cfg80211/nl80211: fix kernel-doc

Add missing entries to nl80211.h and fix
the kernel-doc notation in cfg80211.h.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index e7b1fc1fe26b020ed19428e83d8d35e7d82fe1db..e4f41bdebc07650435fcb2980a89242519557c3f 100644 (file)
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -277,6 +277,12 @@
  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
  *     NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
  *
+ * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
+ *     (for the BSSID) and %NL80211_ATTR_PMKID.
+ * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
+ *     (for the BSSID) and %NL80211_ATTR_PMKID.
+ * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
+ *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
  *     has been changed and provides details of the request information
  *     that caused the change such as who initiated the regulatory request
@@ -456,6 +462,10 @@
  *     the frame.
  * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
  *     backward compatibility.
+ *
+ * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE
+ * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE
+ *
  * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
  *     is used to configure connection quality monitoring notification trigger
  *     levels.
@@ -771,6 +781,13 @@ enum nl80211_commands {
  *     section 7.3.2.25.1, e.g. 0x000FAC04)
  * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
  *     CCMP keys, each six bytes in little endian
+ * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
+ * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
+ *     default management key
+ * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or
+ *     other commands, indicates which pairwise cipher suites are used
+ * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or
+ *     other commands, indicates which group cipher suite is used
  *
  * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
  * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
@@ -1006,6 +1023,8 @@ enum nl80211_commands {
  * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
  *     acknowledged by the recipient.
  *
+ * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
+ *
  * @NL80211_ATTR_CQM: connection quality monitor configuration in a
  *     nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
  *
@@ -1063,7 +1082,7 @@ enum nl80211_commands {
  *     flag isn't set, the frame will be rejected. This is also used as an
  *     nl80211 capability flag.
  *
- * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16)
+ * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16)
  *
  * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
  *     attributes, specifying what a key should be set as default as.
@@ -1087,10 +1106,10 @@ enum nl80211_commands {
  *     indicate which WoW triggers should be enabled. This is also
  *     used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
  *     triggers.
-
+ *
  * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
  *     cycles, in msecs.
-
+ *
  * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
  *     sets of attributes to match during scheduled scans.  Only BSSs
  *     that match any of the sets will be reported.  These are
@@ -1117,7 +1136,7 @@ enum nl80211_commands {
  *     are managed in software: interfaces of these types aren't subject to
  *     any restrictions in their number or combinations.
  *
- * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
+ * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
  *     necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
  *
  * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
@@ -1184,7 +1203,6 @@ enum nl80211_commands {
  * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
  *     &enum nl80211_feature_flags and is advertised in wiphy information.
  * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
- *
  *     requests while operating in AP-mode.
  *     This attribute holds a bitmap of the supported protocols for
  *     offloading (see &enum nl80211_probe_resp_offload_support_attr).
@@ -2507,6 +2525,11 @@ enum nl80211_band {
        NL80211_BAND_5GHZ,
 };
 
+/**
+ * enum nl80211_ps_state - powersave state
+ * @NL80211_PS_DISABLED: powersave is disabled
+ * @NL80211_PS_ENABLED: powersave is enabled
+ */
 enum nl80211_ps_state {
        NL80211_PS_DISABLED,
        NL80211_PS_ENABLED,

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 778e533a9734f408776e983335252e36044080b9..76d54725ea3190d7e0ed85b1c974998586affa68 100644 (file)
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -627,10 +627,10 @@ struct sta_bss_parameters {
  * @llid: mesh local link id
  * @plid: mesh peer link id
  * @plink_state: mesh peer link state
- * @signal: the signal strength, type depends on the wiphy's signal_type
-       NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
- * @signal_avg: avg signal strength, type depends on the wiphy's signal_type
-       NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
+ * @signal: The signal strength, type depends on the wiphy's signal_type.
+ *     For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
+ * @signal_avg: Average signal strength, type depends on the wiphy's signal_type.
+ *     For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
  * @txrate: current unicast bitrate from this station
  * @rxrate: current unicast bitrate to this station
  * @rx_packets: packets received from this station