
-
- if (!mem)
- return;
-
- adr = (unsigned long) mem;
- while ((long) size > 0) {
- ClearPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
- vfree(mem);
-}
-
-static void RingQueue_Initialize(struct RingQueue *rq)
-{
- assert(rq != NULL);
- init_waitqueue_head(&rq->wqh);
-}
-
-static void RingQueue_Allocate(struct RingQueue *rq, int rqLen)
-{
- /* Make sure the requested size is a power of 2 and
- round up if necessary. This allows index wrapping
- using masks rather than modulo */
-
- int i = 1;
- assert(rq != NULL);
- assert(rqLen > 0);
-
- while(rqLen >> i)
- i++;
- if(rqLen != 1 << (i-1))
- rqLen = 1 << i;
-
- rq->length = rqLen;
- rq->ri = rq->wi = 0;
- rq->queue = usbvideo_rvmalloc(rq->length);
- assert(rq->queue != NULL);
-}
-
-static int RingQueue_IsAllocated(const struct RingQueue *rq)
-{
- if (rq == NULL)
- return 0;
- return (rq->queue != NULL) && (rq->length > 0);
-}
-
-static void RingQueue_Free(struct RingQueue *rq)
-{
- assert(rq != NULL);
- if (RingQueue_IsAllocated(rq)) {
- usbvideo_rvfree(rq->queue, rq->length);
- rq->queue = NULL;
- rq->length = 0;
- }
-}
-
-int RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len)
-{
- int rql, toread;
-
- assert(rq != NULL);
- assert(dst != NULL);
-
- rql = RingQueue_GetLength(rq);
- if(!rql)
- return 0;
-
- /* Clip requested length to available data */
- if(len > rql)
- len = rql;
-
- toread = len;
- if(rq->ri > rq->wi) {
- /* Read data from tail */
- int read = (toread < (rq->length - rq->ri)) ? toread : rq->length - rq->ri;
- memcpy(dst, rq->queue + rq->ri, read);
- toread -= read;
- dst += read;
- rq->ri = (rq->ri + read) & (rq->length-1);
- }
- if(toread) {
- /* Read data from head */
- memcpy(dst, rq->queue + rq->ri, toread);
- rq->ri = (rq->ri + toread) & (rq->length-1);
- }
- return len;
-}
-
-EXPORT_SYMBOL(RingQueue_Dequeue);
-
-int RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n)
-{
- int enqueued = 0;
-
- assert(rq != NULL);
- assert(cdata != NULL);
- assert(rq->length > 0);
- while (n > 0) {
- int m, q_avail;
-
- /* Calculate the largest chunk that fits the tail of the ring */
- q_avail = rq->length - rq->wi;
- if (q_avail <= 0) {
- rq->wi = 0;
- q_avail = rq->length;
- }
- m = n;
- assert(q_avail > 0);
- if (m > q_avail)
- m = q_avail;
-
- memcpy(rq->queue + rq->wi, cdata, m);
- RING_QUEUE_ADVANCE_INDEX(rq, wi, m);
- cdata += m;
- enqueued += m;
- n -= m;
- }
- return enqueued;
-}
-
-EXPORT_SYMBOL(RingQueue_Enqueue);
-
-static void RingQueue_InterruptibleSleepOn(struct RingQueue *rq)
-{
- assert(rq != NULL);
- interruptible_sleep_on(&rq->wqh);
-}
-
-void RingQueue_WakeUpInterruptible(struct RingQueue *rq)
-{
- assert(rq != NULL);
- if (waitqueue_active(&rq->wqh))
- wake_up_interruptible(&rq->wqh);
-}
-
-EXPORT_SYMBOL(RingQueue_WakeUpInterruptible);
-
-void RingQueue_Flush(struct RingQueue *rq)
-{
- assert(rq != NULL);
- rq->ri = 0;
- rq->wi = 0;
-}
-
-EXPORT_SYMBOL(RingQueue_Flush);
-
-
-/*
- * usbvideo_VideosizeToString()
- *
- * This procedure converts given videosize value to readable string.
- *
- * History:
- * 07-Aug-2000 Created.
- * 19-Oct-2000 Reworked for usbvideo module.
- */
-static void usbvideo_VideosizeToString(char *buf, int bufLen, videosize_t vs)
-{
- char tmp[40];
- int n;
-
- n = 1 + sprintf(tmp, "%ldx%ld", VIDEOSIZE_X(vs), VIDEOSIZE_Y(vs));
- assert(n < sizeof(tmp));
- if ((buf == NULL) || (bufLen < n))
- err("usbvideo_VideosizeToString: buffer is too small.");
- else
- memmove(buf, tmp, n);
-}
-
-/*
- * usbvideo_OverlayChar()
- *
- * History:
- * 01-Feb-2000 Created.
- */
-static void usbvideo_OverlayChar(struct uvd *uvd, struct usbvideo_frame *frame,
- int x, int y, int ch)
-{
- static const unsigned short digits[16] = {
- 0xF6DE, /* 0 */
- 0x2492, /* 1 */
- 0xE7CE, /* 2 */
- 0xE79E, /* 3 */
- 0xB792, /* 4 */
- 0xF39E, /* 5 */
- 0xF3DE, /* 6 */
- 0xF492, /* 7 */
- 0xF7DE, /* 8 */
- 0xF79E, /* 9 */
- 0x77DA, /* a */
- 0xD75C, /* b */
- 0xF24E, /* c */
- 0xD6DC, /* d */
- 0xF34E, /* e */
- 0xF348 /* f */
- };
- unsigned short digit;
- int ix, iy;
- int value;
-
- if ((uvd == NULL) || (frame == NULL))
- return;
-
- value = hex_to_bin(ch);
- if (value < 0)
- return;
- digit = digits[value];
-
- for (iy=0; iy < 5; iy++) {
- for (ix=0; ix < 3; ix++) {
- if (digit & 0x8000) {
- if (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24)) {
-/* TODO */ RGB24_PUTPIXEL(frame, x+ix, y+iy, 0xFF, 0xFF, 0xFF);
- }
- }
- digit = digit << 1;
- }
- }
-}
-
-/*
- * usbvideo_OverlayString()
- *
- * History:
- * 01-Feb-2000 Created.
- */
-static void usbvideo_OverlayString(struct uvd *uvd, struct usbvideo_frame *frame,
- int x, int y, const char *str)
-{
- while (*str) {
- usbvideo_OverlayChar(uvd, frame, x, y, *str);
- str++;
- x += 4; /* 3 pixels character + 1 space */
- }
-}
-
-/*
- * usbvideo_OverlayStats()
- *
- * Overlays important debugging information.
- *
- * History:
- * 01-Feb-2000 Created.
- */
-static void usbvideo_OverlayStats(struct uvd *uvd, struct usbvideo_frame *frame)
-{
- const int y_diff = 8;
- char tmp[16];
- int x = 10, y=10;
- long i, j, barLength;
- const int qi_x1 = 60, qi_y1 = 10;
- const int qi_x2 = VIDEOSIZE_X(frame->request) - 10, qi_h = 10;
-
- /* Call the user callback, see if we may proceed after that */
- if (VALID_CALLBACK(uvd, overlayHook)) {
- if (GET_CALLBACK(uvd, overlayHook)(uvd, frame) < 0)
- return;
- }
-
- /*
- * We draw a (mostly) hollow rectangle with qi_xxx coordinates.
- * Left edge symbolizes the queue index 0; right edge symbolizes
- * the full capacity of the queue.
- */
- barLength = qi_x2 - qi_x1 - 2;
- if ((barLength > 10) && (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24))) {
-/* TODO */ long u_lo, u_hi, q_used;
- long m_ri, m_wi, m_lo, m_hi;
-
- /*
- * Determine fill zones (used areas of the queue):
- * 0 xxxxxxx u_lo ...... uvd->dp.ri xxxxxxxx u_hi ..... uvd->dp.length
- *
- * if u_lo < 0 then there is no first filler.
- */
-
- q_used = RingQueue_GetLength(&uvd->dp);
- if ((uvd->dp.ri + q_used) >= uvd->dp.length) {
- u_hi = uvd->dp.length;
- u_lo = (q_used + uvd->dp.ri) & (uvd->dp.length-1);
- } else {
- u_hi = (q_used + uvd->dp.ri);
- u_lo = -1;
- }
-
- /* Convert byte indices into screen units */
- m_ri = qi_x1 + ((barLength * uvd->dp.ri) / uvd->dp.length);
- m_wi = qi_x1 + ((barLength * uvd->dp.wi) / uvd->dp.length);
- m_lo = (u_lo > 0) ? (qi_x1 + ((barLength * u_lo) / uvd->dp.length)) : -1;
- m_hi = qi_x1 + ((barLength * u_hi) / uvd->dp.length);
-
- for (j=qi_y1; j < (qi_y1 + qi_h); j++) {
- for (i=qi_x1; i < qi_x2; i++) {
- /* Draw border lines */
- if ((j == qi_y1) || (j == (qi_y1 + qi_h - 1)) ||
- (i == qi_x1) || (i == (qi_x2 - 1))) {
- RGB24_PUTPIXEL(frame, i, j, 0xFF, 0xFF, 0xFF);
- continue;
- }
- /* For all other points the Y coordinate does not matter */
- if ((i >= m_ri) && (i <= (m_ri + 3))) {
- RGB24_PUTPIXEL(frame, i, j, 0x00, 0xFF, 0x00);
- } else if ((i >= m_wi) && (i <= (m_wi + 3))) {
- RGB24_PUTPIXEL(frame, i, j, 0xFF, 0x00, 0x00);
- } else if ((i < m_lo) || ((i > m_ri) && (i < m_hi)))
- RGB24_PUTPIXEL(frame, i, j, 0x00, 0x00, 0xFF);
- }
- }
- }
-
- sprintf(tmp, "%8lx", uvd->stats.frame_num);
- usbvideo_OverlayString(uvd, frame, x, y, tmp);
- y += y_diff;
-
- sprintf(tmp, "%8lx", uvd->stats.urb_count);
- usbvideo_OverlayString(uvd, frame, x, y, tmp);
- y += y_diff;
-
- sprintf(tmp, "%8lx", uvd->stats.urb_length);
- usbvideo_OverlayString(uvd, frame, x, y, tmp);
- y += y_diff;
-
- sprintf(tmp, "%8lx", uvd->stats.data_count);
- usbvideo_OverlayString(uvd, frame, x, y, tmp);
- y += y_diff;
-
- sprintf(tmp, "%8lx", uvd->stats.header_count);
- usbvideo_OverlayString(uvd, frame, x, y, tmp);
- y += y_diff;
-
- sprintf(tmp, "%8lx", uvd->stats.iso_skip_count);
- usbvideo_OverlayString(uvd, frame, x, y, tmp);
- y += y_diff;
-
- sprintf(tmp, "%8lx", uvd->stats.iso_err_count);
- usbvideo_OverlayString(uvd, frame, x, y, tmp);
- y += y_diff;
-
- sprintf(tmp, "%8x", uvd->vpic.colour);
- usbvideo_OverlayString(uvd, frame, x, y, tmp);
- y += y_diff;
-
- sprintf(tmp, "%8x", uvd->vpic.hue);
- usbvideo_OverlayString(uvd, frame, x, y, tmp);
- y += y_diff;
-
- sprintf(tmp, "%8x", uvd->vpic.brightness >> 8);
- usbvideo_OverlayString(uvd, frame, x, y, tmp);
- y += y_diff;
-
- sprintf(tmp, "%8x", uvd->vpic.contrast >> 12);
- usbvideo_OverlayString(uvd, frame, x, y, tmp);
- y += y_diff;
-
- sprintf(tmp, "%8d", uvd->vpic.whiteness >> 8);
- usbvideo_OverlayString(uvd, frame, x, y, tmp);
- y += y_diff;
-}
-
-/*
- * usbvideo_ReportStatistics()
- *
- * This procedure prints packet and transfer statistics.
- *
- * History:
- * 14-Jan-2000 Corrected default multiplier.
- */
-static void usbvideo_ReportStatistics(const struct uvd *uvd)
-{
- if ((uvd != NULL) && (uvd->stats.urb_count > 0)) {
- unsigned long allPackets, badPackets, goodPackets, percent;
- allPackets = uvd->stats.urb_count * CAMERA_URB_FRAMES;
- badPackets = uvd->stats.iso_skip_count + uvd->stats.iso_err_count;
- goodPackets = allPackets - badPackets;
- /* Calculate percentage wisely, remember integer limits */
- assert(allPackets != 0);
- if (goodPackets < (((unsigned long)-1)/100))
- percent = (100 * goodPackets) / allPackets;
- else
- percent = goodPackets / (allPackets / 100);
- dev_info(&uvd->dev->dev,
- "Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%\n",
- allPackets, badPackets, percent);
- if (uvd->iso_packet_len > 0) {
- unsigned long allBytes, xferBytes;
- char multiplier = ' ';
- allBytes = allPackets * uvd->iso_packet_len;
- xferBytes = uvd->stats.data_count;
- assert(allBytes != 0);
- if (xferBytes < (((unsigned long)-1)/100))
- percent = (100 * xferBytes) / allBytes;
- else
- percent = xferBytes / (allBytes / 100);
- /* Scale xferBytes for easy reading */
- if (xferBytes > 10*1024) {
- xferBytes /= 1024;
- multiplier = 'K';
- if (xferBytes > 10*1024) {
- xferBytes /= 1024;
- multiplier = 'M';
- if (xferBytes > 10*1024) {
- xferBytes /= 1024;
- multiplier = 'G';
- if (xferBytes > 10*1024) {
- xferBytes /= 1024;
- multiplier = 'T';
- }
- }
- }
- }
- dev_info(&uvd->dev->dev,
- "Transfer Statistics: Transferred=%lu%cB Usage=%lu%%\n",
- xferBytes, multiplier, percent);
- }
- }
-}
-
-/*
- * usbvideo_TestPattern()
- *
- * Procedure forms a test pattern (yellow grid on blue background).
- *
- * Parameters:
- * fullframe: if TRUE then entire frame is filled, otherwise the procedure
- * continues from the current scanline.
- * pmode 0: fill the frame with solid blue color (like on VCR or TV)
- * 1: Draw a colored grid
- *
- * History:
- * 01-Feb-2000 Created.
- */
-void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode)
-{
- struct usbvideo_frame *frame;
- int num_cell = 0;
- int scan_length = 0;
- static int num_pass;
-
- if (uvd == NULL) {
- err("%s: uvd == NULL", __func__);
- return;
- }
- if ((uvd->curframe < 0) || (uvd->curframe >= USBVIDEO_NUMFRAMES)) {
- err("%s: uvd->curframe=%d.", __func__, uvd->curframe);
- return;
- }
-
- /* Grab the current frame */
- frame = &uvd->frame[uvd->curframe];
-
- /* Optionally start at the beginning */
- if (fullframe) {
- frame->curline = 0;
- frame->seqRead_Length = 0;
- }
-#if 0
- { /* For debugging purposes only */
- char tmp[20];
- usbvideo_VideosizeToString(tmp, sizeof(tmp), frame->request);
- dev_info(&uvd->dev->dev, "testpattern: frame=%s\n", tmp);
- }
-#endif
- /* Form every scan line */
- for (; frame->curline < VIDEOSIZE_Y(frame->request); frame->curline++) {
- int i;
- unsigned char *f = frame->data +
- (VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL * frame->curline);
- for (i=0; i < VIDEOSIZE_X(frame->request); i++) {
- unsigned char cb=0x80;
- unsigned char cg = 0;
- unsigned char cr = 0;
-
- if (pmode == 1) {
- if (frame->curline % 32 == 0)
- cb = 0, cg = cr = 0xFF;
- else if (i % 32 == 0) {
- if (frame->curline % 32 == 1)
- num_cell++;
- cb = 0, cg = cr = 0xFF;
- } else {
- cb = ((num_cell*7) + num_pass) & 0xFF;
- cg = ((num_cell*5) + num_pass*2) & 0xFF;
- cr = ((num_cell*3) + num_pass*3) & 0xFF;
- }
- } else {
- /* Just the blue screen */
- }
-
- *f++ = cb;
- *f++ = cg;
- *f++ = cr;
- scan_length += 3;
- }
- }
-
- frame->frameState = FrameState_Done;
- frame->seqRead_Length += scan_length;
- ++num_pass;
-
- /* We do this unconditionally, regardless of FLAGS_OVERLAY_STATS */
- usbvideo_OverlayStats(uvd, frame);
-}
-
-EXPORT_SYMBOL(usbvideo_TestPattern);
-
-
-#ifdef DEBUG
-/*
- * usbvideo_HexDump()
- *
- * A debugging tool. Prints hex dumps.
- *
- * History:
- * 29-Jul-2000 Added printing of offsets.
- */
-void usbvideo_HexDump(const unsigned char *data, int len)
-{
- const int bytes_per_line = 32;
- char tmp[128]; /* 32*3 + 5 */
- int i, k;
-
- for (i=k=0; len > 0; i++, len--) {
- if (i > 0 && ((i % bytes_per_line) == 0)) {
- printk("%s\n", tmp);
- k=0;
- }
- if ((i % bytes_per_line) == 0)
- k += sprintf(&tmp[k], "%04x: ", i);
- k += sprintf(&tmp[k], "%02x ", data[i]);
- }
- if (k > 0)
- printk("%s\n", tmp);
-}
-
-EXPORT_SYMBOL(usbvideo_HexDump);
-
-#endif
-
-/* ******************************************************************** */
-
-/* XXX: this piece of crap really wants some error handling.. */
-static int usbvideo_ClientIncModCount(struct uvd *uvd)
-{
- if (uvd == NULL) {
- err("%s: uvd == NULL", __func__);
- return -EINVAL;
- }
- if (uvd->handle == NULL) {
- err("%s: uvd->handle == NULL", __func__);
- return -EINVAL;
- }
- if (!try_module_get(uvd->handle->md_module)) {
- err("%s: try_module_get() == 0", __func__);
- return -ENODEV;
- }
- return 0;
-}
-
-static void usbvideo_ClientDecModCount(struct uvd *uvd)
-{
- if (uvd == NULL) {
- err("%s: uvd == NULL", __func__);
- return;
- }
- if (uvd->handle == NULL) {
- err("%s: uvd->handle == NULL", __func__);
- return;
- }
- if (uvd->handle->md_module == NULL) {
- err("%s: uvd->handle->md_module == NULL", __func__);
- return;
- }
- module_put(uvd->handle->md_module);
-}
-
-int usbvideo_register(
- struct usbvideo **pCams,
- const int num_cams,
- const int num_extra,
- const char *driverName,
- const struct usbvideo_cb *cbTbl,
- struct module *md,
- const struct usb_device_id *id_table)
-{
- struct usbvideo *cams;
- int i, base_size, result;
-
- /* Check parameters for sanity */
- if ((num_cams <= 0) || (pCams == NULL) || (cbTbl == NULL)) {
- err("%s: Illegal call", __func__);
- return -EINVAL;
- }
-
- /* Check registration callback - must be set! */
- if (cbTbl->probe == NULL) {
- err("%s: probe() is required!", __func__);
- return -EINVAL;
- }
-
- base_size = num_cams * sizeof(struct uvd) + sizeof(struct usbvideo);
- cams = kzalloc(base_size, GFP_KERNEL);
- if (cams == NULL) {
- err("Failed to allocate %d. bytes for usbvideo struct", base_size);
- return -ENOMEM;
- }
- dbg("%s: Allocated $%p (%d. bytes) for %d. cameras",
- __func__, cams, base_size, num_cams);
-
- /* Copy callbacks, apply defaults for those that are not set */
- memmove(&cams->cb, cbTbl, sizeof(cams->cb));
- if (cams->cb.getFrame == NULL)
- cams->cb.getFrame = usbvideo_GetFrame;
- if (cams->cb.disconnect == NULL)
- cams->cb.disconnect = usbvideo_Disconnect;
- if (cams->cb.startDataPump == NULL)
- cams->cb.startDataPump = usbvideo_StartDataPump;
- if (cams->cb.stopDataPump == NULL)
- cams->cb.stopDataPump = usbvideo_StopDataPump;
-
- cams->num_cameras = num_cams;
- cams->cam = (struct uvd *) &cams[1];
- cams->md_module = md;
- mutex_init(&cams->lock); /* to 1 == available */
-
- for (i = 0; i < num_cams; i++) {
- struct uvd *up = &cams->cam[i];
-
- up->handle = cams;
-
- /* Allocate user_data separately because of kmalloc's limits */
- if (num_extra > 0) {
- up->user_size = num_cams * num_extra;
- up->user_data = kmalloc(up->user_size, GFP_KERNEL);
- if (up->user_data == NULL) {
- err("%s: Failed to allocate user_data (%d. bytes)",
- __func__, up->user_size);
- while (i) {
- up = &cams->cam[--i];
- kfree(up->user_data);
- }
- kfree(cams);
- return -ENOMEM;
- }
- dbg("%s: Allocated cams[%d].user_data=$%p (%d. bytes)",
- __func__, i, up->user_data, up->user_size);
- }
- }
-
- /*
- * Register ourselves with USB stack.
- */
- strcpy(cams->drvName, (driverName != NULL) ? driverName : "Unknown");
- cams->usbdrv.name = cams->drvName;
- cams->usbdrv.probe = cams->cb.probe;
- cams->usbdrv.disconnect = cams->cb.disconnect;
- cams->usbdrv.id_table = id_table;
-
- /*
- * Update global handle to usbvideo. This is very important
- * because probe() can be called before usb_register() returns.
- * If the handle is not yet updated then the probe() will fail.
- */
- *pCams = cams;
- result = usb_register(&cams->usbdrv);
- if (result) {
- for (i = 0; i < num_cams; i++) {
- struct uvd *up = &cams->cam[i];
- kfree(up->user_data);
- }
- kfree(cams);
- }
-
- return result;
-}
-
-EXPORT_SYMBOL(usbvideo_register);
-
-/*
- * usbvideo_Deregister()
- *
- * Procedure frees all usbvideo and user data structures. Be warned that
- * if you had some dynamically allocated components in ->user field then
- * you should free them before calling here.
- */
-void usbvideo_Deregister(struct usbvideo **pCams)
-{
- struct usbvideo *cams;
- int i;
-
- if (pCams == NULL) {
- err("%s: pCams == NULL", __func__);
- return;
- }
- cams = *pCams;
- if (cams == NULL) {
- err("%s: cams == NULL", __func__);
- return;
- }
-
- dbg("%s: Deregistering %s driver.", __func__, cams->drvName);
- usb_deregister(&cams->usbdrv);
-
- dbg("%s: Deallocating cams=$%p (%d. cameras)", __func__, cams, cams->num_cameras);
- for (i=0; i < cams->num_cameras; i++) {
- struct uvd *up = &cams->cam[i];
- int warning = 0;
-
- if (up->user_data != NULL) {
- if (up->user_size <= 0)
- ++warning;
- } else {
- if (up->user_size > 0)
- ++warning;
- }
- if (warning) {
- err("%s: Warning: user_data=$%p user_size=%d.",
- __func__, up->user_data, up->user_size);
- } else {
- dbg("%s: Freeing %d. $%p->user_data=$%p",
- __func__, i, up, up->user_data);
- kfree(up->user_data);
- }
- }
- /* Whole array was allocated in one chunk */
- dbg("%s: Freed %d uvd structures",
- __func__, cams->num_cameras);
- kfree(cams);
- *pCams = NULL;
-}
-
-EXPORT_SYMBOL(usbvideo_Deregister);
-
-/*
- * usbvideo_Disconnect()
- *
- * This procedure stops all driver activity. Deallocation of
- * the interface-private structure (pointed by 'ptr') is done now
- * (if we don't have any open files) or later, when those files
- * are closed. After that driver should be removable.
- *
- * This code handles surprise removal. The uvd->user is a counter which
- * increments on open() and decrements on close(). If we see here that
- * this counter is not 0 then we have a client who still has us opened.
- * We set uvd->remove_pending flag as early as possible, and after that
- * all access to the camera will gracefully fail. These failures should
- * prompt client to (eventually) close the video device, and then - in
- * usbvideo_v4l_close() - we decrement uvd->uvd_used and usage counter.
- *
- * History:
- * 22-Jan-2000 Added polling of MOD_IN_USE to delay removal until all users gone.
- * 27-Jan-2000 Reworked to allow pending disconnects; see xxx_close()
- * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
- * 19-Oct-2000 Moved to usbvideo module.
- */
-static void usbvideo_Disconnect(struct usb_interface *intf)
-{
- struct uvd *uvd = usb_get_intfdata (intf);
- int i;
-
- if (uvd == NULL) {
- err("%s($%p): Illegal call.", __func__, intf);
- return;
- }
-
- usb_set_intfdata (intf, NULL);
-
- usbvideo_ClientIncModCount(uvd);
- if (uvd->debug > 0)
- dev_info(&intf->dev, "%s(%p.)\n", __func__, intf);
-
- mutex_lock(&uvd->lock);
- uvd->remove_pending = 1; /* Now all ISO data will be ignored */
-
- /* At this time we ask to cancel outstanding URBs */
- GET_CALLBACK(uvd, stopDataPump)(uvd);
-
- for (i=0; i < USBVIDEO_NUMSBUF; i++)
- usb_free_urb(uvd->sbuf[i].urb);
-
- usb_put_dev(uvd->dev);
- uvd->dev = NULL; /* USB device is no more */
-
- video_unregister_device(&uvd->vdev);
- if (uvd->debug > 0)
- dev_info(&intf->dev, "%s: Video unregistered.\n", __func__);
-
- if (uvd->user)
- dev_info(&intf->dev, "%s: In use, disconnect pending.\n",
- __func__);
- else
- usbvideo_CameraRelease(uvd);
- mutex_unlock(&uvd->lock);
- dev_info(&intf->dev, "USB camera disconnected.\n");
-
- usbvideo_ClientDecModCount(uvd);
-}
-
-/*
- * usbvideo_CameraRelease()
- *
- * This code does final release of uvd. This happens
- * after the device is disconnected -and- all clients
- * closed their files.
- *
- * History:
- * 27-Jan-2000 Created.
- */
-static void usbvideo_CameraRelease(struct uvd *uvd)
-{
- if (uvd == NULL) {
- err("%s: Illegal call", __func__);
- return;
- }
-
- RingQueue_Free(&uvd->dp);
- if (VALID_CALLBACK(uvd, userFree))
- GET_CALLBACK(uvd, userFree)(uvd);
- uvd->uvd_used = 0; /* This is atomic, no need to take mutex */
-}
-
-/*
- * usbvideo_find_struct()
- *
- * This code searches the array of preallocated (static) structures
- * and returns index of the first one that isn't in use. Returns -1
- * if there are no free structures.
- *
- * History:
- * 27-Jan-2000 Created.
- */
-static int usbvideo_find_struct(struct usbvideo *cams)
-{
- int u, rv = -1;
-
- if (cams == NULL) {
- err("No usbvideo handle?");
- return -1;
- }
- mutex_lock(&cams->lock);
- for (u = 0; u < cams->num_cameras; u++) {
- struct uvd *uvd = &cams->cam[u];
- if (!uvd->uvd_used) /* This one is free */
- {
- uvd->uvd_used = 1; /* In use now */
- mutex_init(&uvd->lock); /* to 1 == available */
- uvd->dev = NULL;
- rv = u;
- break;
- }
- }
- mutex_unlock(&cams->lock);
- return rv;
-}
-
-static const struct v4l2_file_operations usbvideo_fops = {
- .owner = THIS_MODULE,
- .open = usbvideo_v4l_open,
- .release =usbvideo_v4l_close,
- .read = usbvideo_v4l_read,
- .mmap = usbvideo_v4l_mmap,
- .ioctl = usbvideo_v4l_ioctl,
-};
-static const struct video_device usbvideo_template = {
- .fops = &usbvideo_fops,
-};
-
-struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams)
-{
- int i, devnum;
- struct uvd *uvd = NULL;
-
- if (cams == NULL) {
- err("No usbvideo handle?");
- return NULL;
- }
-
- devnum = usbvideo_find_struct(cams);
- if (devnum == -1) {
- err("IBM USB camera driver: Too many devices!");
- return NULL;
- }
- uvd = &cams->cam[devnum];
- dbg("Device entry #%d. at $%p", devnum, uvd);
-
- /* Not relying upon caller we increase module counter ourselves */
- usbvideo_ClientIncModCount(uvd);
-
- mutex_lock(&uvd->lock);
- for (i=0; i < USBVIDEO_NUMSBUF; i++) {
- uvd->sbuf[i].urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
- if (uvd->sbuf[i].urb == NULL) {
- err("usb_alloc_urb(%d.) failed.", FRAMES_PER_DESC);
- uvd->uvd_used = 0;
- uvd = NULL;
- goto allocate_done;
- }
- }
- uvd->user=0;
- uvd->remove_pending = 0;
- uvd->last_error = 0;
- RingQueue_Initialize(&uvd->dp);
-
- /* Initialize video device structure */
- uvd->vdev = usbvideo_template;
- sprintf(uvd->vdev.name, "%.20s USB Camera", cams->drvName);
- /*
- * The client is free to overwrite those because we
- * return control to the client's probe function right now.
