intel-gtt: consolidate i830 setup

Slighlty reordered sequence was necessary. Also don't set
agp_bridge->gatt_bus_addr anymore. Only used by generic agp helper
functions, hence unnecessary for the intel fake agp driver.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 73082ef09dc1220ea7f5e58fde2e5d9d41102acc..fd977aa4a17dc0828b12692cff1bd78622d68a6d 100644 (file)
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -86,6 +86,8 @@ struct intel_gtt_driver {
        unsigned int is_g33 : 1;
        unsigned int is_pineview : 1;
        unsigned int is_ironlake : 1;
+       /* Chipset specific GTT setup */
+       int (*setup)(void);
 };
 
 static struct _intel_private {
@@ -95,6 +97,7 @@ static struct _intel_private {
        struct pci_dev *bridge_dev;
        u8 __iomem *registers;
        phys_addr_t gtt_bus_addr;
+       phys_addr_t gma_bus_addr;
        u32 __iomem *gtt;               /* I915G */
        int num_dcache_entries;
        union {
@@ -893,38 +896,60 @@ static void intel_i830_chipset_flush(struct agp_bridge_data *bridge)
                printk(KERN_ERR "Timed out waiting for cache flush.\n");
 }
 
-/* The intel i830 automatically initializes the agp aperture during POST.
- * Use the memory already set aside for in the GTT.
- */
-static int intel_i830_create_gatt_table(struct agp_bridge_data *bridge)
+static void intel_enable_gtt(void)
 {
-       int page_order, ret;
-       struct aper_size_info_fixed *size;
-       int num_entries;
-       u32 temp;
+       u32 ptetbl_addr, gma_addr;
+       u16 gmch_ctrl;
 
-       size = agp_bridge->current_size;
-       page_order = size->page_order;
-       num_entries = size->num_entries;
-       agp_bridge->gatt_table_real = NULL;
+       ptetbl_addr = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000;
 
-       pci_read_config_dword(intel_private.pcidev, I810_MMADDR, &temp);
-       temp &= 0xfff80000;
+       pci_read_config_dword(intel_private.pcidev, I810_GMADDR, &gma_addr);
+       intel_private.gma_bus_addr = (gma_addr & PCI_BASE_ADDRESS_MEM_MASK);
 
-       intel_private.registers = ioremap(temp, KB(64));
+       pci_read_config_word(intel_private.bridge_dev, I830_GMCH_CTRL, &gmch_ctrl);
+       gmch_ctrl |= I830_GMCH_ENABLED;
+       pci_write_config_word(intel_private.bridge_dev, I830_GMCH_CTRL, gmch_ctrl);
+
+       writel(ptetbl_addr|I810_PGETBL_ENABLED, intel_private.registers+I810_PGETBL_CTL);
+       readl(intel_private.registers+I810_PGETBL_CTL); /* PCI Posting. */
+}
+
+static int i830_setup(void)
+{
+       u32 reg_addr;
+
+       pci_read_config_dword(intel_private.pcidev, I810_MMADDR, &reg_addr);
+       reg_addr &= 0xfff80000;
+
+       intel_private.registers = ioremap(reg_addr, KB(64));
        if (!intel_private.registers)
                return -ENOMEM;
 
-       intel_private.gtt_bus_addr = temp + I810_PTE_BASE;
-       temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000;
+       intel_private.gtt_bus_addr = reg_addr + I810_PTE_BASE;
+
+       intel_i830_setup_flush();
+
+       return 0;
+}
+
+/* The intel i830 automatically initializes the agp aperture during POST.
+ * Use the memory already set aside for in the GTT.
+ */
+static int intel_i830_create_gatt_table(struct agp_bridge_data *bridge)
+{
+       int ret;
+
+       ret = intel_private.driver->setup();
+       if (ret != 0)
+               return ret;
 
        ret = intel_gtt_init();
        if (ret != 0)
                return ret;
 
+       agp_bridge->gatt_table_real = NULL;
        agp_bridge->gatt_table = NULL;
-
-       agp_bridge->gatt_bus_addr = temp;
+       agp_bridge->gatt_bus_addr = 0;
 
        return 0;
 }
@@ -939,25 +964,15 @@ static int intel_fake_agp_free_gatt_table(struct agp_bridge_data *bridge)
 
 static int intel_i830_configure(void)
 {
-       struct aper_size_info_fixed *current_size;
-       u32 temp;
-       u16 gmch_ctrl;
        int i;
 
-       current_size = A_SIZE_FIX(agp_bridge->current_size);
-
-       pci_read_config_dword(intel_private.pcidev, I810_GMADDR, &temp);
-       agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
-
-       pci_read_config_word(intel_private.bridge_dev, I830_GMCH_CTRL, &gmch_ctrl);
-       gmch_ctrl |= I830_GMCH_ENABLED;
-       pci_write_config_word(intel_private.bridge_dev, I830_GMCH_CTRL, gmch_ctrl);
+       intel_enable_gtt();
 
-       writel(agp_bridge->gatt_bus_addr|I810_PGETBL_ENABLED, intel_private.registers+I810_PGETBL_CTL);
-       readl(intel_private.registers+I810_PGETBL_CTL); /* PCI Posting. */
+       agp_bridge->gart_bus_addr = intel_private.gma_bus_addr;
 
        if (agp_bridge->driver->needs_scratch_page) {
-               for (i = intel_private.base.gtt_stolen_entries; i < current_size->num_entries; i++) {
+               for (i = intel_private.base.gtt_stolen_entries;
+                               i < intel_private.base.gtt_total_entries; i++) {
                        writel(agp_bridge->scratch_page, intel_private.gtt+i);
                }
                readl(intel_private.gtt+i-1);   /* PCI Posting. */
@@ -965,7 +980,6 @@ static int intel_i830_configure(void)
 
        global_cache_flush();
 
-       intel_i830_setup_flush();
        return 0;
 }
 
@@ -1584,6 +1598,7 @@ static const struct agp_bridge_driver intel_g33_driver = {
 
 static const struct intel_gtt_driver i8xx_gtt_driver = {
        .gen = 2,
+       .setup = i830_setup,
 };
 static const struct intel_gtt_driver i915_gtt_driver = {
        .gen = 3,