MXC: mxc_nand: set NFC registers after reset

This patch allows the mxc_nand driver to reset the NAND
flash controller.  NFC registers are (re-)set after
completion of the reset, as a reset will have reverted
the NFC registers to their default values.

Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index b2900d8406d3904316b5da1bec7f9a4e2c1b88b0..ed27d38de27aebf4f5eed2f9f110ce17c1e50c01 100644 (file)
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -542,6 +542,41 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
        }
 }
 
+static void preset(struct mtd_info *mtd)
+{
+       struct nand_chip *nand_chip = mtd->priv;
+       struct mxc_nand_host *host = nand_chip->priv;
+       uint16_t tmp;
+
+       /* disable interrupt, disable spare enable */
+       tmp = readw(host->regs + NFC_CONFIG1);
+       tmp |= NFC_INT_MSK;
+       tmp &= ~NFC_SP_EN;
+       if (nand_chip->ecc.mode == NAND_ECC_HW) {
+               tmp |= NFC_ECC_EN;
+       } else {
+               tmp &= ~NFC_ECC_EN;
+       }
+       writew(tmp, host->regs + NFC_CONFIG1);
+       /* preset operation */
+
+       /* Unlock the internal RAM Buffer */
+       writew(0x2, host->regs + NFC_CONFIG);
+
+       /* Blocks to be unlocked */
+       if (nfc_is_v21()) {
+               writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR);
+               writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR);
+       } else if (nfc_is_v1()) {
+               writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR);
+               writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR);
+       } else
+               BUG();
+
+       /* Unlock Block Command for given address range */
+       writew(0x4, host->regs + NFC_WRPROT);
+}
+
 /* Used by the upper layer to write command to NAND Flash for
  * different operations to be carried out on NAND Flash */
 static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
@@ -559,6 +594,10 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 
        /* Command pre-processing step */
        switch (command) {
+       case NAND_CMD_RESET:
+               send_cmd(host, command, false);
+               preset(mtd);
+               break;
 
        case NAND_CMD_STATUS:
                host->buf_start = 0;
@@ -679,7 +718,6 @@ static int __init mxcnd_probe(struct platform_device *pdev)
        struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
        struct mxc_nand_host *host;
        struct resource *res;
-       uint16_t tmp;
        int err = 0, nr_parts = 0;
        struct nand_ecclayout *oob_smallpage, *oob_largepage;
 
@@ -743,51 +781,17 @@ static int __init mxcnd_probe(struct platform_device *pdev)
                host->spare_len = 64;
                oob_smallpage = &nandv2_hw_eccoob_smallpage;
                oob_largepage = &nandv2_hw_eccoob_largepage;
+               this->ecc.bytes = 9;
        } else if (nfc_is_v1()) {
                host->regs = host->base;
                host->spare0 = host->base + 0x800;
                host->spare_len = 16;
                oob_smallpage = &nandv1_hw_eccoob_smallpage;
                oob_largepage = &nandv1_hw_eccoob_largepage;
-       } else
-               BUG();
-
-       /* disable interrupt and spare enable */
-       tmp = readw(host->regs + NFC_CONFIG1);
-       tmp |= NFC_INT_MSK;
-       tmp &= ~NFC_SP_EN;
-       writew(tmp, host->regs + NFC_CONFIG1);
-
-       init_waitqueue_head(&host->irq_waitq);
-
-       host->irq = platform_get_irq(pdev, 0);
-
-       err = request_irq(host->irq, mxc_nfc_irq, 0, DRIVER_NAME, host);
-       if (err)
-               goto eirq;
-
-       /* Reset NAND */
-       this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-
-       /* preset operation */
-       /* Unlock the internal RAM Buffer */
-       writew(0x2, host->regs + NFC_CONFIG);
-
-       /* Blocks to be unlocked */
-       if (nfc_is_v21()) {
-               writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR);
-               writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR);
-               this->ecc.bytes = 9;
-       } else if (nfc_is_v1()) {
-               writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR);
-               writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR);
                this->ecc.bytes = 3;
        } else
                BUG();
 
-       /* Unlock Block Command for given address range */
-       writew(0x4, host->regs + NFC_WRPROT);
-
        this->ecc.size = 512;
        this->ecc.layout = oob_smallpage;
 
@@ -796,14 +800,8 @@ static int __init mxcnd_probe(struct platform_device *pdev)
                this->ecc.hwctl = mxc_nand_enable_hwecc;
                this->ecc.correct = mxc_nand_correct_data;
                this->ecc.mode = NAND_ECC_HW;
-               tmp = readw(host->regs + NFC_CONFIG1);
-               tmp |= NFC_ECC_EN;
-               writew(tmp, host->regs + NFC_CONFIG1);
        } else {
                this->ecc.mode = NAND_ECC_SOFT;
-               tmp = readw(host->regs + NFC_CONFIG1);
-               tmp &= ~NFC_ECC_EN;
-               writew(tmp, host->regs + NFC_CONFIG1);
        }
 
        /* NAND bus width determines access funtions used by upper layer */
@@ -817,6 +815,14 @@ static int __init mxcnd_probe(struct platform_device *pdev)
                this->options |= NAND_USE_FLASH_BBT;
        }
 
+       init_waitqueue_head(&host->irq_waitq);
+
+       host->irq = platform_get_irq(pdev, 0);
+
+       err = request_irq(host->irq, mxc_nfc_irq, 0, DRIVER_NAME, host);
+       if (err)
+               goto eirq;
+
        /* first scan to find the device and get the page size */
        if (nand_scan_ident(mtd, 1)) {
                err = -ENXIO;