- */
-allocate_done:
- mutex_unlock(&uvd->lock);
- usbvideo_ClientDecModCount(uvd);
- return uvd;
-}
-
-EXPORT_SYMBOL(usbvideo_AllocateDevice);
-
-int usbvideo_RegisterVideoDevice(struct uvd *uvd)
-{
- char tmp1[20], tmp2[20]; /* Buffers for printing */
-
- if (uvd == NULL) {
- err("%s: Illegal call.", __func__);
- return -EINVAL;
- }
- if (uvd->video_endp == 0) {
- dev_info(&uvd->dev->dev,
- "%s: No video endpoint specified; data pump disabled.\n",
- __func__);
- }
- if (uvd->paletteBits == 0) {
- err("%s: No palettes specified!", __func__);
- return -EINVAL;
- }
- if (uvd->defaultPalette == 0) {
- dev_info(&uvd->dev->dev, "%s: No default palette!\n",
- __func__);
- }
-
- uvd->max_frame_size = VIDEOSIZE_X(uvd->canvas) *
- VIDEOSIZE_Y(uvd->canvas) * V4L_BYTES_PER_PIXEL;
- usbvideo_VideosizeToString(tmp1, sizeof(tmp1), uvd->videosize);
- usbvideo_VideosizeToString(tmp2, sizeof(tmp2), uvd->canvas);
-
- if (uvd->debug > 0) {
- dev_info(&uvd->dev->dev,
- "%s: iface=%d. endpoint=$%02x paletteBits=$%08lx\n",
- __func__, uvd->iface, uvd->video_endp,
- uvd->paletteBits);
- }
- if (uvd->dev == NULL) {
- err("%s: uvd->dev == NULL", __func__);
- return -EINVAL;
- }
- uvd->vdev.parent = &uvd->dev->dev;
- uvd->vdev.release = video_device_release_empty;
- if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
- err("%s: video_register_device failed", __func__);
- return -EPIPE;
- }
- if (uvd->debug > 1) {
- dev_info(&uvd->dev->dev,
- "%s: video_register_device() successful\n", __func__);
- }
-
- dev_info(&uvd->dev->dev, "%s on %s: canvas=%s videosize=%s\n",
- (uvd->handle != NULL) ? uvd->handle->drvName : "???",
- video_device_node_name(&uvd->vdev), tmp2, tmp1);
-
- usb_get_dev(uvd->dev);
- return 0;
-}
-
-EXPORT_SYMBOL(usbvideo_RegisterVideoDevice);
-
-/* ******************************************************************** */
-
-static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma)
-{
- struct uvd *uvd = file->private_data;
- unsigned long start = vma->vm_start;
- unsigned long size = vma->vm_end-vma->vm_start;
- unsigned long page, pos;
-
- if (!CAMERA_IS_OPERATIONAL(uvd))
- return -EFAULT;
-
- if (size > (((USBVIDEO_NUMFRAMES * uvd->max_frame_size) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)))
- return -EINVAL;
-
- pos = (unsigned long) uvd->fbuf;
- while (size > 0) {
- page = vmalloc_to_pfn((void *)pos);
- if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
- return -EAGAIN;
-
- start += PAGE_SIZE;
- pos += PAGE_SIZE;
- if (size > PAGE_SIZE)
- size -= PAGE_SIZE;
- else
- size = 0;
- }
-
- return 0;
-}
-
-/*
- * usbvideo_v4l_open()
- *
- * This is part of Video 4 Linux API. The driver can be opened by one
- * client only (checks internal counter 'uvdser'). The procedure
- * then allocates buffers needed for video processing.
- *
- * History:
- * 22-Jan-2000 Rewrote, moved scratch buffer allocation here. Now the
- * camera is also initialized here (once per connect), at
- * expense of V4L client (it waits on open() call).
- * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers.
- * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
- */
-static int usbvideo_v4l_open(struct file *file)
-{
- struct video_device *dev = video_devdata(file);
- struct uvd *uvd = (struct uvd *) dev;
- const int sb_size = FRAMES_PER_DESC * uvd->iso_packet_len;
- int i, errCode = 0;
-
- if (uvd->debug > 1)
- dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev);
-
- if (usbvideo_ClientIncModCount(uvd) < 0)
- return -ENODEV;
- mutex_lock(&uvd->lock);
-
- if (uvd->user) {
- err("%s: Someone tried to open an already opened device!", __func__);
- errCode = -EBUSY;
- } else {
- /* Clear statistics */
- memset(&uvd->stats, 0, sizeof(uvd->stats));
-
- /* Clean pointers so we know if we allocated something */
- for (i=0; i < USBVIDEO_NUMSBUF; i++)
- uvd->sbuf[i].data = NULL;
-
- /* Allocate memory for the frame buffers */
- uvd->fbuf_size = USBVIDEO_NUMFRAMES * uvd->max_frame_size;
- uvd->fbuf = usbvideo_rvmalloc(uvd->fbuf_size);
- RingQueue_Allocate(&uvd->dp, RING_QUEUE_SIZE);
- if ((uvd->fbuf == NULL) ||
- (!RingQueue_IsAllocated(&uvd->dp))) {
- err("%s: Failed to allocate fbuf or dp", __func__);
- errCode = -ENOMEM;
- } else {
- /* Allocate all buffers */
- for (i=0; i < USBVIDEO_NUMFRAMES; i++) {
- uvd->frame[i].frameState = FrameState_Unused;
- uvd->frame[i].data = uvd->fbuf + i*(uvd->max_frame_size);
- /*
- * Set default sizes in case IOCTL (VIDIOCMCAPTURE)
- * is not used (using read() instead).
- */
- uvd->frame[i].canvas = uvd->canvas;
- uvd->frame[i].seqRead_Index = 0;
- }
- for (i=0; i < USBVIDEO_NUMSBUF; i++) {
- uvd->sbuf[i].data = kmalloc(sb_size, GFP_KERNEL);
- if (uvd->sbuf[i].data == NULL) {
- errCode = -ENOMEM;
- break;
- }
- }
- }
- if (errCode != 0) {
- /* Have to free all that memory */
- if (uvd->fbuf != NULL) {
- usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size);
- uvd->fbuf = NULL;
- }
- RingQueue_Free(&uvd->dp);
- for (i=0; i < USBVIDEO_NUMSBUF; i++) {
- kfree(uvd->sbuf[i].data);
- uvd->sbuf[i].data = NULL;
- }
- }
- }
-
- /* If so far no errors then we shall start the camera */
- if (errCode == 0) {
- /* Start data pump if we have valid endpoint */
- if (uvd->video_endp != 0)
- errCode = GET_CALLBACK(uvd, startDataPump)(uvd);
- if (errCode == 0) {
- if (VALID_CALLBACK(uvd, setupOnOpen)) {
- if (uvd->debug > 1)
- dev_info(&uvd->dev->dev,
- "%s: setupOnOpen callback\n",
- __func__);
- errCode = GET_CALLBACK(uvd, setupOnOpen)(uvd);
- if (errCode < 0) {
- err("%s: setupOnOpen callback failed (%d.).",
- __func__, errCode);
- } else if (uvd->debug > 1) {
- dev_info(&uvd->dev->dev,
- "%s: setupOnOpen callback successful\n",
- __func__);
- }
- }
- if (errCode == 0) {
- uvd->settingsAdjusted = 0;
- if (uvd->debug > 1)
- dev_info(&uvd->dev->dev,
- "%s: Open succeeded.\n",
- __func__);
- uvd->user++;
- file->private_data = uvd;
- }
- }
- }
- mutex_unlock(&uvd->lock);
- if (errCode != 0)
- usbvideo_ClientDecModCount(uvd);
- if (uvd->debug > 0)
- dev_info(&uvd->dev->dev, "%s: Returning %d.\n", __func__,
- errCode);
- return errCode;
-}
-
-/*
- * usbvideo_v4l_close()
- *
- * This is part of Video 4 Linux API. The procedure
- * stops streaming and deallocates all buffers that were earlier
- * allocated in usbvideo_v4l_open().
- *
- * History:
- * 22-Jan-2000 Moved scratch buffer deallocation here.
- * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers.
- * 24-May-2000 Moved MOD_DEC_USE_COUNT outside of code that can sleep.
- */
-static int usbvideo_v4l_close(struct file *file)
-{
- struct video_device *dev = file->private_data;
- struct uvd *uvd = (struct uvd *) dev;
- int i;
-
- if (uvd->debug > 1)
- dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev);
-
- mutex_lock(&uvd->lock);
- GET_CALLBACK(uvd, stopDataPump)(uvd);
- usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size);
- uvd->fbuf = NULL;
- RingQueue_Free(&uvd->dp);
-
- for (i=0; i < USBVIDEO_NUMSBUF; i++) {
- kfree(uvd->sbuf[i].data);
- uvd->sbuf[i].data = NULL;
- }
-
-#if USBVIDEO_REPORT_STATS
- usbvideo_ReportStatistics(uvd);
-#endif
-
- uvd->user--;
- if (uvd->remove_pending) {
- if (uvd->debug > 0)
- dev_info(&uvd->dev->dev, "%s: Final disconnect.\n",
- __func__);
- usbvideo_CameraRelease(uvd);
- }
- mutex_unlock(&uvd->lock);
- usbvideo_ClientDecModCount(uvd);
-
- if (uvd->debug > 1)
- dev_info(&uvd->dev->dev, "%s: Completed.\n", __func__);
- file->private_data = NULL;
- return 0;
-}
-
-/*
- * usbvideo_v4l_ioctl()
- *
- * This is part of Video 4 Linux API. The procedure handles ioctl() calls.
- *
- * History:
- * 22-Jan-2000 Corrected VIDIOCSPICT to reject unsupported settings.
- */
-static long usbvideo_v4l_do_ioctl(struct file *file, unsigned int cmd, void *arg)
-{
- struct uvd *uvd = file->private_data;
-
- if (!CAMERA_IS_OPERATIONAL(uvd))
- return -EIO;
-
- switch (cmd) {
- case VIDIOCGCAP:
- {
- struct video_capability *b = arg;
- *b = uvd->vcap;
- return 0;
- }
- case VIDIOCGCHAN:
- {
- struct video_channel *v = arg;
- *v = uvd->vchan;
- return 0;
- }
- case VIDIOCSCHAN:
- {
- struct video_channel *v = arg;
- if (v->channel != 0)
- return -EINVAL;
- return 0;
- }
- case VIDIOCGPICT:
- {
- struct video_picture *pic = arg;
- *pic = uvd->vpic;
- return 0;
- }
- case VIDIOCSPICT:
- {
- struct video_picture *pic = arg;
- /*
- * Use temporary 'video_picture' structure to preserve our
- * own settings (such as color depth, palette) that we
- * aren't allowing everyone (V4L client) to change.
- */
- uvd->vpic.brightness = pic->brightness;
- uvd->vpic.hue = pic->hue;
- uvd->vpic.colour = pic->colour;
- uvd->vpic.contrast = pic->contrast;
- uvd->settingsAdjusted = 0; /* Will force new settings */
- return 0;
- }
- case VIDIOCSWIN:
- {
- struct video_window *vw = arg;
-
- if(VALID_CALLBACK(uvd, setVideoMode)) {
- return GET_CALLBACK(uvd, setVideoMode)(uvd, vw);
- }
-
- if (vw->flags)
- return -EINVAL;
- if (vw->clipcount)
- return -EINVAL;
- if (vw->width != VIDEOSIZE_X(uvd->canvas))
- return -EINVAL;
- if (vw->height != VIDEOSIZE_Y(uvd->canvas))
- return -EINVAL;
-
- return 0;
- }
- case VIDIOCGWIN:
- {
- struct video_window *vw = arg;
-
- vw->x = 0;
- vw->y = 0;
- vw->width = VIDEOSIZE_X(uvd->videosize);
- vw->height = VIDEOSIZE_Y(uvd->videosize);
- vw->chromakey = 0;
- if (VALID_CALLBACK(uvd, getFPS))
- vw->flags = GET_CALLBACK(uvd, getFPS)(uvd);
- else
- vw->flags = 10; /* FIXME: do better! */
- return 0;
- }
- case VIDIOCGMBUF:
- {
- struct video_mbuf *vm = arg;
- int i;
-
- memset(vm, 0, sizeof(*vm));
- vm->size = uvd->max_frame_size * USBVIDEO_NUMFRAMES;
- vm->frames = USBVIDEO_NUMFRAMES;
- for(i = 0; i < USBVIDEO_NUMFRAMES; i++)
- vm->offsets[i] = i * uvd->max_frame_size;
-
- return 0;
- }
- case VIDIOCMCAPTURE:
- {
- struct video_mmap *vm = arg;
-
- if (uvd->debug >= 1) {
- dev_info(&uvd->dev->dev,
- "VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.\n",
- vm->frame, vm->width, vm->height, vm->format);
- }
- /*
- * Check if the requested size is supported. If the requestor
- * requests too big a frame then we may be tricked into accessing
- * outside of own preallocated frame buffer (in uvd->frame).
- * This will cause oops or a security hole. Theoretically, we
- * could only clamp the size down to acceptable bounds, but then
- * we'd need to figure out how to insert our smaller buffer into
- * larger caller's buffer... this is not an easy question. So we
- * here just flatly reject too large requests, assuming that the
- * caller will resubmit with smaller size. Callers should know
- * what size we support (returned by VIDIOCGCAP). However vidcat,
- * for one, does not care and allows to ask for any size.
- */
- if ((vm->width > VIDEOSIZE_X(uvd->canvas)) ||
- (vm->height > VIDEOSIZE_Y(uvd->canvas))) {
- if (uvd->debug > 0) {
- dev_info(&uvd->dev->dev,
- "VIDIOCMCAPTURE: Size=%dx%d "
- "too large; allowed only up "
- "to %ldx%ld\n", vm->width,
- vm->height,
- VIDEOSIZE_X(uvd->canvas),
- VIDEOSIZE_Y(uvd->canvas));
- }
- return -EINVAL;
- }
- /* Check if the palette is supported */
- if (((1L << vm->format) & uvd->paletteBits) == 0) {
- if (uvd->debug > 0) {
- dev_info(&uvd->dev->dev,
- "VIDIOCMCAPTURE: format=%d. "
- "not supported "
- "(paletteBits=$%08lx)\n",
- vm->format, uvd->paletteBits);
- }
- return -EINVAL;
- }
- if ((vm->frame < 0) || (vm->frame >= USBVIDEO_NUMFRAMES)) {
- err("VIDIOCMCAPTURE: vm.frame=%d. !E [0-%d]", vm->frame, USBVIDEO_NUMFRAMES-1);
- return -EINVAL;
- }
- if (uvd->frame[vm->frame].frameState == FrameState_Grabbing) {
- /* Not an error - can happen */
- }
- uvd->frame[vm->frame].request = VIDEOSIZE(vm->width, vm->height);
- uvd->frame[vm->frame].palette = vm->format;
-
- /* Mark it as ready */
- uvd->frame[vm->frame].frameState = FrameState_Ready;
-
- return usbvideo_NewFrame(uvd, vm->frame);
- }
- case VIDIOCSYNC:
- {
- int *frameNum = arg;
- int ret;
-
- if (*frameNum < 0 || *frameNum >= USBVIDEO_NUMFRAMES)
- return -EINVAL;
-
- if (uvd->debug >= 1)
- dev_info(&uvd->dev->dev,
- "VIDIOCSYNC: syncing to frame %d.\n",
- *frameNum);
- if (uvd->flags & FLAGS_NO_DECODING)
- ret = usbvideo_GetFrame(uvd, *frameNum);
- else if (VALID_CALLBACK(uvd, getFrame)) {
- ret = GET_CALLBACK(uvd, getFrame)(uvd, *frameNum);
- if ((ret < 0) && (uvd->debug >= 1)) {
- err("VIDIOCSYNC: getFrame() returned %d.", ret);
- }
- } else {
- err("VIDIOCSYNC: getFrame is not set");
- ret = -EFAULT;
- }
-
- /*
- * The frame is in FrameState_Done_Hold state. Release it
- * right now because its data is already mapped into
- * the user space and it's up to the application to
- * make use of it until it asks for another frame.
- */
- uvd->frame[*frameNum].frameState = FrameState_Unused;
- return ret;
- }
- case VIDIOCGFBUF:
- {
- struct video_buffer *vb = arg;
-
- memset(vb, 0, sizeof(*vb));
- return 0;
- }
- case VIDIOCKEY:
- return 0;
-
- case VIDIOCCAPTURE:
- return -EINVAL;
-
- case VIDIOCSFBUF:
-
- case VIDIOCGTUNER:
- case VIDIOCSTUNER:
-
- case VIDIOCGFREQ:
- case VIDIOCSFREQ:
-
- case VIDIOCGAUDIO:
- case VIDIOCSAUDIO:
- return -EINVAL;
-
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static long usbvideo_v4l_ioctl(struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- return video_usercopy(file, cmd, arg, usbvideo_v4l_do_ioctl);
-}
-
-/*
- * usbvideo_v4l_read()
- *
- * This is mostly boring stuff. We simply ask for a frame and when it
- * arrives copy all the video data from it into user space. There is
- * no obvious need to override this method.
- *
- * History:
- * 20-Oct-2000 Created.
- * 01-Nov-2000 Added mutex (uvd->lock).
- */
-static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct uvd *uvd = file->private_data;
- int noblock = file->f_flags & O_NONBLOCK;
- int frmx = -1, i;
- struct usbvideo_frame *frame;
-
- if (!CAMERA_IS_OPERATIONAL(uvd) || (buf == NULL))
- return -EFAULT;
-
- if (uvd->debug >= 1)
- dev_info(&uvd->dev->dev,
- "%s: %Zd. bytes, noblock=%d.\n",
- __func__, count, noblock);
-
- mutex_lock(&uvd->lock);
-
- /* See if a frame is completed, then use it. */
- for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
- if ((uvd->frame[i].frameState == FrameState_Done) ||
- (uvd->frame[i].frameState == FrameState_Done_Hold) ||
- (uvd->frame[i].frameState == FrameState_Error)) {
- frmx = i;
- break;
- }
- }
-
- /* FIXME: If we don't start a frame here then who ever does? */
- if (noblock && (frmx == -1)) {
- count = -EAGAIN;
- goto read_done;
- }
-
- /*
- * If no FrameState_Done, look for a FrameState_Grabbing state.
- * See if a frame is in process (grabbing), then use it.
- * We will need to wait until it becomes cooked, of course.
- */
- if (frmx == -1) {
- for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
- if (uvd->frame[i].frameState == FrameState_Grabbing) {
- frmx = i;
- break;
- }
- }
- }
-
- /*
- * If no frame is active, start one. We don't care which one
- * it will be, so #0 is as good as any.
- * In read access mode we don't have convenience of VIDIOCMCAPTURE
- * to specify the requested palette (video format) on per-frame
- * basis. This means that we have to return data in -some- format
- * and just hope that the client knows what to do with it.
- * The default format is configured in uvd->defaultPalette field
- * as one of VIDEO_PALETTE_xxx values. We stuff it into the new
- * frame and initiate the frame filling process.
- */
- if (frmx == -1) {
- if (uvd->defaultPalette == 0) {
- err("%s: No default palette; don't know what to do!", __func__);
- count = -EFAULT;
- goto read_done;
- }
- frmx = 0;
- /*
- * We have no per-frame control over video size.
- * Therefore we only can use whatever size was
- * specified as default.
- */
- uvd->frame[frmx].request = uvd->videosize;
- uvd->frame[frmx].palette = uvd->defaultPalette;
- uvd->frame[frmx].frameState = FrameState_Ready;
- usbvideo_NewFrame(uvd, frmx);
- /* Now frame 0 is supposed to start filling... */
- }
-
- /*
- * Get a pointer to the active frame. It is either previously
- * completed frame or frame in progress but not completed yet.
- */
- frame = &uvd->frame[frmx];
-
- /*
- * Sit back & wait until the frame gets filled and postprocessed.
- * If we fail to get the picture [in time] then return the error.
- * In this call we specify that we want the frame to be waited for,
- * postprocessed and switched into FrameState_Done_Hold state. This
- * state is used to hold the frame as "fully completed" between
- * subsequent partial reads of the same frame.
- */
- if (frame->frameState != FrameState_Done_Hold) {
- long rv = -EFAULT;
- if (uvd->flags & FLAGS_NO_DECODING)
- rv = usbvideo_GetFrame(uvd, frmx);
- else if (VALID_CALLBACK(uvd, getFrame))
- rv = GET_CALLBACK(uvd, getFrame)(uvd, frmx);
- else
- err("getFrame is not set");
- if ((rv != 0) || (frame->frameState != FrameState_Done_Hold)) {
- count = rv;
- goto read_done;
- }
- }
-
- /*
- * Copy bytes to user space. We allow for partial reads, which
- * means that the user application can request read less than
- * the full frame size. It is up to the application to issue
- * subsequent calls until entire frame is read.
- *
- * First things first, make sure we don't copy more than we
- * have - even if the application wants more. That would be
- * a big security embarassment!
- */
- if ((count + frame->seqRead_Index) > frame->seqRead_Length)
- count = frame->seqRead_Length - frame->seqRead_Index;
-
- /*
- * Copy requested amount of data to user space. We start
- * copying from the position where we last left it, which
- * will be zero for a new frame (not read before).
- */
- if (copy_to_user(buf, frame->data + frame->seqRead_Index, count)) {
- count = -EFAULT;
- goto read_done;
- }
-
- /* Update last read position */
- frame->seqRead_Index += count;
- if (uvd->debug >= 1) {
- err("%s: {copy} count used=%Zd, new seqRead_Index=%ld",
- __func__, count, frame->seqRead_Index);
- }
-
- /* Finally check if the frame is done with and "release" it */
- if (frame->seqRead_Index >= frame->seqRead_Length) {
- /* All data has been read */
- frame->seqRead_Index = 0;
-
- /* Mark it as available to be used again. */
- uvd->frame[frmx].frameState = FrameState_Unused;
- if (usbvideo_NewFrame(uvd, (frmx + 1) % USBVIDEO_NUMFRAMES)) {
- err("%s: usbvideo_NewFrame failed.", __func__);
- }
- }
-read_done:
- mutex_unlock(&uvd->lock);
- return count;
-}
-
-/*
- * Make all of the blocks of data contiguous
- */
-static int usbvideo_CompressIsochronous(struct uvd *uvd, struct urb *urb)
-{
- char *cdata;
- int i, totlen = 0;
-
- for (i = 0; i < urb->number_of_packets; i++) {
- int n = urb->iso_frame_desc[i].actual_length;
- int st = urb->iso_frame_desc[i].status;
-
- cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
-
- /* Detect and ignore errored packets */
- if (st < 0) {
- if (uvd->debug >= 1)
- err("Data error: packet=%d. len=%d. status=%d.", i, n, st);
- uvd->stats.iso_err_count++;
- continue;
- }
-
- /* Detect and ignore empty packets */
- if (n <= 0) {
- uvd->stats.iso_skip_count++;
- continue;
- }
- totlen += n; /* Little local accounting */
- RingQueue_Enqueue(&uvd->dp, cdata, n);
- }
- return totlen;
-}
-
-static void usbvideo_IsocIrq(struct urb *urb)
-{
- int i, ret, len;
- struct uvd *uvd = urb->context;
-
- /* We don't want to do anything if we are about to be removed! */
- if (!CAMERA_IS_OPERATIONAL(uvd))
- return;
-#if 0
- if (urb->actual_length > 0) {
- dev_info(&uvd->dev->dev,
- "urb=$%p status=%d. errcount=%d. length=%d.\n",
- urb, urb->status, urb->error_count,
- urb->actual_length);
- } else {
- static int c = 0;
- if (c++ % 100 == 0)
- dev_info(&uvd->dev->dev, "No Isoc data\n");
- }
-#endif
-
- if (!uvd->streaming) {
- if (uvd->debug >= 1)
- dev_info(&uvd->dev->dev,
- "Not streaming, but interrupt!\n");
- return;
- }
-
- uvd->stats.urb_count++;
- if (urb->actual_length <= 0)
- goto urb_done_with;
-
- /* Copy the data received into ring queue */
- len = usbvideo_CompressIsochronous(uvd, urb);
- uvd->stats.urb_length = len;
- if (len <= 0)
- goto urb_done_with;
-
- /* Here we got some data */
- uvd->stats.data_count += len;
- RingQueue_WakeUpInterruptible(&uvd->dp);
-
-urb_done_with:
- for (i = 0; i < FRAMES_PER_DESC; i++) {
- urb->iso_frame_desc[i].status = 0;
- urb->iso_frame_desc[i].actual_length = 0;
- }
- urb->status = 0;
- urb->dev = uvd->dev;
- ret = usb_submit_urb (urb, GFP_KERNEL);
- if(ret)
- err("usb_submit_urb error (%d)", ret);
- return;
-}
-
-/*
- * usbvideo_StartDataPump()
- *
- * History:
- * 27-Jan-2000 Used ibmcam->iface, ibmcam->ifaceAltActive instead
- * of hardcoded values. Simplified by using for loop,
- * allowed any number of URBs.
- */
-static int usbvideo_StartDataPump(struct uvd *uvd)
-{
- struct usb_device *dev = uvd->dev;
- int i, errFlag;
-
- if (uvd->debug > 1)
- dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd);
-
- if (!CAMERA_IS_OPERATIONAL(uvd)) {
- err("%s: Camera is not operational", __func__);
- return -EFAULT;
- }
- uvd->curframe = -1;
-
- /* Alternate interface 1 is is the biggest frame size */
- i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive);
- if (i < 0) {
- err("%s: usb_set_interface error", __func__);
- uvd->last_error = i;
- return -EBUSY;
- }
- if (VALID_CALLBACK(uvd, videoStart))
- GET_CALLBACK(uvd, videoStart)(uvd);
- else
- err("%s: videoStart not set", __func__);
-
- /* We double buffer the Iso lists */
- for (i=0; i < USBVIDEO_NUMSBUF; i++) {
- int j, k;
- struct urb *urb = uvd->sbuf[i].urb;
- urb->dev = dev;
- urb->context = uvd;
- urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp);
- urb->interval = 1;
- urb->transfer_flags = URB_ISO_ASAP;
- urb->transfer_buffer = uvd->sbuf[i].data;
- urb->complete = usbvideo_IsocIrq;
- urb->number_of_packets = FRAMES_PER_DESC;
- urb->transfer_buffer_length = uvd->iso_packet_len * FRAMES_PER_DESC;
- for (j=k=0; j < FRAMES_PER_DESC; j++, k += uvd->iso_packet_len) {
- urb->iso_frame_desc[j].offset = k;
- urb->iso_frame_desc[j].length = uvd->iso_packet_len;
- }
- }
-
- /* Submit all URBs */
- for (i=0; i < USBVIDEO_NUMSBUF; i++) {
- errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL);
- if (errFlag)
- err("%s: usb_submit_isoc(%d) ret %d", __func__, i, errFlag);
- }
-
- uvd->streaming = 1;
- if (uvd->debug > 1)
- dev_info(&uvd->dev->dev,
- "%s: streaming=1 video_endp=$%02x\n", __func__,
- uvd->video_endp);
- return 0;
-}
-
-/*
- * usbvideo_StopDataPump()
- *
- * This procedure stops streaming and deallocates URBs. Then it
- * activates zero-bandwidth alt. setting of the video interface.
- *
- * History:
- * 22-Jan-2000 Corrected order of actions to work after surprise removal.
- * 27-Jan-2000 Used uvd->iface, uvd->ifaceAltInactive instead of hardcoded values.
- */
-static void usbvideo_StopDataPump(struct uvd *uvd)
-{
- int i, j;
-
- if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL))
- return;
-
- if (uvd->debug > 1)
- dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd);
-
- /* Unschedule all of the iso td's */
- for (i=0; i < USBVIDEO_NUMSBUF; i++) {
- usb_kill_urb(uvd->sbuf[i].urb);
- }
- if (uvd->debug > 1)
- dev_info(&uvd->dev->dev, "%s: streaming=0\n", __func__);
- uvd->streaming = 0;
-
- if (!uvd->remove_pending) {
- /* Invoke minidriver's magic to stop the camera */
- if (VALID_CALLBACK(uvd, videoStop))
- GET_CALLBACK(uvd, videoStop)(uvd);
- else
- err("%s: videoStop not set", __func__);
-
- /* Set packet size to 0 */
- j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive);
- if (j < 0) {
- err("%s: usb_set_interface() error %d.", __func__, j);
- uvd->last_error = j;
- }
- }
-}
-
-/*
- * usbvideo_NewFrame()
- *
- * History:
- * 29-Mar-00 Added copying of previous frame into the current one.
- * 6-Aug-00 Added model 3 video sizes, removed redundant width, height.
- */
-static int usbvideo_NewFrame(struct uvd *uvd, int framenum)
-{
- struct usbvideo_frame *frame;
- int n;
-
- if (uvd->debug > 1)
- dev_info(&uvd->dev->dev, "usbvideo_NewFrame($%p,%d.)\n", uvd,
- framenum);
-
- /* If we're not grabbing a frame right now and the other frame is */
- /* ready to be grabbed into, then use it instead */
- if (uvd->curframe != -1)
- return 0;
-
- /* If necessary we adjust picture settings between frames */
- if (!uvd->settingsAdjusted) {
- if (VALID_CALLBACK(uvd, adjustPicture))
- GET_CALLBACK(uvd, adjustPicture)(uvd);
- uvd->settingsAdjusted = 1;
- }
-
- n = (framenum + 1) % USBVIDEO_NUMFRAMES;
- if (uvd->frame[n].frameState == FrameState_Ready)
- framenum = n;
-
- frame = &uvd->frame[framenum];
-
- frame->frameState = FrameState_Grabbing;
- frame->scanstate = ScanState_Scanning;
- frame->seqRead_Length = 0; /* Accumulated in xxx_parse_data() */
- frame->deinterlace = Deinterlace_None;
- frame->flags = 0; /* No flags yet, up to minidriver (or us) to set them */
- uvd->curframe = framenum;
-
- /*
- * Normally we would want to copy previous frame into the current one
- * before we even start filling it with data; this allows us to stop
- * filling at any moment; top portion of the frame will be new and
- * bottom portion will stay as it was in previous frame. If we don't
- * do that then missing chunks of video stream will result in flickering
- * portions of old data whatever it was before.
- *
- * If we choose not to copy previous frame (to, for example, save few
- * bus cycles - the frame can be pretty large!) then we have an option
- * to clear the frame before using. If we experience losses in this
- * mode then missing picture will be black (no flickering).
- *
- * Finally, if user chooses not to clean the current frame before
- * filling it with data then the old data will be visible if we fail
- * to refill entire frame with new data.
- */
- if (!(uvd->flags & FLAGS_SEPARATE_FRAMES)) {
- /* This copies previous frame into this one to mask losses */
- int prev = (framenum - 1 + USBVIDEO_NUMFRAMES) % USBVIDEO_NUMFRAMES;
- memmove(frame->data, uvd->frame[prev].data, uvd->max_frame_size);
- } else {
- if (uvd->flags & FLAGS_CLEAN_FRAMES) {
- /* This provides a "clean" frame but slows things down */
- memset(frame->data, 0, uvd->max_frame_size);
- }
- }
- return 0;
-}
-
-/*
- * usbvideo_CollectRawData()
- *
- * This procedure can be used instead of 'processData' callback if you
- * only want to dump the raw data from the camera into the output
- * device (frame buffer). You can look at it with V4L client, but the
- * image will be unwatchable. The main purpose of this code and of the
- * mode FLAGS_NO_DECODING is debugging and capturing of datastreams from
- * new, unknown cameras. This procedure will be automatically invoked
- * instead of the specified callback handler when uvd->flags has bit
- * FLAGS_NO_DECODING set. Therefore, any regular build of any driver
- * based on usbvideo can use this feature at any time.
- */
-static void usbvideo_CollectRawData(struct uvd *uvd, struct usbvideo_frame *frame)
-{
- int n;
-
- assert(uvd != NULL);
- assert(frame != NULL);
-
- /* Try to move data from queue into frame buffer */
- n = RingQueue_GetLength(&uvd->dp);
- if (n > 0) {
- int m;
- /* See how much space we have left */
- m = uvd->max_frame_size - frame->seqRead_Length;
- if (n > m)
- n = m;
- /* Now move that much data into frame buffer */
- RingQueue_Dequeue(
- &uvd->dp,
- frame->data + frame->seqRead_Length,
- m);
- frame->seqRead_Length += m;
- }
- /* See if we filled the frame */
- if (frame->seqRead_Length >= uvd->max_frame_size) {
- frame->frameState = FrameState_Done;
- uvd->curframe = -1;
- uvd->stats.frame_num++;
- }
-}
-
-static int usbvideo_GetFrame(struct uvd *uvd, int frameNum)
-{
- struct usbvideo_frame *frame = &uvd->frame[frameNum];
-
- if (uvd->debug >= 2)
- dev_info(&uvd->dev->dev, "%s($%p,%d.)\n", __func__, uvd,
- frameNum);
-
- switch (frame->frameState) {
- case FrameState_Unused:
- if (uvd->debug >= 2)
- dev_info(&uvd->dev->dev, "%s: FrameState_Unused\n",
- __func__);
- return -EINVAL;
- case FrameState_Ready:
- case FrameState_Grabbing:
- case FrameState_Error:
- {
- int ntries, signalPending;
- redo:
- if (!CAMERA_IS_OPERATIONAL(uvd)) {
- if (uvd->debug >= 2)
- dev_info(&uvd->dev->dev,
- "%s: Camera is not operational (1)\n",
- __func__);
- return -EIO;
- }
- ntries = 0;
- do {
- RingQueue_InterruptibleSleepOn(&uvd->dp);
- signalPending = signal_pending(current);
- if (!CAMERA_IS_OPERATIONAL(uvd)) {
- if (uvd->debug >= 2)
- dev_info(&uvd->dev->dev,
- "%s: Camera is not "
- "operational (2)\n", __func__);
- return -EIO;
- }
- assert(uvd->fbuf != NULL);
- if (signalPending) {
- if (uvd->debug >= 2)
- dev_info(&uvd->dev->dev,
- "%s: Signal=$%08x\n", __func__,
- signalPending);
- if (uvd->flags & FLAGS_RETRY_VIDIOCSYNC) {
- usbvideo_TestPattern(uvd, 1, 0);
- uvd->curframe = -1;
- uvd->stats.frame_num++;
- if (uvd->debug >= 2)
- dev_info(&uvd->dev->dev,
- "%s: Forced test "
- "pattern screen\n",
- __func__);
- return 0;
- } else {
- /* Standard answer: Interrupted! */
- if (uvd->debug >= 2)
- dev_info(&uvd->dev->dev,
- "%s: Interrupted!\n",
- __func__);
- return -EINTR;
- }
- } else {
- /* No signals - we just got new data in dp queue */
- if (uvd->flags & FLAGS_NO_DECODING)
- usbvideo_CollectRawData(uvd, frame);
- else if (VALID_CALLBACK(uvd, processData))
- GET_CALLBACK(uvd, processData)(uvd, frame);
- else
- err("%s: processData not set", __func__);
- }
- } while (frame->frameState == FrameState_Grabbing);
- if (uvd->debug >= 2) {
- dev_info(&uvd->dev->dev,
- "%s: Grabbing done; state=%d. (%lu. bytes)\n",
- __func__, frame->frameState,
- frame->seqRead_Length);
- }
- if (frame->frameState == FrameState_Error) {
- int ret = usbvideo_NewFrame(uvd, frameNum);
- if (ret < 0) {
- err("%s: usbvideo_NewFrame() failed (%d.)", __func__, ret);
- return ret;
- }
- goto redo;
- }
- /* Note that we fall through to meet our destiny below */
- }
- case FrameState_Done:
- /*
- * Do all necessary postprocessing of data prepared in
- * "interrupt" code and the collecting code above. The
- * frame gets marked as FrameState_Done by queue parsing code.
- * This status means that we collected enough data and
- * most likely processed it as we went through. However
- * the data may need postprocessing, such as deinterlacing
- * or picture adjustments implemented in software (horror!)
- *
- * As soon as the frame becomes "final" it gets promoted to
- * FrameState_Done_Hold status where it will remain until the
- * caller consumed all the video data from the frame. Then
- * the empty shell of ex-frame is thrown out for dogs to eat.
- * But we, worried about pets, will recycle the frame!
- */
- uvd->stats.frame_num++;
- if ((uvd->flags & FLAGS_NO_DECODING) == 0) {
- if (VALID_CALLBACK(uvd, postProcess))
- GET_CALLBACK(uvd, postProcess)(uvd, frame);
- if (frame->flags & USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST)
- usbvideo_SoftwareContrastAdjustment(uvd, frame);
- }
- frame->frameState = FrameState_Done_Hold;
- if (uvd->debug >= 2)
- dev_info(&uvd->dev->dev,
- "%s: Entered FrameState_Done_Hold state.\n",
- __func__);
- return 0;
-
- case FrameState_Done_Hold:
- /*
- * We stay in this state indefinitely until someone external,
- * like ioctl() or read() call finishes digesting the frame
- * data. Then it will mark the frame as FrameState_Unused and
- * it will be released back into the wild to roam freely.
- */
- if (uvd->debug >= 2)
- dev_info(&uvd->dev->dev,
- "%s: FrameState_Done_Hold state.\n",
- __func__);
- return 0;
- }
-
- /* Catch-all for other cases. We shall not be here. */
- err("%s: Invalid state %d.", __func__, frame->frameState);
- frame->frameState = FrameState_Unused;
- return 0;
-}
-
-/*
- * usbvideo_DeinterlaceFrame()
- *
- * This procedure deinterlaces the given frame. Some cameras produce
- * only half of scanlines - sometimes only even lines, sometimes only
- * odd lines. The deinterlacing method is stored in frame->deinterlace
- * variable.
- *
- * Here we scan the frame vertically and replace missing scanlines with
- * average between surrounding ones - before and after. If we have no
- * line above then we just copy next line. Similarly, if we need to
- * create a last line then preceding line is used.
- */
-void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame)
-{
- if ((uvd == NULL) || (frame == NULL))
- return;
-
- if ((frame->deinterlace == Deinterlace_FillEvenLines) ||
- (frame->deinterlace == Deinterlace_FillOddLines))
- {
- const int v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
- int i = (frame->deinterlace == Deinterlace_FillEvenLines) ? 0 : 1;
-
- for (; i < VIDEOSIZE_Y(frame->request); i += 2) {
- const unsigned char *fs1, *fs2;
- unsigned char *fd;
- int ip, in, j; /* Previous and next lines */
-
- /*
- * Need to average lines before and after 'i'.
- * If we go out of bounds seeking those lines then
- * we point back to existing line.
- */
- ip = i - 1; /* First, get rough numbers */
- in = i + 1;
-
- /* Now validate */
- if (ip < 0)
- ip = in;
- if (in >= VIDEOSIZE_Y(frame->request))
- in = ip;
-
- /* Sanity check */
- if ((ip < 0) || (in < 0) ||
- (ip >= VIDEOSIZE_Y(frame->request)) ||
- (in >= VIDEOSIZE_Y(frame->request)))
- {
- err("Error: ip=%d. in=%d. req.height=%ld.",
- ip, in, VIDEOSIZE_Y(frame->request));
- break;
- }
-
- /* Now we need to average lines 'ip' and 'in' to produce line 'i' */
- fs1 = frame->data + (v4l_linesize * ip);
- fs2 = frame->data + (v4l_linesize * in);
- fd = frame->data + (v4l_linesize * i);
-
- /* Average lines around destination */
- for (j=0; j < v4l_linesize; j++) {
- fd[j] = (unsigned char)((((unsigned) fs1[j]) +
- ((unsigned)fs2[j])) >> 1);
- }
- }
- }
-
- /* Optionally display statistics on the screen */
- if (uvd->flags & FLAGS_OVERLAY_STATS)
- usbvideo_OverlayStats(uvd, frame);
-}
-
-EXPORT_SYMBOL(usbvideo_DeinterlaceFrame);
-
-/*
- * usbvideo_SoftwareContrastAdjustment()
- *
- * This code adjusts the contrast of the frame, assuming RGB24 format.
- * As most software image processing, this job is CPU-intensive.
- * Get a camera that supports hardware adjustment!
- *
- * History:
- * 09-Feb-2001 Created.
- */
-static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
- struct usbvideo_frame *frame)
-{
- int i, j, v4l_linesize;
- signed long adj;
- const int ccm = 128; /* Color correction median - see below */
-
- if ((uvd == NULL) || (frame == NULL)) {
- err("%s: Illegal call.", __func__);
- return;
- }
- adj = (uvd->vpic.contrast - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/
- RESTRICT_TO_RANGE(adj, -ccm, ccm+1);
- if (adj == 0) {
- /* In rare case of no adjustment */
- return;
- }
- v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
- for (i=0; i < VIDEOSIZE_Y(frame->request); i++) {
- unsigned char *fd = frame->data + (v4l_linesize * i);
- for (j=0; j < v4l_linesize; j++) {
- signed long v = (signed long) fd[j];
- /* Magnify up to 2 times, reduce down to zero */
- v = 128 + ((ccm + adj) * (v - 128)) / ccm;
- RESTRICT_TO_RANGE(v, 0, 0xFF); /* Must flatten tails */
- fd[j] = (unsigned char) v;
- }
- }
-}
-
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef usbvideo_h
-#define usbvideo_h
-
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-
-/* Most helpful debugging aid */
-#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__))))
-
-#define USBVIDEO_REPORT_STATS 1 /* Set to 0 to block statistics on close */
-
-/* Bit flags (options) */
-#define FLAGS_RETRY_VIDIOCSYNC (1 << 0)
-#define FLAGS_MONOCHROME (1 << 1)
-#define FLAGS_DISPLAY_HINTS (1 << 2)
-#define FLAGS_OVERLAY_STATS (1 << 3)
-#define FLAGS_FORCE_TESTPATTERN (1 << 4)
-#define FLAGS_SEPARATE_FRAMES (1 << 5)
-#define FLAGS_CLEAN_FRAMES (1 << 6)
-#define FLAGS_NO_DECODING (1 << 7)
-
-/* Bit flags for frames (apply to the frame where they are specified) */
-#define USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST (1 << 0)
-
-/* Camera capabilities (maximum) */
-#define CAMERA_URB_FRAMES 32
-#define CAMERA_MAX_ISO_PACKET 1023 /* 1022 actually sent by camera */
-#define FRAMES_PER_DESC (CAMERA_URB_FRAMES)
-#define FRAME_SIZE_PER_DESC (CAMERA_MAX_ISO_PACKET)
-
-/* This macro restricts an int variable to an inclusive range */
-#define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }
-
-#define V4L_BYTES_PER_PIXEL 3 /* Because we produce RGB24 */
-
-/*
- * Use this macro to construct constants for different video sizes.
- * We have to deal with different video sizes that have to be
- * configured in the device or compared against when we receive
- * a data. Normally one would define a bunch of VIDEOSIZE_x_by_y
- * #defines and that's the end of story. However this solution
- * does not allow to convert between real pixel sizes and the
- * constant (integer) value that may be used to tag a frame or
- * whatever. The set of macros below constructs videosize constants
- * from the pixel size and allows to reconstruct the pixel size
- * from the combined value later.
- */
-#define VIDEOSIZE(x,y) (((x) & 0xFFFFL) | (((y) & 0xFFFFL) << 16))
-#define VIDEOSIZE_X(vs) ((vs) & 0xFFFFL)
-#define VIDEOSIZE_Y(vs) (((vs) >> 16) & 0xFFFFL)
-typedef unsigned long videosize_t;
-
-/*
- * This macro checks if the camera is still operational. The 'uvd'
- * pointer must be valid, uvd->dev must be valid, we are not
- * removing the device and the device has not erred on us.
- */
-#define CAMERA_IS_OPERATIONAL(uvd) (\
- (uvd != NULL) && \
- ((uvd)->dev != NULL) && \
- ((uvd)->last_error == 0) && \
- (!(uvd)->remove_pending))
-
-/*
- * We use macros to do YUV -> RGB conversion because this is
- * very important for speed and totally unimportant for size.
- *
- * YUV -> RGB Conversion
- * ---------------------
- *
- * B = 1.164*(Y-16) + 2.018*(V-128)
- * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128)
- * R = 1.164*(Y-16) + 1.596*(U-128)
- *
- * If you fancy integer arithmetics (as you should), hear this:
- *
- * 65536*B = 76284*(Y-16) + 132252*(V-128)
- * 65536*G = 76284*(Y-16) - 53281*(U-128) - 25625*(V-128)
- * 65536*R = 76284*(Y-16) + 104595*(U-128)
- *
- * Make sure the output values are within [0..255] range.
- */
-#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x)))
-#define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \
- int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
- mm_y = (my) - 16; \
- mm_u = (mu) - 128; \
- mm_v = (mv) - 128; \
- mm_yc= mm_y * 76284; \
- mm_b = (mm_yc + 132252*mm_v ) >> 16; \
- mm_g = (mm_yc - 53281*mm_u - 25625*mm_v ) >> 16; \
- mm_r = (mm_yc + 104595*mm_u ) >> 16; \
- mb = LIMIT_RGB(mm_b); \
- mg = LIMIT_RGB(mm_g); \
- mr = LIMIT_RGB(mm_r); \
-}
-
-#define RING_QUEUE_SIZE (128*1024) /* Must be a power of 2 */
-#define RING_QUEUE_ADVANCE_INDEX(rq,ind,n) (rq)->ind = ((rq)->ind + (n)) & ((rq)->length-1)
-#define RING_QUEUE_DEQUEUE_BYTES(rq,n) RING_QUEUE_ADVANCE_INDEX(rq,ri,n)
-#define RING_QUEUE_PEEK(rq,ofs) ((rq)->queue[((ofs) + (rq)->ri) & ((rq)->length-1)])
-
-struct RingQueue {
- unsigned char *queue; /* Data from the Isoc data pump */
- int length; /* How many bytes allocated for the queue */
- int wi; /* That's where we write */
- int ri; /* Read from here until you hit write index */
- wait_queue_head_t wqh; /* Processes waiting */
-};
-
-enum ScanState {
- ScanState_Scanning, /* Scanning for header */
- ScanState_Lines /* Parsing lines */
-};
-
-/* Completion states of the data parser */
-enum ParseState {
- scan_Continue, /* Just parse next item */
- scan_NextFrame, /* Frame done, send it to V4L */
- scan_Out, /* Not enough data for frame */
- scan_EndParse /* End parsing */
-};
-
-enum FrameState {
- FrameState_Unused, /* Unused (no MCAPTURE) */
- FrameState_Ready, /* Ready to start grabbing */
- FrameState_Grabbing, /* In the process of being grabbed into */
- FrameState_Done, /* Finished grabbing, but not been synced yet */
- FrameState_Done_Hold, /* Are syncing or reading */
- FrameState_Error, /* Something bad happened while processing */
-};
-
-/*
- * Some frames may contain only even or odd lines. This type
- * specifies what type of deinterlacing is required.
- */
-enum Deinterlace {
- Deinterlace_None=0,
- Deinterlace_FillOddLines,
- Deinterlace_FillEvenLines
-};
-
-#define USBVIDEO_NUMFRAMES 2 /* How many frames we work with */
-#define USBVIDEO_NUMSBUF 2 /* How many URBs linked in a ring */
-
-/* This structure represents one Isoc request - URB and buffer */
-struct usbvideo_sbuf {
- char *data;
- struct urb *urb;
-};
-
-struct usbvideo_frame {
- char *data; /* Frame buffer */
- unsigned long header; /* Significant bits from the header */
-
- videosize_t canvas; /* The canvas (max. image) allocated */
- videosize_t request; /* That's what the application asked for */
- unsigned short palette; /* The desired format */
-
- enum FrameState frameState;/* State of grabbing */
- enum ScanState scanstate; /* State of scanning */
- enum Deinterlace deinterlace;
- int flags; /* USBVIDEO_FRAME_FLAG_xxx bit flags */
-
- int curline; /* Line of frame we're working on */
-
- long seqRead_Length; /* Raw data length of frame */
- long seqRead_Index; /* Amount of data that has been already read */
-
- void *user; /* Additional data that user may need */
-};
-
-/* Statistics that can be overlaid on screen */
-struct usbvideo_statistics {
- unsigned long frame_num; /* Sequential number of the frame */
- unsigned long urb_count; /* How many URBs we received so far */
- unsigned long urb_length; /* Length of last URB */
- unsigned long data_count; /* How many bytes we received */
- unsigned long header_count; /* How many frame headers we found */
- unsigned long iso_skip_count; /* How many empty ISO packets received */
- unsigned long iso_err_count; /* How many bad ISO packets received */
-};
-
-struct usbvideo;
-
-struct uvd {
- struct video_device vdev; /* Must be the first field! */
- struct usb_device *dev;
- struct usbvideo *handle; /* Points back to the struct usbvideo */
- void *user_data; /* Camera-dependent data */
- int user_size; /* Size of that camera-dependent data */
- int debug; /* Debug level for usbvideo */
- unsigned char iface; /* Video interface number */
- unsigned char video_endp;
- unsigned char ifaceAltActive;
- unsigned char ifaceAltInactive; /* Alt settings */
- unsigned long flags; /* FLAGS_USBVIDEO_xxx */
- unsigned long paletteBits; /* Which palettes we accept? */
- unsigned short defaultPalette; /* What palette to use for read() */
- struct mutex lock;
- int user; /* user count for exclusive use */
-
- videosize_t videosize; /* Current setting */
- videosize_t canvas; /* This is the width,height of the V4L canvas */
- int max_frame_size; /* Bytes in one video frame */
-
- int uvd_used; /* Is this structure in use? */
- int streaming; /* Are we streaming Isochronous? */
- int grabbing; /* Are we grabbing? */
- int settingsAdjusted; /* Have we adjusted contrast etc.? */
- int last_error; /* What calamity struck us? */
-
- char *fbuf; /* Videodev buffer area */
- int fbuf_size; /* Videodev buffer size */
-
- int curframe;
- int iso_packet_len; /* Videomode-dependent, saves bus bandwidth */
-
- struct RingQueue dp; /* Isoc data pump */
- struct usbvideo_frame frame[USBVIDEO_NUMFRAMES];
- struct usbvideo_sbuf sbuf[USBVIDEO_NUMSBUF];
-
- volatile int remove_pending; /* If set then about to exit */
-
- struct video_picture vpic, vpic_old; /* Picture settings */
- struct video_capability vcap; /* Video capabilities */
- struct video_channel vchan; /* May be used for tuner support */
- struct usbvideo_statistics stats;
- char videoName[32]; /* Holds name like "video7" */
-};
-
-/*
- * usbvideo callbacks (virtual methods). They are set when usbvideo
- * services are registered. All of these default to NULL, except those
- * that default to usbvideo-provided methods.
- */
-struct usbvideo_cb {
- int (*probe)(struct usb_interface *, const struct usb_device_id *);
- void (*userFree)(struct uvd *);
- void (*disconnect)(struct usb_interface *);
- int (*setupOnOpen)(struct uvd *);
- void (*videoStart)(struct uvd *);
- void (*videoStop)(struct uvd *);
- void (*processData)(struct uvd *, struct usbvideo_frame *);
- void (*postProcess)(struct uvd *, struct usbvideo_frame *);
- void (*adjustPicture)(struct uvd *);
- int (*getFPS)(struct uvd *);
- int (*overlayHook)(struct uvd *, struct usbvideo_frame *);
- int (*getFrame)(struct uvd *, int);
- int (*startDataPump)(struct uvd *uvd);
- void (*stopDataPump)(struct uvd *uvd);
- int (*setVideoMode)(struct uvd *uvd, struct video_window *vw);
-};
-
-struct usbvideo {
- int num_cameras; /* As allocated */
- struct usb_driver usbdrv; /* Interface to the USB stack */
- char drvName[80]; /* Driver name */
- struct mutex lock; /* Mutex protecting camera structures */
- struct usbvideo_cb cb; /* Table of callbacks (virtual methods) */
- struct video_device vdt; /* Video device template */
- struct uvd *cam; /* Array of camera structures */
- struct module *md_module; /* Minidriver module */
-};
-
-
-/*
- * This macro retrieves callback address from the struct uvd object.
- * No validity checks are done here, so be sure to check the
- * callback beforehand with VALID_CALLBACK.
- */
-#define GET_CALLBACK(uvd,cbName) ((uvd)->handle->cb.cbName)
-
-/*
- * This macro returns either callback pointer or NULL. This is safe
- * macro, meaning that most of components of data structures involved
- * may be NULL - this only results in NULL being returned. You may
- * wish to use this macro to make sure that the callback is callable.
- * However keep in mind that those checks take time.
- */
-#define VALID_CALLBACK(uvd,cbName) ((((uvd) != NULL) && \
- ((uvd)->handle != NULL)) ? GET_CALLBACK(uvd,cbName) : NULL)
-
-int RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len);
-int RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n);
-void RingQueue_WakeUpInterruptible(struct RingQueue *rq);
-void RingQueue_Flush(struct RingQueue *rq);
-
-static inline int RingQueue_GetLength(const struct RingQueue *rq)
-{
- return (rq->wi - rq->ri + rq->length) & (rq->length-1);
-}
-
-static inline int RingQueue_GetFreeSpace(const struct RingQueue *rq)
-{
- return rq->length - RingQueue_GetLength(rq);
-}
-
-void usbvideo_DrawLine(
- struct usbvideo_frame *frame,
- int x1, int y1,
- int x2, int y2,
- unsigned char cr, unsigned char cg, unsigned char cb);
-void usbvideo_HexDump(const unsigned char *data, int len);
-void usbvideo_SayAndWait(const char *what);
-void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode);
-
-/* Memory allocation routines */
-unsigned long usbvideo_kvirt_to_pa(unsigned long adr);
-
-int usbvideo_register(
- struct usbvideo **pCams,
- const int num_cams,
- const int num_extra,
- const char *driverName,
- const struct usbvideo_cb *cbTable,
- struct module *md,
- const struct usb_device_id *id_table);
-struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams);
-int usbvideo_RegisterVideoDevice(struct uvd *uvd);
-void usbvideo_Deregister(struct usbvideo **uvt);
-
-int usbvideo_v4l_initialize(struct video_device *dev);
-
-void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame);
-
-/*
- * This code performs bounds checking - use it when working with
- * new formats, or else you may get oopses all over the place.
- * If pixel falls out of bounds then it gets shoved back (as close
- * to place of offence as possible) and is painted bright red.
- *
- * There are two important concepts: frame width, height and
- * V4L canvas width, height. The former is the area requested by
- * the application -for this very frame-. The latter is the largest
- * possible frame that we can serve (we advertise that via V4L ioctl).
- * The frame data is expected to be formatted as lines of length
- * VIDEOSIZE_X(fr->request), total VIDEOSIZE_Y(frame->request) lines.
- */
-static inline void RGB24_PUTPIXEL(
- struct usbvideo_frame *fr,
- int ix, int iy,
- unsigned char vr,
- unsigned char vg,
- unsigned char vb)
-{
- register unsigned char *pf;
- int limiter = 0, mx, my;
- mx = ix;
- my = iy;
- if (mx < 0) {
- mx=0;
- limiter++;
- } else if (mx >= VIDEOSIZE_X((fr)->request)) {
- mx= VIDEOSIZE_X((fr)->request) - 1;
- limiter++;
- }
- if (my < 0) {
- my = 0;
- limiter++;
- } else if (my >= VIDEOSIZE_Y((fr)->request)) {
- my = VIDEOSIZE_Y((fr)->request) - 1;
- limiter++;
- }
- pf = (fr)->data + V4L_BYTES_PER_PIXEL*((iy)*VIDEOSIZE_X((fr)->request) + (ix));
- if (limiter) {
- *pf++ = 0;
- *pf++ = 0;
- *pf++ = 0xFF;
- } else {
- *pf++ = (vb);
- *pf++ = (vg);
- *pf++ = (vr);
- }
-}
-
-#endif /* usbvideo_h */
+++ /dev/null
-/*
- * USB ViCam WebCam driver
- * Copyright (c) 2002 Joe Burks (jburks@wavicle.org),
- * Christopher L Cheney (ccheney@cheney.cx),
- * Pavel Machek (pavel@ucw.cz),
- * John Tyner (jtyner@cs.ucr.edu),
- * Monroe Williams (monroe@pobox.com)
- *
- * Supports 3COM HomeConnect PC Digital WebCam
- * Supports Compro PS39U WebCam
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * This source code is based heavily on the CPiA webcam driver which was
- * written by Peter Pregler, Scott J. Bertin and Johannes Erdfelt
- *
- * Portions of this code were also copied from usbvideo.c
- *
- * Special thanks to the whole team at Sourceforge for help making
- * this driver become a reality. Notably:
- * Andy Armstrong who reverse engineered the color encoding and
- * Pavel Machek and Chris Cheney who worked on reverse engineering the
- * camera controls and wrote the first generation driver.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/videodev.h>
-#include <linux/usb.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/firmware.h>
-#include <linux/ihex.h>
-#include "usbvideo.h"
-
-// #define VICAM_DEBUG
-
-#ifdef VICAM_DEBUG
-#define ADBG(lineno,fmt,args...) printk(fmt, jiffies, __func__, lineno, ##args)
-#define DBG(fmt,args...) ADBG((__LINE__),KERN_DEBUG __FILE__"(%ld):%s (%d):"fmt,##args)
-#else
-#define DBG(fmn,args...) do {} while(0)
-#endif
-
-#define DRIVER_AUTHOR "Joe Burks, jburks@wavicle.org"
-#define DRIVER_DESC "ViCam WebCam Driver"
-
-/* Define these values to match your device */
-#define USB_VICAM_VENDOR_ID 0x04c1
-#define USB_VICAM_PRODUCT_ID 0x009d
-#define USB_COMPRO_VENDOR_ID 0x0602
-#define USB_COMPRO_PRODUCT_ID 0x1001
-
-#define VICAM_BYTES_PER_PIXEL 3
-#define VICAM_MAX_READ_SIZE (512*242+128)
-#define VICAM_MAX_FRAME_SIZE (VICAM_BYTES_PER_PIXEL*320*240)
-#define VICAM_FRAMES 2
-
-#define VICAM_HEADER_SIZE 64
-
-/* rvmalloc / rvfree copied from usbvideo.c
- *
- * Not sure why these are not yet non-statics which I can reference through
- * usbvideo.h the same as it is in 2.4.20. I bet this will get fixed sometime
- * in the future.
- *
-*/
-static void *rvmalloc(unsigned long size)
-{
- void *mem;
- unsigned long adr;
-
- size = PAGE_ALIGN(size);
- mem = vmalloc_32(size);
- if (!mem)
- return NULL;
-
- memset(mem, 0, size); /* Clear the ram out, no junk to the user */
- adr = (unsigned long) mem;
- while (size > 0) {
- SetPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
-
- return mem;
-}
-
-static void rvfree(void *mem, unsigned long size)
-{
- unsigned long adr;
-
- if (!mem)
- return;
-
- adr = (unsigned long) mem;
- while ((long) size > 0) {
- ClearPageReserved(vmalloc_to_page((void *)adr));
- adr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
- vfree(mem);
-}
-
-struct vicam_camera {
- u16 shutter_speed; // capture shutter speed
- u16 gain; // capture gain
-
- u8 *raw_image; // raw data captured from the camera
- u8 *framebuf; // processed data in RGB24 format
- u8 *cntrlbuf; // area used to send control msgs
-
- struct video_device vdev; // v4l video device
- struct usb_device *udev; // usb device
-
- /* guard against simultaneous accesses to the camera */
- struct mutex cam_lock;
-
- int is_initialized;
- u8 open_count;
- u8 bulkEndpoint;
- int needsDummyRead;
-};
-
-static int vicam_probe( struct usb_interface *intf, const struct usb_device_id *id);
-static void vicam_disconnect(struct usb_interface *intf);
-static void read_frame(struct vicam_camera *cam, int framenum);
-static void vicam_decode_color(const u8 *, u8 *);
-
-static int __send_control_msg(struct vicam_camera *cam,
- u8 request,
- u16 value,
- u16 index,
- unsigned char *cp,
- u16 size)
-{
- int status;
-
- /* cp must be memory that has been allocated by kmalloc */
-
- status = usb_control_msg(cam->udev,
- usb_sndctrlpipe(cam->udev, 0),
- request,
- USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, value, index,
- cp, size, 1000);
-
- status = min(status, 0);
-
- if (status < 0) {
- printk(KERN_INFO "Failed sending control message, error %d.\n",
- status);
- }
-
- return status;
-}
-
-static int send_control_msg(struct vicam_camera *cam,
- u8 request,
- u16 value,
- u16 index,
- unsigned char *cp,
- u16 size)
-{
- int status = -ENODEV;
- mutex_lock(&cam->cam_lock);
- if (cam->udev) {
- status = __send_control_msg(cam, request, value,
- index, cp, size);
- }
- mutex_unlock(&cam->cam_lock);
- return status;
-}
-static int
-initialize_camera(struct vicam_camera *cam)
-{
- int err;
- const struct ihex_binrec *rec;
- const struct firmware *uninitialized_var(fw);
-
- err = request_ihex_firmware(&fw, "vicam/firmware.fw", &cam->udev->dev);
- if (err) {
- printk(KERN_ERR "Failed to load \"vicam/firmware.fw\": %d\n",
- err);
- return err;
- }
-
- for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) {
- memcpy(cam->cntrlbuf, rec->data, be16_to_cpu(rec->len));
-
- err = send_control_msg(cam, 0xff, 0, 0,
- cam->cntrlbuf, be16_to_cpu(rec->len));
- if (err)
- break;
- }
-
- release_firmware(fw);
-
- return err;
-}
-
-static int
-set_camera_power(struct vicam_camera *cam, int state)
-{
- int status;
-
- if ((status = send_control_msg(cam, 0x50, state, 0, NULL, 0)) < 0)
- return status;
-
- if (state) {
- send_control_msg(cam, 0x55, 1, 0, NULL, 0);
- }
-
- return 0;
-}
-
-static long
-vicam_ioctl(struct file *file, unsigned int ioctlnr, unsigned long arg)
-{
- void __user *user_arg = (void __user *)arg;
- struct vicam_camera *cam = file->private_data;
- long retval = 0;
-
- if (!cam)
- return -ENODEV;
-
- switch (ioctlnr) {
- /* query capabilities */
- case VIDIOCGCAP:
- {
- struct video_capability b;
-
- DBG("VIDIOCGCAP\n");
- memset(&b, 0, sizeof(b));
- strcpy(b.name, "ViCam-based Camera");
- b.type = VID_TYPE_CAPTURE;
- b.channels = 1;
- b.audios = 0;
- b.maxwidth = 320; /* VIDEOSIZE_CIF */
- b.maxheight = 240;
- b.minwidth = 320; /* VIDEOSIZE_48_48 */
- b.minheight = 240;
-
- if (copy_to_user(user_arg, &b, sizeof(b)))
- retval = -EFAULT;
-
- break;
- }
- /* get/set video source - we are a camera and nothing else */
- case VIDIOCGCHAN:
- {
- struct video_channel v;
-
- DBG("VIDIOCGCHAN\n");
- if (copy_from_user(&v, user_arg, sizeof(v))) {
- retval = -EFAULT;
- break;
- }
- if (v.channel != 0) {
- retval = -EINVAL;
- break;
- }
-
- v.channel = 0;
- strcpy(v.name, "Camera");
- v.tuners = 0;
- v.flags = 0;
- v.type = VIDEO_TYPE_CAMERA;
- v.norm = 0;
-
- if (copy_to_user(user_arg, &v, sizeof(v)))
- retval = -EFAULT;
- break;
- }
-
- case VIDIOCSCHAN:
- {
- int v;
-
- if (copy_from_user(&v, user_arg, sizeof(v)))
- retval = -EFAULT;
- DBG("VIDIOCSCHAN %d\n", v);
-
- if (retval == 0 && v != 0)
- retval = -EINVAL;
-
- break;
- }
-
- /* image properties */
- case VIDIOCGPICT:
- {
- struct video_picture vp;
- DBG("VIDIOCGPICT\n");
- memset(&vp, 0, sizeof (struct video_picture));
- vp.brightness = cam->gain << 8;
- vp.depth = 24;
- vp.palette = VIDEO_PALETTE_RGB24;
- if (copy_to_user(user_arg, &vp, sizeof (struct video_picture)))
- retval = -EFAULT;
- break;
- }
-
- case VIDIOCSPICT:
- {
- struct video_picture vp;
-
- if (copy_from_user(&vp, user_arg, sizeof(vp))) {
- retval = -EFAULT;
- break;
- }
-
- DBG("VIDIOCSPICT depth = %d, pal = %d\n", vp.depth,
- vp.palette);
-
- cam->gain = vp.brightness >> 8;
-
- if (vp.depth != 24
- || vp.palette != VIDEO_PALETTE_RGB24)
- retval = -EINVAL;
-
- break;
- }
-
- /* get/set capture window */
- case VIDIOCGWIN:
- {
- struct video_window vw;
- vw.x = 0;
- vw.y = 0;
- vw.width = 320;
- vw.height = 240;
- vw.chromakey = 0;
- vw.flags = 0;
- vw.clips = NULL;
- vw.clipcount = 0;
-
- DBG("VIDIOCGWIN\n");
-
- if (copy_to_user(user_arg, (void *)&vw, sizeof(vw)))
- retval = -EFAULT;
-
- // I'm not sure what the deal with a capture window is, it is very poorly described
- // in the doc. So I won't support it now.
- break;
- }
-
- case VIDIOCSWIN:
- {
-
- struct video_window vw;
-
- if (copy_from_user(&vw, user_arg, sizeof(vw))) {
- retval = -EFAULT;
- break;
- }
-
- DBG("VIDIOCSWIN %d x %d\n", vw.width, vw.height);
-
- if ( vw.width != 320 || vw.height != 240 )
- retval = -EFAULT;
-
- break;
- }
-
- /* mmap interface */
- case VIDIOCGMBUF:
- {
- struct video_mbuf vm;
- int i;
-
- DBG("VIDIOCGMBUF\n");
- memset(&vm, 0, sizeof (vm));
- vm.size =
- VICAM_MAX_FRAME_SIZE * VICAM_FRAMES;
- vm.frames = VICAM_FRAMES;
- for (i = 0; i < VICAM_FRAMES; i++)
- vm.offsets[i] = VICAM_MAX_FRAME_SIZE * i;
-
- if (copy_to_user(user_arg, (void *)&vm, sizeof(vm)))
- retval = -EFAULT;
-
- break;
- }
-
- case VIDIOCMCAPTURE:
- {
- struct video_mmap vm;
- // int video_size;
-
- if (copy_from_user((void *)&vm, user_arg, sizeof(vm))) {
- retval = -EFAULT;
- break;
- }
-
- DBG("VIDIOCMCAPTURE frame=%d, height=%d, width=%d, format=%d.\n",vm.frame,vm.width,vm.height,vm.format);
-
- if ( vm.frame >= VICAM_FRAMES || vm.format != VIDEO_PALETTE_RGB24 )
- retval = -EINVAL;
-
- // in theory right here we'd start the image capturing
- // (fill in a bulk urb and submit it asynchronously)
- //
- // Instead we're going to do a total hack job for now and
- // retrieve the frame in VIDIOCSYNC
-
- break;
- }
-
- case VIDIOCSYNC:
- {
- int frame;
-
- if (copy_from_user((void *)&frame, user_arg, sizeof(int))) {
- retval = -EFAULT;
- break;
- }
- DBG("VIDIOCSYNC: %d\n", frame);
-
- read_frame(cam, frame);
- vicam_decode_color(cam->raw_image,
- cam->framebuf +
- frame * VICAM_MAX_FRAME_SIZE );
-
- break;
- }
-
- /* pointless to implement overlay with this camera */
- case VIDIOCCAPTURE:
- case VIDIOCGFBUF:
- case VIDIOCSFBUF:
- case VIDIOCKEY:
- retval = -EINVAL;
- break;
-
- /* tuner interface - we have none */
- case VIDIOCGTUNER:
- case VIDIOCSTUNER:
- case VIDIOCGFREQ:
- case VIDIOCSFREQ:
- retval = -EINVAL;
- break;
-
- /* audio interface - we have none */
- case VIDIOCGAUDIO:
- case VIDIOCSAUDIO:
- retval = -EINVAL;
- break;
- default:
- retval = -ENOIOCTLCMD;
- break;
- }
-
- return retval;
-}
-
-static int
-vicam_open(struct file *file)
-{
- struct vicam_camera *cam = video_drvdata(file);
-
- DBG("open\n");
-
- if (!cam) {
- printk(KERN_ERR
- "vicam video_device improperly initialized");
- return -EINVAL;
- }
-
- /* cam_lock/open_count protects us from simultaneous opens
- * ... for now. we probably shouldn't rely on this fact forever.
- */
-
- mutex_lock(&cam->cam_lock);
- if (cam->open_count > 0) {
- printk(KERN_INFO
- "vicam_open called on already opened camera");
- mutex_unlock(&cam->cam_lock);
- return -EBUSY;
- }
-
- cam->raw_image = kmalloc(VICAM_MAX_READ_SIZE, GFP_KERNEL);
- if (!cam->raw_image) {
- mutex_unlock(&cam->cam_lock);
- return -ENOMEM;
- }
-
- cam->framebuf = rvmalloc(VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
- if (!cam->framebuf) {
- kfree(cam->raw_image);
- mutex_unlock(&cam->cam_lock);
- return -ENOMEM;
- }
-
- cam->cntrlbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (!cam->cntrlbuf) {
- kfree(cam->raw_image);
- rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
- mutex_unlock(&cam->cam_lock);
- return -ENOMEM;
- }
-
- cam->needsDummyRead = 1;
- cam->open_count++;
-
- file->private_data = cam;
- mutex_unlock(&cam->cam_lock);
-
-
- // First upload firmware, then turn the camera on
-
- if (!cam->is_initialized) {
- initialize_camera(cam);
-
- cam->is_initialized = 1;
- }
-
- set_camera_power(cam, 1);
-
- return 0;
-}
-
-static int
-vicam_close(struct file *file)
-{
- struct vicam_camera *cam = file->private_data;
- int open_count;
- struct usb_device *udev;
-
- DBG("close\n");
-
- /* it's not the end of the world if
- * we fail to turn the camera off.
- */
-
- set_camera_power(cam, 0);
-
- kfree(cam->raw_image);
- rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
- kfree(cam->cntrlbuf);
-
- mutex_lock(&cam->cam_lock);
-
- cam->open_count--;
- open_count = cam->open_count;
- udev = cam->udev;
-
- mutex_unlock(&cam->cam_lock);
-
- if (!open_count && !udev) {
- kfree(cam);
- }
-
- return 0;
-}
-
-static void vicam_decode_color(const u8 *data, u8 *rgb)
-{
- /* vicam_decode_color - Convert from Vicam Y-Cr-Cb to RGB
- * Copyright (C) 2002 Monroe Williams (monroe@pobox.com)
- */
-
- int i, prevY, nextY;
-
- prevY = 512;
- nextY = 512;
-
- data += VICAM_HEADER_SIZE;
-
- for( i = 0; i < 240; i++, data += 512 ) {
- const int y = ( i * 242 ) / 240;
-
- int j, prevX, nextX;
- int Y, Cr, Cb;
-
- if ( y == 242 - 1 ) {
- nextY = -512;
- }
-
- prevX = 1;
- nextX = 1;
-
- for ( j = 0; j < 320; j++, rgb += 3 ) {
- const int x = ( j * 512 ) / 320;
- const u8 * const src = &data[x];
-
- if ( x == 512 - 1 ) {
- nextX = -1;
- }
-
- Cr = ( src[prevX] - src[0] ) +
- ( src[nextX] - src[0] );
- Cr /= 2;
-
- Cb = ( src[prevY] - src[prevX + prevY] ) +
- ( src[prevY] - src[nextX + prevY] ) +
- ( src[nextY] - src[prevX + nextY] ) +
- ( src[nextY] - src[nextX + nextY] );
- Cb /= 4;
-
- Y = 1160 * ( src[0] + ( Cr / 2 ) - 16 );
-
- if ( i & 1 ) {
- int Ct = Cr;
- Cr = Cb;
- Cb = Ct;
- }
-
- if ( ( x ^ i ) & 1 ) {
- Cr = -Cr;
- Cb = -Cb;
- }
-
- rgb[0] = clamp( ( ( Y + ( 2017 * Cb ) ) +
- 500 ) / 900, 0, 255 );
- rgb[1] = clamp( ( ( Y - ( 392 * Cb ) -
- ( 813 * Cr ) ) +
- 500 ) / 1000, 0, 255 );
- rgb[2] = clamp( ( ( Y + ( 1594 * Cr ) ) +
- 500 ) / 1300, 0, 255 );
-
- prevX = -1;
- }
-
- prevY = -512;
- }
-}
-
-static void
-read_frame(struct vicam_camera *cam, int framenum)
-{
- unsigned char *request = cam->cntrlbuf;
- int realShutter;
- int n;
- int actual_length;
-
- if (cam->needsDummyRead) {
- cam->needsDummyRead = 0;
- read_frame(cam, framenum);
- }
-
- memset(request, 0, 16);
- request[0] = cam->gain; // 0 = 0% gain, FF = 100% gain
-
- request[1] = 0; // 512x242 capture
-
- request[2] = 0x90; // the function of these two bytes
- request[3] = 0x07; // is not yet understood
-
- if (cam->shutter_speed > 60) {
- // Short exposure
- realShutter =
- ((-15631900 / cam->shutter_speed) + 260533) / 1000;
- request[4] = realShutter & 0xFF;
- request[5] = (realShutter >> 8) & 0xFF;
- request[6] = 0x03;
- request[7] = 0x01;
- } else {
- // Long exposure
- realShutter = 15600 / cam->shutter_speed - 1;
- request[4] = 0;
- request[5] = 0;
- request[6] = realShutter & 0xFF;
- request[7] = realShutter >> 8;
- }
-
- // Per John Markus Bjørndalen, byte at index 8 causes problems if it isn't 0
- request[8] = 0;
- // bytes 9-15 do not seem to affect exposure or image quality
-
- mutex_lock(&cam->cam_lock);
-
- if (!cam->udev) {
- goto done;
- }
-
- n = __send_control_msg(cam, 0x51, 0x80, 0, request, 16);
-
- if (n < 0) {
- printk(KERN_ERR
- " Problem sending frame capture control message");
- goto done;
- }
-
- n = usb_bulk_msg(cam->udev,
- usb_rcvbulkpipe(cam->udev, cam->bulkEndpoint),
- cam->raw_image,
- 512 * 242 + 128, &actual_length, 10000);
-
- if (n < 0) {
- printk(KERN_ERR "Problem during bulk read of frame data: %d\n",
- n);
- }
-
- done:
- mutex_unlock(&cam->cam_lock);
-}
-
-static ssize_t
-vicam_read( struct file *file, char __user *buf, size_t count, loff_t *ppos )
-{
- struct vicam_camera *cam = file->private_data;
-
- DBG("read %d bytes.\n", (int) count);
-
- if (*ppos >= VICAM_MAX_FRAME_SIZE) {
- *ppos = 0;
- return 0;
- }
-
- if (*ppos == 0) {
- read_frame(cam, 0);
- vicam_decode_color(cam->raw_image,
- cam->framebuf +
- 0 * VICAM_MAX_FRAME_SIZE);
- }
-
- count = min_t(size_t, count, VICAM_MAX_FRAME_SIZE - *ppos);
-
- if (copy_to_user(buf, &cam->framebuf[*ppos], count)) {
- count = -EFAULT;
- } else {
- *ppos += count;
- }
-
- if (count == VICAM_MAX_FRAME_SIZE) {
- *ppos = 0;
- }
-
- return count;
-}
-
-
-static int
-vicam_mmap(struct file *file, struct vm_area_struct *vma)
-{
- // TODO: allocate the raw frame buffer if necessary
- unsigned long page, pos;
- unsigned long start = vma->vm_start;
- unsigned long size = vma->vm_end-vma->vm_start;
- struct vicam_camera *cam = file->private_data;
-
- if (!cam)
- return -ENODEV;
-
- DBG("vicam_mmap: %ld\n", size);
-
- /* We let mmap allocate as much as it wants because Linux was adding 2048 bytes
- * to the size the application requested for mmap and it was screwing apps up.
- if (size > VICAM_FRAMES*VICAM_MAX_FRAME_SIZE)
- return -EINVAL;
- */
-
- pos = (unsigned long)cam->framebuf;
- while (size > 0) {
- page = vmalloc_to_pfn((void *)pos);
- if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
- return -EAGAIN;
-
- start += PAGE_SIZE;
- pos += PAGE_SIZE;
- if (size > PAGE_SIZE)
- size -= PAGE_SIZE;
- else
- size = 0;
- }
-
- return 0;
-}
-
-static const struct v4l2_file_operations vicam_fops = {
- .owner = THIS_MODULE,
- .open = vicam_open,
- .release = vicam_close,
- .read = vicam_read,
- .mmap = vicam_mmap,
- .ioctl = vicam_ioctl,
-};
-
-static struct video_device vicam_template = {
- .name = "ViCam-based USB Camera",
- .fops = &vicam_fops,
- .release = video_device_release_empty,
-};
-
-/* table of devices that work with this driver */
-static struct usb_device_id vicam_table[] = {
- {USB_DEVICE(USB_VICAM_VENDOR_ID, USB_VICAM_PRODUCT_ID)},
- {USB_DEVICE(USB_COMPRO_VENDOR_ID, USB_COMPRO_PRODUCT_ID)},
- {} /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, vicam_table);
-
-static struct usb_driver vicam_driver = {
- .name = "vicam",
- .probe = vicam_probe,
- .disconnect = vicam_disconnect,
- .id_table = vicam_table
-};
-
-/**
- * vicam_probe
- * @intf: the interface
- * @id: the device id
- *
- * Called by the usb core when a new device is connected that it thinks
- * this driver might be interested in.
- */
-static int
-vicam_probe( struct usb_interface *intf, const struct usb_device_id *id)
-{
- struct usb_device *dev = interface_to_usbdev(intf);
- int bulkEndpoint = 0;
- const struct usb_host_interface *interface;
- const struct usb_endpoint_descriptor *endpoint;
- struct vicam_camera *cam;
-
- printk(KERN_INFO "ViCam based webcam connected\n");
-
- interface = intf->cur_altsetting;
-
- DBG(KERN_DEBUG "Interface %d. has %u. endpoints!\n",
- interface->desc.bInterfaceNumber, (unsigned) (interface->desc.bNumEndpoints));
- endpoint = &interface->endpoint[0].desc;
-
- if (usb_endpoint_is_bulk_in(endpoint)) {
- /* we found a bulk in endpoint */
- bulkEndpoint = endpoint->bEndpointAddress;
- } else {
- printk(KERN_ERR
- "No bulk in endpoint was found ?! (this is bad)\n");
- }
-
- if ((cam =
- kzalloc(sizeof (struct vicam_camera), GFP_KERNEL)) == NULL) {
- printk(KERN_WARNING
- "could not allocate kernel memory for vicam_camera struct\n");
- return -ENOMEM;
- }
-
-
- cam->shutter_speed = 15;
-
- mutex_init(&cam->cam_lock);
-
- memcpy(&cam->vdev, &vicam_template, sizeof(vicam_template));
- video_set_drvdata(&cam->vdev, cam);
-
- cam->udev = dev;
- cam->bulkEndpoint = bulkEndpoint;
-
- if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) < 0) {
- kfree(cam);
- printk(KERN_WARNING "video_register_device failed\n");
- return -EIO;
- }
-
- printk(KERN_INFO "ViCam webcam driver now controlling device %s\n",
- video_device_node_name(&cam->vdev));
-
- usb_set_intfdata (intf, cam);
-
- return 0;
-}
-
-static void
-vicam_disconnect(struct usb_interface *intf)
-{
- int open_count;
- struct vicam_camera *cam = usb_get_intfdata (intf);
- usb_set_intfdata (intf, NULL);
-
- /* we must unregister the device before taking its
- * cam_lock. This is because the video open call
- * holds the same lock as video unregister. if we
- * unregister inside of the cam_lock and open also
- * uses the cam_lock, we get deadlock.
- */
-
- video_unregister_device(&cam->vdev);
-
- /* stop the camera from being used */
-
- mutex_lock(&cam->cam_lock);
-
- /* mark the camera as gone */
-
- cam->udev = NULL;
-
- /* the only thing left to do is synchronize with
- * our close/release function on who should release
- * the camera memory. if there are any users using the
- * camera, it's their job. if there are no users,
- * it's ours.
- */
-
- open_count = cam->open_count;
-
- mutex_unlock(&cam->cam_lock);
-
- if (!open_count) {
- kfree(cam);
- }
-
- printk(KERN_DEBUG "ViCam-based WebCam disconnected\n");
-}
-
-/*
- */
-static int __init
-usb_vicam_init(void)
-{
- int retval;
- DBG(KERN_INFO "ViCam-based WebCam driver startup\n");
- retval = usb_register(&vicam_driver);
- if (retval)
- printk(KERN_WARNING "usb_register failed!\n");
- return retval;
-}
-
-static void __exit
-usb_vicam_exit(void)
-{
- DBG(KERN_INFO
- "ViCam-based WebCam driver shutdown\n");
-
- usb_deregister(&vicam_driver);
-}
-
-module_init(usb_vicam_init);
-module_exit(usb_vicam_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("vicam/firmware.fw");
source "drivers/staging/stradis/Kconfig"
+source "drivers/staging/usbvideo/Kconfig"
+
source "drivers/staging/usbip/Kconfig"
source "drivers/staging/winbond/Kconfig"
obj-$(CONFIG_VIDEO_TM6000) += tm6000/
obj-$(CONFIG_VIDEO_CPIA) += cpia/
obj-$(CONFIG_VIDEO_STRADIS) += stradis/
+obj-$(CONFIG_USB_VICAM) += usbvideo/
obj-$(CONFIG_LIRC_STAGING) += lirc/
obj-$(CONFIG_USB_IP_COMMON) += usbip/
obj-$(CONFIG_W35UND) += winbond/
--- /dev/null
+config VIDEO_USBVIDEO
+ tristate
+
+config USB_VICAM
+ tristate "USB 3com HomeConnect (aka vicam) support (DEPRECATED)"
+ depends on VIDEO_V4L1 && EXPERIMENTAL
+ select VIDEO_USBVIDEO
+ ---help---
+ Say Y here if you have 3com homeconnect camera (vicam).
+
+ This driver uses the deprecated V4L1 API and will be removed in
+ 2.6.39, unless someone converts it to the V4L2 API.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vicam.
--- /dev/null
+obj-$(CONFIG_VIDEO_USBVIDEO) += usbvideo.o
+obj-$(CONFIG_USB_VICAM) += vicam.o
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+
+#include "usbvideo.h"
+
+#if defined(MAP_NR)
+#define virt_to_page(v) MAP_NR(v) /* Kernels 2.2.x */
+#endif
+
+static int video_nr = -1;
+module_param(video_nr, int, 0);
+
+/*
+ * Local prototypes.
+ */
+static void usbvideo_Disconnect(struct usb_interface *intf);
+static void usbvideo_CameraRelease(struct uvd *uvd);
+
+static long usbvideo_v4l_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg);
+static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma);
+static int usbvideo_v4l_open(struct file *file);
+static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos);
+static int usbvideo_v4l_close(struct file *file);
+
+static int usbvideo_StartDataPump(struct uvd *uvd);
+static void usbvideo_StopDataPump(struct uvd *uvd);
+static int usbvideo_GetFrame(struct uvd *uvd, int frameNum);
+static int usbvideo_NewFrame(struct uvd *uvd, int framenum);
+static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
+ struct usbvideo_frame *frame);
+
+/*******************************/
+/* Memory management functions */
+/*******************************/
+static void *usbvideo_rvmalloc(unsigned long size)
+{
+ void *mem;
+ unsigned long adr;
+
+ size = PAGE_ALIGN(size);
+ mem = vmalloc_32(size);
+ if (!mem)
+ return NULL;
+
+ memset(mem, 0, size); /* Clear the ram out, no junk to the user */
+ adr = (unsigned long) mem;
+ while (size > 0) {
+ SetPageReserved(vmalloc_to_page((void *)adr));
+ adr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+
+ return mem;
+}
+
+static void usbvideo_rvfree(void *mem, unsigned long size)
+{
+ unsigned long adr;
+
+ if (!mem)
+ return;
+
+ adr = (unsigned long) mem;
+ while ((long) size > 0) {
+ ClearPageReserved(vmalloc_to_page((void *)adr));
+ adr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+ vfree(mem);
+}
+
+static void RingQueue_Initialize(struct RingQueue *rq)
+{
+ assert(rq != NULL);
+ init_waitqueue_head(&rq->wqh);
+}
+
+static void RingQueue_Allocate(struct RingQueue *rq, int rqLen)
+{
+ /* Make sure the requested size is a power of 2 and
+ round up if necessary. This allows index wrapping
+ using masks rather than modulo */
+
+ int i = 1;
+ assert(rq != NULL);
+ assert(rqLen > 0);
+
+ while(rqLen >> i)
+ i++;
+ if(rqLen != 1 << (i-1))
+ rqLen = 1 << i;
+
+ rq->length = rqLen;
+ rq->ri = rq->wi = 0;
+ rq->queue = usbvideo_rvmalloc(rq->length);
+ assert(rq->queue != NULL);
+}
+
+static int RingQueue_IsAllocated(const struct RingQueue *rq)
+{
+ if (rq == NULL)
+ return 0;
+ return (rq->queue != NULL) && (rq->length > 0);
+}
+
+static void RingQueue_Free(struct RingQueue *rq)
+{
+ assert(rq != NULL);
+ if (RingQueue_IsAllocated(rq)) {
+ usbvideo_rvfree(rq->queue, rq->length);
+ rq->queue = NULL;
+ rq->length = 0;
+ }
+}
+
+int RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len)
+{
+ int rql, toread;
+
+ assert(rq != NULL);
+ assert(dst != NULL);
+
+ rql = RingQueue_GetLength(rq);
+ if(!rql)
+ return 0;
+
+ /* Clip requested length to available data */
+ if(len > rql)
+ len = rql;
+
+ toread = len;
+ if(rq->ri > rq->wi) {
+ /* Read data from tail */
+ int read = (toread < (rq->length - rq->ri)) ? toread : rq->length - rq->ri;
+ memcpy(dst, rq->queue + rq->ri, read);
+ toread -= read;
+ dst += read;
+ rq->ri = (rq->ri + read) & (rq->length-1);
+ }
+ if(toread) {
+ /* Read data from head */
+ memcpy(dst, rq->queue + rq->ri, toread);
+ rq->ri = (rq->ri + toread) & (rq->length-1);
+ }
+ return len;
+}
+
+EXPORT_SYMBOL(RingQueue_Dequeue);
+
+int RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n)
+{
+ int enqueued = 0;
+
+ assert(rq != NULL);
+ assert(cdata != NULL);
+ assert(rq->length > 0);
+ while (n > 0) {
+ int m, q_avail;
+
+ /* Calculate the largest chunk that fits the tail of the ring */
+ q_avail = rq->length - rq->wi;
+ if (q_avail <= 0) {
+ rq->wi = 0;
+ q_avail = rq->length;
+ }
+ m = n;
+ assert(q_avail > 0);
+ if (m > q_avail)
+ m = q_avail;
+
+ memcpy(rq->queue + rq->wi, cdata, m);
+ RING_QUEUE_ADVANCE_INDEX(rq, wi, m);
+ cdata += m;
+ enqueued += m;
+ n -= m;
+ }
+ return enqueued;
+}
+
+EXPORT_SYMBOL(RingQueue_Enqueue);
+
+static void RingQueue_InterruptibleSleepOn(struct RingQueue *rq)
+{
+ assert(rq != NULL);
+ interruptible_sleep_on(&rq->wqh);
+}
+
+void RingQueue_WakeUpInterruptible(struct RingQueue *rq)
+{
+ assert(rq != NULL);
+ if (waitqueue_active(&rq->wqh))
+ wake_up_interruptible(&rq->wqh);
+}
+
+EXPORT_SYMBOL(RingQueue_WakeUpInterruptible);
+
+void RingQueue_Flush(struct RingQueue *rq)
+{
+ assert(rq != NULL);
+ rq->ri = 0;
+ rq->wi = 0;
+}
+
+EXPORT_SYMBOL(RingQueue_Flush);
+
+
+/*
+ * usbvideo_VideosizeToString()
+ *
+ * This procedure converts given videosize value to readable string.
+ *
+ * History:
+ * 07-Aug-2000 Created.
+ * 19-Oct-2000 Reworked for usbvideo module.
+ */
+static void usbvideo_VideosizeToString(char *buf, int bufLen, videosize_t vs)
+{
+ char tmp[40];
+ int n;
+
+ n = 1 + sprintf(tmp, "%ldx%ld", VIDEOSIZE_X(vs), VIDEOSIZE_Y(vs));
+ assert(n < sizeof(tmp));
+ if ((buf == NULL) || (bufLen < n))
+ err("usbvideo_VideosizeToString: buffer is too small.");
+ else
+ memmove(buf, tmp, n);
+}
+
+/*
+ * usbvideo_OverlayChar()
+ *
+ * History:
+ * 01-Feb-2000 Created.
+ */
+static void usbvideo_OverlayChar(struct uvd *uvd, struct usbvideo_frame *frame,
+ int x, int y, int ch)
+{
+ static const unsigned short digits[16] = {
+ 0xF6DE, /* 0 */
+ 0x2492, /* 1 */
+ 0xE7CE, /* 2 */
+ 0xE79E, /* 3 */
+ 0xB792, /* 4 */
+ 0xF39E, /* 5 */
+ 0xF3DE, /* 6 */
+ 0xF492, /* 7 */
+ 0xF7DE, /* 8 */
+ 0xF79E, /* 9 */
+ 0x77DA, /* a */
+ 0xD75C, /* b */
+ 0xF24E, /* c */
+ 0xD6DC, /* d */
+ 0xF34E, /* e */
+ 0xF348 /* f */
+ };
+ unsigned short digit;
+ int ix, iy;
+ int value;
+
+ if ((uvd == NULL) || (frame == NULL))
+ return;
+
+ value = hex_to_bin(ch);
+ if (value < 0)
+ return;
+ digit = digits[value];
+
+ for (iy=0; iy < 5; iy++) {
+ for (ix=0; ix < 3; ix++) {
+ if (digit & 0x8000) {
+ if (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24)) {
+/* TODO */ RGB24_PUTPIXEL(frame, x+ix, y+iy, 0xFF, 0xFF, 0xFF);
+ }
+ }
+ digit = digit << 1;
+ }
+ }
+}
+
+/*
+ * usbvideo_OverlayString()
+ *
+ * History:
+ * 01-Feb-2000 Created.
+ */
+static void usbvideo_OverlayString(struct uvd *uvd, struct usbvideo_frame *frame,
+ int x, int y, const char *str)
+{
+ while (*str) {
+ usbvideo_OverlayChar(uvd, frame, x, y, *str);
+ str++;
+ x += 4; /* 3 pixels character + 1 space */
+ }
+}
+
+/*
+ * usbvideo_OverlayStats()
+ *
+ * Overlays important debugging information.
+ *
+ * History:
+ * 01-Feb-2000 Created.
+ */
+static void usbvideo_OverlayStats(struct uvd *uvd, struct usbvideo_frame *frame)
+{
+ const int y_diff = 8;
+ char tmp[16];
+ int x = 10, y=10;
+ long i, j, barLength;
+ const int qi_x1 = 60, qi_y1 = 10;
+ const int qi_x2 = VIDEOSIZE_X(frame->request) - 10, qi_h = 10;
+
+ /* Call the user callback, see if we may proceed after that */
+ if (VALID_CALLBACK(uvd, overlayHook)) {
+ if (GET_CALLBACK(uvd, overlayHook)(uvd, frame) < 0)
+ return;
+ }
+
+ /*
+ * We draw a (mostly) hollow rectangle with qi_xxx coordinates.
+ * Left edge symbolizes the queue index 0; right edge symbolizes
+ * the full capacity of the queue.
+ */
+ barLength = qi_x2 - qi_x1 - 2;
+ if ((barLength > 10) && (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24))) {
+/* TODO */ long u_lo, u_hi, q_used;
+ long m_ri, m_wi, m_lo, m_hi;
+
+ /*
+ * Determine fill zones (used areas of the queue):
+ * 0 xxxxxxx u_lo ...... uvd->dp.ri xxxxxxxx u_hi ..... uvd->dp.length
+ *
+ * if u_lo < 0 then there is no first filler.
+ */
+
+ q_used = RingQueue_GetLength(&uvd->dp);
+ if ((uvd->dp.ri + q_used) >= uvd->dp.length) {
+ u_hi = uvd->dp.length;
+ u_lo = (q_used + uvd->dp.ri) & (uvd->dp.length-1);
+ } else {
+ u_hi = (q_used + uvd->dp.ri);
+ u_lo = -1;
+ }
+
+ /* Convert byte indices into screen units */
+ m_ri = qi_x1 + ((barLength * uvd->dp.ri) / uvd->dp.length);
+ m_wi = qi_x1 + ((barLength * uvd->dp.wi) / uvd->dp.length);
+ m_lo = (u_lo > 0) ? (qi_x1 + ((barLength * u_lo) / uvd->dp.length)) : -1;
+ m_hi = qi_x1 + ((barLength * u_hi) / uvd->dp.length);
+
+ for (j=qi_y1; j < (qi_y1 + qi_h); j++) {
+ for (i=qi_x1; i < qi_x2; i++) {
+ /* Draw border lines */
+ if ((j == qi_y1) || (j == (qi_y1 + qi_h - 1)) ||
+ (i == qi_x1) || (i == (qi_x2 - 1))) {
+ RGB24_PUTPIXEL(frame, i, j, 0xFF, 0xFF, 0xFF);
+ continue;
+ }
+ /* For all other points the Y coordinate does not matter */
+ if ((i >= m_ri) && (i <= (m_ri + 3))) {
+ RGB24_PUTPIXEL(frame, i, j, 0x00, 0xFF, 0x00);
+ } else if ((i >= m_wi) && (i <= (m_wi + 3))) {
+ RGB24_PUTPIXEL(frame, i, j, 0xFF, 0x00, 0x00);
+ } else if ((i < m_lo) || ((i > m_ri) && (i < m_hi)))
+ RGB24_PUTPIXEL(frame, i, j, 0x00, 0x00, 0xFF);
+ }
+ }
+ }
+
+ sprintf(tmp, "%8lx", uvd->stats.frame_num);
+ usbvideo_OverlayString(uvd, frame, x, y, tmp);
+ y += y_diff;
+
+ sprintf(tmp, "%8lx", uvd->stats.urb_count);
+ usbvideo_OverlayString(uvd, frame, x, y, tmp);
+ y += y_diff;
+
+ sprintf(tmp, "%8lx", uvd->stats.urb_length);
+ usbvideo_OverlayString(uvd, frame, x, y, tmp);
+ y += y_diff;
+
+ sprintf(tmp, "%8lx", uvd->stats.data_count);
+ usbvideo_OverlayString(uvd, frame, x, y, tmp);
+ y += y_diff;
+
+ sprintf(tmp, "%8lx", uvd->stats.header_count);
+ usbvideo_OverlayString(uvd, frame, x, y, tmp);
+ y += y_diff;
+
+ sprintf(tmp, "%8lx", uvd->stats.iso_skip_count);
+ usbvideo_OverlayString(uvd, frame, x, y, tmp);
+ y += y_diff;
+
+ sprintf(tmp, "%8lx", uvd->stats.iso_err_count);
+ usbvideo_OverlayString(uvd, frame, x, y, tmp);
+ y += y_diff;
+
+ sprintf(tmp, "%8x", uvd->vpic.colour);
+ usbvideo_OverlayString(uvd, frame, x, y, tmp);
+ y += y_diff;
+
+ sprintf(tmp, "%8x", uvd->vpic.hue);
+ usbvideo_OverlayString(uvd, frame, x, y, tmp);
+ y += y_diff;
+
+ sprintf(tmp, "%8x", uvd->vpic.brightness >> 8);
+ usbvideo_OverlayString(uvd, frame, x, y, tmp);
+ y += y_diff;
+
+ sprintf(tmp, "%8x", uvd->vpic.contrast >> 12);
+ usbvideo_OverlayString(uvd, frame, x, y, tmp);
+ y += y_diff;
+
+ sprintf(tmp, "%8d", uvd->vpic.whiteness >> 8);
+ usbvideo_OverlayString(uvd, frame, x, y, tmp);
+ y += y_diff;
+}
+
+/*
+ * usbvideo_ReportStatistics()
+ *
+ * This procedure prints packet and transfer statistics.
+ *
+ * History:
+ * 14-Jan-2000 Corrected default multiplier.
+ */
+static void usbvideo_ReportStatistics(const struct uvd *uvd)
+{
+ if ((uvd != NULL) && (uvd->stats.urb_count > 0)) {
+ unsigned long allPackets, badPackets, goodPackets, percent;
+ allPackets = uvd->stats.urb_count * CAMERA_URB_FRAMES;
+ badPackets = uvd->stats.iso_skip_count + uvd->stats.iso_err_count;
+ goodPackets = allPackets - badPackets;
+ /* Calculate percentage wisely, remember integer limits */
+ assert(allPackets != 0);
+ if (goodPackets < (((unsigned long)-1)/100))
+ percent = (100 * goodPackets) / allPackets;
+ else
+ percent = goodPackets / (allPackets / 100);
+ dev_info(&uvd->dev->dev,
+ "Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%\n",
+ allPackets, badPackets, percent);
+ if (uvd->iso_packet_len > 0) {
+ unsigned long allBytes, xferBytes;
+ char multiplier = ' ';
+ allBytes = allPackets * uvd->iso_packet_len;
+ xferBytes = uvd->stats.data_count;
+ assert(allBytes != 0);
+ if (xferBytes < (((unsigned long)-1)/100))
+ percent = (100 * xferBytes) / allBytes;
+ else
+ percent = xferBytes / (allBytes / 100);
+ /* Scale xferBytes for easy reading */
+ if (xferBytes > 10*1024) {
+ xferBytes /= 1024;
+ multiplier = 'K';
+ if (xferBytes > 10*1024) {
+ xferBytes /= 1024;
+ multiplier = 'M';
+ if (xferBytes > 10*1024) {
+ xferBytes /= 1024;
+ multiplier = 'G';
+ if (xferBytes > 10*1024) {
+ xferBytes /= 1024;
+ multiplier = 'T';
+ }
+ }
+ }
+ }
+ dev_info(&uvd->dev->dev,
+ "Transfer Statistics: Transferred=%lu%cB Usage=%lu%%\n",
+ xferBytes, multiplier, percent);
+ }
+ }
+}
+
+/*
+ * usbvideo_TestPattern()
+ *
+ * Procedure forms a test pattern (yellow grid on blue background).
+ *
+ * Parameters:
+ * fullframe: if TRUE then entire frame is filled, otherwise the procedure
+ * continues from the current scanline.
+ * pmode 0: fill the frame with solid blue color (like on VCR or TV)
+ * 1: Draw a colored grid
+ *
+ * History:
+ * 01-Feb-2000 Created.
+ */
+void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode)
+{
+ struct usbvideo_frame *frame;
+ int num_cell = 0;
+ int scan_length = 0;
+ static int num_pass;
+
+ if (uvd == NULL) {
+ err("%s: uvd == NULL", __func__);
+ return;
+ }
+ if ((uvd->curframe < 0) || (uvd->curframe >= USBVIDEO_NUMFRAMES)) {
+ err("%s: uvd->curframe=%d.", __func__, uvd->curframe);
+ return;
+ }
+
+ /* Grab the current frame */
+ frame = &uvd->frame[uvd->curframe];
+
+ /* Optionally start at the beginning */
+ if (fullframe) {
+ frame->curline = 0;
+ frame->seqRead_Length = 0;
+ }
+#if 0
+ { /* For debugging purposes only */
+ char tmp[20];
+ usbvideo_VideosizeToString(tmp, sizeof(tmp), frame->request);
+ dev_info(&uvd->dev->dev, "testpattern: frame=%s\n", tmp);
+ }
+#endif
+ /* Form every scan line */
+ for (; frame->curline < VIDEOSIZE_Y(frame->request); frame->curline++) {
+ int i;
+ unsigned char *f = frame->data +
+ (VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL * frame->curline);
+ for (i=0; i < VIDEOSIZE_X(frame->request); i++) {
+ unsigned char cb=0x80;
+ unsigned char cg = 0;
+ unsigned char cr = 0;
+
+ if (pmode == 1) {
+ if (frame->curline % 32 == 0)
+ cb = 0, cg = cr = 0xFF;
+ else if (i % 32 == 0) {
+ if (frame->curline % 32 == 1)
+ num_cell++;
+ cb = 0, cg = cr = 0xFF;
+ } else {
+ cb = ((num_cell*7) + num_pass) & 0xFF;
+ cg = ((num_cell*5) + num_pass*2) & 0xFF;
+ cr = ((num_cell*3) + num_pass*3) & 0xFF;
+ }
+ } else {
+ /* Just the blue screen */
+ }
+
+ *f++ = cb;
+ *f++ = cg;
+ *f++ = cr;
+ scan_length += 3;
+ }
+ }
+
+ frame->frameState = FrameState_Done;
+ frame->seqRead_Length += scan_length;
+ ++num_pass;
+
+ /* We do this unconditionally, regardless of FLAGS_OVERLAY_STATS */
+ usbvideo_OverlayStats(uvd, frame);
+}
+
+EXPORT_SYMBOL(usbvideo_TestPattern);
+
+
+#ifdef DEBUG
+/*
+ * usbvideo_HexDump()
+ *
+ * A debugging tool. Prints hex dumps.
+ *
+ * History:
+ * 29-Jul-2000 Added printing of offsets.
+ */
+void usbvideo_HexDump(const unsigned char *data, int len)
+{
+ const int bytes_per_line = 32;
+ char tmp[128]; /* 32*3 + 5 */
+ int i, k;
+
+ for (i=k=0; len > 0; i++, len--) {
+ if (i > 0 && ((i % bytes_per_line) == 0)) {
+ printk("%s\n", tmp);
+ k=0;
+ }
+ if ((i % bytes_per_line) == 0)
+ k += sprintf(&tmp[k], "%04x: ", i);
+ k += sprintf(&tmp[k], "%02x ", data[i]);
+ }
+ if (k > 0)
+ printk("%s\n", tmp);
+}
+
+EXPORT_SYMBOL(usbvideo_HexDump);
+
+#endif
+
+/* ******************************************************************** */
+
+/* XXX: this piece of crap really wants some error handling.. */
+static int usbvideo_ClientIncModCount(struct uvd *uvd)
+{
+ if (uvd == NULL) {
+ err("%s: uvd == NULL", __func__);
+ return -EINVAL;
+ }
+ if (uvd->handle == NULL) {
+ err("%s: uvd->handle == NULL", __func__);
+ return -EINVAL;
+ }
+ if (!try_module_get(uvd->handle->md_module)) {
+ err("%s: try_module_get() == 0", __func__);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static void usbvideo_ClientDecModCount(struct uvd *uvd)
+{
+ if (uvd == NULL) {
+ err("%s: uvd == NULL", __func__);
+ return;
+ }
+ if (uvd->handle == NULL) {
+ err("%s: uvd->handle == NULL", __func__);
+ return;
+ }
+ if (uvd->handle->md_module == NULL) {
+ err("%s: uvd->handle->md_module == NULL", __func__);
+ return;
+ }
+ module_put(uvd->handle->md_module);
+}
+
+int usbvideo_register(
+ struct usbvideo **pCams,
+ const int num_cams,
+ const int num_extra,
+ const char *driverName,
+ const struct usbvideo_cb *cbTbl,
+ struct module *md,
+ const struct usb_device_id *id_table)
+{
+ struct usbvideo *cams;
+ int i, base_size, result;
+
+ /* Check parameters for sanity */
+ if ((num_cams <= 0) || (pCams == NULL) || (cbTbl == NULL)) {
+ err("%s: Illegal call", __func__);
+ return -EINVAL;
+ }
+
+ /* Check registration callback - must be set! */
+ if (cbTbl->probe == NULL) {
+ err("%s: probe() is required!", __func__);
+ return -EINVAL;
+ }
+
+ base_size = num_cams * sizeof(struct uvd) + sizeof(struct usbvideo);
+ cams = kzalloc(base_size, GFP_KERNEL);
+ if (cams == NULL) {
+ err("Failed to allocate %d. bytes for usbvideo struct", base_size);
+ return -ENOMEM;
+ }
+ dbg("%s: Allocated $%p (%d. bytes) for %d. cameras",
+ __func__, cams, base_size, num_cams);
+
+ /* Copy callbacks, apply defaults for those that are not set */
+ memmove(&cams->cb, cbTbl, sizeof(cams->cb));
+ if (cams->cb.getFrame == NULL)
+ cams->cb.getFrame = usbvideo_GetFrame;
+ if (cams->cb.disconnect == NULL)
+ cams->cb.disconnect = usbvideo_Disconnect;
+ if (cams->cb.startDataPump == NULL)
+ cams->cb.startDataPump = usbvideo_StartDataPump;
+ if (cams->cb.stopDataPump == NULL)
+ cams->cb.stopDataPump = usbvideo_StopDataPump;
+
+ cams->num_cameras = num_cams;
+ cams->cam = (struct uvd *) &cams[1];
+ cams->md_module = md;
+ mutex_init(&cams->lock); /* to 1 == available */
+
+ for (i = 0; i < num_cams; i++) {
+ struct uvd *up = &cams->cam[i];
+
+ up->handle = cams;
+
+ /* Allocate user_data separately because of kmalloc's limits */
+ if (num_extra > 0) {
+ up->user_size = num_cams * num_extra;
+ up->user_data = kmalloc(up->user_size, GFP_KERNEL);
+ if (up->user_data == NULL) {
+ err("%s: Failed to allocate user_data (%d. bytes)",
+ __func__, up->user_size);
+ while (i) {
+ up = &cams->cam[--i];
+ kfree(up->user_data);
+ }
+ kfree(cams);
+ return -ENOMEM;
+ }
+ dbg("%s: Allocated cams[%d].user_data=$%p (%d. bytes)",
+ __func__, i, up->user_data, up->user_size);
+ }
+ }
+
+ /*
+ * Register ourselves with USB stack.
+ */
+ strcpy(cams->drvName, (driverName != NULL) ? driverName : "Unknown");
+ cams->usbdrv.name = cams->drvName;
+ cams->usbdrv.probe = cams->cb.probe;
+ cams->usbdrv.disconnect = cams->cb.disconnect;
+ cams->usbdrv.id_table = id_table;
+
+ /*
+ * Update global handle to usbvideo. This is very important
+ * because probe() can be called before usb_register() returns.
+ * If the handle is not yet updated then the probe() will fail.
+ */
+ *pCams = cams;
+ result = usb_register(&cams->usbdrv);
+ if (result) {
+ for (i = 0; i < num_cams; i++) {
+ struct uvd *up = &cams->cam[i];
+ kfree(up->user_data);
+ }
+ kfree(cams);
+ }
+
+ return result;
+}
+
+EXPORT_SYMBOL(usbvideo_register);
+
+/*
+ * usbvideo_Deregister()
+ *
+ * Procedure frees all usbvideo and user data structures. Be warned that
+ * if you had some dynamically allocated components in ->user field then
+ * you should free them before calling here.
+ */
+void usbvideo_Deregister(struct usbvideo **pCams)
+{
+ struct usbvideo *cams;
+ int i;
+
+ if (pCams == NULL) {
+ err("%s: pCams == NULL", __func__);
+ return;
+ }
+ cams = *pCams;
+ if (cams == NULL) {
+ err("%s: cams == NULL", __func__);
+ return;
+ }
+
+ dbg("%s: Deregistering %s driver.", __func__, cams->drvName);
+ usb_deregister(&cams->usbdrv);
+
+ dbg("%s: Deallocating cams=$%p (%d. cameras)", __func__, cams, cams->num_cameras);
+ for (i=0; i < cams->num_cameras; i++) {
+ struct uvd *up = &cams->cam[i];
+ int warning = 0;
+
+ if (up->user_data != NULL) {
+ if (up->user_size <= 0)
+ ++warning;
+ } else {
+ if (up->user_size > 0)
+ ++warning;
+ }
+ if (warning) {
+ err("%s: Warning: user_data=$%p user_size=%d.",
+ __func__, up->user_data, up->user_size);
+ } else {
+ dbg("%s: Freeing %d. $%p->user_data=$%p",
+ __func__, i, up, up->user_data);
+ kfree(up->user_data);
+ }
+ }
+ /* Whole array was allocated in one chunk */
+ dbg("%s: Freed %d uvd structures",
+ __func__, cams->num_cameras);
+ kfree(cams);
+ *pCams = NULL;
+}
+
+EXPORT_SYMBOL(usbvideo_Deregister);
+
+/*
+ * usbvideo_Disconnect()
+ *
+ * This procedure stops all driver activity. Deallocation of
+ * the interface-private structure (pointed by 'ptr') is done now
+ * (if we don't have any open files) or later, when those files
+ * are closed. After that driver should be removable.
+ *
+ * This code handles surprise removal. The uvd->user is a counter which
+ * increments on open() and decrements on close(). If we see here that
+ * this counter is not 0 then we have a client who still has us opened.
+ * We set uvd->remove_pending flag as early as possible, and after that
+ * all access to the camera will gracefully fail. These failures should
+ * prompt client to (eventually) close the video device, and then - in
+ * usbvideo_v4l_close() - we decrement uvd->uvd_used and usage counter.
+ *
+ * History:
+ * 22-Jan-2000 Added polling of MOD_IN_USE to delay removal until all users gone.
+ * 27-Jan-2000 Reworked to allow pending disconnects; see xxx_close()
+ * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
+ * 19-Oct-2000 Moved to usbvideo module.
+ */
+static void usbvideo_Disconnect(struct usb_interface *intf)
+{
+ struct uvd *uvd = usb_get_intfdata (intf);
+ int i;
+
+ if (uvd == NULL) {
+ err("%s($%p): Illegal call.", __func__, intf);
+ return;
+ }
+
+ usb_set_intfdata (intf, NULL);
+
+ usbvideo_ClientIncModCount(uvd);
+ if (uvd->debug > 0)
+ dev_info(&intf->dev, "%s(%p.)\n", __func__, intf);
+
+ mutex_lock(&uvd->lock);
+ uvd->remove_pending = 1; /* Now all ISO data will be ignored */
+
+ /* At this time we ask to cancel outstanding URBs */
+ GET_CALLBACK(uvd, stopDataPump)(uvd);
+
+ for (i=0; i < USBVIDEO_NUMSBUF; i++)
+ usb_free_urb(uvd->sbuf[i].urb);
+
+ usb_put_dev(uvd->dev);
+ uvd->dev = NULL; /* USB device is no more */
+
+ video_unregister_device(&uvd->vdev);
+ if (uvd->debug > 0)
+ dev_info(&intf->dev, "%s: Video unregistered.\n", __func__);
+
+ if (uvd->user)
+ dev_info(&intf->dev, "%s: In use, disconnect pending.\n",
+ __func__);
+ else
+ usbvideo_CameraRelease(uvd);
+ mutex_unlock(&uvd->lock);
+ dev_info(&intf->dev, "USB camera disconnected.\n");
+
+ usbvideo_ClientDecModCount(uvd);
+}
+
+/*
+ * usbvideo_CameraRelease()
+ *
+ * This code does final release of uvd. This happens
+ * after the device is disconnected -and- all clients
+ * closed their files.
+ *
+ * History:
+ * 27-Jan-2000 Created.
+ */
+static void usbvideo_CameraRelease(struct uvd *uvd)
+{
+ if (uvd == NULL) {
+ err("%s: Illegal call", __func__);
+ return;
+ }
+
+ RingQueue_Free(&uvd->dp);
+ if (VALID_CALLBACK(uvd, userFree))
+ GET_CALLBACK(uvd, userFree)(uvd);
+ uvd->uvd_used = 0; /* This is atomic, no need to take mutex */
+}
+
+/*
+ * usbvideo_find_struct()
+ *
+ * This code searches the array of preallocated (static) structures
+ * and returns index of the first one that isn't in use. Returns -1
+ * if there are no free structures.
+ *
+ * History:
+ * 27-Jan-2000 Created.
+ */
+static int usbvideo_find_struct(struct usbvideo *cams)
+{
+ int u, rv = -1;
+
+ if (cams == NULL) {
+ err("No usbvideo handle?");
+ return -1;
+ }
+ mutex_lock(&cams->lock);
+ for (u = 0; u < cams->num_cameras; u++) {
+ struct uvd *uvd = &cams->cam[u];
+ if (!uvd->uvd_used) /* This one is free */
+ {
+ uvd->uvd_used = 1; /* In use now */
+ mutex_init(&uvd->lock); /* to 1 == available */
+ uvd->dev = NULL;
+ rv = u;
+ break;
+ }
+ }
+ mutex_unlock(&cams->lock);
+ return rv;
+}
+
+static const struct v4l2_file_operations usbvideo_fops = {
+ .owner = THIS_MODULE,
+ .open = usbvideo_v4l_open,
+ .release =usbvideo_v4l_close,
+ .read = usbvideo_v4l_read,
+ .mmap = usbvideo_v4l_mmap,
+ .ioctl = usbvideo_v4l_ioctl,
+};
+static const struct video_device usbvideo_template = {
+ .fops = &usbvideo_fops,
+};
+
+struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams)
+{
+ int i, devnum;
+ struct uvd *uvd = NULL;
+
+ if (cams == NULL) {
+ err("No usbvideo handle?");
+ return NULL;
+ }
+
+ devnum = usbvideo_find_struct(cams);
+ if (devnum == -1) {
+ err("IBM USB camera driver: Too many devices!");
+ return NULL;
+ }
+ uvd = &cams->cam[devnum];
+ dbg("Device entry #%d. at $%p", devnum, uvd);
+
+ /* Not relying upon caller we increase module counter ourselves */
+ usbvideo_ClientIncModCount(uvd);
+
+ mutex_lock(&uvd->lock);
+ for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+ uvd->sbuf[i].urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
+ if (uvd->sbuf[i].urb == NULL) {
+ err("usb_alloc_urb(%d.) failed.", FRAMES_PER_DESC);
+ uvd->uvd_used = 0;
+ uvd = NULL;
+ goto allocate_done;
+ }
+ }
+ uvd->user=0;
+ uvd->remove_pending = 0;
+ uvd->last_error = 0;
+ RingQueue_Initialize(&uvd->dp);
+
+ /* Initialize video device structure */
+ uvd->vdev = usbvideo_template;
+ sprintf(uvd->vdev.name, "%.20s USB Camera", cams->drvName);
+ /*
+ * The client is free to overwrite those because we
+ * return control to the client's probe function right now.
+ */
+allocate_done:
+ mutex_unlock(&uvd->lock);
+ usbvideo_ClientDecModCount(uvd);
+ return uvd;
+}
+
+EXPORT_SYMBOL(usbvideo_AllocateDevice);
+
+int usbvideo_RegisterVideoDevice(struct uvd *uvd)
+{
+ char tmp1[20], tmp2[20]; /* Buffers for printing */
+
+ if (uvd == NULL) {
+ err("%s: Illegal call.", __func__);
+ return -EINVAL;
+ }
+ if (uvd->video_endp == 0) {
+ dev_info(&uvd->dev->dev,
+ "%s: No video endpoint specified; data pump disabled.\n",
+ __func__);
+ }
+ if (uvd->paletteBits == 0) {
+ err("%s: No palettes specified!", __func__);
+ return -EINVAL;
+ }
+ if (uvd->defaultPalette == 0) {
+ dev_info(&uvd->dev->dev, "%s: No default palette!\n",
+ __func__);
+ }
+
+ uvd->max_frame_size = VIDEOSIZE_X(uvd->canvas) *
+ VIDEOSIZE_Y(uvd->canvas) * V4L_BYTES_PER_PIXEL;
+ usbvideo_VideosizeToString(tmp1, sizeof(tmp1), uvd->videosize);
+ usbvideo_VideosizeToString(tmp2, sizeof(tmp2), uvd->canvas);
+
+ if (uvd->debug > 0) {
+ dev_info(&uvd->dev->dev,
+ "%s: iface=%d. endpoint=$%02x paletteBits=$%08lx\n",
+ __func__, uvd->iface, uvd->video_endp,
+ uvd->paletteBits);
+ }
+ if (uvd->dev == NULL) {
+ err("%s: uvd->dev == NULL", __func__);
+ return -EINVAL;
+ }
+ uvd->vdev.parent = &uvd->dev->dev;
+ uvd->vdev.release = video_device_release_empty;
+ if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
+ err("%s: video_register_device failed", __func__);
+ return -EPIPE;
+ }
+ if (uvd->debug > 1) {
+ dev_info(&uvd->dev->dev,
+ "%s: video_register_device() successful\n", __func__);
+ }
+
+ dev_info(&uvd->dev->dev, "%s on %s: canvas=%s videosize=%s\n",
+ (uvd->handle != NULL) ? uvd->handle->drvName : "???",
+ video_device_node_name(&uvd->vdev), tmp2, tmp1);
+
+ usb_get_dev(uvd->dev);
+ return 0;
+}
+
+EXPORT_SYMBOL(usbvideo_RegisterVideoDevice);
+
+/* ******************************************************************** */
+
+static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct uvd *uvd = file->private_data;
+ unsigned long start = vma->vm_start;
+ unsigned long size = vma->vm_end-vma->vm_start;
+ unsigned long page, pos;
+
+ if (!CAMERA_IS_OPERATIONAL(uvd))
+ return -EFAULT;
+
+ if (size > (((USBVIDEO_NUMFRAMES * uvd->max_frame_size) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)))
+ return -EINVAL;
+
+ pos = (unsigned long) uvd->fbuf;
+ while (size > 0) {
+ page = vmalloc_to_pfn((void *)pos);
+ if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
+ return -EAGAIN;
+
+ start += PAGE_SIZE;
+ pos += PAGE_SIZE;
+ if (size > PAGE_SIZE)
+ size -= PAGE_SIZE;
+ else
+ size = 0;
+ }
+
+ return 0;
+}
+
+/*
+ * usbvideo_v4l_open()
+ *
+ * This is part of Video 4 Linux API. The driver can be opened by one
+ * client only (checks internal counter 'uvdser'). The procedure
+ * then allocates buffers needed for video processing.
+ *
+ * History:
+ * 22-Jan-2000 Rewrote, moved scratch buffer allocation here. Now the
+ * camera is also initialized here (once per connect), at
+ * expense of V4L client (it waits on open() call).
+ * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers.
+ * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
+ */
+static int usbvideo_v4l_open(struct file *file)
+{
+ struct video_device *dev = video_devdata(file);
+ struct uvd *uvd = (struct uvd *) dev;
+ const int sb_size = FRAMES_PER_DESC * uvd->iso_packet_len;
+ int i, errCode = 0;
+
+ if (uvd->debug > 1)
+ dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev);
+
+ if (usbvideo_ClientIncModCount(uvd) < 0)
+ return -ENODEV;
+ mutex_lock(&uvd->lock);
+
+ if (uvd->user) {
+ err("%s: Someone tried to open an already opened device!", __func__);
+ errCode = -EBUSY;
+ } else {
+ /* Clear statistics */
+ memset(&uvd->stats, 0, sizeof(uvd->stats));
+
+ /* Clean pointers so we know if we allocated something */
+ for (i=0; i < USBVIDEO_NUMSBUF; i++)
+ uvd->sbuf[i].data = NULL;
+
+ /* Allocate memory for the frame buffers */
+ uvd->fbuf_size = USBVIDEO_NUMFRAMES * uvd->max_frame_size;
+ uvd->fbuf = usbvideo_rvmalloc(uvd->fbuf_size);
+ RingQueue_Allocate(&uvd->dp, RING_QUEUE_SIZE);
+ if ((uvd->fbuf == NULL) ||
+ (!RingQueue_IsAllocated(&uvd->dp))) {
+ err("%s: Failed to allocate fbuf or dp", __func__);
+ errCode = -ENOMEM;
+ } else {
+ /* Allocate all buffers */
+ for (i=0; i < USBVIDEO_NUMFRAMES; i++) {
+ uvd->frame[i].frameState = FrameState_Unused;
+ uvd->frame[i].data = uvd->fbuf + i*(uvd->max_frame_size);
+ /*
+ * Set default sizes in case IOCTL (VIDIOCMCAPTURE)
+ * is not used (using read() instead).
+ */
+ uvd->frame[i].canvas = uvd->canvas;
+ uvd->frame[i].seqRead_Index = 0;
+ }
+ for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+ uvd->sbuf[i].data = kmalloc(sb_size, GFP_KERNEL);
+ if (uvd->sbuf[i].data == NULL) {
+ errCode = -ENOMEM;
+ break;
+ }
+ }
+ }
+ if (errCode != 0) {
+ /* Have to free all that memory */
+ if (uvd->fbuf != NULL) {
+ usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size);
+ uvd->fbuf = NULL;
+ }
+ RingQueue_Free(&uvd->dp);
+ for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+ kfree(uvd->sbuf[i].data);
+ uvd->sbuf[i].data = NULL;
+ }
+ }
+ }
+
+ /* If so far no errors then we shall start the camera */
+ if (errCode == 0) {
+ /* Start data pump if we have valid endpoint */
+ if (uvd->video_endp != 0)
+ errCode = GET_CALLBACK(uvd, startDataPump)(uvd);
+ if (errCode == 0) {
+ if (VALID_CALLBACK(uvd, setupOnOpen)) {
+ if (uvd->debug > 1)
+ dev_info(&uvd->dev->dev,
+ "%s: setupOnOpen callback\n",
+ __func__);
+ errCode = GET_CALLBACK(uvd, setupOnOpen)(uvd);
+ if (errCode < 0) {
+ err("%s: setupOnOpen callback failed (%d.).",
+ __func__, errCode);
+ } else if (uvd->debug > 1) {
+ dev_info(&uvd->dev->dev,
+ "%s: setupOnOpen callback successful\n",
+ __func__);
+ }
+ }
+ if (errCode == 0) {
+ uvd->settingsAdjusted = 0;
+ if (uvd->debug > 1)
+ dev_info(&uvd->dev->dev,
+ "%s: Open succeeded.\n",
+ __func__);
+ uvd->user++;
+ file->private_data = uvd;
+ }
+ }
+ }
+ mutex_unlock(&uvd->lock);
+ if (errCode != 0)
+ usbvideo_ClientDecModCount(uvd);
+ if (uvd->debug > 0)
+ dev_info(&uvd->dev->dev, "%s: Returning %d.\n", __func__,
+ errCode);
+ return errCode;
+}
+
+/*
+ * usbvideo_v4l_close()
+ *
+ * This is part of Video 4 Linux API. The procedure
+ * stops streaming and deallocates all buffers that were earlier
+ * allocated in usbvideo_v4l_open().
+ *
+ * History:
+ * 22-Jan-2000 Moved scratch buffer deallocation here.
+ * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers.
+ * 24-May-2000 Moved MOD_DEC_USE_COUNT outside of code that can sleep.
+ */
+static int usbvideo_v4l_close(struct file *file)
+{
+ struct video_device *dev = file->private_data;
+ struct uvd *uvd = (struct uvd *) dev;
+ int i;
+
+ if (uvd->debug > 1)
+ dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, dev);
+
+ mutex_lock(&uvd->lock);
+ GET_CALLBACK(uvd, stopDataPump)(uvd);
+ usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size);
+ uvd->fbuf = NULL;
+ RingQueue_Free(&uvd->dp);
+
+ for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+ kfree(uvd->sbuf[i].data);
+ uvd->sbuf[i].data = NULL;
+ }
+
+#if USBVIDEO_REPORT_STATS
+ usbvideo_ReportStatistics(uvd);
+#endif
+
+ uvd->user--;
+ if (uvd->remove_pending) {
+ if (uvd->debug > 0)
+ dev_info(&uvd->dev->dev, "%s: Final disconnect.\n",
+ __func__);
+ usbvideo_CameraRelease(uvd);
+ }
+ mutex_unlock(&uvd->lock);
+ usbvideo_ClientDecModCount(uvd);
+
+ if (uvd->debug > 1)
+ dev_info(&uvd->dev->dev, "%s: Completed.\n", __func__);
+ file->private_data = NULL;
+ return 0;
+}
+
+/*
+ * usbvideo_v4l_ioctl()
+ *
+ * This is part of Video 4 Linux API. The procedure handles ioctl() calls.
+ *
+ * History:
+ * 22-Jan-2000 Corrected VIDIOCSPICT to reject unsupported settings.
+ */
+static long usbvideo_v4l_do_ioctl(struct file *file, unsigned int cmd, void *arg)
+{
+ struct uvd *uvd = file->private_data;
+
+ if (!CAMERA_IS_OPERATIONAL(uvd))
+ return -EIO;
+
+ switch (cmd) {
+ case VIDIOCGCAP:
+ {
+ struct video_capability *b = arg;
+ *b = uvd->vcap;
+ return 0;
+ }
+ case VIDIOCGCHAN:
+ {
+ struct video_channel *v = arg;
+ *v = uvd->vchan;
+ return 0;
+ }
+ case VIDIOCSCHAN:
+ {
+ struct video_channel *v = arg;
+ if (v->channel != 0)
+ return -EINVAL;
+ return 0;
+ }
+ case VIDIOCGPICT:
+ {
+ struct video_picture *pic = arg;
+ *pic = uvd->vpic;
+ return 0;
+ }
+ case VIDIOCSPICT:
+ {
+ struct video_picture *pic = arg;
+ /*
+ * Use temporary 'video_picture' structure to preserve our
+ * own settings (such as color depth, palette) that we
+ * aren't allowing everyone (V4L client) to change.
+ */
+ uvd->vpic.brightness = pic->brightness;
+ uvd->vpic.hue = pic->hue;
+ uvd->vpic.colour = pic->colour;
+ uvd->vpic.contrast = pic->contrast;
+ uvd->settingsAdjusted = 0; /* Will force new settings */
+ return 0;
+ }
+ case VIDIOCSWIN:
+ {
+ struct video_window *vw = arg;
+
+ if(VALID_CALLBACK(uvd, setVideoMode)) {
+ return GET_CALLBACK(uvd, setVideoMode)(uvd, vw);
+ }
+
+ if (vw->flags)
+ return -EINVAL;
+ if (vw->clipcount)
+ return -EINVAL;
+ if (vw->width != VIDEOSIZE_X(uvd->canvas))
+ return -EINVAL;
+ if (vw->height != VIDEOSIZE_Y(uvd->canvas))
+ return -EINVAL;
+
+ return 0;
+ }
+ case VIDIOCGWIN:
+ {
+ struct video_window *vw = arg;
+
+ vw->x = 0;
+ vw->y = 0;
+ vw->width = VIDEOSIZE_X(uvd->videosize);
+ vw->height = VIDEOSIZE_Y(uvd->videosize);
+ vw->chromakey = 0;
+ if (VALID_CALLBACK(uvd, getFPS))
+ vw->flags = GET_CALLBACK(uvd, getFPS)(uvd);
+ else
+ vw->flags = 10; /* FIXME: do better! */
+ return 0;
+ }
+ case VIDIOCGMBUF:
+ {
+ struct video_mbuf *vm = arg;
+ int i;
+
+ memset(vm, 0, sizeof(*vm));
+ vm->size = uvd->max_frame_size * USBVIDEO_NUMFRAMES;
+ vm->frames = USBVIDEO_NUMFRAMES;
+ for(i = 0; i < USBVIDEO_NUMFRAMES; i++)
+ vm->offsets[i] = i * uvd->max_frame_size;
+
+ return 0;
+ }
+ case VIDIOCMCAPTURE:
+ {
+ struct video_mmap *vm = arg;
+
+ if (uvd->debug >= 1) {
+ dev_info(&uvd->dev->dev,
+ "VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.\n",
+ vm->frame, vm->width, vm->height, vm->format);
+ }
+ /*
+ * Check if the requested size is supported. If the requestor
+ * requests too big a frame then we may be tricked into accessing
+ * outside of own preallocated frame buffer (in uvd->frame).
+ * This will cause oops or a security hole. Theoretically, we
+ * could only clamp the size down to acceptable bounds, but then
+ * we'd need to figure out how to insert our smaller buffer into
+ * larger caller's buffer... this is not an easy question. So we
+ * here just flatly reject too large requests, assuming that the
+ * caller will resubmit with smaller size. Callers should know
+ * what size we support (returned by VIDIOCGCAP). However vidcat,
+ * for one, does not care and allows to ask for any size.
+ */
+ if ((vm->width > VIDEOSIZE_X(uvd->canvas)) ||
+ (vm->height > VIDEOSIZE_Y(uvd->canvas))) {
+ if (uvd->debug > 0) {
+ dev_info(&uvd->dev->dev,
+ "VIDIOCMCAPTURE: Size=%dx%d "
+ "too large; allowed only up "
+ "to %ldx%ld\n", vm->width,
+ vm->height,
+ VIDEOSIZE_X(uvd->canvas),
+ VIDEOSIZE_Y(uvd->canvas));
+ }
+ return -EINVAL;
+ }
+ /* Check if the palette is supported */
+ if (((1L << vm->format) & uvd->paletteBits) == 0) {
+ if (uvd->debug > 0) {
+ dev_info(&uvd->dev->dev,
+ "VIDIOCMCAPTURE: format=%d. "
+ "not supported "
+ "(paletteBits=$%08lx)\n",
+ vm->format, uvd->paletteBits);
+ }
+ return -EINVAL;
+ }
+ if ((vm->frame < 0) || (vm->frame >= USBVIDEO_NUMFRAMES)) {
+ err("VIDIOCMCAPTURE: vm.frame=%d. !E [0-%d]", vm->frame, USBVIDEO_NUMFRAMES-1);
+ return -EINVAL;
+ }
+ if (uvd->frame[vm->frame].frameState == FrameState_Grabbing) {
+ /* Not an error - can happen */
+ }
+ uvd->frame[vm->frame].request = VIDEOSIZE(vm->width, vm->height);
+ uvd->frame[vm->frame].palette = vm->format;
+
+ /* Mark it as ready */
+ uvd->frame[vm->frame].frameState = FrameState_Ready;
+
+ return usbvideo_NewFrame(uvd, vm->frame);
+ }
+ case VIDIOCSYNC:
+ {
+ int *frameNum = arg;
+ int ret;
+
+ if (*frameNum < 0 || *frameNum >= USBVIDEO_NUMFRAMES)
+ return -EINVAL;
+
+ if (uvd->debug >= 1)
+ dev_info(&uvd->dev->dev,
+ "VIDIOCSYNC: syncing to frame %d.\n",
+ *frameNum);
+ if (uvd->flags & FLAGS_NO_DECODING)
+ ret = usbvideo_GetFrame(uvd, *frameNum);
+ else if (VALID_CALLBACK(uvd, getFrame)) {
+ ret = GET_CALLBACK(uvd, getFrame)(uvd, *frameNum);
+ if ((ret < 0) && (uvd->debug >= 1)) {
+ err("VIDIOCSYNC: getFrame() returned %d.", ret);
+ }
+ } else {
+ err("VIDIOCSYNC: getFrame is not set");
+ ret = -EFAULT;
+ }
+
+ /*
+ * The frame is in FrameState_Done_Hold state. Release it
+ * right now because its data is already mapped into
+ * the user space and it's up to the application to
+ * make use of it until it asks for another frame.
+ */
+ uvd->frame[*frameNum].frameState = FrameState_Unused;
+ return ret;
+ }
+ case VIDIOCGFBUF:
+ {
+ struct video_buffer *vb = arg;
+
+ memset(vb, 0, sizeof(*vb));
+ return 0;
+ }
+ case VIDIOCKEY:
+ return 0;
+
+ case VIDIOCCAPTURE:
+ return -EINVAL;
+
+ case VIDIOCSFBUF:
+
+ case VIDIOCGTUNER:
+ case VIDIOCSTUNER:
+
+ case VIDIOCGFREQ:
+ case VIDIOCSFREQ:
+
+ case VIDIOCGAUDIO:
+ case VIDIOCSAUDIO:
+ return -EINVAL;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static long usbvideo_v4l_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ return video_usercopy(file, cmd, arg, usbvideo_v4l_do_ioctl);
+}
+
+/*
+ * usbvideo_v4l_read()
+ *
+ * This is mostly boring stuff. We simply ask for a frame and when it
+ * arrives copy all the video data from it into user space. There is
+ * no obvious need to override this method.
+ *
+ * History:
+ * 20-Oct-2000 Created.
+ * 01-Nov-2000 Added mutex (uvd->lock).
+ */
+static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct uvd *uvd = file->private_data;
+ int noblock = file->f_flags & O_NONBLOCK;
+ int frmx = -1, i;
+ struct usbvideo_frame *frame;
+
+ if (!CAMERA_IS_OPERATIONAL(uvd) || (buf == NULL))
+ return -EFAULT;
+
+ if (uvd->debug >= 1)
+ dev_info(&uvd->dev->dev,
+ "%s: %Zd. bytes, noblock=%d.\n",
+ __func__, count, noblock);
+
+ mutex_lock(&uvd->lock);
+
+ /* See if a frame is completed, then use it. */
+ for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
+ if ((uvd->frame[i].frameState == FrameState_Done) ||
+ (uvd->frame[i].frameState == FrameState_Done_Hold) ||
+ (uvd->frame[i].frameState == FrameState_Error)) {
+ frmx = i;
+ break;
+ }
+ }
+
+ /* FIXME: If we don't start a frame here then who ever does? */
+ if (noblock && (frmx == -1)) {
+ count = -EAGAIN;
+ goto read_done;
+ }
+
+ /*
+ * If no FrameState_Done, look for a FrameState_Grabbing state.
+ * See if a frame is in process (grabbing), then use it.
+ * We will need to wait until it becomes cooked, of course.
+ */
+ if (frmx == -1) {
+ for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
+ if (uvd->frame[i].frameState == FrameState_Grabbing) {
+ frmx = i;
+ break;
+ }
+ }
+ }
+
+ /*
+ * If no frame is active, start one. We don't care which one
+ * it will be, so #0 is as good as any.
+ * In read access mode we don't have convenience of VIDIOCMCAPTURE
+ * to specify the requested palette (video format) on per-frame
+ * basis. This means that we have to return data in -some- format
+ * and just hope that the client knows what to do with it.
+ * The default format is configured in uvd->defaultPalette field
+ * as one of VIDEO_PALETTE_xxx values. We stuff it into the new
+ * frame and initiate the frame filling process.
+ */
+ if (frmx == -1) {
+ if (uvd->defaultPalette == 0) {
+ err("%s: No default palette; don't know what to do!", __func__);
+ count = -EFAULT;
+ goto read_done;
+ }
+ frmx = 0;
+ /*
+ * We have no per-frame control over video size.
+ * Therefore we only can use whatever size was
+ * specified as default.
+ */
+ uvd->frame[frmx].request = uvd->videosize;
+ uvd->frame[frmx].palette = uvd->defaultPalette;
+ uvd->frame[frmx].frameState = FrameState_Ready;
+ usbvideo_NewFrame(uvd, frmx);
+ /* Now frame 0 is supposed to start filling... */
+ }
+
+ /*
+ * Get a pointer to the active frame. It is either previously
+ * completed frame or frame in progress but not completed yet.
+ */
+ frame = &uvd->frame[frmx];
+
+ /*
+ * Sit back & wait until the frame gets filled and postprocessed.
+ * If we fail to get the picture [in time] then return the error.
+ * In this call we specify that we want the frame to be waited for,
+ * postprocessed and switched into FrameState_Done_Hold state. This
+ * state is used to hold the frame as "fully completed" between
+ * subsequent partial reads of the same frame.
+ */
+ if (frame->frameState != FrameState_Done_Hold) {
+ long rv = -EFAULT;
+ if (uvd->flags & FLAGS_NO_DECODING)
+ rv = usbvideo_GetFrame(uvd, frmx);
+ else if (VALID_CALLBACK(uvd, getFrame))
+ rv = GET_CALLBACK(uvd, getFrame)(uvd, frmx);
+ else
+ err("getFrame is not set");
+ if ((rv != 0) || (frame->frameState != FrameState_Done_Hold)) {
+ count = rv;
+ goto read_done;
+ }
+ }
+
+ /*
+ * Copy bytes to user space. We allow for partial reads, which
+ * means that the user application can request read less than
+ * the full frame size. It is up to the application to issue
+ * subsequent calls until entire frame is read.
+ *
+ * First things first, make sure we don't copy more than we
+ * have - even if the application wants more. That would be
+ * a big security embarassment!
+ */
+ if ((count + frame->seqRead_Index) > frame->seqRead_Length)
+ count = frame->seqRead_Length - frame->seqRead_Index;
+
+ /*
+ * Copy requested amount of data to user space. We start
+ * copying from the position where we last left it, which
+ * will be zero for a new frame (not read before).
+ */
+ if (copy_to_user(buf, frame->data + frame->seqRead_Index, count)) {
+ count = -EFAULT;
+ goto read_done;
+ }
+
+ /* Update last read position */
+ frame->seqRead_Index += count;
+ if (uvd->debug >= 1) {
+ err("%s: {copy} count used=%Zd, new seqRead_Index=%ld",
+ __func__, count, frame->seqRead_Index);
+ }
+
+ /* Finally check if the frame is done with and "release" it */
+ if (frame->seqRead_Index >= frame->seqRead_Length) {
+ /* All data has been read */
+ frame->seqRead_Index = 0;
+
+ /* Mark it as available to be used again. */
+ uvd->frame[frmx].frameState = FrameState_Unused;
+ if (usbvideo_NewFrame(uvd, (frmx + 1) % USBVIDEO_NUMFRAMES)) {
+ err("%s: usbvideo_NewFrame failed.", __func__);
+ }
+ }
+read_done:
+ mutex_unlock(&uvd->lock);
+ return count;
+}
+
+/*
+ * Make all of the blocks of data contiguous
+ */
+static int usbvideo_CompressIsochronous(struct uvd *uvd, struct urb *urb)
+{
+ char *cdata;
+ int i, totlen = 0;
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ int n = urb->iso_frame_desc[i].actual_length;
+ int st = urb->iso_frame_desc[i].status;
+
+ cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+
+ /* Detect and ignore errored packets */
+ if (st < 0) {
+ if (uvd->debug >= 1)
+ err("Data error: packet=%d. len=%d. status=%d.", i, n, st);
+ uvd->stats.iso_err_count++;
+ continue;
+ }
+
+ /* Detect and ignore empty packets */
+ if (n <= 0) {
+ uvd->stats.iso_skip_count++;
+ continue;
+ }
+ totlen += n; /* Little local accounting */
+ RingQueue_Enqueue(&uvd->dp, cdata, n);
+ }
+ return totlen;
+}
+
+static void usbvideo_IsocIrq(struct urb *urb)
+{
+ int i, ret, len;
+ struct uvd *uvd = urb->context;
+
+ /* We don't want to do anything if we are about to be removed! */
+ if (!CAMERA_IS_OPERATIONAL(uvd))
+ return;
+#if 0
+ if (urb->actual_length > 0) {
+ dev_info(&uvd->dev->dev,
+ "urb=$%p status=%d. errcount=%d. length=%d.\n",
+ urb, urb->status, urb->error_count,
+ urb->actual_length);
+ } else {
+ static int c = 0;
+ if (c++ % 100 == 0)
+ dev_info(&uvd->dev->dev, "No Isoc data\n");
+ }
+#endif
+
+ if (!uvd->streaming) {
+ if (uvd->debug >= 1)
+ dev_info(&uvd->dev->dev,
+ "Not streaming, but interrupt!\n");
+ return;
+ }
+
+ uvd->stats.urb_count++;
+ if (urb->actual_length <= 0)
+ goto urb_done_with;
+
+ /* Copy the data received into ring queue */
+ len = usbvideo_CompressIsochronous(uvd, urb);
+ uvd->stats.urb_length = len;
+ if (len <= 0)
+ goto urb_done_with;
+
+ /* Here we got some data */
+ uvd->stats.data_count += len;
+ RingQueue_WakeUpInterruptible(&uvd->dp);
+
+urb_done_with:
+ for (i = 0; i < FRAMES_PER_DESC; i++) {
+ urb->iso_frame_desc[i].status = 0;
+ urb->iso_frame_desc[i].actual_length = 0;
+ }
+ urb->status = 0;
+ urb->dev = uvd->dev;
+ ret = usb_submit_urb (urb, GFP_KERNEL);
+ if(ret)
+ err("usb_submit_urb error (%d)", ret);
+ return;
+}
+
+/*
+ * usbvideo_StartDataPump()
+ *
+ * History:
+ * 27-Jan-2000 Used ibmcam->iface, ibmcam->ifaceAltActive instead
+ * of hardcoded values. Simplified by using for loop,
+ * allowed any number of URBs.
+ */
+static int usbvideo_StartDataPump(struct uvd *uvd)
+{
+ struct usb_device *dev = uvd->dev;
+ int i, errFlag;
+
+ if (uvd->debug > 1)
+ dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd);
+
+ if (!CAMERA_IS_OPERATIONAL(uvd)) {
+ err("%s: Camera is not operational", __func__);
+ return -EFAULT;
+ }
+ uvd->curframe = -1;
+
+ /* Alternate interface 1 is is the biggest frame size */
+ i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive);
+ if (i < 0) {
+ err("%s: usb_set_interface error", __func__);
+ uvd->last_error = i;
+ return -EBUSY;
+ }
+ if (VALID_CALLBACK(uvd, videoStart))
+ GET_CALLBACK(uvd, videoStart)(uvd);
+ else
+ err("%s: videoStart not set", __func__);
+
+ /* We double buffer the Iso lists */
+ for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+ int j, k;
+ struct urb *urb = uvd->sbuf[i].urb;
+ urb->dev = dev;
+ urb->context = uvd;
+ urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp);
+ urb->interval = 1;
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->transfer_buffer = uvd->sbuf[i].data;
+ urb->complete = usbvideo_IsocIrq;
+ urb->number_of_packets = FRAMES_PER_DESC;
+ urb->transfer_buffer_length = uvd->iso_packet_len * FRAMES_PER_DESC;
+ for (j=k=0; j < FRAMES_PER_DESC; j++, k += uvd->iso_packet_len) {
+ urb->iso_frame_desc[j].offset = k;
+ urb->iso_frame_desc[j].length = uvd->iso_packet_len;
+ }
+ }
+
+ /* Submit all URBs */
+ for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+ errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL);
+ if (errFlag)
+ err("%s: usb_submit_isoc(%d) ret %d", __func__, i, errFlag);
+ }
+
+ uvd->streaming = 1;
+ if (uvd->debug > 1)
+ dev_info(&uvd->dev->dev,
+ "%s: streaming=1 video_endp=$%02x\n", __func__,
+ uvd->video_endp);
+ return 0;
+}
+
+/*
+ * usbvideo_StopDataPump()
+ *
+ * This procedure stops streaming and deallocates URBs. Then it
+ * activates zero-bandwidth alt. setting of the video interface.
+ *
+ * History:
+ * 22-Jan-2000 Corrected order of actions to work after surprise removal.
+ * 27-Jan-2000 Used uvd->iface, uvd->ifaceAltInactive instead of hardcoded values.
+ */
+static void usbvideo_StopDataPump(struct uvd *uvd)
+{
+ int i, j;
+
+ if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL))
+ return;
+
+ if (uvd->debug > 1)
+ dev_info(&uvd->dev->dev, "%s($%p)\n", __func__, uvd);
+
+ /* Unschedule all of the iso td's */
+ for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+ usb_kill_urb(uvd->sbuf[i].urb);
+ }
+ if (uvd->debug > 1)
+ dev_info(&uvd->dev->dev, "%s: streaming=0\n", __func__);
+ uvd->streaming = 0;
+
+ if (!uvd->remove_pending) {
+ /* Invoke minidriver's magic to stop the camera */
+ if (VALID_CALLBACK(uvd, videoStop))
+ GET_CALLBACK(uvd, videoStop)(uvd);
+ else
+ err("%s: videoStop not set", __func__);
+
+ /* Set packet size to 0 */
+ j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive);
+ if (j < 0) {
+ err("%s: usb_set_interface() error %d.", __func__, j);
+ uvd->last_error = j;
+ }
+ }
+}
+
+/*
+ * usbvideo_NewFrame()
+ *
+ * History:
+ * 29-Mar-00 Added copying of previous frame into the current one.
+ * 6-Aug-00 Added model 3 video sizes, removed redundant width, height.
+ */
+static int usbvideo_NewFrame(struct uvd *uvd, int framenum)
+{
+ struct usbvideo_frame *frame;
+ int n;
+
+ if (uvd->debug > 1)
+ dev_info(&uvd->dev->dev, "usbvideo_NewFrame($%p,%d.)\n", uvd,
+ framenum);
+
+ /* If we're not grabbing a frame right now and the other frame is */
+ /* ready to be grabbed into, then use it instead */
+ if (uvd->curframe != -1)
+ return 0;
+
+ /* If necessary we adjust picture settings between frames */
+ if (!uvd->settingsAdjusted) {
+ if (VALID_CALLBACK(uvd, adjustPicture))
+ GET_CALLBACK(uvd, adjustPicture)(uvd);
+ uvd->settingsAdjusted = 1;
+ }
+
+ n = (framenum + 1) % USBVIDEO_NUMFRAMES;
+ if (uvd->frame[n].frameState == FrameState_Ready)
+ framenum = n;
+
+ frame = &uvd->frame[framenum];
+
+ frame->frameState = FrameState_Grabbing;
+ frame->scanstate = ScanState_Scanning;
+ frame->seqRead_Length = 0; /* Accumulated in xxx_parse_data() */
+ frame->deinterlace = Deinterlace_None;
+ frame->flags = 0; /* No flags yet, up to minidriver (or us) to set them */
+ uvd->curframe = framenum;
+
+ /*
+ * Normally we would want to copy previous frame into the current one
+ * before we even start filling it with data; this allows us to stop
+ * filling at any moment; top portion of the frame will be new and
+ * bottom portion will stay as it was in previous frame. If we don't
+ * do that then missing chunks of video stream will result in flickering
+ * portions of old data whatever it was before.
+ *
+ * If we choose not to copy previous frame (to, for example, save few
+ * bus cycles - the frame can be pretty large!) then we have an option
+ * to clear the frame before using. If we experience losses in this
+ * mode then missing picture will be black (no flickering).
+ *
+ * Finally, if user chooses not to clean the current frame before
+ * filling it with data then the old data will be visible if we fail
+ * to refill entire frame with new data.
+ */
+ if (!(uvd->flags & FLAGS_SEPARATE_FRAMES)) {
+ /* This copies previous frame into this one to mask losses */
+ int prev = (framenum - 1 + USBVIDEO_NUMFRAMES) % USBVIDEO_NUMFRAMES;
+ memmove(frame->data, uvd->frame[prev].data, uvd->max_frame_size);
+ } else {
+ if (uvd->flags & FLAGS_CLEAN_FRAMES) {
+ /* This provides a "clean" frame but slows things down */
+ memset(frame->data, 0, uvd->max_frame_size);
+ }
+ }
+ return 0;
+}
+
+/*
+ * usbvideo_CollectRawData()
+ *
+ * This procedure can be used instead of 'processData' callback if you
+ * only want to dump the raw data from the camera into the output
+ * device (frame buffer). You can look at it with V4L client, but the
+ * image will be unwatchable. The main purpose of this code and of the
+ * mode FLAGS_NO_DECODING is debugging and capturing of datastreams from
+ * new, unknown cameras. This procedure will be automatically invoked
+ * instead of the specified callback handler when uvd->flags has bit
+ * FLAGS_NO_DECODING set. Therefore, any regular build of any driver
+ * based on usbvideo can use this feature at any time.
+ */
+static void usbvideo_CollectRawData(struct uvd *uvd, struct usbvideo_frame *frame)
+{
+ int n;
+
+ assert(uvd != NULL);
+ assert(frame != NULL);
+
+ /* Try to move data from queue into frame buffer */
+ n = RingQueue_GetLength(&uvd->dp);
+ if (n > 0) {
+ int m;
+ /* See how much space we have left */
+ m = uvd->max_frame_size - frame->seqRead_Length;
+ if (n > m)
+ n = m;
+ /* Now move that much data into frame buffer */
+ RingQueue_Dequeue(
+ &uvd->dp,
+ frame->data + frame->seqRead_Length,
+ m);
+ frame->seqRead_Length += m;
+ }
+ /* See if we filled the frame */
+ if (frame->seqRead_Length >= uvd->max_frame_size) {
+ frame->frameState = FrameState_Done;
+ uvd->curframe = -1;
+ uvd->stats.frame_num++;
+ }
+}
+
+static int usbvideo_GetFrame(struct uvd *uvd, int frameNum)
+{
+ struct usbvideo_frame *frame = &uvd->frame[frameNum];
+
+ if (uvd->debug >= 2)
+ dev_info(&uvd->dev->dev, "%s($%p,%d.)\n", __func__, uvd,
+ frameNum);
+
+ switch (frame->frameState) {
+ case FrameState_Unused:
+ if (uvd->debug >= 2)
+ dev_info(&uvd->dev->dev, "%s: FrameState_Unused\n",
+ __func__);
+ return -EINVAL;
+ case FrameState_Ready:
+ case FrameState_Grabbing:
+ case FrameState_Error:
+ {
+ int ntries, signalPending;
+ redo:
+ if (!CAMERA_IS_OPERATIONAL(uvd)) {
+ if (uvd->debug >= 2)
+ dev_info(&uvd->dev->dev,
+ "%s: Camera is not operational (1)\n",
+ __func__);
+ return -EIO;
+ }
+ ntries = 0;
+ do {
+ RingQueue_InterruptibleSleepOn(&uvd->dp);
+ signalPending = signal_pending(current);
+ if (!CAMERA_IS_OPERATIONAL(uvd)) {
+ if (uvd->debug >= 2)
+ dev_info(&uvd->dev->dev,
+ "%s: Camera is not "
+ "operational (2)\n", __func__);
+ return -EIO;
+ }
+ assert(uvd->fbuf != NULL);
+ if (signalPending) {
+ if (uvd->debug >= 2)
+ dev_info(&uvd->dev->dev,
+ "%s: Signal=$%08x\n", __func__,
+ signalPending);
+ if (uvd->flags & FLAGS_RETRY_VIDIOCSYNC) {
+ usbvideo_TestPattern(uvd, 1, 0);
+ uvd->curframe = -1;
+ uvd->stats.frame_num++;
+ if (uvd->debug >= 2)
+ dev_info(&uvd->dev->dev,
+ "%s: Forced test "
+ "pattern screen\n",
+ __func__);
+ return 0;
+ } else {
+ /* Standard answer: Interrupted! */
+ if (uvd->debug >= 2)
+ dev_info(&uvd->dev->dev,
+ "%s: Interrupted!\n",
+ __func__);
+ return -EINTR;
+ }
+ } else {
+ /* No signals - we just got new data in dp queue */
+ if (uvd->flags & FLAGS_NO_DECODING)
+ usbvideo_CollectRawData(uvd, frame);
+ else if (VALID_CALLBACK(uvd, processData))
+ GET_CALLBACK(uvd, processData)(uvd, frame);
+ else
+ err("%s: processData not set", __func__);
+ }
+ } while (frame->frameState == FrameState_Grabbing);
+ if (uvd->debug >= 2) {
+ dev_info(&uvd->dev->dev,
+ "%s: Grabbing done; state=%d. (%lu. bytes)\n",
+ __func__, frame->frameState,
+ frame->seqRead_Length);
+ }
+ if (frame->frameState == FrameState_Error) {
+ int ret = usbvideo_NewFrame(uvd, frameNum);
+ if (ret < 0) {
+ err("%s: usbvideo_NewFrame() failed (%d.)", __func__, ret);
+ return ret;
+ }
+ goto redo;
+ }
+ /* Note that we fall through to meet our destiny below */
+ }
+ case FrameState_Done:
+ /*
+ * Do all necessary postprocessing of data prepared in
+ * "interrupt" code and the collecting code above. The
+ * frame gets marked as FrameState_Done by queue parsing code.
+ * This status means that we collected enough data and
+ * most likely processed it as we went through. However
+ * the data may need postprocessing, such as deinterlacing
+ * or picture adjustments implemented in software (horror!)
+ *
+ * As soon as the frame becomes "final" it gets promoted to
+ * FrameState_Done_Hold status where it will remain until the
+ * caller consumed all the video data from the frame. Then
+ * the empty shell of ex-frame is thrown out for dogs to eat.
+ * But we, worried about pets, will recycle the frame!
+ */
+ uvd->stats.frame_num++;
+ if ((uvd->flags & FLAGS_NO_DECODING) == 0) {
+ if (VALID_CALLBACK(uvd, postProcess))
+ GET_CALLBACK(uvd, postProcess)(uvd, frame);
+ if (frame->flags & USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST)
+ usbvideo_SoftwareContrastAdjustment(uvd, frame);
+ }
+ frame->frameState = FrameState_Done_Hold;
+ if (uvd->debug >= 2)
+ dev_info(&uvd->dev->dev,
+ "%s: Entered FrameState_Done_Hold state.\n",
+ __func__);
+ return 0;
+
+ case FrameState_Done_Hold:
+ /*
+ * We stay in this state indefinitely until someone external,
+ * like ioctl() or read() call finishes digesting the frame
+ * data. Then it will mark the frame as FrameState_Unused and
+ * it will be released back into the wild to roam freely.
+ */
+ if (uvd->debug >= 2)
+ dev_info(&uvd->dev->dev,
+ "%s: FrameState_Done_Hold state.\n",
+ __func__);
+ return 0;
+ }
+
+ /* Catch-all for other cases. We shall not be here. */
+ err("%s: Invalid state %d.", __func__, frame->frameState);
+ frame->frameState = FrameState_Unused;
+ return 0;
+}
+
+/*
+ * usbvideo_DeinterlaceFrame()
+ *
+ * This procedure deinterlaces the given frame. Some cameras produce
+ * only half of scanlines - sometimes only even lines, sometimes only
+ * odd lines. The deinterlacing method is stored in frame->deinterlace
+ * variable.
+ *
+ * Here we scan the frame vertically and replace missing scanlines with
+ * average between surrounding ones - before and after. If we have no
+ * line above then we just copy next line. Similarly, if we need to
+ * create a last line then preceding line is used.
+ */
+void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame)
+{
+ if ((uvd == NULL) || (frame == NULL))
+ return;
+
+ if ((frame->deinterlace == Deinterlace_FillEvenLines) ||
+ (frame->deinterlace == Deinterlace_FillOddLines))
+ {
+ const int v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
+ int i = (frame->deinterlace == Deinterlace_FillEvenLines) ? 0 : 1;
+
+ for (; i < VIDEOSIZE_Y(frame->request); i += 2) {
+ const unsigned char *fs1, *fs2;
+ unsigned char *fd;
+ int ip, in, j; /* Previous and next lines */
+
+ /*
+ * Need to average lines before and after 'i'.
+ * If we go out of bounds seeking those lines then
+ * we point back to existing line.
+ */
+ ip = i - 1; /* First, get rough numbers */
+ in = i + 1;
+
+ /* Now validate */
+ if (ip < 0)
+ ip = in;
+ if (in >= VIDEOSIZE_Y(frame->request))
+ in = ip;
+
+ /* Sanity check */
+ if ((ip < 0) || (in < 0) ||
+ (ip >= VIDEOSIZE_Y(frame->request)) ||
+ (in >= VIDEOSIZE_Y(frame->request)))
+ {
+ err("Error: ip=%d. in=%d. req.height=%ld.",
+ ip, in, VIDEOSIZE_Y(frame->request));
+ break;
+ }
+
+ /* Now we need to average lines 'ip' and 'in' to produce line 'i' */
+ fs1 = frame->data + (v4l_linesize * ip);
+ fs2 = frame->data + (v4l_linesize * in);
+ fd = frame->data + (v4l_linesize * i);
+
+ /* Average lines around destination */
+ for (j=0; j < v4l_linesize; j++) {
+ fd[j] = (unsigned char)((((unsigned) fs1[j]) +
+ ((unsigned)fs2[j])) >> 1);
+ }
+ }
+ }
+
+ /* Optionally display statistics on the screen */
+ if (uvd->flags & FLAGS_OVERLAY_STATS)
+ usbvideo_OverlayStats(uvd, frame);
+}
+
+EXPORT_SYMBOL(usbvideo_DeinterlaceFrame);
+
+/*
+ * usbvideo_SoftwareContrastAdjustment()
+ *
+ * This code adjusts the contrast of the frame, assuming RGB24 format.
+ * As most software image processing, this job is CPU-intensive.
+ * Get a camera that supports hardware adjustment!
+ *
+ * History:
+ * 09-Feb-2001 Created.
+ */
+static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
+ struct usbvideo_frame *frame)
+{
+ int i, j, v4l_linesize;
+ signed long adj;
+ const int ccm = 128; /* Color correction median - see below */
+
+ if ((uvd == NULL) || (frame == NULL)) {
+ err("%s: Illegal call.", __func__);
+ return;
+ }
+ adj = (uvd->vpic.contrast - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/
+ RESTRICT_TO_RANGE(adj, -ccm, ccm+1);
+ if (adj == 0) {
+ /* In rare case of no adjustment */
+ return;
+ }
+ v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
+ for (i=0; i < VIDEOSIZE_Y(frame->request); i++) {
+ unsigned char *fd = frame->data + (v4l_linesize * i);
+ for (j=0; j < v4l_linesize; j++) {
+ signed long v = (signed long) fd[j];
+ /* Magnify up to 2 times, reduce down to zero */
+ v = 128 + ((ccm + adj) * (v - 128)) / ccm;
+ RESTRICT_TO_RANGE(v, 0, 0xFF); /* Must flatten tails */
+ fd[j] = (unsigned char) v;
+ }
+ }
+}
+
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef usbvideo_h
+#define usbvideo_h
+
+#include <linux/videodev.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+
+/* Most helpful debugging aid */
+#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__))))
+
+#define USBVIDEO_REPORT_STATS 1 /* Set to 0 to block statistics on close */
+
+/* Bit flags (options) */
+#define FLAGS_RETRY_VIDIOCSYNC (1 << 0)
+#define FLAGS_MONOCHROME (1 << 1)
+#define FLAGS_DISPLAY_HINTS (1 << 2)
+#define FLAGS_OVERLAY_STATS (1 << 3)
+#define FLAGS_FORCE_TESTPATTERN (1 << 4)
+#define FLAGS_SEPARATE_FRAMES (1 << 5)
+#define FLAGS_CLEAN_FRAMES (1 << 6)
+#define FLAGS_NO_DECODING (1 << 7)
+
+/* Bit flags for frames (apply to the frame where they are specified) */
+#define USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST (1 << 0)
+
+/* Camera capabilities (maximum) */
+#define CAMERA_URB_FRAMES 32
+#define CAMERA_MAX_ISO_PACKET 1023 /* 1022 actually sent by camera */
+#define FRAMES_PER_DESC (CAMERA_URB_FRAMES)
+#define FRAME_SIZE_PER_DESC (CAMERA_MAX_ISO_PACKET)
+
+/* This macro restricts an int variable to an inclusive range */
+#define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }
+
+#define V4L_BYTES_PER_PIXEL 3 /* Because we produce RGB24 */
+
+/*
+ * Use this macro to construct constants for different video sizes.
+ * We have to deal with different video sizes that have to be
+ * configured in the device or compared against when we receive
+ * a data. Normally one would define a bunch of VIDEOSIZE_x_by_y
+ * #defines and that's the end of story. However this solution
+ * does not allow to convert between real pixel sizes and the
+ * constant (integer) value that may be used to tag a frame or
+ * whatever. The set of macros below constructs videosize constants
+ * from the pixel size and allows to reconstruct the pixel size
+ * from the combined value later.
+ */
+#define VIDEOSIZE(x,y) (((x) & 0xFFFFL) | (((y) & 0xFFFFL) << 16))
+#define VIDEOSIZE_X(vs) ((vs) & 0xFFFFL)
+#define VIDEOSIZE_Y(vs) (((vs) >> 16) & 0xFFFFL)
+typedef unsigned long videosize_t;
+
+/*
+ * This macro checks if the camera is still operational. The 'uvd'
+ * pointer must be valid, uvd->dev must be valid, we are not
+ * removing the device and the device has not erred on us.
+ */
+#define CAMERA_IS_OPERATIONAL(uvd) (\
+ (uvd != NULL) && \
+ ((uvd)->dev != NULL) && \
+ ((uvd)->last_error == 0) && \
+ (!(uvd)->remove_pending))
+
+/*
+ * We use macros to do YUV -> RGB conversion because this is
+ * very important for speed and totally unimportant for size.
+ *
+ * YUV -> RGB Conversion
+ * ---------------------
+ *
+ * B = 1.164*(Y-16) + 2.018*(V-128)
+ * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128)
+ * R = 1.164*(Y-16) + 1.596*(U-128)
+ *
+ * If you fancy integer arithmetics (as you should), hear this:
+ *
+ * 65536*B = 76284*(Y-16) + 132252*(V-128)
+ * 65536*G = 76284*(Y-16) - 53281*(U-128) - 25625*(V-128)
+ * 65536*R = 76284*(Y-16) + 104595*(U-128)
+ *
+ * Make sure the output values are within [0..255] range.
+ */
+#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x)))
+#define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \
+ int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
+ mm_y = (my) - 16; \
+ mm_u = (mu) - 128; \
+ mm_v = (mv) - 128; \
+ mm_yc= mm_y * 76284; \
+ mm_b = (mm_yc + 132252*mm_v ) >> 16; \
+ mm_g = (mm_yc - 53281*mm_u - 25625*mm_v ) >> 16; \
+ mm_r = (mm_yc + 104595*mm_u ) >> 16; \
+ mb = LIMIT_RGB(mm_b); \
+ mg = LIMIT_RGB(mm_g); \
+ mr = LIMIT_RGB(mm_r); \
+}
+
+#define RING_QUEUE_SIZE (128*1024) /* Must be a power of 2 */
+#define RING_QUEUE_ADVANCE_INDEX(rq,ind,n) (rq)->ind = ((rq)->ind + (n)) & ((rq)->length-1)
+#define RING_QUEUE_DEQUEUE_BYTES(rq,n) RING_QUEUE_ADVANCE_INDEX(rq,ri,n)
+#define RING_QUEUE_PEEK(rq,ofs) ((rq)->queue[((ofs) + (rq)->ri) & ((rq)->length-1)])
+
+struct RingQueue {
+ unsigned char *queue; /* Data from the Isoc data pump */
+ int length; /* How many bytes allocated for the queue */
+ int wi; /* That's where we write */
+ int ri; /* Read from here until you hit write index */
+ wait_queue_head_t wqh; /* Processes waiting */
+};
+
+enum ScanState {
+ ScanState_Scanning, /* Scanning for header */
+ ScanState_Lines /* Parsing lines */
+};
+
+/* Completion states of the data parser */
+enum ParseState {
+ scan_Continue, /* Just parse next item */
+ scan_NextFrame, /* Frame done, send it to V4L */
+ scan_Out, /* Not enough data for frame */
+ scan_EndParse /* End parsing */
+};
+
+enum FrameState {
+ FrameState_Unused, /* Unused (no MCAPTURE) */
+ FrameState_Ready, /* Ready to start grabbing */
+ FrameState_Grabbing, /* In the process of being grabbed into */
+ FrameState_Done, /* Finished grabbing, but not been synced yet */
+ FrameState_Done_Hold, /* Are syncing or reading */
+ FrameState_Error, /* Something bad happened while processing */
+};
+
+/*
+ * Some frames may contain only even or odd lines. This type
+ * specifies what type of deinterlacing is required.
+ */
+enum Deinterlace {
+ Deinterlace_None=0,
+ Deinterlace_FillOddLines,
+ Deinterlace_FillEvenLines
+};
+
+#define USBVIDEO_NUMFRAMES 2 /* How many frames we work with */
+#define USBVIDEO_NUMSBUF 2 /* How many URBs linked in a ring */
+
+/* This structure represents one Isoc request - URB and buffer */
+struct usbvideo_sbuf {
+ char *data;
+ struct urb *urb;
+};
+
+struct usbvideo_frame {
+ char *data; /* Frame buffer */
+ unsigned long header; /* Significant bits from the header */
+
+ videosize_t canvas; /* The canvas (max. image) allocated */
+ videosize_t request; /* That's what the application asked for */
+ unsigned short palette; /* The desired format */
+
+ enum FrameState frameState;/* State of grabbing */
+ enum ScanState scanstate; /* State of scanning */
+ enum Deinterlace deinterlace;
+ int flags; /* USBVIDEO_FRAME_FLAG_xxx bit flags */
+
+ int curline; /* Line of frame we're working on */
+
+ long seqRead_Length; /* Raw data length of frame */
+ long seqRead_Index; /* Amount of data that has been already read */
+
+ void *user; /* Additional data that user may need */
+};
+
+/* Statistics that can be overlaid on screen */
+struct usbvideo_statistics {
+ unsigned long frame_num; /* Sequential number of the frame */
+ unsigned long urb_count; /* How many URBs we received so far */
+ unsigned long urb_length; /* Length of last URB */
+ unsigned long data_count; /* How many bytes we received */
+ unsigned long header_count; /* How many frame headers we found */
+ unsigned long iso_skip_count; /* How many empty ISO packets received */
+ unsigned long iso_err_count; /* How many bad ISO packets received */
+};
+
+struct usbvideo;
+
+struct uvd {
+ struct video_device vdev; /* Must be the first field! */
+ struct usb_device *dev;
+ struct usbvideo *handle; /* Points back to the struct usbvideo */
+ void *user_data; /* Camera-dependent data */
+ int user_size; /* Size of that camera-dependent data */
+ int debug; /* Debug level for usbvideo */
+ unsigned char iface; /* Video interface number */
+ unsigned char video_endp;
+ unsigned char ifaceAltActive;
+ unsigned char ifaceAltInactive; /* Alt settings */
+ unsigned long flags; /* FLAGS_USBVIDEO_xxx */
+ unsigned long paletteBits; /* Which palettes we accept? */
+ unsigned short defaultPalette; /* What palette to use for read() */
+ struct mutex lock;
+ int user; /* user count for exclusive use */
+
+ videosize_t videosize; /* Current setting */
+ videosize_t canvas; /* This is the width,height of the V4L canvas */
+ int max_frame_size; /* Bytes in one video frame */
+
+ int uvd_used; /* Is this structure in use? */
+ int streaming; /* Are we streaming Isochronous? */
+ int grabbing; /* Are we grabbing? */
+ int settingsAdjusted; /* Have we adjusted contrast etc.? */
+ int last_error; /* What calamity struck us? */
+
+ char *fbuf; /* Videodev buffer area */
+ int fbuf_size; /* Videodev buffer size */
+
+ int curframe;
+ int iso_packet_len; /* Videomode-dependent, saves bus bandwidth */
+
+ struct RingQueue dp; /* Isoc data pump */
+ struct usbvideo_frame frame[USBVIDEO_NUMFRAMES];
+ struct usbvideo_sbuf sbuf[USBVIDEO_NUMSBUF];
+
+ volatile int remove_pending; /* If set then about to exit */
+
+ struct video_picture vpic, vpic_old; /* Picture settings */
+ struct video_capability vcap; /* Video capabilities */
+ struct video_channel vchan; /* May be used for tuner support */
+ struct usbvideo_statistics stats;
+ char videoName[32]; /* Holds name like "video7" */
+};
+
+/*
+ * usbvideo callbacks (virtual methods). They are set when usbvideo
+ * services are registered. All of these default to NULL, except those
+ * that default to usbvideo-provided methods.
+ */
+struct usbvideo_cb {
+ int (*probe)(struct usb_interface *, const struct usb_device_id *);
+ void (*userFree)(struct uvd *);
+ void (*disconnect)(struct usb_interface *);
+ int (*setupOnOpen)(struct uvd *);
+ void (*videoStart)(struct uvd *);
+ void (*videoStop)(struct uvd *);
+ void (*processData)(struct uvd *, struct usbvideo_frame *);
+ void (*postProcess)(struct uvd *, struct usbvideo_frame *);
+ void (*adjustPicture)(struct uvd *);
+ int (*getFPS)(struct uvd *);
+ int (*overlayHook)(struct uvd *, struct usbvideo_frame *);
+ int (*getFrame)(struct uvd *, int);
+ int (*startDataPump)(struct uvd *uvd);
+ void (*stopDataPump)(struct uvd *uvd);
+ int (*setVideoMode)(struct uvd *uvd, struct video_window *vw);
+};
+
+struct usbvideo {
+ int num_cameras; /* As allocated */
+ struct usb_driver usbdrv; /* Interface to the USB stack */
+ char drvName[80]; /* Driver name */
+ struct mutex lock; /* Mutex protecting camera structures */
+ struct usbvideo_cb cb; /* Table of callbacks (virtual methods) */
+ struct video_device vdt; /* Video device template */
+ struct uvd *cam; /* Array of camera structures */
+ struct module *md_module; /* Minidriver module */
+};
+
+
+/*
+ * This macro retrieves callback address from the struct uvd object.
+ * No validity checks are done here, so be sure to check the
+ * callback beforehand with VALID_CALLBACK.
+ */
+#define GET_CALLBACK(uvd,cbName) ((uvd)->handle->cb.cbName)
+
+/*
+ * This macro returns either callback pointer or NULL. This is safe
+ * macro, meaning that most of components of data structures involved
+ * may be NULL - this only results in NULL being returned. You may
+ * wish to use this macro to make sure that the callback is callable.
+ * However keep in mind that those checks take time.
+ */
+#define VALID_CALLBACK(uvd,cbName) ((((uvd) != NULL) && \
+ ((uvd)->handle != NULL)) ? GET_CALLBACK(uvd,cbName) : NULL)
+
+int RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len);
+int RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n);
+void RingQueue_WakeUpInterruptible(struct RingQueue *rq);
+void RingQueue_Flush(struct RingQueue *rq);
+
+static inline int RingQueue_GetLength(const struct RingQueue *rq)
+{
+ return (rq->wi - rq->ri + rq->length) & (rq->length-1);
+}
+
+static inline int RingQueue_GetFreeSpace(const struct RingQueue *rq)
+{
+ return rq->length - RingQueue_GetLength(rq);
+}
+
+void usbvideo_DrawLine(
+ struct usbvideo_frame *frame,
+ int x1, int y1,
+ int x2, int y2,
+ unsigned char cr, unsigned char cg, unsigned char cb);
+void usbvideo_HexDump(const unsigned char *data, int len);
+void usbvideo_SayAndWait(const char *what);
+void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode);
+
+/* Memory allocation routines */
+unsigned long usbvideo_kvirt_to_pa(unsigned long adr);
+
+int usbvideo_register(
+ struct usbvideo **pCams,
+ const int num_cams,
+ const int num_extra,
+ const char *driverName,
+ const struct usbvideo_cb *cbTable,
+ struct module *md,
+ const struct usb_device_id *id_table);
+struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams);
+int usbvideo_RegisterVideoDevice(struct uvd *uvd);
+void usbvideo_Deregister(struct usbvideo **uvt);
+
+int usbvideo_v4l_initialize(struct video_device *dev);
+
+void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame);
+
+/*
+ * This code performs bounds checking - use it when working with
+ * new formats, or else you may get oopses all over the place.
+ * If pixel falls out of bounds then it gets shoved back (as close
+ * to place of offence as possible) and is painted bright red.
+ *
+ * There are two important concepts: frame width, height and
+ * V4L canvas width, height. The former is the area requested by
+ * the application -for this very frame-. The latter is the largest
+ * possible frame that we can serve (we advertise that via V4L ioctl).
+ * The frame data is expected to be formatted as lines of length
+ * VIDEOSIZE_X(fr->request), total VIDEOSIZE_Y(frame->request) lines.
+ */
+static inline void RGB24_PUTPIXEL(
+ struct usbvideo_frame *fr,
+ int ix, int iy,
+ unsigned char vr,
+ unsigned char vg,
+ unsigned char vb)
+{
+ register unsigned char *pf;
+ int limiter = 0, mx, my;
+ mx = ix;
+ my = iy;
+ if (mx < 0) {
+ mx=0;
+ limiter++;
+ } else if (mx >= VIDEOSIZE_X((fr)->request)) {
+ mx= VIDEOSIZE_X((fr)->request) - 1;
+ limiter++;
+ }
+ if (my < 0) {
+ my = 0;
+ limiter++;
+ } else if (my >= VIDEOSIZE_Y((fr)->request)) {
+ my = VIDEOSIZE_Y((fr)->request) - 1;
+ limiter++;
+ }
+ pf = (fr)->data + V4L_BYTES_PER_PIXEL*((iy)*VIDEOSIZE_X((fr)->request) + (ix));
+ if (limiter) {
+ *pf++ = 0;
+ *pf++ = 0;
+ *pf++ = 0xFF;
+ } else {
+ *pf++ = (vb);
+ *pf++ = (vg);
+ *pf++ = (vr);
+ }
+}
+
+#endif /* usbvideo_h */
--- /dev/null
+/*
+ * USB ViCam WebCam driver
+ * Copyright (c) 2002 Joe Burks (jburks@wavicle.org),
+ * Christopher L Cheney (ccheney@cheney.cx),
+ * Pavel Machek (pavel@ucw.cz),
+ * John Tyner (jtyner@cs.ucr.edu),
+ * Monroe Williams (monroe@pobox.com)
+ *
+ * Supports 3COM HomeConnect PC Digital WebCam
+ * Supports Compro PS39U WebCam
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * This source code is based heavily on the CPiA webcam driver which was
+ * written by Peter Pregler, Scott J. Bertin and Johannes Erdfelt
+ *
+ * Portions of this code were also copied from usbvideo.c
+ *
+ * Special thanks to the whole team at Sourceforge for help making
+ * this driver become a reality. Notably:
+ * Andy Armstrong who reverse engineered the color encoding and
+ * Pavel Machek and Chris Cheney who worked on reverse engineering the
+ * camera controls and wrote the first generation driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/videodev.h>
+#include <linux/usb.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/firmware.h>
+#include <linux/ihex.h>
+#include "usbvideo.h"
+
+// #define VICAM_DEBUG
+
+#ifdef VICAM_DEBUG
+#define ADBG(lineno,fmt,args...) printk(fmt, jiffies, __func__, lineno, ##args)
+#define DBG(fmt,args...) ADBG((__LINE__),KERN_DEBUG __FILE__"(%ld):%s (%d):"fmt,##args)
+#else
+#define DBG(fmn,args...) do {} while(0)
+#endif
+
+#define DRIVER_AUTHOR "Joe Burks, jburks@wavicle.org"
+#define DRIVER_DESC "ViCam WebCam Driver"
+
+/* Define these values to match your device */
+#define USB_VICAM_VENDOR_ID 0x04c1
+#define USB_VICAM_PRODUCT_ID 0x009d
+#define USB_COMPRO_VENDOR_ID 0x0602
+#define USB_COMPRO_PRODUCT_ID 0x1001
+
+#define VICAM_BYTES_PER_PIXEL 3
+#define VICAM_MAX_READ_SIZE (512*242+128)
+#define VICAM_MAX_FRAME_SIZE (VICAM_BYTES_PER_PIXEL*320*240)
+#define VICAM_FRAMES 2
+
+#define VICAM_HEADER_SIZE 64
+
+/* rvmalloc / rvfree copied from usbvideo.c
+ *
+ * Not sure why these are not yet non-statics which I can reference through
+ * usbvideo.h the same as it is in 2.4.20. I bet this will get fixed sometime
+ * in the future.
+ *
+*/
+static void *rvmalloc(unsigned long size)
+{
+ void *mem;
+ unsigned long adr;
+
+ size = PAGE_ALIGN(size);
+ mem = vmalloc_32(size);
+ if (!mem)
+ return NULL;
+
+ memset(mem, 0, size); /* Clear the ram out, no junk to the user */
+ adr = (unsigned long) mem;
+ while (size > 0) {
+ SetPageReserved(vmalloc_to_page((void *)adr));
+ adr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+
+ return mem;
+}
+
+static void rvfree(void *mem, unsigned long size)
+{
+ unsigned long adr;
+
+ if (!mem)
+ return;
+
+ adr = (unsigned long) mem;
+ while ((long) size > 0) {
+ ClearPageReserved(vmalloc_to_page((void *)adr));
+ adr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+ vfree(mem);
+}
+
+struct vicam_camera {
+ u16 shutter_speed; // capture shutter speed
+ u16 gain; // capture gain
+
+ u8 *raw_image; // raw data captured from the camera
+ u8 *framebuf; // processed data in RGB24 format
+ u8 *cntrlbuf; // area used to send control msgs
+
+ struct video_device vdev; // v4l video device
+ struct usb_device *udev; // usb device
+
+ /* guard against simultaneous accesses to the camera */
+ struct mutex cam_lock;
+
+ int is_initialized;
+ u8 open_count;
+ u8 bulkEndpoint;
+ int needsDummyRead;
+};
+
+static int vicam_probe( struct usb_interface *intf, const struct usb_device_id *id);
+static void vicam_disconnect(struct usb_interface *intf);
+static void read_frame(struct vicam_camera *cam, int framenum);
+static void vicam_decode_color(const u8 *, u8 *);
+
+static int __send_control_msg(struct vicam_camera *cam,
+ u8 request,
+ u16 value,
+ u16 index,
+ unsigned char *cp,
+ u16 size)
+{
+ int status;
+
+ /* cp must be memory that has been allocated by kmalloc */
+
+ status = usb_control_msg(cam->udev,
+ usb_sndctrlpipe(cam->udev, 0),
+ request,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, value, index,
+ cp, size, 1000);
+
+ status = min(status, 0);
+
+ if (status < 0) {
+ printk(KERN_INFO "Failed sending control message, error %d.\n",
+ status);
+ }
+
+ return status;
+}
+
+static int send_control_msg(struct vicam_camera *cam,
+ u8 request,
+ u16 value,
+ u16 index,
+ unsigned char *cp,
+ u16 size)
+{
+ int status = -ENODEV;
+ mutex_lock(&cam->cam_lock);
+ if (cam->udev) {
+ status = __send_control_msg(cam, request, value,
+ index, cp, size);
+ }
+ mutex_unlock(&cam->cam_lock);
+ return status;
+}
+static int
+initialize_camera(struct vicam_camera *cam)
+{
+ int err;
+ const struct ihex_binrec *rec;
+ const struct firmware *uninitialized_var(fw);
+
+ err = request_ihex_firmware(&fw, "vicam/firmware.fw", &cam->udev->dev);
+ if (err) {
+ printk(KERN_ERR "Failed to load \"vicam/firmware.fw\": %d\n",
+ err);
+ return err;
+ }
+
+ for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) {
+ memcpy(cam->cntrlbuf, rec->data, be16_to_cpu(rec->len));
+
+ err = send_control_msg(cam, 0xff, 0, 0,
+ cam->cntrlbuf, be16_to_cpu(rec->len));
+ if (err)
+ break;
+ }
+
+ release_firmware(fw);
+
+ return err;
+}
+
+static int
+set_camera_power(struct vicam_camera *cam, int state)
+{
+ int status;
+
+ if ((status = send_control_msg(cam, 0x50, state, 0, NULL, 0)) < 0)
+ return status;
+
+ if (state) {
+ send_control_msg(cam, 0x55, 1, 0, NULL, 0);
+ }
+
+ return 0;
+}
+
+static long
+vicam_ioctl(struct file *file, unsigned int ioctlnr, unsigned long arg)
+{
+ void __user *user_arg = (void __user *)arg;
+ struct vicam_camera *cam = file->private_data;
+ long retval = 0;
+
+ if (!cam)
+ return -ENODEV;
+
+ switch (ioctlnr) {
+ /* query capabilities */
+ case VIDIOCGCAP:
+ {
+ struct video_capability b;
+
+ DBG("VIDIOCGCAP\n");
+ memset(&b, 0, sizeof(b));
+ strcpy(b.name, "ViCam-based Camera");
+ b.type = VID_TYPE_CAPTURE;
+ b.channels = 1;
+ b.audios = 0;
+ b.maxwidth = 320; /* VIDEOSIZE_CIF */
+ b.maxheight = 240;
+ b.minwidth = 320; /* VIDEOSIZE_48_48 */
+ b.minheight = 240;
+
+ if (copy_to_user(user_arg, &b, sizeof(b)))
+ retval = -EFAULT;
+
+ break;
+ }
+ /* get/set video source - we are a camera and nothing else */
+ case VIDIOCGCHAN:
+ {
+ struct video_channel v;
+
+ DBG("VIDIOCGCHAN\n");
+ if (copy_from_user(&v, user_arg, sizeof(v))) {
+ retval = -EFAULT;
+ break;
+ }
+ if (v.channel != 0) {
+ retval = -EINVAL;
+ break;
+ }
+
+ v.channel = 0;
+ strcpy(v.name, "Camera");
+ v.tuners = 0;
+ v.flags = 0;
+ v.type = VIDEO_TYPE_CAMERA;
+ v.norm = 0;
+
+ if (copy_to_user(user_arg, &v, sizeof(v)))
+ retval = -EFAULT;
+ break;
+ }
+
+ case VIDIOCSCHAN:
+ {
+ int v;
+
+ if (copy_from_user(&v, user_arg, sizeof(v)))
+ retval = -EFAULT;
+ DBG("VIDIOCSCHAN %d\n", v);
+
+ if (retval == 0 && v != 0)
+ retval = -EINVAL;
+
+ break;
+ }
+
+ /* image properties */
+ case VIDIOCGPICT:
+ {
+ struct video_picture vp;
+ DBG("VIDIOCGPICT\n");
+ memset(&vp, 0, sizeof (struct video_picture));
+ vp.brightness = cam->gain << 8;
+ vp.depth = 24;
+ vp.palette = VIDEO_PALETTE_RGB24;
+ if (copy_to_user(user_arg, &vp, sizeof (struct video_picture)))
+ retval = -EFAULT;
+ break;
+ }
+
+ case VIDIOCSPICT:
+ {
+ struct video_picture vp;
+
+ if (copy_from_user(&vp, user_arg, sizeof(vp))) {
+ retval = -EFAULT;
+ break;
+ }
+
+ DBG("VIDIOCSPICT depth = %d, pal = %d\n", vp.depth,
+ vp.palette);
+
+ cam->gain = vp.brightness >> 8;
+
+ if (vp.depth != 24
+ || vp.palette != VIDEO_PALETTE_RGB24)
+ retval = -EINVAL;
+
+ break;
+ }
+
+ /* get/set capture window */
+ case VIDIOCGWIN:
+ {
+ struct video_window vw;
+ vw.x = 0;
+ vw.y = 0;
+ vw.width = 320;
+ vw.height = 240;
+ vw.chromakey = 0;
+ vw.flags = 0;
+ vw.clips = NULL;
+ vw.clipcount = 0;
+
+ DBG("VIDIOCGWIN\n");
+
+ if (copy_to_user(user_arg, (void *)&vw, sizeof(vw)))
+ retval = -EFAULT;
+
+ // I'm not sure what the deal with a capture window is, it is very poorly described
+ // in the doc. So I won't support it now.
+ break;
+ }
+
+ case VIDIOCSWIN:
+ {
+
+ struct video_window vw;
+
+ if (copy_from_user(&vw, user_arg, sizeof(vw))) {
+ retval = -EFAULT;
+ break;
+ }
+
+ DBG("VIDIOCSWIN %d x %d\n", vw.width, vw.height);
+
+ if ( vw.width != 320 || vw.height != 240 )
+ retval = -EFAULT;
+
+ break;
+ }
+
+ /* mmap interface */
+ case VIDIOCGMBUF:
+ {
+ struct video_mbuf vm;
+ int i;
+
+ DBG("VIDIOCGMBUF\n");
+ memset(&vm, 0, sizeof (vm));
+ vm.size =
+ VICAM_MAX_FRAME_SIZE * VICAM_FRAMES;
+ vm.frames = VICAM_FRAMES;
+ for (i = 0; i < VICAM_FRAMES; i++)
+ vm.offsets[i] = VICAM_MAX_FRAME_SIZE * i;
+
+ if (copy_to_user(user_arg, (void *)&vm, sizeof(vm)))
+ retval = -EFAULT;
+
+ break;
+ }
+
+ case VIDIOCMCAPTURE:
+ {
+ struct video_mmap vm;
+ // int video_size;
+
+ if (copy_from_user((void *)&vm, user_arg, sizeof(vm))) {
+ retval = -EFAULT;
+ break;
+ }
+
+ DBG("VIDIOCMCAPTURE frame=%d, height=%d, width=%d, format=%d.\n",vm.frame,vm.width,vm.height,vm.format);
+
+ if ( vm.frame >= VICAM_FRAMES || vm.format != VIDEO_PALETTE_RGB24 )
+ retval = -EINVAL;
+
+ // in theory right here we'd start the image capturing
+ // (fill in a bulk urb and submit it asynchronously)
+ //
+ // Instead we're going to do a total hack job for now and
+ // retrieve the frame in VIDIOCSYNC
+
+ break;
+ }
+
+ case VIDIOCSYNC:
+ {
+ int frame;
+
+ if (copy_from_user((void *)&frame, user_arg, sizeof(int))) {
+ retval = -EFAULT;
+ break;
+ }
+ DBG("VIDIOCSYNC: %d\n", frame);
+
+ read_frame(cam, frame);
+ vicam_decode_color(cam->raw_image,
+ cam->framebuf +
+ frame * VICAM_MAX_FRAME_SIZE );
+
+ break;
+ }
+
+ /* pointless to implement overlay with this camera */
+ case VIDIOCCAPTURE:
+ case VIDIOCGFBUF:
+ case VIDIOCSFBUF:
+ case VIDIOCKEY:
+ retval = -EINVAL;
+ break;
+
+ /* tuner interface - we have none */
+ case VIDIOCGTUNER:
+ case VIDIOCSTUNER:
+ case VIDIOCGFREQ:
+ case VIDIOCSFREQ:
+ retval = -EINVAL;
+ break;
+
+ /* audio interface - we have none */
+ case VIDIOCGAUDIO:
+ case VIDIOCSAUDIO:
+ retval = -EINVAL;
+ break;
+ default:
+ retval = -ENOIOCTLCMD;
+ break;
+ }
+
+ return retval;
+}
+
+static int
+vicam_open(struct file *file)
+{
+ struct vicam_camera *cam = video_drvdata(file);
+
+ DBG("open\n");
+
+ if (!cam) {
+ printk(KERN_ERR
+ "vicam video_device improperly initialized");
+ return -EINVAL;
+ }
+
+ /* cam_lock/open_count protects us from simultaneous opens
+ * ... for now. we probably shouldn't rely on this fact forever.
+ */
+
+ mutex_lock(&cam->cam_lock);
+ if (cam->open_count > 0) {
+ printk(KERN_INFO
+ "vicam_open called on already opened camera");
+ mutex_unlock(&cam->cam_lock);
+ return -EBUSY;
+ }
+
+ cam->raw_image = kmalloc(VICAM_MAX_READ_SIZE, GFP_KERNEL);
+ if (!cam->raw_image) {
+ mutex_unlock(&cam->cam_lock);
+ return -ENOMEM;
+ }
+
+ cam->framebuf = rvmalloc(VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
+ if (!cam->framebuf) {
+ kfree(cam->raw_image);
+ mutex_unlock(&cam->cam_lock);
+ return -ENOMEM;
+ }
+
+ cam->cntrlbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!cam->cntrlbuf) {
+ kfree(cam->raw_image);
+ rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
+ mutex_unlock(&cam->cam_lock);
+ return -ENOMEM;
+ }
+
+ cam->needsDummyRead = 1;
+ cam->open_count++;
+
+ file->private_data = cam;
+ mutex_unlock(&cam->cam_lock);
+
+
+ // First upload firmware, then turn the camera on
+
+ if (!cam->is_initialized) {
+ initialize_camera(cam);
+
+ cam->is_initialized = 1;
+ }
+
+ set_camera_power(cam, 1);
+
+ return 0;
+}
+
+static int
+vicam_close(struct file *file)
+{
+ struct vicam_camera *cam = file->private_data;
+ int open_count;
+ struct usb_device *udev;
+
+ DBG("close\n");
+
+ /* it's not the end of the world if
+ * we fail to turn the camera off.
+ */
+
+ set_camera_power(cam, 0);
+
+ kfree(cam->raw_image);
+ rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
+ kfree(cam->cntrlbuf);
+
+ mutex_lock(&cam->cam_lock);
+
+ cam->open_count--;
+ open_count = cam->open_count;
+ udev = cam->udev;
+
+ mutex_unlock(&cam->cam_lock);
+
+ if (!open_count && !udev) {
+ kfree(cam);
+ }
+
+ return 0;
+}
+
+static void vicam_decode_color(const u8 *data, u8 *rgb)
+{
+ /* vicam_decode_color - Convert from Vicam Y-Cr-Cb to RGB
+ * Copyright (C) 2002 Monroe Williams (monroe@pobox.com)
+ */
+
+ int i, prevY, nextY;
+
+ prevY = 512;
+ nextY = 512;
+
+ data += VICAM_HEADER_SIZE;
+
+ for( i = 0; i < 240; i++, data += 512 ) {
+ const int y = ( i * 242 ) / 240;
+
+ int j, prevX, nextX;
+ int Y, Cr, Cb;
+
+ if ( y == 242 - 1 ) {
+ nextY = -512;
+ }
+
+ prevX = 1;
+ nextX = 1;
+
+ for ( j = 0; j < 320; j++, rgb += 3 ) {
+ const int x = ( j * 512 ) / 320;
+ const u8 * const src = &data[x];
+
+ if ( x == 512 - 1 ) {
+ nextX = -1;
+ }
+
+ Cr = ( src[prevX] - src[0] ) +
+ ( src[nextX] - src[0] );
+ Cr /= 2;
+
+ Cb = ( src[prevY] - src[prevX + prevY] ) +
+ ( src[prevY] - src[nextX + prevY] ) +
+ ( src[nextY] - src[prevX + nextY] ) +
+ ( src[nextY] - src[nextX + nextY] );
+ Cb /= 4;
+
+ Y = 1160 * ( src[0] + ( Cr / 2 ) - 16 );
+
+ if ( i & 1 ) {
+ int Ct = Cr;
+ Cr = Cb;
+ Cb = Ct;
+ }
+
+ if ( ( x ^ i ) & 1 ) {
+ Cr = -Cr;
+ Cb = -Cb;
+ }
+
+ rgb[0] = clamp( ( ( Y + ( 2017 * Cb ) ) +
+ 500 ) / 900, 0, 255 );
+ rgb[1] = clamp( ( ( Y - ( 392 * Cb ) -
+ ( 813 * Cr ) ) +
+ 500 ) / 1000, 0, 255 );
+ rgb[2] = clamp( ( ( Y + ( 1594 * Cr ) ) +
+ 500 ) / 1300, 0, 255 );
+
+ prevX = -1;
+ }
+
+ prevY = -512;
+ }
+}
+
+static void
+read_frame(struct vicam_camera *cam, int framenum)
+{
+ unsigned char *request = cam->cntrlbuf;
+ int realShutter;
+ int n;
+ int actual_length;
+
+ if (cam->needsDummyRead) {
+ cam->needsDummyRead = 0;
+ read_frame(cam, framenum);
+ }
+
+ memset(request, 0, 16);
+ request[0] = cam->gain; // 0 = 0% gain, FF = 100% gain
+
+ request[1] = 0; // 512x242 capture
+
+ request[2] = 0x90; // the function of these two bytes
+ request[3] = 0x07; // is not yet understood
+
+ if (cam->shutter_speed > 60) {
+ // Short exposure
+ realShutter =
+ ((-15631900 / cam->shutter_speed) + 260533) / 1000;
+ request[4] = realShutter & 0xFF;
+ request[5] = (realShutter >> 8) & 0xFF;
+ request[6] = 0x03;
+ request[7] = 0x01;
+ } else {
+ // Long exposure
+ realShutter = 15600 / cam->shutter_speed - 1;
+ request[4] = 0;
+ request[5] = 0;
+ request[6] = realShutter & 0xFF;
+ request[7] = realShutter >> 8;
+ }
+
+ // Per John Markus Bjørndalen, byte at index 8 causes problems if it isn't 0
+ request[8] = 0;
+ // bytes 9-15 do not seem to affect exposure or image quality
+
+ mutex_lock(&cam->cam_lock);
+
+ if (!cam->udev) {
+ goto done;
+ }
+
+ n = __send_control_msg(cam, 0x51, 0x80, 0, request, 16);
+
+ if (n < 0) {
+ printk(KERN_ERR
+ " Problem sending frame capture control message");
+ goto done;
+ }
+
+ n = usb_bulk_msg(cam->udev,
+ usb_rcvbulkpipe(cam->udev, cam->bulkEndpoint),
+ cam->raw_image,
+ 512 * 242 + 128, &actual_length, 10000);
+
+ if (n < 0) {
+ printk(KERN_ERR "Problem during bulk read of frame data: %d\n",
+ n);
+ }
+
+ done:
+ mutex_unlock(&cam->cam_lock);
+}
+
+static ssize_t
+vicam_read( struct file *file, char __user *buf, size_t count, loff_t *ppos )
+{
+ struct vicam_camera *cam = file->private_data;
+
+ DBG("read %d bytes.\n", (int) count);
+
+ if (*ppos >= VICAM_MAX_FRAME_SIZE) {
+ *ppos = 0;
+ return 0;
+ }
+
+ if (*ppos == 0) {
+ read_frame(cam, 0);
+ vicam_decode_color(cam->raw_image,
+ cam->framebuf +
+ 0 * VICAM_MAX_FRAME_SIZE);
+ }
+
+ count = min_t(size_t, count, VICAM_MAX_FRAME_SIZE - *ppos);
+
+ if (copy_to_user(buf, &cam->framebuf[*ppos], count)) {
+ count = -EFAULT;
+ } else {
+ *ppos += count;
+ }
+
+ if (count == VICAM_MAX_FRAME_SIZE) {
+ *ppos = 0;
+ }
+
+ return count;
+}
+
+
+static int
+vicam_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ // TODO: allocate the raw frame buffer if necessary
+ unsigned long page, pos;
+ unsigned long start = vma->vm_start;
+ unsigned long size = vma->vm_end-vma->vm_start;
+ struct vicam_camera *cam = file->private_data;
+
+ if (!cam)
+ return -ENODEV;
+
+ DBG("vicam_mmap: %ld\n", size);
+
+ /* We let mmap allocate as much as it wants because Linux was adding 2048 bytes
+ * to the size the application requested for mmap and it was screwing apps up.
+ if (size > VICAM_FRAMES*VICAM_MAX_FRAME_SIZE)
+ return -EINVAL;
+ */
+
+ pos = (unsigned long)cam->framebuf;
+ while (size > 0) {
+ page = vmalloc_to_pfn((void *)pos);
+ if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
+ return -EAGAIN;
+
+ start += PAGE_SIZE;
+ pos += PAGE_SIZE;
+ if (size > PAGE_SIZE)
+ size -= PAGE_SIZE;
+ else
+ size = 0;
+ }
+
+ return 0;
+}
+
+static const struct v4l2_file_operations vicam_fops = {
+ .owner = THIS_MODULE,
+ .open = vicam_open,
+ .release = vicam_close,
+ .read = vicam_read,
+ .mmap = vicam_mmap,
+ .ioctl = vicam_ioctl,
+};
+
+static struct video_device vicam_template = {
+ .name = "ViCam-based USB Camera",
+ .fops = &vicam_fops,
+ .release = video_device_release_empty,
+};
+
+/* table of devices that work with this driver */
+static struct usb_device_id vicam_table[] = {
+ {USB_DEVICE(USB_VICAM_VENDOR_ID, USB_VICAM_PRODUCT_ID)},
+ {USB_DEVICE(USB_COMPRO_VENDOR_ID, USB_COMPRO_PRODUCT_ID)},
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, vicam_table);
+
+static struct usb_driver vicam_driver = {
+ .name = "vicam",
+ .probe = vicam_probe,
+ .disconnect = vicam_disconnect,
+ .id_table = vicam_table
+};
+
+/**
+ * vicam_probe
+ * @intf: the interface
+ * @id: the device id
+ *
+ * Called by the usb core when a new device is connected that it thinks
+ * this driver might be interested in.
+ */
+static int
+vicam_probe( struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ int bulkEndpoint = 0;
+ const struct usb_host_interface *interface;
+ const struct usb_endpoint_descriptor *endpoint;
+ struct vicam_camera *cam;
+
+ printk(KERN_INFO "ViCam based webcam connected\n");
+
+ interface = intf->cur_altsetting;
+
+ DBG(KERN_DEBUG "Interface %d. has %u. endpoints!\n",
+ interface->desc.bInterfaceNumber, (unsigned) (interface->desc.bNumEndpoints));
+ endpoint = &interface->endpoint[0].desc;
+
+ if (usb_endpoint_is_bulk_in(endpoint)) {
+ /* we found a bulk in endpoint */
+ bulkEndpoint = endpoint->bEndpointAddress;
+ } else {
+ printk(KERN_ERR
+ "No bulk in endpoint was found ?! (this is bad)\n");
+ }
+
+ if ((cam =
+ kzalloc(sizeof (struct vicam_camera), GFP_KERNEL)) == NULL) {
+ printk(KERN_WARNING
+ "could not allocate kernel memory for vicam_camera struct\n");
+ return -ENOMEM;
+ }
+
+
+ cam->shutter_speed = 15;
+
+ mutex_init(&cam->cam_lock);
+
+ memcpy(&cam->vdev, &vicam_template, sizeof(vicam_template));
+ video_set_drvdata(&cam->vdev, cam);
+
+ cam->udev = dev;
+ cam->bulkEndpoint = bulkEndpoint;
+
+ if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) < 0) {
+ kfree(cam);
+ printk(KERN_WARNING "video_register_device failed\n");
+ return -EIO;
+ }
+
+ printk(KERN_INFO "ViCam webcam driver now controlling device %s\n",
+ video_device_node_name(&cam->vdev));
+
+ usb_set_intfdata (intf, cam);
+
+ return 0;
+}
+
+static void
+vicam_disconnect(struct usb_interface *intf)
+{
+ int open_count;
+ struct vicam_camera *cam = usb_get_intfdata (intf);
+ usb_set_intfdata (intf, NULL);
+
+ /* we must unregister the device before taking its
+ * cam_lock. This is because the video open call
+ * holds the same lock as video unregister. if we
+ * unregister inside of the cam_lock and open also
+ * uses the cam_lock, we get deadlock.
+ */
+
+ video_unregister_device(&cam->vdev);
+
+ /* stop the camera from being used */
+
+ mutex_lock(&cam->cam_lock);
+
+ /* mark the camera as gone */
+
+ cam->udev = NULL;
+
+ /* the only thing left to do is synchronize with
+ * our close/release function on who should release
+ * the camera memory. if there are any users using the
+ * camera, it's their job. if there are no users,
+ * it's ours.
+ */
+
+ open_count = cam->open_count;
+
+ mutex_unlock(&cam->cam_lock);
+
+ if (!open_count) {
+ kfree(cam);
+ }
+
+ printk(KERN_DEBUG "ViCam-based WebCam disconnected\n");
+}
+
+/*
+ */
+static int __init
+usb_vicam_init(void)
+{
+ int retval;
+ DBG(KERN_INFO "ViCam-based WebCam driver startup\n");
+ retval = usb_register(&vicam_driver);
+ if (retval)
+ printk(KERN_WARNING "usb_register failed!\n");
+ return retval;
+}
+
+static void __exit
+usb_vicam_exit(void)
+{
+ DBG(KERN_INFO
+ "ViCam-based WebCam driver shutdown\n");
+
+ usb_deregister(&vicam_driver);
+}
+
+module_init(usb_vicam_init);
+module_exit(usb_vicam_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("vicam/firmware.fw");
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff