--- /dev/null
+/*
+ * hcd.c - DesignWare HS OTG Controller host-mode routines
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * This file contains the core HCD code, and implements the Linux hc_driver
+ * API
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+/**
+ * dwc2_dump_channel_info() - Prints the state of a host channel
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @chan: Pointer to the channel to dump
+ *
+ * Must be called with interrupt disabled and spinlock held
+ *
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan)
+{
+#ifdef VERBOSE_DEBUG
+ int num_channels = hsotg->core_params->host_channels;
+ struct dwc2_qh *qh;
+ u32 hcchar;
+ u32 hcsplt;
+ u32 hctsiz;
+ u32 hc_dma;
+ int i;
+
+ if (chan == NULL)
+ return;
+
+ hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num));
+ hcsplt = readl(hsotg->regs + HCSPLT(chan->hc_num));
+ hctsiz = readl(hsotg->regs + HCTSIZ(chan->hc_num));
+ hc_dma = readl(hsotg->regs + HCDMA(chan->hc_num));
+
+ dev_dbg(hsotg->dev, " Assigned to channel %p:\n", chan);
+ dev_dbg(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n",
+ hcchar, hcsplt);
+ dev_dbg(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n",
+ hctsiz, hc_dma);
+ dev_dbg(hsotg->dev, " dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
+ chan->dev_addr, chan->ep_num, chan->ep_is_in);
+ dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type);
+ dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet);
+ dev_dbg(hsotg->dev, " data_pid_start: %d\n", chan->data_pid_start);
+ dev_dbg(hsotg->dev, " xfer_started: %d\n", chan->xfer_started);
+ dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status);
+ dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf);
+ dev_dbg(hsotg->dev, " xfer_dma: %08lx\n",
+ (unsigned long)chan->xfer_dma);
+ dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len);
+ dev_dbg(hsotg->dev, " qh: %p\n", chan->qh);
+ dev_dbg(hsotg->dev, " NP inactive sched:\n");
+ list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive,
+ qh_list_entry)
+ dev_dbg(hsotg->dev, " %p\n", qh);
+ dev_dbg(hsotg->dev, " NP active sched:\n");
+ list_for_each_entry(qh, &hsotg->non_periodic_sched_active,
+ qh_list_entry)
+ dev_dbg(hsotg->dev, " %p\n", qh);
+ dev_dbg(hsotg->dev, " Channels:\n");
+ for (i = 0; i < num_channels; i++) {
+ struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i];
+
+ dev_dbg(hsotg->dev, " %2d: %p\n", i, chan);
+ }
+#endif /* VERBOSE_DEBUG */
+}
+
+/*
+ * Processes all the URBs in a single list of QHs. Completes them with
+ * -ETIMEDOUT and frees the QTD.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg *hsotg,
+ struct list_head *qh_list)
+{
+ struct dwc2_qh *qh, *qh_tmp;
+ struct dwc2_qtd *qtd, *qtd_tmp;
+
+ list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) {
+ list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list,
+ qtd_list_entry) {
+ if (qtd->urb != NULL) {
+ dwc2_host_complete(hsotg, qtd->urb->priv,
+ qtd->urb, -ETIMEDOUT);
+ dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+ }
+ }
+ }
+}
+
+static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg,
+ struct list_head *qh_list)
+{
+ struct dwc2_qtd *qtd, *qtd_tmp;
+ struct dwc2_qh *qh, *qh_tmp;
+ unsigned long flags;
+
+ if (!qh_list->next)
+ /* The list hasn't been initialized yet */
+ return;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ /* Ensure there are no QTDs or URBs left */
+ dwc2_kill_urbs_in_qh_list(hsotg, qh_list);
+
+ list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) {
+ dwc2_hcd_qh_unlink(hsotg, qh);
+
+ /* Free each QTD in the QH's QTD list */
+ list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list,
+ qtd_list_entry)
+ dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ dwc2_hcd_qh_free(hsotg, qh);
+ spin_lock_irqsave(&hsotg->lock, flags);
+ }
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+/*
+ * Responds with an error status of -ETIMEDOUT to all URBs in the non-periodic
+ * and periodic schedules. The QTD associated with each URB is removed from
+ * the schedule and freed. This function may be called when a disconnect is
+ * detected or when the HCD is being stopped.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg)
+{
+ dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive);
+ dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active);
+ dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive);
+ dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready);
+ dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_assigned);
+ dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_queued);
+}
+
+/**
+ * dwc2_hcd_start() - Starts the HCD when switching to Host mode
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ */
+void dwc2_hcd_start(struct dwc2_hsotg *hsotg)
+{
+ u32 hprt0;
+
+ if (hsotg->op_state == OTG_STATE_B_HOST) {
+ /*
+ * Reset the port. During a HNP mode switch the reset
+ * needs to occur within 1ms and have a duration of at
+ * least 50ms.
+ */
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 |= HPRT0_RST;
+ writel(hprt0, hsotg->regs + HPRT0);
+ }
+
+ queue_delayed_work(hsotg->wq_otg, &hsotg->start_work,
+ msecs_to_jiffies(50));
+}
+
+/* Must be called with interrupt disabled and spinlock held */
+static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg)
+{
+ int num_channels = hsotg->core_params->host_channels;
+ struct dwc2_host_chan *channel;
+ u32 hcchar;
+ int i;
+
+ if (hsotg->core_params->dma_enable <= 0) {
+ /* Flush out any channel requests in slave mode */
+ for (i = 0; i < num_channels; i++) {
+ channel = hsotg->hc_ptr_array[i];
+ if (!list_empty(&channel->hc_list_entry))
+ continue;
+ hcchar = readl(hsotg->regs + HCCHAR(i));
+ if (hcchar & HCCHAR_CHENA) {
+ hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR);
+ hcchar |= HCCHAR_CHDIS;
+ writel(hcchar, hsotg->regs + HCCHAR(i));
+ }
+ }
+ }
+
+ for (i = 0; i < num_channels; i++) {
+ channel = hsotg->hc_ptr_array[i];
+ if (!list_empty(&channel->hc_list_entry))
+ continue;
+ hcchar = readl(hsotg->regs + HCCHAR(i));
+ if (hcchar & HCCHAR_CHENA) {
+ /* Halt the channel */
+ hcchar |= HCCHAR_CHDIS;
+ writel(hcchar, hsotg->regs + HCCHAR(i));
+ }
+
+ dwc2_hc_cleanup(hsotg, channel);
+ list_add_tail(&channel->hc_list_entry, &hsotg->free_hc_list);
+ /*
+ * Added for Descriptor DMA to prevent channel double cleanup in
+ * release_channel_ddma(), which is called from ep_disable when
+ * device disconnects
+ */
+ channel->qh = NULL;
+ }
+}
+
+/**
+ * dwc2_hcd_disconnect() - Handles disconnect of the HCD
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg)
+{
+ u32 intr;
+
+ /* Set status flags for the hub driver */
+ hsotg->flags.b.port_connect_status_change = 1;
+ hsotg->flags.b.port_connect_status = 0;
+
+ /*
+ * Shutdown any transfers in process by clearing the Tx FIFO Empty
+ * interrupt mask and status bits and disabling subsequent host
+ * channel interrupts.
+ */
+ intr = readl(hsotg->regs + GINTMSK);
+ intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT);
+ writel(intr, hsotg->regs + GINTMSK);
+ intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT;
+ writel(intr, hsotg->regs + GINTSTS);
+
+ /*
+ * Turn off the vbus power only if the core has transitioned to device
+ * mode. If still in host mode, need to keep power on to detect a
+ * reconnection.
+ */
+ if (dwc2_is_device_mode(hsotg)) {
+ if (hsotg->op_state != OTG_STATE_A_SUSPEND) {
+ dev_dbg(hsotg->dev, "Disconnect: PortPower off\n");
+ writel(0, hsotg->regs + HPRT0);
+ }
+
+ dwc2_disable_host_interrupts(hsotg);
+ }
+
+ /* Respond with an error status to all URBs in the schedule */
+ dwc2_kill_all_urbs(hsotg);
+
+ if (dwc2_is_host_mode(hsotg))
+ /* Clean up any host channels that were in use */
+ dwc2_hcd_cleanup_channels(hsotg);
+
+ dwc2_host_disconnect(hsotg);
+}
+
+/**
+ * dwc2_hcd_rem_wakeup() - Handles Remote Wakeup
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ */
+static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg)
+{
+ if (hsotg->lx_state == DWC2_L2)
+ hsotg->flags.b.port_suspend_change = 1;
+ else
+ hsotg->flags.b.port_l1_change = 1;
+}
+
+/**
+ * dwc2_hcd_stop() - Halts the DWC_otg host mode operations in a clean manner
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_hcd_stop(struct dwc2_hsotg *hsotg)
+{
+ dev_dbg(hsotg->dev, "DWC OTG HCD STOP\n");
+
+ /*
+ * The root hub should be disconnected before this function is called.
+ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
+ * and the QH lists (via ..._hcd_endpoint_disable).
+ */
+
+ /* Turn off all host-specific interrupts */
+ dwc2_disable_host_interrupts(hsotg);
+
+ /* Turn off the vbus power */
+ dev_dbg(hsotg->dev, "PortPower off\n");
+ writel(0, hsotg->regs + HPRT0);
+}
+
+static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg,
+ struct dwc2_hcd_urb *urb, void **ep_handle,
+ gfp_t mem_flags)
+{
+ struct dwc2_qtd *qtd;
+ unsigned long flags;
+ u32 intr_mask;
+ int retval;
+
+ if (!hsotg->flags.b.port_connect_status) {
+ /* No longer connected */
+ dev_err(hsotg->dev, "Not connected\n");
+ return -ENODEV;
+ }
+
+ qtd = kzalloc(sizeof(*qtd), mem_flags);
+ if (!qtd)
+ return -ENOMEM;
+
+ dwc2_hcd_qtd_init(qtd, urb);
+ retval = dwc2_hcd_qtd_add(hsotg, qtd, (struct dwc2_qh **)ep_handle,
+ mem_flags);
+ if (retval < 0) {
+ dev_err(hsotg->dev,
+ "DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n",
+ retval);
+ kfree(qtd);
+ return retval;
+ }
+
+ intr_mask = readl(hsotg->regs + GINTMSK);
+ if (!(intr_mask & GINTSTS_SOF) && retval == 0) {
+ enum dwc2_transaction_type tr_type;
+
+ if (qtd->qh->ep_type == USB_ENDPOINT_XFER_BULK &&
+ !(qtd->urb->flags & URB_GIVEBACK_ASAP))
+ /*
+ * Do not schedule SG transactions until qtd has
+ * URB_GIVEBACK_ASAP set
+ */
+ return 0;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ tr_type = dwc2_hcd_select_transactions(hsotg);
+ if (tr_type != DWC2_TRANSACTION_NONE)
+ dwc2_hcd_queue_transactions(hsotg, tr_type);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ }
+
+ return retval;
+}
+
+/* Must be called with interrupt disabled and spinlock held */
+static int dwc2_hcd_urb_dequeue(struct dwc2_hsotg *hsotg,
+ struct dwc2_hcd_urb *urb)
+{
+ struct dwc2_qh *qh;
+ struct dwc2_qtd *urb_qtd;
+
+ urb_qtd = urb->qtd;
+ if (!urb_qtd) {
+ dev_dbg(hsotg->dev, "## Urb QTD is NULL ##\n");
+ return -EINVAL;
+ }
+
+ qh = urb_qtd->qh;
+ if (!qh) {
+ dev_dbg(hsotg->dev, "## Urb QTD QH is NULL ##\n");
+ return -EINVAL;
+ }
+
+ if (urb_qtd->in_process && qh->channel) {
+ dwc2_dump_channel_info(hsotg, qh->channel);
+
+ /* The QTD is in process (it has been assigned to a channel) */
+ if (hsotg->flags.b.port_connect_status)
+ /*
+ * If still connected (i.e. in host mode), halt the
+ * channel so it can be used for other transfers. If
+ * no longer connected, the host registers can't be
+ * written to halt the channel since the core is in
+ * device mode.
+ */
+ dwc2_hc_halt(hsotg, qh->channel,
+ DWC2_HC_XFER_URB_DEQUEUE);
+ }
+
+ /*
+ * Free the QTD and clean up the associated QH. Leave the QH in the
+ * schedule if it has any remaining QTDs.
+ */
+ if (hsotg->core_params->dma_desc_enable <= 0) {
+ u8 in_process = urb_qtd->in_process;
+
+ dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh);
+ if (in_process) {
+ dwc2_hcd_qh_deactivate(hsotg, qh, 0);
+ qh->channel = NULL;
+ } else if (list_empty(&qh->qtd_list)) {
+ dwc2_hcd_qh_unlink(hsotg, qh);
+ }
+ } else {
+ dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh);
+ }
+
+ return 0;
+}
+
+/* Must NOT be called with interrupt disabled or spinlock held */
+static int dwc2_hcd_endpoint_disable(struct dwc2_hsotg *hsotg,
+ struct usb_host_endpoint *ep, int retry)
+{
+ struct dwc2_qtd *qtd, *qtd_tmp;
+ struct dwc2_qh *qh;
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ qh = ep->hcpriv;
+ if (!qh) {
+ rc = -EINVAL;
+ goto err;
+ }
+
+ while (!list_empty(&qh->qtd_list) && retry--) {
+ if (retry == 0) {
+ dev_err(hsotg->dev,
+ "## timeout in dwc2_hcd_endpoint_disable() ##\n");
+ rc = -EBUSY;
+ goto err;
+ }
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ usleep_range(20000, 40000);
+ spin_lock_irqsave(&hsotg->lock, flags);
+ qh = ep->hcpriv;
+ if (!qh) {
+ rc = -EINVAL;
+ goto err;
+ }
+ }
+
+ dwc2_hcd_qh_unlink(hsotg, qh);
+
+ /* Free each QTD in the QH's QTD list */
+ list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry)
+ dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+
+ ep->hcpriv = NULL;
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ dwc2_hcd_qh_free(hsotg, qh);
+
+ return 0;
+
+err:
+ ep->hcpriv = NULL;
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ return rc;
+}
+
+/* Must be called with interrupt disabled and spinlock held */
+static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg,
+ struct usb_host_endpoint *ep)
+{
+ struct dwc2_qh *qh = ep->hcpriv;
+
+ if (!qh)
+ return -EINVAL;
+
+ qh->data_toggle = DWC2_HC_PID_DATA0;
+
+ return 0;
+}
+
+/*
+ * Initializes dynamic portions of the DWC_otg HCD state
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_host_chan *chan, *chan_tmp;
+ int num_channels;
+ int i;
+
+ hsotg->flags.d32 = 0;
+
+ hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active;
+ hsotg->non_periodic_channels = 0;
+ hsotg->periodic_channels = 0;
+
+ /*
+ * Put all channels in the free channel list and clean up channel
+ * states
+ */
+ list_for_each_entry_safe(chan, chan_tmp, &hsotg->free_hc_list,
+ hc_list_entry)
+ list_del_init(&chan->hc_list_entry);
+
+ num_channels = hsotg->core_params->host_channels;
+ for (i = 0; i < num_channels; i++) {
+ chan = hsotg->hc_ptr_array[i];
+ list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list);
+ dwc2_hc_cleanup(hsotg, chan);
+ }
+
+ /* Initialize the DWC core for host mode operation */
+ dwc2_core_host_init(hsotg);
+}
+
+static void dwc2_hc_init_split(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan,
+ struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb)
+{
+ int hub_addr, hub_port;
+
+ chan->do_split = 1;
+ chan->xact_pos = qtd->isoc_split_pos;
+ chan->complete_split = qtd->complete_split;
+ dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port);
+ chan->hub_addr = (u8)hub_addr;
+ chan->hub_port = (u8)hub_port;
+}
+
+static void *dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan,
+ struct dwc2_qtd *qtd, void *bufptr)
+{
+ struct dwc2_hcd_urb *urb = qtd->urb;
+ struct dwc2_hcd_iso_packet_desc *frame_desc;
+
+ switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ chan->ep_type = USB_ENDPOINT_XFER_CONTROL;
+
+ switch (qtd->control_phase) {
+ case DWC2_CONTROL_SETUP:
+ dev_vdbg(hsotg->dev, " Control setup transaction\n");
+ chan->do_ping = 0;
+ chan->ep_is_in = 0;
+ chan->data_pid_start = DWC2_HC_PID_SETUP;
+ if (hsotg->core_params->dma_enable > 0)
+ chan->xfer_dma = urb->setup_dma;
+ else
+ chan->xfer_buf = urb->setup_packet;
+ chan->xfer_len = 8;
+ bufptr = NULL;
+ break;
+
+ case DWC2_CONTROL_DATA:
+ dev_vdbg(hsotg->dev, " Control data transaction\n");
+ chan->data_pid_start = qtd->data_toggle;
+ break;
+
+ case DWC2_CONTROL_STATUS:
+ /*
+ * Direction is opposite of data direction or IN if no
+ * data
+ */
+ dev_vdbg(hsotg->dev, " Control status transaction\n");
+ if (urb->length == 0)
+ chan->ep_is_in = 1;
+ else
+ chan->ep_is_in =
+ dwc2_hcd_is_pipe_out(&urb->pipe_info);
+ if (chan->ep_is_in)
+ chan->do_ping = 0;
+ chan->data_pid_start = DWC2_HC_PID_DATA1;
+ chan->xfer_len = 0;
+ if (hsotg->core_params->dma_enable > 0)
+ chan->xfer_dma = hsotg->status_buf_dma;
+ else
+ chan->xfer_buf = hsotg->status_buf;
+ bufptr = NULL;
+ break;
+ }
+ break;
+
+ case USB_ENDPOINT_XFER_BULK:
+ chan->ep_type = USB_ENDPOINT_XFER_BULK;
+ break;
+
+ case USB_ENDPOINT_XFER_INT:
+ chan->ep_type = USB_ENDPOINT_XFER_INT;
+ break;
+
+ case USB_ENDPOINT_XFER_ISOC:
+ chan->ep_type = USB_ENDPOINT_XFER_ISOC;
+ if (hsotg->core_params->dma_desc_enable > 0)
+ break;
+
+ frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
+ frame_desc->status = 0;
+
+ if (hsotg->core_params->dma_enable > 0) {
+ chan->xfer_dma = urb->dma;
+ chan->xfer_dma += frame_desc->offset +
+ qtd->isoc_split_offset;
+ } else {
+ chan->xfer_buf = urb->buf;
+ chan->xfer_buf += frame_desc->offset +
+ qtd->isoc_split_offset;
+ }
+
+ chan->xfer_len = frame_desc->length - qtd->isoc_split_offset;
+
+ /* For non-dword aligned buffers */
+ if (hsotg->core_params->dma_enable > 0 &&
+ (chan->xfer_dma & 0x3))
+ bufptr = (u8 *)urb->buf + frame_desc->offset +
+ qtd->isoc_split_offset;
+ else
+ bufptr = NULL;
+
+ if (chan->xact_pos == DWC2_HCSPLT_XACTPOS_ALL) {
+ if (chan->xfer_len <= 188)
+ chan->xact_pos = DWC2_HCSPLT_XACTPOS_ALL;
+ else
+ chan->xact_pos = DWC2_HCSPLT_XACTPOS_BEGIN;
+ }
+ break;
+ }
+
+ return bufptr;
+}
+
+static int dwc2_hc_setup_align_buf(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+ struct dwc2_host_chan *chan, void *bufptr)
+{
+ u32 buf_size;
+
+ if (chan->ep_type != USB_ENDPOINT_XFER_ISOC)
+ buf_size = hsotg->core_params->max_transfer_size;
+ else
+ buf_size = 4096;
+
+ if (!qh->dw_align_buf) {
+ qh->dw_align_buf = dma_alloc_coherent(hsotg->dev, buf_size,
+ &qh->dw_align_buf_dma,
+ GFP_ATOMIC);
+ if (!qh->dw_align_buf)
+ return -ENOMEM;
+ }
+
+ if (!chan->ep_is_in && chan->xfer_len) {
+ dma_sync_single_for_cpu(hsotg->dev, chan->xfer_dma, buf_size,
+ DMA_TO_DEVICE);
+ memcpy(qh->dw_align_buf, bufptr, chan->xfer_len);
+ dma_sync_single_for_device(hsotg->dev, chan->xfer_dma, buf_size,
+ DMA_TO_DEVICE);
+ }
+
+ chan->align_buf = qh->dw_align_buf_dma;
+ return 0;
+}
+
+/**
+ * dwc2_assign_and_init_hc() - Assigns transactions from a QTD to a free host
+ * channel and initializes the host channel to perform the transactions. The
+ * host channel is removed from the free list.
+ *
+ * @hsotg: The HCD state structure
+ * @qh: Transactions from the first QTD for this QH are selected and assigned
+ * to a free host channel
+ */
+static void dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh)
+{
+ struct dwc2_host_chan *chan;
+ struct dwc2_hcd_urb *urb;
+ struct dwc2_qtd *qtd;
+ void *bufptr = NULL;
+
+ dev_vdbg(hsotg->dev, "%s(%p,%p)\n", __func__, hsotg, qh);
+
+ if (list_empty(&qh->qtd_list)) {
+ dev_dbg(hsotg->dev, "No QTDs in QH list\n");
+ return;
+ }
+
+ if (list_empty(&hsotg->free_hc_list)) {
+ dev_dbg(hsotg->dev, "No free channel to assign\n");
+ return;
+ }
+
+ chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan,
+ hc_list_entry);
+
+ /* Remove the host channel from the free list */
+ list_del_init(&chan->hc_list_entry);
+
+ qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry);
+ urb = qtd->urb;
+ qh->channel = chan;
+ qtd->in_process = 1;
+
+ /*
+ * Use usb_pipedevice to determine device address. This address is
+ * 0 before the SET_ADDRESS command and the correct address afterward.
+ */
+ chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info);
+ chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info);
+ chan->speed = qh->dev_speed;
+ chan->max_packet = dwc2_max_packet(qh->maxp);
+
+ chan->xfer_started = 0;
+ chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS;
+ chan->error_state = (qtd->error_count > 0);
+ chan->halt_on_queue = 0;
+ chan->halt_pending = 0;
+ chan->requests = 0;
+
+ /*
+ * The following values may be modified in the transfer type section
+ * below. The xfer_len value may be reduced when the transfer is
+ * started to accommodate the max widths of the XferSize and PktCnt
+ * fields in the HCTSIZn register.
+ */
+
+ chan->ep_is_in = (dwc2_hcd_is_pipe_in(&urb->pipe_info) != 0);
+ if (chan->ep_is_in)
+ chan->do_ping = 0;
+ else
+ chan->do_ping = qh->ping_state;
+
+ chan->data_pid_start = qh->data_toggle;
+ chan->multi_count = 1;
+
+ if (hsotg->core_params->dma_enable > 0) {
+ chan->xfer_dma = urb->dma + urb->actual_length;
+
+ /* For non-dword aligned case */
+ if (hsotg->core_params->dma_desc_enable <= 0 &&
+ (chan->xfer_dma & 0x3))
+ bufptr = (u8 *)urb->buf + urb->actual_length;
+ } else {
+ chan->xfer_buf = (u8 *)urb->buf + urb->actual_length;
+ }
+
+ chan->xfer_len = urb->length - urb->actual_length;
+ chan->xfer_count = 0;
+
+ /* Set the split attributes if required */
+ if (qh->do_split)
+ dwc2_hc_init_split(hsotg, chan, qtd, urb);
+ else
+ chan->do_split = 0;
+
+ /* Set the transfer attributes */
+ bufptr = dwc2_hc_init_xfer(hsotg, chan, qtd, bufptr);
+
+ /* Non DWORD-aligned buffer case */
+ if (bufptr) {
+ dev_vdbg(hsotg->dev, "Non-aligned buffer\n");
+ if (dwc2_hc_setup_align_buf(hsotg, qh, chan, bufptr)) {
+ dev_err(hsotg->dev,
+ "%s: Failed to allocate memory to handle non-dword aligned buffer\n",
+ __func__);
+ /* Add channel back to free list */
+ chan->align_buf = 0;
+ chan->multi_count = 0;
+ list_add_tail(&chan->hc_list_entry,
+ &hsotg->free_hc_list);
+ qtd->in_process = 0;
+ qh->channel = NULL;
+ return;
+ }
+ } else {
+ chan->align_buf = 0;
+ }
+
+ if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+ /*
+ * This value may be modified when the transfer is started
+ * to reflect the actual transfer length
+ */
+ chan->multi_count = dwc2_hb_mult(qh->maxp);
+
+ if (hsotg->core_params->dma_desc_enable > 0)
+ chan->desc_list_addr = qh->desc_list_dma;
+
+ dwc2_hc_init(hsotg, chan);
+ chan->qh = qh;
+}
+
+/**
+ * dwc2_hcd_select_transactions() - Selects transactions from the HCD transfer
+ * schedule and assigns them to available host channels. Called from the HCD
+ * interrupt handler functions.
+ *
+ * @hsotg: The HCD state structure
+ *
+ * Return: The types of new transactions that were assigned to host channels
+ */
+enum dwc2_transaction_type dwc2_hcd_select_transactions(
+ struct dwc2_hsotg *hsotg)
+{
+ enum dwc2_transaction_type ret_val = DWC2_TRANSACTION_NONE;
+ struct list_head *qh_ptr;
+ struct dwc2_qh *qh;
+ int num_channels;
+
+#ifdef DWC2_DEBUG_SOF
+ dev_vdbg(hsotg->dev, " Select Transactions\n");
+#endif
+
+ /* Process entries in the periodic ready list */
+ qh_ptr = hsotg->periodic_sched_ready.next;
+ while (qh_ptr != &hsotg->periodic_sched_ready) {
+ if (list_empty(&hsotg->free_hc_list))
+ break;
+ qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
+ dwc2_assign_and_init_hc(hsotg, qh);
+
+ /*
+ * Move the QH from the periodic ready schedule to the
+ * periodic assigned schedule
+ */
+ qh_ptr = qh_ptr->next;
+ list_move(&qh->qh_list_entry, &hsotg->periodic_sched_assigned);
+ ret_val = DWC2_TRANSACTION_PERIODIC;
+ }
+
+ /*
+ * Process entries in the inactive portion of the non-periodic
+ * schedule. Some free host channels may not be used if they are
+ * reserved for periodic transfers.
+ */
+ num_channels = hsotg->core_params->host_channels;
+ qh_ptr = hsotg->non_periodic_sched_inactive.next;
+ while (qh_ptr != &hsotg->non_periodic_sched_inactive) {
+ if (hsotg->non_periodic_channels >= num_channels -
+ hsotg->periodic_channels)
+ break;
+ if (list_empty(&hsotg->free_hc_list))
+ break;
+ qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
+ dwc2_assign_and_init_hc(hsotg, qh);
+
+ /*
+ * Move the QH from the non-periodic inactive schedule to the
+ * non-periodic active schedule
+ */
+ qh_ptr = qh_ptr->next;
+ list_move(&qh->qh_list_entry,
+ &hsotg->non_periodic_sched_active);
+
+ if (ret_val == DWC2_TRANSACTION_NONE)
+ ret_val = DWC2_TRANSACTION_NON_PERIODIC;
+ else
+ ret_val = DWC2_TRANSACTION_ALL;
+
+ hsotg->non_periodic_channels++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * dwc2_queue_transaction() - Attempts to queue a single transaction request for
+ * a host channel associated with either a periodic or non-periodic transfer
+ *
+ * @hsotg: The HCD state structure
+ * @chan: Host channel descriptor associated with either a periodic or
+ * non-periodic transfer
+ * @fifo_dwords_avail: Number of DWORDs available in the periodic Tx FIFO
+ * for periodic transfers or the non-periodic Tx FIFO
+ * for non-periodic transfers
+ *
+ * Return: 1 if a request is queued and more requests may be needed to
+ * complete the transfer, 0 if no more requests are required for this
+ * transfer, -1 if there is insufficient space in the Tx FIFO
+ *
+ * This function assumes that there is space available in the appropriate
+ * request queue. For an OUT transfer or SETUP transaction in Slave mode,
+ * it checks whether space is available in the appropriate Tx FIFO.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan,
+ u16 fifo_dwords_avail)
+{
+ int retval = 0;
+
+ if (hsotg->core_params->dma_enable > 0) {
+ if (hsotg->core_params->dma_desc_enable > 0) {
+ if (!chan->xfer_started ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+ dwc2_hcd_start_xfer_ddma(hsotg, chan->qh);
+ chan->qh->ping_state = 0;
+ }
+ } else if (!chan->xfer_started) {
+ dwc2_hc_start_transfer(hsotg, chan);
+ chan->qh->ping_state = 0;
+ }
+ } else if (chan->halt_pending) {
+ /* Don't queue a request if the channel has been halted */
+ } else if (chan->halt_on_queue) {
+ dwc2_hc_halt(hsotg, chan, chan->halt_status);
+ } else if (chan->do_ping) {
+ if (!chan->xfer_started)
+ dwc2_hc_start_transfer(hsotg, chan);
+ } else if (!chan->ep_is_in ||
+ chan->data_pid_start == DWC2_HC_PID_SETUP) {
+ if ((fifo_dwords_avail * 4) >= chan->max_packet) {
+ if (!chan->xfer_started) {
+ dwc2_hc_start_transfer(hsotg, chan);
+ retval = 1;
+ } else {
+ retval = dwc2_hc_continue_transfer(hsotg, chan);
+ }
+ } else {
+ retval = -1;
+ }
+ } else {
+ if (!chan->xfer_started) {
+ dwc2_hc_start_transfer(hsotg, chan);
+ retval = 1;
+ } else {
+ retval = dwc2_hc_continue_transfer(hsotg, chan);
+ }
+ }
+
+ return retval;
+}
+
+/*
+ * Processes periodic channels for the next frame and queues transactions for
+ * these channels to the DWC_otg controller. After queueing transactions, the
+ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
+ * to queue as Periodic Tx FIFO or request queue space becomes available.
+ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg)
+{
+ struct list_head *qh_ptr;
+ struct dwc2_qh *qh;
+ u32 tx_status;
+ u32 fspcavail;
+ u32 gintmsk;
+ int status;
+ int no_queue_space = 0;
+ int no_fifo_space = 0;
+ u32 qspcavail;
+
+ dev_vdbg(hsotg->dev, "Queue periodic transactions\n");
+
+ tx_status = readl(hsotg->regs + HPTXSTS);
+ qspcavail = tx_status >> TXSTS_QSPCAVAIL_SHIFT &
+ TXSTS_QSPCAVAIL_MASK >> TXSTS_QSPCAVAIL_SHIFT;
+ fspcavail = tx_status >> TXSTS_FSPCAVAIL_SHIFT &
+ TXSTS_FSPCAVAIL_MASK >> TXSTS_FSPCAVAIL_SHIFT;
+ dev_vdbg(hsotg->dev, " P Tx Req Queue Space Avail (before queue): %d\n",
+ qspcavail);
+ dev_vdbg(hsotg->dev, " P Tx FIFO Space Avail (before queue): %d\n",
+ fspcavail);
+
+ qh_ptr = hsotg->periodic_sched_assigned.next;
+ while (qh_ptr != &hsotg->periodic_sched_assigned) {
+ tx_status = readl(hsotg->regs + HPTXSTS);
+ if ((tx_status & TXSTS_QSPCAVAIL_MASK) == 0) {
+ no_queue_space = 1;
+ break;
+ }
+
+ qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
+ if (!qh->channel) {
+ qh_ptr = qh_ptr->next;
+ continue;
+ }
+
+ /* Make sure EP's TT buffer is clean before queueing qtds */
+ if (qh->tt_buffer_dirty) {
+ qh_ptr = qh_ptr->next;
+ continue;
+ }
+
+ /*
+ * Set a flag if we're queuing high-bandwidth in slave mode.
+ * The flag prevents any halts to get into the request queue in
+ * the middle of multiple high-bandwidth packets getting queued.
+ */
+ if (hsotg->core_params->dma_enable <= 0 &&
+ qh->channel->multi_count > 1)
+ hsotg->queuing_high_bandwidth = 1;
+
+ fspcavail = tx_status >> TXSTS_FSPCAVAIL_SHIFT &
+ TXSTS_FSPCAVAIL_MASK >> TXSTS_FSPCAVAIL_SHIFT;
+ status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail);
+ if (status < 0) {
+ no_fifo_space = 1;
+ break;
+ }
+
+ /*
+ * In Slave mode, stay on the current transfer until there is
+ * nothing more to do or the high-bandwidth request count is
+ * reached. In DMA mode, only need to queue one request. The
+ * controller automatically handles multiple packets for
+ * high-bandwidth transfers.
+ */
+ if (hsotg->core_params->dma_enable > 0 || status == 0 ||
+ qh->channel->requests == qh->channel->multi_count) {
+ qh_ptr = qh_ptr->next;
+ /*
+ * Move the QH from the periodic assigned schedule to
+ * the periodic queued schedule
+ */
+ list_move(&qh->qh_list_entry,
+ &hsotg->periodic_sched_queued);
+
+ /* done queuing high bandwidth */
+ hsotg->queuing_high_bandwidth = 0;
+ }
+ }
+
+ if (hsotg->core_params->dma_enable <= 0) {
+ tx_status = readl(hsotg->regs + HPTXSTS);
+ qspcavail = tx_status >> TXSTS_QSPCAVAIL_SHIFT &
+ TXSTS_QSPCAVAIL_MASK >> TXSTS_QSPCAVAIL_SHIFT;
+ fspcavail = tx_status >> TXSTS_FSPCAVAIL_SHIFT &
+ TXSTS_FSPCAVAIL_MASK >> TXSTS_FSPCAVAIL_SHIFT;
+ dev_vdbg(hsotg->dev,
+ " P Tx Req Queue Space Avail (after queue): %d\n",
+ qspcavail);
+ dev_vdbg(hsotg->dev,
+ " P Tx FIFO Space Avail (after queue): %d\n",
+ fspcavail);
+
+ if (!list_empty(&hsotg->periodic_sched_assigned) ||
+ no_queue_space || no_fifo_space) {
+ /*
+ * May need to queue more transactions as the request
+ * queue or Tx FIFO empties. Enable the periodic Tx
+ * FIFO empty interrupt. (Always use the half-empty
+ * level to ensure that new requests are loaded as
+ * soon as possible.)
+ */
+ gintmsk = readl(hsotg->regs + GINTMSK);
+ gintmsk |= GINTSTS_PTXFEMP;
+ writel(gintmsk, hsotg->regs + GINTMSK);
+ } else {
+ /*
+ * Disable the Tx FIFO empty interrupt since there are
+ * no more transactions that need to be queued right
+ * now. This function is called from interrupt
+ * handlers to queue more transactions as transfer
+ * states change.
+ */
+ gintmsk = readl(hsotg->regs + GINTMSK);
+ gintmsk &= ~GINTSTS_PTXFEMP;
+ writel(gintmsk, hsotg->regs + GINTMSK);
+ }
+ }
+}
+
+/*
+ * Processes active non-periodic channels and queues transactions for these
+ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
+ * FIFO Empty interrupt is enabled if there are more transactions to queue as
+ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
+ * FIFO Empty interrupt is disabled.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+static void dwc2_process_non_periodic_channels(struct dwc2_hsotg *hsotg)
+{
+ struct list_head *orig_qh_ptr;
+ struct dwc2_qh *qh;
+ u32 tx_status;
+ u32 qspcavail;
+ u32 fspcavail;
+ u32 gintmsk;
+ int status;
+ int no_queue_space = 0;
+ int no_fifo_space = 0;
+ int more_to_do = 0;
+
+ dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n");
+
+ tx_status = readl(hsotg->regs + GNPTXSTS);
+ qspcavail = tx_status >> TXSTS_QSPCAVAIL_SHIFT &
+ TXSTS_QSPCAVAIL_MASK >> TXSTS_QSPCAVAIL_SHIFT;
+ fspcavail = tx_status >> TXSTS_FSPCAVAIL_SHIFT &
+ TXSTS_FSPCAVAIL_MASK >> TXSTS_FSPCAVAIL_SHIFT;
+ dev_vdbg(hsotg->dev, " NP Tx Req Queue Space Avail (before queue): %d\n",
+ qspcavail);
+ dev_vdbg(hsotg->dev, " NP Tx FIFO Space Avail (before queue): %d\n",
+ fspcavail);
+
+ /*
+ * Keep track of the starting point. Skip over the start-of-list
+ * entry.
+ */
+ if (hsotg->non_periodic_qh_ptr == &hsotg->non_periodic_sched_active)
+ hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next;
+ orig_qh_ptr = hsotg->non_periodic_qh_ptr;
+
+ /*
+ * Process once through the active list or until no more space is
+ * available in the request queue or the Tx FIFO
+ */
+ do {
+ tx_status = readl(hsotg->regs + GNPTXSTS);
+ qspcavail = tx_status >> TXSTS_QSPCAVAIL_SHIFT &
+ TXSTS_QSPCAVAIL_MASK >> TXSTS_QSPCAVAIL_SHIFT;
+ if (hsotg->core_params->dma_enable <= 0 && qspcavail == 0) {
+ no_queue_space = 1;
+ break;
+ }
+
+ qh = list_entry(hsotg->non_periodic_qh_ptr, struct dwc2_qh,
+ qh_list_entry);
+ if (!qh->channel)
+ goto next;
+
+ /* Make sure EP's TT buffer is clean before queueing qtds */
+ if (qh->tt_buffer_dirty)
+ goto next;
+
+ fspcavail = tx_status >> TXSTS_FSPCAVAIL_SHIFT &
+ TXSTS_FSPCAVAIL_MASK >> TXSTS_FSPCAVAIL_SHIFT;
+ status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail);
+
+ if (status > 0) {
+ more_to_do = 1;
+ } else if (status < 0) {
+ no_fifo_space = 1;
+ break;
+ }
+next:
+ /* Advance to next QH, skipping start-of-list entry */
+ hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next;
+ if (hsotg->non_periodic_qh_ptr ==
+ &hsotg->non_periodic_sched_active)
+ hsotg->non_periodic_qh_ptr =
+ hsotg->non_periodic_qh_ptr->next;
+ } while (hsotg->non_periodic_qh_ptr != orig_qh_ptr);
+
+ if (hsotg->core_params->dma_enable <= 0) {
+ tx_status = readl(hsotg->regs + GNPTXSTS);
+ qspcavail = tx_status >> TXSTS_QSPCAVAIL_SHIFT &
+ TXSTS_QSPCAVAIL_MASK >> TXSTS_QSPCAVAIL_SHIFT;
+ fspcavail = tx_status >> TXSTS_FSPCAVAIL_SHIFT &
+ TXSTS_FSPCAVAIL_MASK >> TXSTS_FSPCAVAIL_SHIFT;
+ dev_vdbg(hsotg->dev,
+ " NP Tx Req Queue Space Avail (after queue): %d\n",
+ qspcavail);
+ dev_vdbg(hsotg->dev,
+ " NP Tx FIFO Space Avail (after queue): %d\n",
+ fspcavail);
+
+ if (more_to_do || no_queue_space || no_fifo_space) {
+ /*
+ * May need to queue more transactions as the request
+ * queue or Tx FIFO empties. Enable the non-periodic
+ * Tx FIFO empty interrupt. (Always use the half-empty
+ * level to ensure that new requests are loaded as
+ * soon as possible.)
+ */
+ gintmsk = readl(hsotg->regs + GINTMSK);
+ gintmsk |= GINTSTS_NPTXFEMP;
+ writel(gintmsk, hsotg->regs + GINTMSK);
+ } else {
+ /*
+ * Disable the Tx FIFO empty interrupt since there are
+ * no more transactions that need to be queued right
+ * now. This function is called from interrupt
+ * handlers to queue more transactions as transfer
+ * states change.
+ */
+ gintmsk = readl(hsotg->regs + GINTMSK);
+ gintmsk &= ~GINTSTS_NPTXFEMP;
+ writel(gintmsk, hsotg->regs + GINTMSK);
+ }
+ }
+}
+
+/**
+ * dwc2_hcd_queue_transactions() - Processes the currently active host channels
+ * and queues transactions for these channels to the DWC_otg controller. Called
+ * from the HCD interrupt handler functions.
+ *
+ * @hsotg: The HCD state structure
+ * @tr_type: The type(s) of transactions to queue (non-periodic, periodic,
+ * or both)
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg,
+ enum dwc2_transaction_type tr_type)
+{
+#ifdef DWC2_DEBUG_SOF
+ dev_vdbg(hsotg->dev, "Queue Transactions\n");
+#endif
+ /* Process host channels associated with periodic transfers */
+ if ((tr_type == DWC2_TRANSACTION_PERIODIC ||
+ tr_type == DWC2_TRANSACTION_ALL) &&
+ !list_empty(&hsotg->periodic_sched_assigned))
+ dwc2_process_periodic_channels(hsotg);
+
+ /* Process host channels associated with non-periodic transfers */
+ if (tr_type == DWC2_TRANSACTION_NON_PERIODIC ||
+ tr_type == DWC2_TRANSACTION_ALL) {
+ if (!list_empty(&hsotg->non_periodic_sched_active)) {
+ dwc2_process_non_periodic_channels(hsotg);
+ } else {
+ /*
+ * Ensure NP Tx FIFO empty interrupt is disabled when
+ * there are no non-periodic transfers to process
+ */
+ u32 gintmsk = readl(hsotg->regs + GINTMSK);
+
+ gintmsk &= ~GINTSTS_NPTXFEMP;
+ writel(gintmsk, hsotg->regs + GINTMSK);
+ }
+ }
+}
+
+static void dwc2_conn_id_status_change(struct work_struct *work)
+{
+ struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
+ wf_otg);
+ u32 count = 0;
+ u32 gotgctl;
+
+ dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+ gotgctl = readl(hsotg->regs + GOTGCTL);
+ dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl);
+ dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n",
+ !!(gotgctl & GOTGCTL_CONID_B));
+
+ /* B-Device connector (Device Mode) */
+ if (gotgctl & GOTGCTL_CONID_B) {
+ /* Wait for switch to device mode */
+ dev_dbg(hsotg->dev, "connId B\n");
+ while (!dwc2_is_device_mode(hsotg)) {
+ dev_info(hsotg->dev,
+ "Waiting for Peripheral Mode, Mode=%s\n",
+ dwc2_is_host_mode(hsotg) ? "Host" :
+ "Peripheral");
+ usleep_range(20000, 40000);
+ if (++count > 250)
+ break;
+ }
+ if (count > 250)
+ dev_err(hsotg->dev,
+ "Connection id status change timed out");
+ hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+ dwc2_core_init(hsotg, false);
+ dwc2_enable_global_interrupts(hsotg);
+ } else {
+ /* A-Device connector (Host Mode) */
+ dev_dbg(hsotg->dev, "connId A\n");
+ while (!dwc2_is_host_mode(hsotg)) {
+ dev_info(hsotg->dev, "Waiting for Host Mode, Mode=%s\n",
+ dwc2_is_host_mode(hsotg) ?
+ "Host" : "Peripheral");
+ usleep_range(20000, 40000);
+ if (++count > 250)
+ break;
+ }
+ if (count > 250)
+ dev_err(hsotg->dev,
+ "Connection id status change timed out");
+ hsotg->op_state = OTG_STATE_A_HOST;
+
+ /* Initialize the Core for Host mode */
+ dwc2_core_init(hsotg, false);
+ dwc2_enable_global_interrupts(hsotg);
+ dwc2_hcd_start(hsotg);
+ }
+}
+
+static void dwc2_wakeup_detected(unsigned long data)
+{
+ struct dwc2_hsotg *hsotg = (struct dwc2_hsotg *)data;
+ u32 hprt0;
+
+ dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+ /*
+ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
+ * so that OPT tests pass with all PHYs.)
+ */
+ hprt0 = dwc2_read_hprt0(hsotg);
+ dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0);
+ hprt0 &= ~HPRT0_RES;
+ writel(hprt0, hsotg->regs + HPRT0);
+ dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n",
+ readl(hsotg->regs + HPRT0));
+
+ dwc2_hcd_rem_wakeup(hsotg);
+
+ /* Change to L0 state */
+ hsotg->lx_state = DWC2_L0;
+}
+
+static int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg)
+{
+ struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
+
+ return hcd->self.b_hnp_enable;
+}
+
+/* Must NOT be called with interrupt disabled or spinlock held */
+static void dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
+{
+ unsigned long flags;
+ u32 hprt0;
+ u32 pcgctl;
+ u32 gotgctl;
+
+ dev_dbg(hsotg->dev, "%s()\n", __func__);
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) {
+ gotgctl = readl(hsotg->regs + GOTGCTL);
+ gotgctl |= GOTGCTL_HSTSETHNPEN;
+ writel(gotgctl, hsotg->regs + GOTGCTL);
+ hsotg->op_state = OTG_STATE_A_SUSPEND;
+ }
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 |= HPRT0_SUSP;
+ writel(hprt0, hsotg->regs + HPRT0);
+
+ /* Update lx_state */
+ hsotg->lx_state = DWC2_L2;
+
+ /* Suspend the Phy Clock */
+ pcgctl = readl(hsotg->regs + PCGCTL);
+ pcgctl |= PCGCTL_STOPPCLK;
+ writel(pcgctl, hsotg->regs + PCGCTL);
+ udelay(10);
+
+ /* For HNP the bus must be suspended for at least 200ms */
+ if (dwc2_host_is_b_hnp_enabled(hsotg)) {
+ pcgctl = readl(hsotg->regs + PCGCTL);
+ pcgctl &= ~PCGCTL_STOPPCLK;
+ writel(pcgctl, hsotg->regs + PCGCTL);
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ usleep_range(200000, 250000);
+ } else {
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ }
+}
+
+/* Handles hub class-specific requests */
+static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
+ u16 wvalue, u16 windex, char *buf, u16 wlength)
+{
+ struct usb_hub_descriptor *hub_desc;
+ int retval = 0;
+ u32 hprt0;
+ u32 port_status;
+ u32 speed;
+ u32 pcgctl;
+
+ switch (typereq) {
+ case ClearHubFeature:
+ dev_dbg(hsotg->dev, "ClearHubFeature %1xh\n", wvalue);
+
+ switch (wvalue) {
+ case C_HUB_LOCAL_POWER:
+ case C_HUB_OVER_CURRENT:
+ /* Nothing required here */
+ break;
+
+ default:
+ retval = -EINVAL;
+ dev_err(hsotg->dev,
+ "ClearHubFeature request %1xh unknown\n",
+ wvalue);
+ }
+ break;
+
+ case ClearPortFeature:
+ if (wvalue != USB_PORT_FEAT_L1)
+ if (!windex || windex > 1)
+ goto error;
+ switch (wvalue) {
+ case USB_PORT_FEAT_ENABLE:
+ dev_dbg(hsotg->dev,
+ "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 |= HPRT0_ENA;
+ writel(hprt0, hsotg->regs + HPRT0);
+ break;
+
+ case USB_PORT_FEAT_SUSPEND:
+ dev_dbg(hsotg->dev,
+ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
+ writel(0, hsotg->regs + PCGCTL);
+ usleep_range(20000, 40000);
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 |= HPRT0_RES;
+ writel(hprt0, hsotg->regs + HPRT0);
+ hprt0 &= ~HPRT0_SUSP;
+ usleep_range(100000, 150000);
+
+ hprt0 &= ~HPRT0_RES;
+ writel(hprt0, hsotg->regs + HPRT0);
+ break;
+
+ case USB_PORT_FEAT_POWER:
+ dev_dbg(hsotg->dev,
+ "ClearPortFeature USB_PORT_FEAT_POWER\n");
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 &= ~HPRT0_PWR;
+ writel(hprt0, hsotg->regs + HPRT0);
+ break;
+
+ case USB_PORT_FEAT_INDICATOR:
+ dev_dbg(hsotg->dev,
+ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
+ /* Port indicator not supported */
+ break;
+
+ case USB_PORT_FEAT_C_CONNECTION:
+ /*
+ * Clears driver's internal Connect Status Change flag
+ */
+ dev_dbg(hsotg->dev,
+ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
+ hsotg->flags.b.port_connect_status_change = 0;
+ break;
+
+ case USB_PORT_FEAT_C_RESET:
+ /* Clears driver's internal Port Reset Change flag */
+ dev_dbg(hsotg->dev,
+ "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
+ hsotg->flags.b.port_reset_change = 0;
+ break;
+
+ case USB_PORT_FEAT_C_ENABLE:
+ /*
+ * Clears the driver's internal Port Enable/Disable
+ * Change flag
+ */
+ dev_dbg(hsotg->dev,
+ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
+ hsotg->flags.b.port_enable_change = 0;
+ break;
+
+ case USB_PORT_FEAT_C_SUSPEND:
+ /*
+ * Clears the driver's internal Port Suspend Change
+ * flag, which is set when resume signaling on the host
+ * port is complete
+ */
+ dev_dbg(hsotg->dev,
+ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
+ hsotg->flags.b.port_suspend_change = 0;
+ break;
+
+ case USB_PORT_FEAT_C_PORT_L1:
+ dev_dbg(hsotg->dev,
+ "ClearPortFeature USB_PORT_FEAT_C_PORT_L1\n");
+ hsotg->flags.b.port_l1_change = 0;
+ break;
+
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ dev_dbg(hsotg->dev,
+ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
+ hsotg->flags.b.port_over_current_change = 0;
+ break;
+
+ default:
+ retval = -EINVAL;
+ dev_err(hsotg->dev,
+ "ClearPortFeature request %1xh unknown or unsupported\n",
+ wvalue);
+ }
+ break;
+
+ case GetHubDescriptor:
+ dev_dbg(hsotg->dev, "GetHubDescriptor\n");
+ hub_desc = (struct usb_hub_descriptor *)buf;
+ hub_desc->bDescLength = 9;
+ hub_desc->bDescriptorType = 0x29;
+ hub_desc->bNbrPorts = 1;
+ hub_desc->wHubCharacteristics = cpu_to_le16(0x08);
+ hub_desc->bPwrOn2PwrGood = 1;
+ hub_desc->bHubContrCurrent = 0;
+ hub_desc->u.hs.DeviceRemovable[0] = 0;
+ hub_desc->u.hs.DeviceRemovable[1] = 0xff;
+ break;
+
+ case GetHubStatus:
+ dev_dbg(hsotg->dev, "GetHubStatus\n");
+ memset(buf, 0, 4);
+ break;
+
+ case GetPortStatus:
+ dev_dbg(hsotg->dev,
+ "GetPortStatus wIndex=0x%04x flags=0x%08x\n", windex,
+ hsotg->flags.d32);
+ if (!windex || windex > 1)
+ goto error;
+
+ port_status = 0;
+ if (hsotg->flags.b.port_connect_status_change)
+ port_status |= USB_PORT_STAT_C_CONNECTION << 16;
+ if (hsotg->flags.b.port_enable_change)
+ port_status |= USB_PORT_STAT_C_ENABLE << 16;
+ if (hsotg->flags.b.port_suspend_change)
+ port_status |= USB_PORT_STAT_C_SUSPEND << 16;
+ if (hsotg->flags.b.port_l1_change)
+ port_status |= USB_PORT_STAT_C_L1 << 16;
+ if (hsotg->flags.b.port_reset_change)
+ port_status |= USB_PORT_STAT_C_RESET << 16;
+ if (hsotg->flags.b.port_over_current_change) {
+ dev_warn(hsotg->dev, "Overcurrent change detected\n");
+ port_status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+ }
+
+ if (!hsotg->flags.b.port_connect_status) {
+ /*
+ * The port is disconnected, which means the core is
+ * either in device mode or it soon will be. Just
+ * return 0's for the remainder of the port status
+ * since the port register can't be read if the core
+ * is in device mode.
+ */
+ *(__le32 *)buf = cpu_to_le32(port_status);
+ break;
+ }
+
+ hprt0 = readl(hsotg->regs + HPRT0);
+ dev_dbg(hsotg->dev, " HPRT0: 0x%08x\n", hprt0);
+
+ if (hprt0 & HPRT0_CONNSTS)
+ port_status |= USB_PORT_STAT_CONNECTION;
+ if (hprt0 & HPRT0_ENA)
+ port_status |= USB_PORT_STAT_ENABLE;
+ if (hprt0 & HPRT0_SUSP)
+ port_status |= USB_PORT_STAT_SUSPEND;
+ if (hprt0 & HPRT0_OVRCURRACT)
+ port_status |= USB_PORT_STAT_OVERCURRENT;
+ if (hprt0 & HPRT0_RST)
+ port_status |= USB_PORT_STAT_RESET;
+ if (hprt0 & HPRT0_PWR)
+ port_status |= USB_PORT_STAT_POWER;
+
+ speed = hprt0 & HPRT0_SPD_MASK;
+ if (speed == HPRT0_SPD_HIGH_SPEED)
+ port_status |= USB_PORT_STAT_HIGH_SPEED;
+ else if (speed == HPRT0_SPD_LOW_SPEED)
+ port_status |= USB_PORT_STAT_LOW_SPEED;
+
+ if (hprt0 & HPRT0_TSTCTL_MASK)
+ port_status |= USB_PORT_STAT_TEST;
+ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
+
+ dev_dbg(hsotg->dev, "port_status=%08x\n", port_status);
+ *(__le32 *)buf = cpu_to_le32(port_status);
+ break;
+
+ case SetHubFeature:
+ dev_dbg(hsotg->dev, "SetHubFeature\n");
+ /* No HUB features supported */
+ break;
+
+ case SetPortFeature:
+ dev_dbg(hsotg->dev, "SetPortFeature\n");
+ if (wvalue != USB_PORT_FEAT_TEST && (!windex || windex > 1))
+ goto error;
+
+ if (!hsotg->flags.b.port_connect_status) {
+ /*
+ * The port is disconnected, which means the core is
+ * either in device mode or it soon will be. Just
+ * return without doing anything since the port
+ * register can't be written if the core is in device
+ * mode.
+ */
+ break;
+ }
+
+ switch (wvalue) {
+ case USB_PORT_FEAT_SUSPEND:
+ dev_dbg(hsotg->dev,
+ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
+ if (windex != hsotg->otg_port)
+ goto error;
+ dwc2_port_suspend(hsotg, windex);
+ break;
+
+ case USB_PORT_FEAT_POWER:
+ dev_dbg(hsotg->dev,
+ "SetPortFeature - USB_PORT_FEAT_POWER\n");
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 |= HPRT0_PWR;
+ writel(hprt0, hsotg->regs + HPRT0);
+ break;
+
+ case USB_PORT_FEAT_RESET:
+ hprt0 = dwc2_read_hprt0(hsotg);
+ dev_dbg(hsotg->dev,
+ "SetPortFeature - USB_PORT_FEAT_RESET\n");
+ pcgctl = readl(hsotg->regs + PCGCTL);
+ pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK);
+ writel(pcgctl, hsotg->regs + PCGCTL);
+ /* ??? Original driver does this */
+ writel(0, hsotg->regs + PCGCTL);
+
+ hprt0 = dwc2_read_hprt0(hsotg);
+ /* Clear suspend bit if resetting from suspend state */
+ hprt0 &= ~HPRT0_SUSP;
+
+ /*
+ * When B-Host the Port reset bit is set in the Start
+ * HCD Callback function, so that the reset is started
+ * within 1ms of the HNP success interrupt
+ */
+ if (!dwc2_hcd_is_b_host(hsotg)) {
+ hprt0 |= HPRT0_PWR | HPRT0_RST;
+ dev_dbg(hsotg->dev,
+ "In host mode, hprt0=%08x\n", hprt0);
+ writel(hprt0, hsotg->regs + HPRT0);
+ }
+
+ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
+ usleep_range(50000, 70000);
+ hprt0 &= ~HPRT0_RST;
+ writel(hprt0, hsotg->regs + HPRT0);
+ hsotg->lx_state = DWC2_L0; /* Now back to On state */
+ break;
+
+ case USB_PORT_FEAT_INDICATOR:
+ dev_dbg(hsotg->dev,
+ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
+ /* Not supported */
+ break;
+
+ default:
+ retval = -EINVAL;
+ dev_err(hsotg->dev,
+ "SetPortFeature %1xh unknown or unsupported\n",
+ wvalue);
+ break;
+ }
+ break;
+
+ default:
+error:
+ retval = -EINVAL;
+ dev_dbg(hsotg->dev,
+ "Unknown hub control request: %1xh wIndex: %1xh wValue: %1xh\n",
+ typereq, windex, wvalue);
+ break;
+ }
+
+ return retval;
+}
+
+static int dwc2_hcd_is_status_changed(struct dwc2_hsotg *hsotg, int port)
+{
+ int retval;
+
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ if (port != 1)
+ return -EINVAL;
+
+ retval = (hsotg->flags.b.port_connect_status_change ||
+ hsotg->flags.b.port_reset_change ||
+ hsotg->flags.b.port_enable_change ||
+ hsotg->flags.b.port_suspend_change ||
+ hsotg->flags.b.port_over_current_change);
+
+ if (retval) {
+ dev_dbg(hsotg->dev,
+ "DWC OTG HCD HUB STATUS DATA: Root port status changed\n");
+ dev_dbg(hsotg->dev, " port_connect_status_change: %d\n",
+ hsotg->flags.b.port_connect_status_change);
+ dev_dbg(hsotg->dev, " port_reset_change: %d\n",
+ hsotg->flags.b.port_reset_change);
+ dev_dbg(hsotg->dev, " port_enable_change: %d\n",
+ hsotg->flags.b.port_enable_change);
+ dev_dbg(hsotg->dev, " port_suspend_change: %d\n",
+ hsotg->flags.b.port_suspend_change);
+ dev_dbg(hsotg->dev, " port_over_current_change: %d\n",
+ hsotg->flags.b.port_over_current_change);
+ }
+
+ return retval;
+}
+
+int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
+{
+ u32 hfnum = readl(hsotg->regs + HFNUM);
+
+#ifdef DWC2_DEBUG_SOF
+ dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n",
+ hfnum >> HFNUM_FRNUM_SHIFT &
+ HFNUM_FRNUM_MASK >> HFNUM_FRNUM_SHIFT);
+#endif
+ return hfnum >> HFNUM_FRNUM_SHIFT &
+ HFNUM_FRNUM_MASK >> HFNUM_FRNUM_SHIFT;
+}
+
+int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg)
+{
+ return (hsotg->op_state == OTG_STATE_B_HOST);
+}
+
+static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg,
+ int iso_desc_count,
+ gfp_t mem_flags)
+{
+ struct dwc2_hcd_urb *urb;
+ u32 size = sizeof(*urb) + iso_desc_count *
+ sizeof(struct dwc2_hcd_iso_packet_desc);
+
+ urb = kzalloc(size, mem_flags);
+ if (urb)
+ urb->packet_count = iso_desc_count;
+ return urb;
+}
+
+static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg,
+ struct dwc2_hcd_urb *urb, u8 dev_addr,
+ u8 ep_num, u8 ep_type, u8 ep_dir, u16 mps)
+{
+ dev_vdbg(hsotg->dev,
+ "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, mps=%d\n",
+ dev_addr, ep_num, ep_dir, ep_type, mps);
+ urb->pipe_info.dev_addr = dev_addr;
+ urb->pipe_info.ep_num = ep_num;
+ urb->pipe_info.pipe_type = ep_type;
+ urb->pipe_info.pipe_dir = ep_dir;
+ urb->pipe_info.mps = mps;
+}
+
+/*
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg)
+{
+#ifdef DEBUG
+ struct dwc2_host_chan *chan;
+ struct dwc2_hcd_urb *urb;
+ struct dwc2_qtd *qtd;
+ int num_channels;
+ u32 np_tx_status;
+ u32 p_tx_status;
+ int i;
+
+ num_channels = hsotg->core_params->host_channels;
+ dev_dbg(hsotg->dev, "\n");
+ dev_dbg(hsotg->dev,
+ "************************************************************\n");
+ dev_dbg(hsotg->dev, "HCD State:\n");
+ dev_dbg(hsotg->dev, " Num channels: %d\n", num_channels);
+
+ for (i = 0; i < num_channels; i++) {
+ chan = hsotg->hc_ptr_array[i];
+ dev_dbg(hsotg->dev, " Channel %d:\n", i);
+ dev_dbg(hsotg->dev,
+ " dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
+ chan->dev_addr, chan->ep_num, chan->ep_is_in);
+ dev_dbg(hsotg->dev, " speed: %d\n", chan->speed);
+ dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type);
+ dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet);
+ dev_dbg(hsotg->dev, " data_pid_start: %d\n",
+ chan->data_pid_start);
+ dev_dbg(hsotg->dev, " multi_count: %d\n", chan->multi_count);
+ dev_dbg(hsotg->dev, " xfer_started: %d\n",
+ chan->xfer_started);
+ dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf);
+ dev_dbg(hsotg->dev, " xfer_dma: %08lx\n",
+ (unsigned long)chan->xfer_dma);
+ dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len);
+ dev_dbg(hsotg->dev, " xfer_count: %d\n", chan->xfer_count);
+ dev_dbg(hsotg->dev, " halt_on_queue: %d\n",
+ chan->halt_on_queue);
+ dev_dbg(hsotg->dev, " halt_pending: %d\n",
+ chan->halt_pending);
+ dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status);
+ dev_dbg(hsotg->dev, " do_split: %d\n", chan->do_split);
+ dev_dbg(hsotg->dev, " complete_split: %d\n",
+ chan->complete_split);
+ dev_dbg(hsotg->dev, " hub_addr: %d\n", chan->hub_addr);
+ dev_dbg(hsotg->dev, " hub_port: %d\n", chan->hub_port);
+ dev_dbg(hsotg->dev, " xact_pos: %d\n", chan->xact_pos);
+ dev_dbg(hsotg->dev, " requests: %d\n", chan->requests);
+ dev_dbg(hsotg->dev, " qh: %p\n", chan->qh);
+
+ if (chan->xfer_started) {
+ u32 hfnum, hcchar, hctsiz, hcint, hcintmsk;
+
+ hfnum = readl(hsotg->regs + HFNUM);
+ hcchar = readl(hsotg->regs + HCCHAR(i));
+ hctsiz = readl(hsotg->regs + HCTSIZ(i));
+ hcint = readl(hsotg->regs + HCINT(i));
+ hcintmsk = readl(hsotg->regs + HCINTMSK(i));
+ dev_dbg(hsotg->dev, " hfnum: 0x%08x\n", hfnum);
+ dev_dbg(hsotg->dev, " hcchar: 0x%08x\n", hcchar);
+ dev_dbg(hsotg->dev, " hctsiz: 0x%08x\n", hctsiz);
+ dev_dbg(hsotg->dev, " hcint: 0x%08x\n", hcint);
+ dev_dbg(hsotg->dev, " hcintmsk: 0x%08x\n", hcintmsk);
+ }
+
+ if (!(chan->xfer_started && chan->qh))
+ continue;
+
+ list_for_each_entry(qtd, &chan->qh->qtd_list, qtd_list_entry) {
+ if (!qtd->in_process)
+ break;
+ urb = qtd->urb;
+ dev_dbg(hsotg->dev, " URB Info:\n");
+ dev_dbg(hsotg->dev, " qtd: %p, urb: %p\n",
+ qtd, urb);
+ if (urb) {
+ dev_dbg(hsotg->dev,
+ " Dev: %d, EP: %d %s\n",
+ dwc2_hcd_get_dev_addr(&urb->pipe_info),
+ dwc2_hcd_get_ep_num(&urb->pipe_info),
+ dwc2_hcd_is_pipe_in(&urb->pipe_info) ?
+ "IN" : "OUT");
+ dev_dbg(hsotg->dev,
+ " Max packet size: %d\n",
+ dwc2_hcd_get_mps(&urb->pipe_info));
+ dev_dbg(hsotg->dev,
+ " transfer_buffer: %p\n",
+ urb->buf);
+ dev_dbg(hsotg->dev, " transfer_dma: %p\n",
+ (void *)urb->dma);
+ dev_dbg(hsotg->dev,
+ " transfer_buffer_length: %d\n",
+ urb->length);
+ dev_dbg(hsotg->dev, " actual_length: %d\n",
+ urb->actual_length);
+ }
+ }
+ }
+
+ dev_dbg(hsotg->dev, " non_periodic_channels: %d\n",
+ hsotg->non_periodic_channels);
+ dev_dbg(hsotg->dev, " periodic_channels: %d\n",
+ hsotg->periodic_channels);
+ dev_dbg(hsotg->dev, " periodic_usecs: %d\n", hsotg->periodic_usecs);
+ np_tx_status = readl(hsotg->regs + GNPTXSTS);
+ dev_dbg(hsotg->dev, " NP Tx Req Queue Space Avail: %d\n",
+ np_tx_status >> TXSTS_QSPCAVAIL_SHIFT &
+ TXSTS_QSPCAVAIL_MASK >> TXSTS_QSPCAVAIL_SHIFT);
+ dev_dbg(hsotg->dev, " NP Tx FIFO Space Avail: %d\n",
+ np_tx_status >> TXSTS_FSPCAVAIL_SHIFT &
+ TXSTS_FSPCAVAIL_MASK >> TXSTS_FSPCAVAIL_SHIFT);
+ p_tx_status = readl(hsotg->regs + HPTXSTS);
+ dev_dbg(hsotg->dev, " P Tx Req Queue Space Avail: %d\n",
+ p_tx_status >> TXSTS_QSPCAVAIL_SHIFT &
+ TXSTS_QSPCAVAIL_MASK >> TXSTS_QSPCAVAIL_SHIFT);
+ dev_dbg(hsotg->dev, " P Tx FIFO Space Avail: %d\n",
+ p_tx_status >> TXSTS_FSPCAVAIL_SHIFT &
+ TXSTS_FSPCAVAIL_MASK >> TXSTS_FSPCAVAIL_SHIFT);
+ dwc2_hcd_dump_frrem(hsotg);
+ dwc2_dump_global_registers(hsotg);
+ dwc2_dump_host_registers(hsotg);
+ dev_dbg(hsotg->dev,
+ "************************************************************\n");
+ dev_dbg(hsotg->dev, "\n");
+#endif
+}
+
+/*
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+void dwc2_hcd_dump_frrem(struct dwc2_hsotg *hsotg)
+{
+#ifdef DWC2_DUMP_FRREM
+ dev_dbg(hsotg->dev, "Frame remaining at SOF:\n");
+ dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n",
+ hsotg->frrem_samples, hsotg->frrem_accum,
+ hsotg->frrem_samples > 0 ?
+ hsotg->frrem_accum / hsotg->frrem_samples : 0);
+ dev_dbg(hsotg->dev, "\n");
+ dev_dbg(hsotg->dev, "Frame remaining at start_transfer (uframe 7):\n");
+ dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n",
+ hsotg->hfnum_7_samples,
+ hsotg->hfnum_7_frrem_accum,
+ hsotg->hfnum_7_samples > 0 ?
+ hsotg->hfnum_7_frrem_accum / hsotg->hfnum_7_samples : 0);
+ dev_dbg(hsotg->dev, "Frame remaining at start_transfer (uframe 0):\n");
+ dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n",
+ hsotg->hfnum_0_samples,
+ hsotg->hfnum_0_frrem_accum,
+ hsotg->hfnum_0_samples > 0 ?
+ hsotg->hfnum_0_frrem_accum / hsotg->hfnum_0_samples : 0);
+ dev_dbg(hsotg->dev, "Frame remaining at start_transfer (uframe 1-6):\n");
+ dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n",
+ hsotg->hfnum_other_samples,
+ hsotg->hfnum_other_frrem_accum,
+ hsotg->hfnum_other_samples > 0 ?
+ hsotg->hfnum_other_frrem_accum / hsotg->hfnum_other_samples :
+ 0);
+ dev_dbg(hsotg->dev, "\n");
+ dev_dbg(hsotg->dev, "Frame remaining at sample point A (uframe 7):\n");
+ dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n",
+ hsotg->hfnum_7_samples_a, hsotg->hfnum_7_frrem_accum_a,
+ hsotg->hfnum_7_samples_a > 0 ?
+ hsotg->hfnum_7_frrem_accum_a / hsotg->hfnum_7_samples_a : 0);
+ dev_dbg(hsotg->dev, "Frame remaining at sample point A (uframe 0):\n");
+ dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n",
+ hsotg->hfnum_0_samples_a, hsotg->hfnum_0_frrem_accum_a,
+ hsotg->hfnum_0_samples_a > 0 ?
+ hsotg->hfnum_0_frrem_accum_a / hsotg->hfnum_0_samples_a : 0);
+ dev_dbg(hsotg->dev, "Frame remaining at sample point A (uframe 1-6):\n");
+ dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n",
+ hsotg->hfnum_other_samples_a, hsotg->hfnum_other_frrem_accum_a,
+ hsotg->hfnum_other_samples_a > 0 ?
+ hsotg->hfnum_other_frrem_accum_a / hsotg->hfnum_other_samples_a
+ : 0);
+ dev_dbg(hsotg->dev, "\n");
+ dev_dbg(hsotg->dev, "Frame remaining at sample point B (uframe 7):\n");
+ dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n",
+ hsotg->hfnum_7_samples_b, hsotg->hfnum_7_frrem_accum_b,
+ hsotg->hfnum_7_samples_b > 0 ?
+ hsotg->hfnum_7_frrem_accum_b / hsotg->hfnum_7_samples_b : 0);
+ dev_dbg(hsotg->dev, "Frame remaining at sample point B (uframe 0):\n");
+ dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n",
+ hsotg->hfnum_0_samples_b, hsotg->hfnum_0_frrem_accum_b,
+ (hsotg->hfnum_0_samples_b > 0) ?
+ hsotg->hfnum_0_frrem_accum_b / hsotg->hfnum_0_samples_b : 0);
+ dev_dbg(hsotg->dev, "Frame remaining at sample point B (uframe 1-6):\n");
+ dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n",
+ hsotg->hfnum_other_samples_b, hsotg->hfnum_other_frrem_accum_b,
+ (hsotg->hfnum_other_samples_b > 0) ?
+ hsotg->hfnum_other_frrem_accum_b / hsotg->hfnum_other_samples_b
+ : 0);
+#endif
+}
+
+struct wrapper_priv_data {
+ struct dwc2_hsotg *hsotg;
+};
+
+/* Gets the dwc2_hsotg from a usb_hcd */
+static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd)
+{
+ struct wrapper_priv_data *p;
+
+ p = (struct wrapper_priv_data *) &hcd->hcd_priv;
+ return p->hsotg;
+}
+
+static int _dwc2_hcd_start(struct usb_hcd *hcd);
+
+void dwc2_host_start(struct dwc2_hsotg *hsotg)
+{
+ struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
+
+ hcd->self.is_b_host = dwc2_hcd_is_b_host(hsotg);
+ _dwc2_hcd_start(hcd);
+}
+
+void dwc2_host_disconnect(struct dwc2_hsotg *hsotg)
+{
+ struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
+
+ hcd->self.is_b_host = 0;
+}
+
+void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context, int *hub_addr,
+ int *hub_port)
+{
+ struct urb *urb = context;
+
+ if (urb->dev->tt)
+ *hub_addr = urb->dev->tt->hub->devnum;
+ else
+ *hub_addr = 0;
+ *hub_port = urb->dev->ttport;
+}
+
+int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context)
+{
+ struct urb *urb = context;
+
+ return urb->dev->speed;
+}
+
+static void dwc2_allocate_bus_bandwidth(struct usb_hcd *hcd, u16 bw,
+ struct urb *urb)
+{
+ struct usb_bus *bus = hcd_to_bus(hcd);
+
+ if (urb->interval)
+ bus->bandwidth_allocated += bw / urb->interval;
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+ bus->bandwidth_isoc_reqs++;
+ else
+ bus->bandwidth_int_reqs++;
+}
+
+static void dwc2_free_bus_bandwidth(struct usb_hcd *hcd, u16 bw,
+ struct urb *urb)
+{
+ struct usb_bus *bus = hcd_to_bus(hcd);
+
+ if (urb->interval)
+ bus->bandwidth_allocated -= bw / urb->interval;
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+ bus->bandwidth_isoc_reqs--;
+ else
+ bus->bandwidth_int_reqs--;
+}
+
+/*
+ * Sets the final status of an URB and returns it to the upper layer. Any
+ * required cleanup of the URB is performed.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_host_complete(struct dwc2_hsotg *hsotg, void *context,
+ struct dwc2_hcd_urb *dwc2_urb, int status)
+{
+ struct urb *urb = context;
+ int i;
+
+ if (!urb) {
+ dev_dbg(hsotg->dev, "## %s: context is NULL ##\n", __func__);
+ return;
+ }
+
+ if (!dwc2_urb) {
+ dev_dbg(hsotg->dev, "## %s: dwc2_urb is NULL ##\n", __func__);
+ return;
+ }
+
+ urb->actual_length = dwc2_hcd_urb_get_actual_length(dwc2_urb);
+
+ dev_vdbg(hsotg->dev,
+ "%s: urb %p device %d ep %d-%s status %d actual %d\n",
+ __func__, urb, usb_pipedevice(urb->pipe),
+ usb_pipeendpoint(urb->pipe),
+ usb_pipein(urb->pipe) ? "IN" : "OUT", status,
+ urb->actual_length);
+
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ for (i = 0; i < urb->number_of_packets; i++)
+ dev_vdbg(hsotg->dev, " ISO Desc %d status %d\n",
+ i, urb->iso_frame_desc[i].status);
+ }
+
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ urb->error_count = dwc2_hcd_urb_get_error_count(dwc2_urb);
+ for (i = 0; i < urb->number_of_packets; ++i) {
+ urb->iso_frame_desc[i].actual_length =
+ dwc2_hcd_urb_get_iso_desc_actual_length(
+ dwc2_urb, i);
+ urb->iso_frame_desc[i].status =
+ dwc2_hcd_urb_get_iso_desc_status(dwc2_urb, i);
+ }
+ }
+
+ urb->status = status;
+ urb->hcpriv = NULL;
+ if (!status) {
+ if ((urb->transfer_flags & URB_SHORT_NOT_OK) &&
+ urb->actual_length < urb->transfer_buffer_length)
+ urb->status = -EREMOTEIO;
+ }
+
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS ||
+ usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
+ struct usb_host_endpoint *ep = urb->ep;
+
+ if (ep)
+ dwc2_free_bus_bandwidth(dwc2_hsotg_to_hcd(hsotg),
+ dwc2_hcd_get_ep_bandwidth(hsotg, ep),
+ urb);
+ }
+
+ kfree(dwc2_urb);
+
+ spin_unlock(&hsotg->lock);
+ usb_hcd_giveback_urb(dwc2_hsotg_to_hcd(hsotg), urb, status);
+ spin_lock(&hsotg->lock);
+}
+
+/*
+ * Work queue function for starting the HCD when A-Cable is connected
+ */
+static void dwc2_hcd_start_func(struct work_struct *work)
+{
+ struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
+ start_work.work);
+
+ dev_dbg(hsotg->dev, "%s() %p\n", __func__, hsotg);
+ dwc2_host_start(hsotg);
+}
+
+/*
+ * Reset work queue function
+ */
+static void dwc2_hcd_reset_func(struct work_struct *work)
+{
+ struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
+ reset_work.work);
+ u32 hprt0;
+
+ dev_dbg(hsotg->dev, "USB RESET function called\n");
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 &= ~HPRT0_RST;
+ writel(hprt0, hsotg->regs + HPRT0);
+ hsotg->flags.b.port_reset_change = 1;
+}
+
+/*
+ * =========================================================================
+ * Linux HC Driver Functions
+ * =========================================================================
+ */
+
+/*
+ * Initializes the DWC_otg controller and its root hub and prepares it for host
+ * mode operation. Activates the root port. Returns 0 on success and a negative
+ * error code on failure.
+ */
+static int _dwc2_hcd_start(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ struct usb_bus *bus = hcd_to_bus(hcd);
+ unsigned long flags;
+
+ dev_dbg(hsotg->dev, "DWC OTG HCD START\n");
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ hcd->state = HC_STATE_RUNNING;
+
+ if (dwc2_is_device_mode(hsotg)) {
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ return 0; /* why 0 ?? */
+ }
+
+ dwc2_hcd_reinit(hsotg);
+
+ /* Initialize and connect root hub if one is not already attached */
+ if (bus->root_hub) {
+ dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n");
+ /* Inform the HUB driver to resume */
+ usb_hcd_resume_root_hub(hcd);
+ }
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ return 0;
+}
+
+/*
+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
+ * stopped.
+ */
+static void _dwc2_hcd_stop(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ unsigned long flags;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ dwc2_hcd_stop(hsotg);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ usleep_range(1000, 3000);
+}
+
+/* Returns the current frame number */
+static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+ return dwc2_hcd_get_frame_number(hsotg);
+}
+
+static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb,
+ char *fn_name)
+{
+#ifdef VERBOSE_DEBUG
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ char *pipetype;
+ char *speed;
+
+ dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb);
+ dev_vdbg(hsotg->dev, " Device address: %d\n",
+ usb_pipedevice(urb->pipe));
+ dev_vdbg(hsotg->dev, " Endpoint: %d, %s\n",
+ usb_pipeendpoint(urb->pipe),
+ usb_pipein(urb->pipe) ? "IN" : "OUT");
+
+ switch (usb_pipetype(urb->pipe)) {
+ case PIPE_CONTROL:
+ pipetype = "CONTROL";
+ break;
+ case PIPE_BULK:
+ pipetype = "BULK";
+ break;
+ case PIPE_INTERRUPT:
+ pipetype = "INTERRUPT";
+ break;
+ case PIPE_ISOCHRONOUS:
+ pipetype = "ISOCHRONOUS";
+ break;
+ default:
+ pipetype = "UNKNOWN";
+ break;
+ }
+
+ dev_vdbg(hsotg->dev, " Endpoint type: %s %s (%s)\n", pipetype,
+ usb_urb_dir_in(urb) ? "IN" : "OUT", usb_pipein(urb->pipe) ?
+ "IN" : "OUT");
+
+ switch (urb->dev->speed) {
+ case USB_SPEED_HIGH:
+ speed = "HIGH";
+ break;
+ case USB_SPEED_FULL:
+ speed = "FULL";
+ break;
+ case USB_SPEED_LOW:
+ speed = "LOW";
+ break;
+ default:
+ speed = "UNKNOWN";
+ break;
+ }
+
+ dev_vdbg(hsotg->dev, " Speed: %s\n", speed);
+ dev_vdbg(hsotg->dev, " Max packet size: %d\n",
+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
+ dev_vdbg(hsotg->dev, " Data buffer length: %d\n",
+ urb->transfer_buffer_length);
+ dev_vdbg(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %p\n",
+ urb->transfer_buffer, (void *)urb->transfer_dma);
+ dev_vdbg(hsotg->dev, " Setup buffer: %p, Setup DMA: %p\n",
+ urb->setup_packet, (void *)urb->setup_dma);
+ dev_vdbg(hsotg->dev, " Interval: %d\n", urb->interval);
+
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ int i;
+
+ for (i = 0; i < urb->number_of_packets; i++) {
+ dev_vdbg(hsotg->dev, " ISO Desc %d:\n", i);
+ dev_vdbg(hsotg->dev, " offset: %d, length %d\n",
+ urb->iso_frame_desc[i].offset,
+ urb->iso_frame_desc[i].length);
+ }
+ }
+#endif
+}
+
+/*
+ * Starts processing a USB transfer request specified by a USB Request Block
+ * (URB). mem_flags indicates the type of memory allocation to use while
+ * processing this URB.
+ */
+static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ struct usb_host_endpoint *ep = urb->ep;
+ struct dwc2_hcd_urb *dwc2_urb;
+ int i;
+ int alloc_bandwidth = 0;
+ int retval = 0;
+ u8 ep_type = 0;
+ u32 tflags = 0;
+ void *buf;
+ unsigned long flags;
+
+ dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n");
+ dwc2_dump_urb_info(hcd, urb, "urb_enqueue");
+
+ if (ep == NULL)
+ return -EINVAL;
+
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS ||
+ usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
+ spin_lock_irqsave(&hsotg->lock, flags);
+ if (!dwc2_hcd_is_bandwidth_allocated(hsotg, ep))
+ alloc_bandwidth = 1;
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ }
+
+ switch (usb_pipetype(urb->pipe)) {
+ case PIPE_CONTROL:
+ ep_type = USB_ENDPOINT_XFER_CONTROL;
+ break;
+ case PIPE_ISOCHRONOUS:
+ ep_type = USB_ENDPOINT_XFER_ISOC;
+ break;
+ case PIPE_BULK:
+ ep_type = USB_ENDPOINT_XFER_BULK;
+ break;
+ case PIPE_INTERRUPT:
+ ep_type = USB_ENDPOINT_XFER_INT;
+ break;
+ default:
+ dev_warn(hsotg->dev, "Wrong ep type\n");
+ }
+
+ dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets,
+ mem_flags);
+ if (!dwc2_urb)
+ return -ENOMEM;
+
+ dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe),
+ usb_pipeendpoint(urb->pipe), ep_type,
+ usb_pipein(urb->pipe),
+ usb_maxpacket(urb->dev, urb->pipe,
+ !(usb_pipein(urb->pipe))));
+
+ buf = urb->transfer_buffer;
+ if (hcd->self.uses_dma) {
+ /*
+ * Calculate virtual address from physical address, because
+ * some class driver may not fill transfer_buffer.
+ * In Buffer DMA mode virtual address is used, when handling
+ * non-DWORD aligned buffers.
+ */
+ buf = bus_to_virt(urb->transfer_dma);
+ }
+
+ if (!(urb->transfer_flags & URB_NO_INTERRUPT))
+ tflags |= URB_GIVEBACK_ASAP;
+ if (urb->transfer_flags & URB_ZERO_PACKET)
+ tflags |= URB_SEND_ZERO_PACKET;
+
+ dwc2_urb->priv = urb;
+ dwc2_urb->buf = buf;
+ dwc2_urb->dma = urb->transfer_dma;
+ dwc2_urb->length = urb->transfer_buffer_length;
+ dwc2_urb->setup_packet = urb->setup_packet;
+ dwc2_urb->setup_dma = urb->setup_dma;
+ dwc2_urb->flags = tflags;
+ dwc2_urb->interval = urb->interval;
+ dwc2_urb->status = -EINPROGRESS;
+
+ for (i = 0; i < urb->number_of_packets; ++i)
+ dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i,
+ urb->iso_frame_desc[i].offset,
+ urb->iso_frame_desc[i].length);
+
+ urb->hcpriv = dwc2_urb;
+ retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, &ep->hcpriv,
+ mem_flags);
+ if (retval) {
+ urb->hcpriv = NULL;
+ kfree(dwc2_urb);
+ } else {
+ if (alloc_bandwidth) {
+ spin_lock_irqsave(&hsotg->lock, flags);
+ dwc2_allocate_bus_bandwidth(hcd,
+ dwc2_hcd_get_ep_bandwidth(hsotg, ep),
+ urb);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ }
+ }
+
+ return retval;
+}
+
+/*
+ * Aborts/cancels a USB transfer request. Always returns 0 to indicate success.
+ */
+static int _dwc2_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+ int status)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ int rc = 0;
+ unsigned long flags;
+
+ dev_dbg(hsotg->dev, "DWC OTG HCD URB Dequeue\n");
+ dwc2_dump_urb_info(hcd, urb, "urb_dequeue");
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ if (!urb->hcpriv) {
+ dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n");
+ goto out;
+ }
+
+ rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv);
+
+ kfree(urb->hcpriv);
+ urb->hcpriv = NULL;
+
+ /* Higher layer software sets URB status */
+ spin_unlock(&hsotg->lock);
+ usb_hcd_giveback_urb(hcd, urb, status);
+ spin_lock(&hsotg->lock);
+
+ dev_dbg(hsotg->dev, "Called usb_hcd_giveback_urb()\n");
+ dev_dbg(hsotg->dev, " urb->status = %d\n", urb->status);
+out:
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ return rc;
+}
+
+/*
+ * Frees resources in the DWC_otg controller related to a given endpoint. Also
+ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
+ * must already be dequeued.
+ */
+static void _dwc2_hcd_endpoint_disable(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+ dev_dbg(hsotg->dev,
+ "DWC OTG HCD EP DISABLE: bEndpointAddress=0x%02x, ep->hcpriv=%p\n",
+ ep->desc.bEndpointAddress, ep->hcpriv);
+ dwc2_hcd_endpoint_disable(hsotg, ep, 250);
+}
+
+/*
+ * Resets endpoint specific parameter values, in current version used to reset
+ * the data toggle (as a WA). This function can be called from usb_clear_halt
+ * routine.
+ */
+static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ int is_control = usb_endpoint_xfer_control(&ep->desc);
+ int is_out = usb_endpoint_dir_out(&ep->desc);
+ int epnum = usb_endpoint_num(&ep->desc);
+ struct usb_device *udev;
+ unsigned long flags;
+
+ dev_dbg(hsotg->dev,
+ "DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n",
+ ep->desc.bEndpointAddress);
+
+ udev = to_usb_device(hsotg->dev);
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ usb_settoggle(udev, epnum, is_out, 0);
+ if (is_control)
+ usb_settoggle(udev, epnum, !is_out, 0);
+ dwc2_hcd_endpoint_reset(hsotg, ep);
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+/*
+ * Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
+ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
+ * interrupt.
+ *
+ * This function is called by the USB core when an interrupt occurs
+ */
+static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ int retval = dwc2_hcd_intr(hsotg);
+
+ return IRQ_RETVAL(retval);
+}
+
+/*
+ * Creates Status Change bitmap for the root hub and root port. The bitmap is
+ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
+ * is the status change indicator for the single root port. Returns 1 if either
+ * change indicator is 1, otherwise returns 0.
+ */
+static int _dwc2_hcd_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+
+ buf[0] = dwc2_hcd_is_status_changed(hsotg, 1) << 1;
+ return buf[0] != 0;
+}
+
+/* Handles hub class-specific requests */
+static int _dwc2_hcd_hub_control(struct usb_hcd *hcd, u16 typereq, u16 wvalue,
+ u16 windex, char *buf, u16 wlength)
+{
+ int retval = dwc2_hcd_hub_control(dwc2_hcd_to_hsotg(hcd), typereq,
+ wvalue, windex, buf, wlength);
+ return retval;
+}
+
+/* Handles hub TT buffer clear completions */
+static void _dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ struct dwc2_qh *qh;
+ unsigned long flags;
+
+ qh = ep->hcpriv;
+ if (!qh)
+ return;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ qh->tt_buffer_dirty = 0;
+
+ if (hsotg->flags.b.port_connect_status)
+ dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_ALL);
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+static struct hc_driver dwc2_hc_driver = {
+ .description = "dwc2_hsotg",
+ .product_desc = "DWC OTG Controller",
+ .hcd_priv_size = sizeof(struct wrapper_priv_data),
+
+ .irq = _dwc2_hcd_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ .start = _dwc2_hcd_start,
+ .stop = _dwc2_hcd_stop,
+ .urb_enqueue = _dwc2_hcd_urb_enqueue,
+ .urb_dequeue = _dwc2_hcd_urb_dequeue,
+ .endpoint_disable = _dwc2_hcd_endpoint_disable,
+ .endpoint_reset = _dwc2_hcd_endpoint_reset,
+ .get_frame_number = _dwc2_hcd_get_frame_number,
+
+ .hub_status_data = _dwc2_hcd_hub_status_data,
+ .hub_control = _dwc2_hcd_hub_control,
+ .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete,
+};
+
+/*
+ * Frees secondary storage associated with the dwc2_hsotg structure contained
+ * in the struct usb_hcd field
+ */
+static void dwc2_hcd_free(struct dwc2_hsotg *hsotg)
+{
+ u32 ahbcfg;
+ u32 dctl;
+ int i;
+
+ dev_dbg(hsotg->dev, "DWC OTG HCD FREE\n");
+
+ /* Free memory for QH/QTD lists */
+ dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive);
+ dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active);
+ dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive);
+ dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready);
+ dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_assigned);
+ dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_queued);
+
+ /* Free memory for the host channels */
+ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
+ struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i];
+
+ if (chan != NULL) {
+ dev_dbg(hsotg->dev, "HCD Free channel #%i, chan=%p\n",
+ i, chan);
+ hsotg->hc_ptr_array[i] = NULL;
+ kfree(chan);
+ }
+ }
+
+ if (hsotg->core_params->dma_enable > 0) {
+ if (hsotg->status_buf) {
+ dma_free_coherent(hsotg->dev, DWC2_HCD_STATUS_BUF_SIZE,
+ hsotg->status_buf,
+ hsotg->status_buf_dma);
+ hsotg->status_buf = NULL;
+ }
+ } else {
+ kfree(hsotg->status_buf);
+ hsotg->status_buf = NULL;
+ }
+
+ ahbcfg = readl(hsotg->regs + GAHBCFG);
+
+ /* Disable all interrupts */
+ ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
+ writel(ahbcfg, hsotg->regs + GAHBCFG);
+ writel(0, hsotg->regs + GINTMSK);
+
+ if (hsotg->snpsid >= DWC2_CORE_REV_3_00a) {
+ dctl = readl(hsotg->regs + DCTL);
+ dctl |= DCTL_SFTDISCON;
+ writel(dctl, hsotg->regs + DCTL);
+ }
+
+ if (hsotg->wq_otg) {
+ if (!cancel_work_sync(&hsotg->wf_otg))
+ flush_workqueue(hsotg->wq_otg);
+ destroy_workqueue(hsotg->wq_otg);
+ }
+
+ kfree(hsotg->core_params);
+ hsotg->core_params = NULL;
+ del_timer(&hsotg->wkp_timer);
+}
+
+static void dwc2_hcd_release(struct dwc2_hsotg *hsotg)
+{
+ /* Turn off all host-specific interrupts */
+ dwc2_disable_host_interrupts(hsotg);
+
+ dwc2_hcd_free(hsotg);
+}
+
+static void dwc2_set_uninitialized(int *p, int size)
+{
+ int i;
+
+ for (i = 0; i < size; i++)
+ p[i] = -1;
+}
+
+/*
+ * Initializes the HCD. This function allocates memory for and initializes the
+ * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the
+ * USB bus with the core and calls the hc_driver->start() function. It returns
+ * a negative error on failure.
+ */
+int dwc2_hcd_init(struct device *dev, struct dwc2_hsotg *hsotg, int irq,
+ struct dwc2_core_params *params)
+{
+ struct usb_hcd *hcd;
+ struct dwc2_host_chan *channel;
+ u32 snpsid, gusbcfg, hcfg;
+ int i, num_channels;
+ int retval = -ENOMEM;
+
+ dev_dbg(dev, "DWC OTG HCD INIT\n");
+
+ /*
+ * Attempt to ensure this device is really a DWC_otg Controller.
+ * Read and verify the GSNPSID register contents. The value should be
+ * 0x45f42xxx or 0x45f43xxx, which corresponds to either "OT2" or "OT3",
+ * as in "OTG version 2.xx" or "OTG version 3.xx".
+ */
+ snpsid = readl(hsotg->regs + GSNPSID);
+ if ((snpsid & 0xfffff000) != 0x4f542000 &&
+ (snpsid & 0xfffff000) != 0x4f543000) {
+ dev_err(dev, "Bad value for GSNPSID: 0x%08x\n", snpsid);
+ retval = -ENODEV;
+ goto error1;
+ }
+
+ hcd = usb_create_hcd(&dwc2_hc_driver, dev, dev_name(dev));
+ if (!hcd)
+ goto error1;
+
+ hcd->has_tt = 1;
+
+ spin_lock_init(&hsotg->lock);
+ ((struct wrapper_priv_data *) &hcd->hcd_priv)->hsotg = hsotg;
+ hsotg->priv = hcd;
+ hsotg->dev = dev;
+
+ /*
+ * Store the contents of the hardware configuration registers here for
+ * easy access later
+ */
+ hsotg->hwcfg1 = readl(hsotg->regs + GHWCFG1);
+ hsotg->hwcfg2 = readl(hsotg->regs + GHWCFG2);
+ hsotg->hwcfg3 = readl(hsotg->regs + GHWCFG3);
+ hsotg->hwcfg4 = readl(hsotg->regs + GHWCFG4);
+
+ dev_dbg(hsotg->dev, "hwcfg1=%08x\n", hsotg->hwcfg1);
+ dev_dbg(hsotg->dev, "hwcfg2=%08x\n", hsotg->hwcfg2);
+ dev_dbg(hsotg->dev, "hwcfg3=%08x\n", hsotg->hwcfg3);
+ dev_dbg(hsotg->dev, "hwcfg4=%08x\n", hsotg->hwcfg4);
+
+ /* Force host mode to get HPTXFSIZ exact power on value */
+ gusbcfg = readl(hsotg->regs + GUSBCFG);
+ gusbcfg |= GUSBCFG_FORCEHOSTMODE;
+ writel(gusbcfg, hsotg->regs + GUSBCFG);
+ usleep_range(100000, 150000);
+
+ hsotg->hptxfsiz = readl(hsotg->regs + HPTXFSIZ);
+ dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hsotg->hptxfsiz);
+ gusbcfg = readl(hsotg->regs + GUSBCFG);
+ gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
+ writel(gusbcfg, hsotg->regs + GUSBCFG);
+ usleep_range(100000, 150000);
+
+ hcfg = readl(hsotg->regs + HCFG);
+ dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg);
+ dev_dbg(hsotg->dev, "op_mode=%0x\n",
+ hsotg->hwcfg2 >> GHWCFG2_OP_MODE_SHIFT &
+ GHWCFG2_OP_MODE_MASK >> GHWCFG2_OP_MODE_SHIFT);
+ dev_dbg(hsotg->dev, "arch=%0x\n",
+ hsotg->hwcfg2 >> GHWCFG2_ARCHITECTURE_SHIFT &
+ GHWCFG2_ARCHITECTURE_MASK >> GHWCFG2_ARCHITECTURE_SHIFT);
+ dev_dbg(hsotg->dev, "num_dev_ep=%d\n",
+ hsotg->hwcfg2 >> GHWCFG2_NUM_DEV_EP_SHIFT &
+ GHWCFG2_NUM_DEV_EP_MASK >> GHWCFG2_NUM_DEV_EP_SHIFT);
+ dev_dbg(hsotg->dev, "max_host_chan=%d\n",
+ hsotg->hwcfg2 >> GHWCFG2_NUM_HOST_CHAN_SHIFT &
+ GHWCFG2_NUM_HOST_CHAN_MASK >> GHWCFG2_NUM_HOST_CHAN_SHIFT);
+ dev_dbg(hsotg->dev, "nonperio_tx_q_depth=0x%0x\n",
+ hsotg->hwcfg2 >> GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT &
+ GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK >>
+ GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT);
+ dev_dbg(hsotg->dev, "host_perio_tx_q_depth=0x%0x\n",
+ hsotg->hwcfg2 >> GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT &
+ GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK >>
+ GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT);
+ dev_dbg(hsotg->dev, "dev_token_q_depth=0x%0x\n",
+ hsotg->hwcfg2 >> GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT &
+ GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK >>
+ GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT);
+
+#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
+ hsotg->frame_num_array = kzalloc(sizeof(*hsotg->frame_num_array) *
+ FRAME_NUM_ARRAY_SIZE, GFP_KERNEL);
+ if (!hsotg->frame_num_array)
+ goto error2;
+ hsotg->last_frame_num_array = kzalloc(
+ sizeof(*hsotg->last_frame_num_array) *
+ FRAME_NUM_ARRAY_SIZE, GFP_KERNEL);
+ if (!hsotg->last_frame_num_array)
+ goto error2;
+ hsotg->last_frame_num = HFNUM_MAX_FRNUM;
+#endif
+
+ hsotg->core_params = kzalloc(sizeof(*hsotg->core_params), GFP_KERNEL);
+ if (!hsotg->core_params)
+ goto error2;
+
+ dwc2_set_uninitialized((int *)hsotg->core_params,
+ sizeof(*hsotg->core_params) / sizeof(int));
+
+ /* Validate parameter values */
+ dwc2_set_parameters(hsotg, params);
+
+ /* Initialize the DWC_otg core, and select the Phy type */
+ retval = dwc2_core_init(hsotg, true);
+ if (retval)
+ goto error2;
+
+ /*
+ * Disable the global interrupt until all the interrupt handlers are
+ * installed
+ */
+ dwc2_disable_global_interrupts(hsotg);
+
+ /* Create new workqueue and init work */
+ hsotg->wq_otg = create_singlethread_workqueue("dwc_otg");
+ if (!hsotg->wq_otg) {
+ dev_err(hsotg->dev, "Failed to create workqueue\n");
+ goto error2;
+ }
+ INIT_WORK(&hsotg->wf_otg, dwc2_conn_id_status_change);
+
+ hsotg->snpsid = readl(hsotg->regs + GSNPSID);
+ dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x\n",
+ hsotg->snpsid >> 12 & 0xf, hsotg->snpsid >> 8 & 0xf,
+ hsotg->snpsid >> 4 & 0xf, hsotg->snpsid & 0xf);
+
+ setup_timer(&hsotg->wkp_timer, dwc2_wakeup_detected,
+ (unsigned long)hsotg);
+
+ /* Initialize the non-periodic schedule */
+ INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive);
+ INIT_LIST_HEAD(&hsotg->non_periodic_sched_active);
+
+ /* Initialize the periodic schedule */
+ INIT_LIST_HEAD(&hsotg->periodic_sched_inactive);
+ INIT_LIST_HEAD(&hsotg->periodic_sched_ready);
+ INIT_LIST_HEAD(&hsotg->periodic_sched_assigned);
+ INIT_LIST_HEAD(&hsotg->periodic_sched_queued);
+
+ /*
+ * Create a host channel descriptor for each host channel implemented
+ * in the controller. Initialize the channel descriptor array.
+ */
+ INIT_LIST_HEAD(&hsotg->free_hc_list);
+ num_channels = hsotg->core_params->host_channels;
+ memset(&hsotg->hc_ptr_array[0], 0, sizeof(hsotg->hc_ptr_array));
+
+ for (i = 0; i < num_channels; i++) {
+ channel = kzalloc(sizeof(*channel), GFP_KERNEL);
+ if (channel == NULL)
+ goto error3;
+ channel->hc_num = i;
+ hsotg->hc_ptr_array[i] = channel;
+ }
+
+ /* Initialize hsotg start work */
+ INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func);
+
+ /* Initialize port reset work */
+ INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func);
+
+ /*
+ * Allocate space for storing data on status transactions. Normally no
+ * data is sent, but this space acts as a bit bucket. This must be
+ * done after usb_add_hcd since that function allocates the DMA buffer
+ * pool.
+ */
+ if (hsotg->core_params->dma_enable > 0)
+ hsotg->status_buf = dma_alloc_coherent(hsotg->dev,
+ DWC2_HCD_STATUS_BUF_SIZE,
+ &hsotg->status_buf_dma, GFP_KERNEL);
+ else
+ hsotg->status_buf = kzalloc(DWC2_HCD_STATUS_BUF_SIZE,
+ GFP_KERNEL);
+
+ if (!hsotg->status_buf)
+ goto error3;
+
+ hsotg->otg_port = 1;
+ hsotg->frame_list = NULL;
+ hsotg->frame_list_dma = 0;
+ hsotg->periodic_qh_count = 0;
+
+ /* Initiate lx_state to L3 disconnected state */
+ hsotg->lx_state = DWC2_L3;
+
+ hcd->self.otg_port = hsotg->otg_port;
+
+ /* Don't support SG list at this point */
+ hcd->self.sg_tablesize = 0;
+
+ /*
+ * Finish generic HCD initialization and start the HCD. This function
+ * allocates the DMA buffer pool, registers the USB bus, requests the
+ * IRQ line, and calls hcd_start method.
+ */
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+ if (retval < 0)
+ goto error3;
+
+ dwc2_dump_global_registers(hsotg);
+ dwc2_dump_host_registers(hsotg);
+ dwc2_hcd_dump_state(hsotg);
+
+ dwc2_enable_global_interrupts(hsotg);
+
+ return 0;
+
+error3:
+ dwc2_hcd_release(hsotg);
+error2:
+ kfree(hsotg->core_params);
+
+#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
+ kfree(hsotg->last_frame_num_array);
+ kfree(hsotg->frame_num_array);
+#endif
+
+ usb_put_hcd(hcd);
+error1:
+ dev_err(dev, "%s() FAILED, returning %d\n", __func__, retval);
+ return retval;
+}
+EXPORT_SYMBOL_GPL(dwc2_hcd_init);
+
+/*
+ * Removes the HCD.
+ * Frees memory and resources associated with the HCD and deregisters the bus.
+ */
+void dwc2_hcd_remove(struct device *dev, struct dwc2_hsotg *hsotg)
+{
+ struct usb_hcd *hcd;
+
+ dev_dbg(dev, "DWC OTG HCD REMOVE\n");
+
+ hcd = dwc2_hsotg_to_hcd(hsotg);
+ dev_dbg(dev, "hsotg->hcd = %p\n", hcd);
+
+ if (!hcd) {
+ dev_dbg(dev, "%s: dwc2_hsotg_to_hcd(hsotg) NULL!\n",
+ __func__);
+ return;
+ }
+
+ usb_remove_hcd(hcd);
+ hsotg->priv = NULL;
+ dwc2_hcd_release(hsotg);
+ kfree(hsotg->core_params);
+
+#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
+ kfree(hsotg->last_frame_num_array);
+ kfree(hsotg->frame_num_array);
+#endif
+
+ usb_put_hcd(hcd);
+}
+EXPORT_SYMBOL_GPL(dwc2_hcd_remove);
--- /dev/null
+/*
+ * hcd.h - DesignWare HS OTG Controller host-mode declarations
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef __DWC2_HCD_H__
+#define __DWC2_HCD_H__
+
+/*
+ * This file contains the structures, constants, and interfaces for the
+ * Host Contoller Driver (HCD)
+ *
+ * The Host Controller Driver (HCD) is responsible for translating requests
+ * from the USB Driver into the appropriate actions on the DWC_otg controller.
+ * It isolates the USBD from the specifics of the controller by providing an
+ * API to the USBD.
+ */
+
+struct dwc2_qh;
+
+/**
+ * struct dwc2_host_chan - Software host channel descriptor
+ *
+ * @hc_num: Host channel number, used for register address lookup
+ * @dev_addr: Address of the device
+ * @ep_num: Endpoint of the device
+ * @ep_is_in: Endpoint direction
+ * @speed: Device speed. One of the following values:
+ * - USB_SPEED_LOW
+ * - USB_SPEED_FULL
+ * - USB_SPEED_HIGH
+ * @ep_type: Endpoint type. One of the following values:
+ * - USB_ENDPOINT_XFER_CONTROL: 0
+ * - USB_ENDPOINT_XFER_ISOC: 1
+ * - USB_ENDPOINT_XFER_BULK: 2
+ * - USB_ENDPOINT_XFER_INTR: 3
+ * @max_packet: Max packet size in bytes
+ * @data_pid_start: PID for initial transaction.
+ * 0: DATA0
+ * 1: DATA2
+ * 2: DATA1
+ * 3: MDATA (non-Control EP),
+ * SETUP (Control EP)
+ * @multi_count: Number of additional periodic transactions per
+ * (micro)frame
+ * @xfer_buf: Pointer to current transfer buffer position
+ * @xfer_dma: DMA address of xfer_buf
+ * @align_buf: In Buffer DMA mode this will be used if xfer_buf is not
+ * DWORD aligned
+ * @xfer_len: Total number of bytes to transfer
+ * @xfer_count: Number of bytes transferred so far
+ * @start_pkt_count: Packet count at start of transfer
+ * @xfer_started: True if the transfer has been started
+ * @ping: True if a PING request should be issued on this channel
+ * @error_state: True if the error count for this transaction is non-zero
+ * @halt_on_queue: True if this channel should be halted the next time a
+ * request is queued for the channel. This is necessary in
+ * slave mode if no request queue space is available when
+ * an attempt is made to halt the channel.
+ * @halt_pending: True if the host channel has been halted, but the core
+ * is not finished flushing queued requests
+ * @do_split: Enable split for the channel
+ * @complete_split: Enable complete split
+ * @hub_addr: Address of high speed hub for the split
+ * @hub_port: Port of the low/full speed device for the split
+ * @xact_pos: Split transaction position. One of the following values:
+ * - DWC2_HCSPLT_XACTPOS_MID
+ * - DWC2_HCSPLT_XACTPOS_BEGIN
+ * - DWC2_HCSPLT_XACTPOS_END
+ * - DWC2_HCSPLT_XACTPOS_ALL
+ * @requests: Number of requests issued for this channel since it was
+ * assigned to the current transfer (not counting PINGs)
+ * @schinfo: Scheduling micro-frame bitmap
+ * @ntd: Number of transfer descriptors for the transfer
+ * @halt_status: Reason for halting the host channel
+ * @hcint Contents of the HCINT register when the interrupt came
+ * @qh: QH for the transfer being processed by this channel
+ * @hc_list_entry: For linking to list of host channels
+ * @desc_list_addr: Current QH's descriptor list DMA address
+ *
+ * This structure represents the state of a single host channel when acting in
+ * host mode. It contains the data items needed to transfer packets to an
+ * endpoint via a host channel.
+ */
+struct dwc2_host_chan {
+ u8 hc_num;
+
+ unsigned dev_addr:7;
+ unsigned ep_num:4;
+ unsigned ep_is_in:1;
+ unsigned speed:4;
+ unsigned ep_type:2;
+ unsigned max_packet:11;
+ unsigned data_pid_start:2;
+#define DWC2_HC_PID_DATA0 (TSIZ_SC_MC_PID_DATA0 >> TSIZ_SC_MC_PID_SHIFT)
+#define DWC2_HC_PID_DATA2 (TSIZ_SC_MC_PID_DATA2 >> TSIZ_SC_MC_PID_SHIFT)
+#define DWC2_HC_PID_DATA1 (TSIZ_SC_MC_PID_DATA1 >> TSIZ_SC_MC_PID_SHIFT)
+#define DWC2_HC_PID_MDATA (TSIZ_SC_MC_PID_MDATA >> TSIZ_SC_MC_PID_SHIFT)
+#define DWC2_HC_PID_SETUP (TSIZ_SC_MC_PID_SETUP >> TSIZ_SC_MC_PID_SHIFT)
+
+ unsigned multi_count:2;
+
+ u8 *xfer_buf;
+ dma_addr_t xfer_dma;
+ dma_addr_t align_buf;
+ u32 xfer_len;
+ u32 xfer_count;
+ u16 start_pkt_count;
+ u8 xfer_started;
+ u8 do_ping;
+ u8 error_state;
+ u8 halt_on_queue;
+ u8 halt_pending;
+ u8 do_split;
+ u8 complete_split;
+ u8 hub_addr;
+ u8 hub_port;
+ u8 xact_pos;
+#define DWC2_HCSPLT_XACTPOS_MID (HCSPLT_XACTPOS_MID >> HCSPLT_XACTPOS_SHIFT)
+#define DWC2_HCSPLT_XACTPOS_END (HCSPLT_XACTPOS_END >> HCSPLT_XACTPOS_SHIFT)
+#define DWC2_HCSPLT_XACTPOS_BEGIN (HCSPLT_XACTPOS_BEGIN >> HCSPLT_XACTPOS_SHIFT)
+#define DWC2_HCSPLT_XACTPOS_ALL (HCSPLT_XACTPOS_ALL >> HCSPLT_XACTPOS_SHIFT)
+
+ u8 requests;
+ u8 schinfo;
+ u16 ntd;
+ enum dwc2_halt_status halt_status;
+ u32 hcint;
+ struct dwc2_qh *qh;
+ struct list_head hc_list_entry;
+ dma_addr_t desc_list_addr;
+};
+
+struct dwc2_hcd_pipe_info {
+ u8 dev_addr;
+ u8 ep_num;
+ u8 pipe_type;
+ u8 pipe_dir;
+ u16 mps;
+};
+
+struct dwc2_hcd_iso_packet_desc {
+ u32 offset;
+ u32 length;
+ u32 actual_length;
+ u32 status;
+};
+
+struct dwc2_qtd;
+
+struct dwc2_hcd_urb {
+ void *priv;
+ struct dwc2_qtd *qtd;
+ void *buf;
+ dma_addr_t dma;
+ void *setup_packet;
+ dma_addr_t setup_dma;
+ u32 length;
+ u32 actual_length;
+ u32 status;
+ u32 error_count;
+ u32 packet_count;
+ u32 flags;
+ u16 interval;
+ struct dwc2_hcd_pipe_info pipe_info;
+ struct dwc2_hcd_iso_packet_desc iso_descs[0];
+};
+
+/* Phases for control transfers */
+enum dwc2_control_phase {
+ DWC2_CONTROL_SETUP,
+ DWC2_CONTROL_DATA,
+ DWC2_CONTROL_STATUS,
+};
+
+/* Transaction types */
+enum dwc2_transaction_type {
+ DWC2_TRANSACTION_NONE,
+ DWC2_TRANSACTION_PERIODIC,
+ DWC2_TRANSACTION_NON_PERIODIC,
+ DWC2_TRANSACTION_ALL,
+};
+
+/**
+ * struct dwc2_qh - Software queue head structure
+ *
+ * @ep_type: Endpoint type. One of the following values:
+ * - USB_ENDPOINT_XFER_CONTROL
+ * - USB_ENDPOINT_XFER_BULK
+ * - USB_ENDPOINT_XFER_INT
+ * - USB_ENDPOINT_XFER_ISOC
+ * @ep_is_in: Endpoint direction
+ * @maxp: Value from wMaxPacketSize field of Endpoint Descriptor
+ * @dev_speed: Device speed. One of the following values:
+ * - USB_SPEED_LOW
+ * - USB_SPEED_FULL
+ * - USB_SPEED_HIGH
+ * @data_toggle: Determines the PID of the next data packet for
+ * non-controltransfers. Ignored for control transfers.
+ * One of the following values:
+ * - DWC2_HC_PID_DATA0
+ * - DWC2_HC_PID_DATA1
+ * @ping_state: Ping state
+ * @do_split: Full/low speed endpoint on high-speed hub requires split
+ * @qtd_list: List of QTDs for this QH
+ * @channel: Host channel currently processing transfers for this QH
+ * @usecs: Bandwidth in microseconds per (micro)frame
+ * @interval: Interval between transfers in (micro)frames
+ * @sched_frame: (micro)frame to initialize a periodic transfer.
+ * The transfer executes in the following (micro)frame.
+ * @start_split_frame: (Micro)frame at which last start split was initialized
+ * @dw_align_buf: Used instead of original buffer if its physical address
+ * is not dword-aligned
+ * @dw_align_buf_dma: DMA address for align_buf
+ * @qh_list_entry: Entry for QH in either the periodic or non-periodic
+ * schedule
+ * @desc_list: List of transfer descriptors
+ * @desc_list_dma: Physical address of desc_list
+ * @n_bytes: Xfer Bytes array. Each element corresponds to a transfer
+ * descriptor and indicates original XferSize value for the
+ * descriptor
+ * @ntd: Actual number of transfer descriptors in a list
+ * @td_first: Index of first activated isochronous transfer descriptor
+ * @td_last: Index of last activated isochronous transfer descriptor
+ * @tt_buffer_dirty True if clear_tt_buffer_complete is pending
+ *
+ * A Queue Head (QH) holds the static characteristics of an endpoint and
+ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
+ * be entered in either the non-periodic or periodic schedule.
+ */
+struct dwc2_qh {
+ u8 ep_type;
+ u8 ep_is_in;
+ u16 maxp;
+ u8 dev_speed;
+ u8 data_toggle;
+ u8 ping_state;
+ u8 do_split;
+ struct list_head qtd_list;
+ struct dwc2_host_chan *channel;
+ u16 usecs;
+ u16 interval;
+ u16 sched_frame;
+ u16 start_split_frame;
+ u8 *dw_align_buf;
+ dma_addr_t dw_align_buf_dma;
+ struct list_head qh_list_entry;
+ struct dwc2_hcd_dma_desc *desc_list;
+ dma_addr_t desc_list_dma;
+ u32 *n_bytes;
+ u16 ntd;
+ u8 td_first;
+ u8 td_last;
+ unsigned tt_buffer_dirty:1;
+};
+
+/**
+ * struct dwc2_qtd - Software queue transfer descriptor (QTD)
+ *
+ * @control_phase: Current phase for control transfers (Setup, Data, or
+ * Status)
+ * @in_process: Indicates if this QTD is currently processed by HW
+ * @data_toggle: Determines the PID of the next data packet for the
+ * data phase of control transfers. Ignored for other
+ * transfer types. One of the following values:
+ * - DWC2_HC_PID_DATA0
+ * - DWC2_HC_PID_DATA1
+ * @complete_split: Keeps track of the current split type for FS/LS
+ * endpoints on a HS Hub
+ * @isoc_split_pos: Position of the ISOC split in full/low speed
+ * @isoc_frame_index: Index of the next frame descriptor for an isochronous
+ * transfer. A frame descriptor describes the buffer
+ * position and length of the data to be transferred in the
+ * next scheduled (micro)frame of an isochronous transfer.
+ * It also holds status for that transaction. The frame
+ * index starts at 0.
+ * @isoc_split_offset: Position of the ISOC split in the buffer for the
+ * current frame
+ * @ssplit_out_xfer_count: How many bytes transferred during SSPLIT OUT
+ * @error_count: Holds the number of bus errors that have occurred for
+ * a transaction within this transfer
+ * @n_desc: Number of DMA descriptors for this QTD
+ * @isoc_frame_index_last: Last activated frame (packet) index, used in
+ * descriptor DMA mode only
+ * @urb: URB for this transfer
+ * @qh: Queue head for this QTD
+ * @qtd_list_entry: For linking to the QH's list of QTDs
+ *
+ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
+ * interrupt, or isochronous transfer. A single QTD is created for each URB
+ * (of one of these types) submitted to the HCD. The transfer associated with
+ * a QTD may require one or multiple transactions.
+ *
+ * A QTD is linked to a Queue Head, which is entered in either the
+ * non-periodic or periodic schedule for execution. When a QTD is chosen for
+ * execution, some or all of its transactions may be executed. After
+ * execution, the state of the QTD is updated. The QTD may be retired if all
+ * its transactions are complete or if an error occurred. Otherwise, it
+ * remains in the schedule so more transactions can be executed later.
+ */
+struct dwc2_qtd {
+ enum dwc2_control_phase control_phase;
+ u8 in_process;
+ u8 data_toggle;
+ u8 complete_split;
+ u8 isoc_split_pos;
+ u16 isoc_frame_index;
+ u16 isoc_split_offset;
+ u32 ssplit_out_xfer_count;
+ u8 error_count;
+ u8 n_desc;
+ u16 isoc_frame_index_last;
+ struct dwc2_hcd_urb *urb;
+ struct dwc2_qh *qh;
+ struct list_head qtd_list_entry;
+};
+
+#ifdef DEBUG
+struct hc_xfer_info {
+ struct dwc2_hsotg *hsotg;
+ struct dwc2_host_chan *chan;
+};
+#endif
+
+/* Gets the struct usb_hcd that contains a struct dwc2_hsotg */
+static inline struct usb_hcd *dwc2_hsotg_to_hcd(struct dwc2_hsotg *hsotg)
+{
+ return (struct usb_hcd *)hsotg->priv;
+}
+
+/*
+ * Inline used to disable one channel interrupt. Channel interrupts are
+ * disabled when the channel is halted or released by the interrupt handler.
+ * There is no need to handle further interrupts of that type until the
+ * channel is re-assigned. In fact, subsequent handling may cause crashes
+ * because the channel structures are cleaned up when the channel is released.
+ */
+static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr)
+{
+ u32 mask = readl(hsotg->regs + HCINTMSK(chnum));
+
+ mask &= ~intr;
+ writel(mask, hsotg->regs + HCINTMSK(chnum));
+}
+
+/*
+ * Returns the mode of operation, host or device
+ */
+static inline int dwc2_is_host_mode(struct dwc2_hsotg *hsotg)
+{
+ return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
+}
+static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
+{
+ return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
+}
+
+/*
+ * Reads HPRT0 in preparation to modify. It keeps the WC bits 0 so that if they
+ * are read as 1, they won't clear when written back.
+ */
+static inline u32 dwc2_read_hprt0(struct dwc2_hsotg *hsotg)
+{
+ u32 hprt0 = readl(hsotg->regs + HPRT0);
+
+ hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
+ return hprt0;
+}
+
+static inline u8 dwc2_hcd_get_ep_num(struct dwc2_hcd_pipe_info *pipe)
+{
+ return pipe->ep_num;
+}
+
+static inline u8 dwc2_hcd_get_pipe_type(struct dwc2_hcd_pipe_info *pipe)
+{
+ return pipe->pipe_type;
+}
+
+static inline u16 dwc2_hcd_get_mps(struct dwc2_hcd_pipe_info *pipe)
+{
+ return pipe->mps;
+}
+
+static inline u8 dwc2_hcd_get_dev_addr(struct dwc2_hcd_pipe_info *pipe)
+{
+ return pipe->dev_addr;
+}
+
+static inline u8 dwc2_hcd_is_pipe_isoc(struct dwc2_hcd_pipe_info *pipe)
+{
+ return pipe->pipe_type == USB_ENDPOINT_XFER_ISOC;
+}
+
+static inline u8 dwc2_hcd_is_pipe_int(struct dwc2_hcd_pipe_info *pipe)
+{
+ return pipe->pipe_type == USB_ENDPOINT_XFER_INT;
+}
+
+static inline u8 dwc2_hcd_is_pipe_bulk(struct dwc2_hcd_pipe_info *pipe)
+{
+ return pipe->pipe_type == USB_ENDPOINT_XFER_BULK;
+}
+
+static inline u8 dwc2_hcd_is_pipe_control(struct dwc2_hcd_pipe_info *pipe)
+{
+ return pipe->pipe_type == USB_ENDPOINT_XFER_CONTROL;
+}
+
+static inline u8 dwc2_hcd_is_pipe_in(struct dwc2_hcd_pipe_info *pipe)
+{
+ return pipe->pipe_dir == USB_DIR_IN;
+}
+
+static inline u8 dwc2_hcd_is_pipe_out(struct dwc2_hcd_pipe_info *pipe)
+{
+ return !dwc2_hcd_is_pipe_in(pipe);
+}
+
+extern int dwc2_hcd_init(struct device *dev, struct dwc2_hsotg *hsotg,
+ int irq, struct dwc2_core_params *params);
+extern void dwc2_hcd_remove(struct device *dev, struct dwc2_hsotg *hsotg);
+extern int dwc2_set_parameters(struct dwc2_hsotg *hsotg,
+ struct dwc2_core_params *params);
+
+/* Transaction Execution Functions */
+extern enum dwc2_transaction_type dwc2_hcd_select_transactions(
+ struct dwc2_hsotg *hsotg);
+extern void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg,
+ enum dwc2_transaction_type tr_type);
+
+/* Schedule Queue Functions */
+/* Implemented in hcd_queue.c */
+extern void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
+extern int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
+extern void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
+extern void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+ int sched_csplit);
+
+extern void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb);
+extern int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
+ struct dwc2_qh **qh, gfp_t mem_flags);
+
+/* Unlinks and frees a QTD */
+static inline void dwc2_hcd_qtd_unlink_and_free(struct dwc2_hsotg *hsotg,
+ struct dwc2_qtd *qtd,
+ struct dwc2_qh *qh)
+{
+ list_del(&qtd->qtd_list_entry);
+ kfree(qtd);
+}
+
+/* Descriptor DMA support functions */
+extern void dwc2_hcd_start_xfer_ddma(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh);
+extern void dwc2_hcd_complete_xfer_ddma(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ enum dwc2_halt_status halt_status);
+
+extern int dwc2_hcd_qh_init_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+ gfp_t mem_flags);
+extern void dwc2_hcd_qh_free_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
+
+/* Check if QH is non-periodic */
+#define dwc2_qh_is_non_per(_qh_ptr_) \
+ ((_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_BULK || \
+ (_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_CONTROL)
+
+/* High bandwidth multiplier as encoded in highspeed endpoint descriptors */
+#define dwc2_hb_mult(wmaxpacketsize) (1 + (((wmaxpacketsize) >> 11) & 0x03))
+
+/* Packet size for any kind of endpoint descriptor */
+#define dwc2_max_packet(wmaxpacketsize) ((wmaxpacketsize) & 0x07ff)
+
+/*
+ * Returns true if frame1 is less than or equal to frame2. The comparison is
+ * done modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the
+ * frame number when the max frame number is reached.
+ */
+static inline int dwc2_frame_num_le(u16 frame1, u16 frame2)
+{
+ return ((frame2 - frame1) & HFNUM_MAX_FRNUM) <= (HFNUM_MAX_FRNUM >> 1);
+}
+
+/*
+ * Returns true if frame1 is greater than frame2. The comparison is done
+ * modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
+ * number when the max frame number is reached.
+ */
+static inline int dwc2_frame_num_gt(u16 frame1, u16 frame2)
+{
+ return (frame1 != frame2) &&
+ ((frame1 - frame2) & HFNUM_MAX_FRNUM) < (HFNUM_MAX_FRNUM >> 1);
+}
+
+/*
+ * Increments frame by the amount specified by inc. The addition is done
+ * modulo HFNUM_MAX_FRNUM. Returns the incremented value.
+ */
+static inline u16 dwc2_frame_num_inc(u16 frame, u16 inc)
+{
+ return (frame + inc) & HFNUM_MAX_FRNUM;
+}
+
+static inline u16 dwc2_full_frame_num(u16 frame)
+{
+ return (frame & HFNUM_MAX_FRNUM) >> 3;
+}
+
+static inline u16 dwc2_micro_frame_num(u16 frame)
+{
+ return frame & 0x7;
+}
+
+/*
+ * Returns the Core Interrupt Status register contents, ANDed with the Core
+ * Interrupt Mask register contents
+ */
+static inline u32 dwc2_read_core_intr(struct dwc2_hsotg *hsotg)
+{
+ return readl(hsotg->regs + GINTSTS) & readl(hsotg->regs + GINTMSK);
+}
+
+static inline u32 dwc2_hcd_urb_get_status(struct dwc2_hcd_urb *dwc2_urb)
+{
+ return dwc2_urb->status;
+}
+
+static inline u32 dwc2_hcd_urb_get_actual_length(
+ struct dwc2_hcd_urb *dwc2_urb)
+{
+ return dwc2_urb->actual_length;
+}
+
+static inline u32 dwc2_hcd_urb_get_error_count(struct dwc2_hcd_urb *dwc2_urb)
+{
+ return dwc2_urb->error_count;
+}
+
+static inline void dwc2_hcd_urb_set_iso_desc_params(
+ struct dwc2_hcd_urb *dwc2_urb, int desc_num, u32 offset,
+ u32 length)
+{
+ dwc2_urb->iso_descs[desc_num].offset = offset;
+ dwc2_urb->iso_descs[desc_num].length = length;
+}
+
+static inline u32 dwc2_hcd_urb_get_iso_desc_status(
+ struct dwc2_hcd_urb *dwc2_urb, int desc_num)
+{
+ return dwc2_urb->iso_descs[desc_num].status;
+}
+
+static inline u32 dwc2_hcd_urb_get_iso_desc_actual_length(
+ struct dwc2_hcd_urb *dwc2_urb, int desc_num)
+{
+ return dwc2_urb->iso_descs[desc_num].actual_length;
+}
+
+static inline int dwc2_hcd_is_bandwidth_allocated(struct dwc2_hsotg *hsotg,
+ struct usb_host_endpoint *ep)
+{
+ struct dwc2_qh *qh = ep->hcpriv;
+
+ if (qh && !list_empty(&qh->qh_list_entry))
+ return 1;
+
+ return 0;
+}
+
+static inline u16 dwc2_hcd_get_ep_bandwidth(struct dwc2_hsotg *hsotg,
+ struct usb_host_endpoint *ep)
+{
+ struct dwc2_qh *qh = ep->hcpriv;
+
+ if (!qh) {
+ WARN_ON(1);
+ return 0;
+ }
+
+ return qh->usecs;
+}
+
+extern void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd);
+
+/* HCD Core API */
+
+/**
+ * dwc2_hcd_intr() - Called on every hardware interrupt
+ *
+ * @hsotg: The DWC2 HCD
+ *
+ * Returns non zero if interrupt is handled
+ * Return 0 if interrupt is not handled
+ */
+extern int dwc2_hcd_intr(struct dwc2_hsotg *hsotg);
+
+/**
+ * dwc2_hcd_stop() - Halts the DWC_otg host mode operation
+ *
+ * @hsotg: The DWC2 HCD
+ */
+extern void dwc2_hcd_stop(struct dwc2_hsotg *hsotg);
+
+extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg);
+extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg);
+
+/**
+ * dwc2_hcd_is_b_host() - Returns 1 if core currently is acting as B host,
+ * and 0 otherwise
+ *
+ * @hsotg: The DWC2 HCD
+ */
+extern int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg);
+
+/**
+ * dwc2_hcd_get_frame_number() - Returns current frame number
+ *
+ * @hsotg: The DWC2 HCD
+ */
+extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg);
+
+/**
+ * dwc2_hcd_dump_state() - Dumps hsotg state
+ *
+ * @hsotg: The DWC2 HCD
+ *
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+extern void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg);
+
+/**
+ * dwc2_hcd_dump_frrem() - Dumps the average frame remaining at SOF
+ *
+ * @hsotg: The DWC2 HCD
+ *
+ * This can be used to determine average interrupt latency. Frame remaining is
+ * also shown for start transfer and two additional sample points.
+ *
+ * NOTE: This function will be removed once the peripheral controller code
+ * is integrated and the driver is stable
+ */
+extern void dwc2_hcd_dump_frrem(struct dwc2_hsotg *hsotg);
+
+/* URB interface */
+
+/* Transfer flags */
+#define URB_GIVEBACK_ASAP 0x1
+#define URB_SEND_ZERO_PACKET 0x2
+
+/* Host driver callbacks */
+
+extern void dwc2_host_start(struct dwc2_hsotg *hsotg);
+extern void dwc2_host_disconnect(struct dwc2_hsotg *hsotg);
+extern void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context,
+ int *hub_addr, int *hub_port);
+extern int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context);
+extern void dwc2_host_complete(struct dwc2_hsotg *hsotg, void *context,
+ struct dwc2_hcd_urb *dwc2_urb, int status);
+
+#ifdef DEBUG
+/*
+ * Macro to sample the remaining PHY clocks left in the current frame. This
+ * may be used during debugging to determine the average time it takes to
+ * execute sections of code. There are two possible sample points, "a" and
+ * "b", so the _letter_ argument must be one of these values.
+ *
+ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
+ * example, "cat /sys/devices/lm0/hcd_frrem".
+ */
+#define dwc2_sample_frrem(_hcd_, _qh_, _letter_) \
+do { \
+ struct hfnum_data _hfnum_; \
+ struct dwc2_qtd *_qtd_; \
+ \
+ _qtd_ = list_entry((_qh_)->qtd_list.next, struct dwc2_qtd, \
+ qtd_list_entry); \
+ if (usb_pipeint(_qtd_->urb->pipe) && \
+ (_qh_)->start_split_frame != 0 && !_qtd_->complete_split) { \
+ _hfnum_.d32 = readl((_hcd_)->regs + HFNUM); \
+ switch (_hfnum_.b.frnum & 0x7) { \
+ case 7: \
+ (_hcd_)->hfnum_7_samples_##_letter_++; \
+ (_hcd_)->hfnum_7_frrem_accum_##_letter_ += \
+ _hfnum_.b.frrem; \
+ break; \
+ case 0: \
+ (_hcd_)->hfnum_0_samples_##_letter_++; \
+ (_hcd_)->hfnum_0_frrem_accum_##_letter_ += \
+ _hfnum_.b.frrem; \
+ break; \
+ default: \
+ (_hcd_)->hfnum_other_samples_##_letter_++; \
+ (_hcd_)->hfnum_other_frrem_accum_##_letter_ += \
+ _hfnum_.b.frrem; \
+ break; \
+ } \
+ } \
+} while (0)
+#else
+#define dwc2_sample_frrem(_hcd_, _qh_, _letter_) do {} while (0)
+#endif
+
+#endif /* __DWC2_HCD_H__ */
--- /dev/null
+/*
+ * hcd_intr.c - DesignWare HS OTG Controller host-mode interrupt handling
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * This file contains the interrupt handlers for Host mode
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+/* This function is for debug only */
+static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg)
+{
+#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
+#warning Compiling code to track missed SOFs
+
+ u16 curr_frame_number = hsotg->frame_number;
+
+ if (hsotg->frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
+ if (((hsotg->last_frame_num + 1) & HFNUM_MAX_FRNUM) !=
+ curr_frame_number) {
+ hsotg->frame_num_array[hsotg->frame_num_idx] =
+ curr_frame_number;
+ hsotg->last_frame_num_array[hsotg->frame_num_idx] =
+ hsotg->last_frame_num;
+ hsotg->frame_num_idx++;
+ }
+ } else if (!hsotg->dumped_frame_num_array) {
+ int i;
+
+ dev_info(hsotg->dev, "Frame Last Frame\n");
+ dev_info(hsotg->dev, "----- ----------\n");
+ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
+ dev_info(hsotg->dev, "0x%04x 0x%04x\n",
+ hsotg->frame_num_array[i],
+ hsotg->last_frame_num_array[i]);
+ }
+ hsotg->dumped_frame_num_array = 1;
+ }
+ hsotg->last_frame_num = curr_frame_number;
+#endif
+}
+
+static void dwc2_hc_handle_tt_clear(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan,
+ struct dwc2_qtd *qtd)
+{
+ struct urb *usb_urb;
+
+ if (!chan->qh || !qtd->urb)
+ return;
+
+ usb_urb = qtd->urb->priv;
+ if (!usb_urb || !usb_urb->dev)
+ return;
+
+ if (chan->qh->dev_speed != USB_SPEED_HIGH &&
+ qtd->urb->status != -EPIPE && qtd->urb->status != -EREMOTEIO) {
+ chan->qh->tt_buffer_dirty = 1;
+ if (usb_hub_clear_tt_buffer(usb_urb))
+ /* Clear failed; let's hope things work anyway */
+ chan->qh->tt_buffer_dirty = 0;
+ }
+}
+
+/*
+ * Handles the start-of-frame interrupt in host mode. Non-periodic
+ * transactions may be queued to the DWC_otg controller for the current
+ * (micro)frame. Periodic transactions may be queued to the controller
+ * for the next (micro)frame.
+ */
+static void dwc2_sof_intr(struct dwc2_hsotg *hsotg)
+{
+ struct list_head *qh_entry;
+ struct dwc2_qh *qh;
+ u32 hfnum;
+ enum dwc2_transaction_type tr_type;
+
+#ifdef DEBUG_SOF
+ dev_vdbg(hsotg->dev, "--Start of Frame Interrupt--\n");
+#endif
+
+ hfnum = readl(hsotg->regs + HFNUM);
+ hsotg->frame_number = hfnum >> HFNUM_FRNUM_SHIFT &
+ HFNUM_FRNUM_MASK >> HFNUM_FRNUM_SHIFT;
+
+ dwc2_track_missed_sofs(hsotg);
+
+ /* Determine whether any periodic QHs should be executed */
+ qh_entry = hsotg->periodic_sched_inactive.next;
+ while (qh_entry != &hsotg->periodic_sched_inactive) {
+ qh = list_entry(qh_entry, struct dwc2_qh, qh_list_entry);
+ qh_entry = qh_entry->next;
+ if (dwc2_frame_num_le(qh->sched_frame, hsotg->frame_number))
+ /*
+ * Move QH to the ready list to be executed next
+ * (micro)frame
+ */
+ list_move(&qh->qh_list_entry,
+ &hsotg->periodic_sched_ready);
+ }
+ tr_type = dwc2_hcd_select_transactions(hsotg);
+ if (tr_type != DWC2_TRANSACTION_NONE)
+ dwc2_hcd_queue_transactions(hsotg, tr_type);
+
+ /* Clear interrupt */
+ writel(GINTSTS_SOF, hsotg->regs + GINTSTS);
+}
+
+/*
+ * Handles the Rx FIFO Level Interrupt, which indicates that there is
+ * at least one packet in the Rx FIFO. The packets are moved from the FIFO to
+ * memory if the DWC_otg controller is operating in Slave mode.
+ */
+static void dwc2_rx_fifo_level_intr(struct dwc2_hsotg *hsotg)
+{
+ u32 grxsts, chnum, bcnt, dpid, pktsts;
+ struct dwc2_host_chan *chan;
+
+ dev_vdbg(hsotg->dev, "--RxFIFO Level Interrupt--\n");
+
+ grxsts = readl(hsotg->regs + GRXSTSP);
+ chnum = grxsts >> GRXSTS_HCHNUM_SHIFT &
+ GRXSTS_HCHNUM_MASK >> GRXSTS_HCHNUM_SHIFT;
+ chan = hsotg->hc_ptr_array[chnum];
+ if (!chan) {
+ dev_err(hsotg->dev, "Unable to get corresponding channel\n");
+ return;
+ }
+
+ bcnt = grxsts >> GRXSTS_BYTECNT_SHIFT &
+ GRXSTS_BYTECNT_MASK >> GRXSTS_BYTECNT_SHIFT;
+ dpid = grxsts >> GRXSTS_DPID_SHIFT &
+ GRXSTS_DPID_MASK >> GRXSTS_DPID_SHIFT;
+ pktsts = grxsts & GRXSTS_PKTSTS_MASK;
+
+ /* Packet Status */
+ dev_vdbg(hsotg->dev, " Ch num = %d\n", chnum);
+ dev_vdbg(hsotg->dev, " Count = %d\n", bcnt);
+ dev_vdbg(hsotg->dev, " DPID = %d, chan.dpid = %d\n", dpid,
+ chan->data_pid_start);
+ dev_vdbg(hsotg->dev, " PStatus = %d\n",
+ pktsts >> GRXSTS_PKTSTS_SHIFT &
+ GRXSTS_PKTSTS_MASK >> GRXSTS_PKTSTS_SHIFT);
+
+ switch (pktsts) {
+ case GRXSTS_PKTSTS_HCHIN:
+ /* Read the data into the host buffer */
+ if (bcnt > 0) {
+ dwc2_read_packet(hsotg, chan->xfer_buf, bcnt);
+
+ /* Update the HC fields for the next packet received */
+ chan->xfer_count += bcnt;
+ chan->xfer_buf += bcnt;
+ }
+ break;
+ case GRXSTS_PKTSTS_HCHIN_XFER_COMP:
+ case GRXSTS_PKTSTS_DATATOGGLEERR:
+ case GRXSTS_PKTSTS_HCHHALTED:
+ /* Handled in interrupt, just ignore data */
+ break;
+ default:
+ dev_err(hsotg->dev,
+ "RxFIFO Level Interrupt: Unknown status %d\n", pktsts);
+ break;
+ }
+}
+
+/*
+ * This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
+ * data packets may be written to the FIFO for OUT transfers. More requests
+ * may be written to the non-periodic request queue for IN transfers. This
+ * interrupt is enabled only in Slave mode.
+ */
+static void dwc2_np_tx_fifo_empty_intr(struct dwc2_hsotg *hsotg)
+{
+ dev_vdbg(hsotg->dev, "--Non-Periodic TxFIFO Empty Interrupt--\n");
+ dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_NON_PERIODIC);
+}
+
+/*
+ * This interrupt occurs when the periodic Tx FIFO is half-empty. More data
+ * packets may be written to the FIFO for OUT transfers. More requests may be
+ * written to the periodic request queue for IN transfers. This interrupt is
+ * enabled only in Slave mode.
+ */
+static void dwc2_perio_tx_fifo_empty_intr(struct dwc2_hsotg *hsotg)
+{
+ dev_vdbg(hsotg->dev, "--Periodic TxFIFO Empty Interrupt--\n");
+ dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_PERIODIC);
+}
+
+static void dwc2_hprt0_enable(struct dwc2_hsotg *hsotg, u32 hprt0,
+ u32 *hprt0_modify)
+{
+ struct dwc2_core_params *params = hsotg->core_params;
+ int do_reset = 0;
+ u32 usbcfg;
+ u32 prtspd;
+ u32 hcfg;
+ u32 hfir;
+
+ dev_vdbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
+
+ /* Every time when port enables calculate HFIR.FrInterval */
+ hfir = readl(hsotg->regs + HFIR);
+ hfir &= ~HFIR_FRINT_MASK;
+ hfir |= dwc2_calc_frame_interval(hsotg) << HFIR_FRINT_SHIFT &
+ HFIR_FRINT_MASK;
+ writel(hfir, hsotg->regs + HFIR);
+
+ /* Check if we need to adjust the PHY clock speed for low power */
+ if (!params->host_support_fs_ls_low_power) {
+ /* Port has been enabled, set the reset change flag */
+ hsotg->flags.b.port_reset_change = 1;
+ return;
+ }
+
+ usbcfg = readl(hsotg->regs + GUSBCFG);
+ prtspd = hprt0 & HPRT0_SPD_MASK;
+
+ if (prtspd == HPRT0_SPD_LOW_SPEED || prtspd == HPRT0_SPD_FULL_SPEED) {
+ /* Low power */
+ if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL)) {
+ /* Set PHY low power clock select for FS/LS devices */
+ usbcfg |= GUSBCFG_PHY_LP_CLK_SEL;
+ writel(usbcfg, hsotg->regs + GUSBCFG);
+ do_reset = 1;
+ }
+
+ hcfg = readl(hsotg->regs + HCFG);
+
+ if (prtspd == HPRT0_SPD_LOW_SPEED &&
+ params->host_ls_low_power_phy_clk ==
+ DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) {
+ /* 6 MHZ */
+ dev_vdbg(hsotg->dev,
+ "FS_PHY programming HCFG to 6 MHz\n");
+ if ((hcfg & HCFG_FSLSPCLKSEL_MASK) !=
+ HCFG_FSLSPCLKSEL_6_MHZ) {
+ hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
+ hcfg |= HCFG_FSLSPCLKSEL_6_MHZ;
+ writel(hcfg, hsotg->regs + HCFG);
+ do_reset = 1;
+ }
+ } else {
+ /* 48 MHZ */
+ dev_vdbg(hsotg->dev,
+ "FS_PHY programming HCFG to 48 MHz\n");
+ if ((hcfg & HCFG_FSLSPCLKSEL_MASK) !=
+ HCFG_FSLSPCLKSEL_48_MHZ) {
+ hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
+ hcfg |= HCFG_FSLSPCLKSEL_48_MHZ;
+ writel(hcfg, hsotg->regs + HCFG);
+ do_reset = 1;
+ }
+ }
+ } else {
+ /* Not low power */
+ if (usbcfg & GUSBCFG_PHY_LP_CLK_SEL) {
+ usbcfg &= ~GUSBCFG_PHY_LP_CLK_SEL;
+ writel(usbcfg, hsotg->regs + GUSBCFG);
+ do_reset = 1;
+ }
+ }
+
+ if (do_reset) {
+ *hprt0_modify |= HPRT0_RST;
+ queue_delayed_work(hsotg->wq_otg, &hsotg->reset_work,
+ msecs_to_jiffies(60));
+ } else {
+ /* Port has been enabled, set the reset change flag */
+ hsotg->flags.b.port_reset_change = 1;
+ }
+}
+
+/*
+ * There are multiple conditions that can cause a port interrupt. This function
+ * determines which interrupt conditions have occurred and handles them
+ * appropriately.
+ */
+static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
+{
+ u32 hprt0;
+ u32 hprt0_modify;
+
+ dev_vdbg(hsotg->dev, "--Port Interrupt--\n");
+
+ hprt0 = readl(hsotg->regs + HPRT0);
+ hprt0_modify = hprt0;
+
+ /*
+ * Clear appropriate bits in HPRT0 to clear the interrupt bit in
+ * GINTSTS
+ */
+ hprt0_modify &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG |
+ HPRT0_OVRCURRCHG);
+
+ /*
+ * Port Connect Detected
+ * Set flag and clear if detected
+ */
+ if (hprt0 & HPRT0_CONNDET) {
+ dev_vdbg(hsotg->dev,
+ "--Port Interrupt HPRT0=0x%08x Port Connect Detected--\n",
+ hprt0);
+ hsotg->flags.b.port_connect_status_change = 1;
+ hsotg->flags.b.port_connect_status = 1;
+ hprt0_modify |= HPRT0_CONNDET;
+
+ /*
+ * The Hub driver asserts a reset when it sees port connect
+ * status change flag
+ */
+ }
+
+ /*
+ * Port Enable Changed
+ * Clear if detected - Set internal flag if disabled
+ */
+ if (hprt0 & HPRT0_ENACHG) {
+ dev_vdbg(hsotg->dev,
+ " --Port Interrupt HPRT0=0x%08x Port Enable Changed (now %d)--\n",
+ hprt0, !!(hprt0 & HPRT0_ENA));
+ hprt0_modify |= HPRT0_ENACHG;
+ if (hprt0 & HPRT0_ENA)
+ dwc2_hprt0_enable(hsotg, hprt0, &hprt0_modify);
+ else
+ hsotg->flags.b.port_enable_change = 1;
+ }
+
+ /* Overcurrent Change Interrupt */
+ if (hprt0 & HPRT0_OVRCURRCHG) {
+ dev_vdbg(hsotg->dev,
+ " --Port Interrupt HPRT0=0x%08x Port Overcurrent Changed--\n",
+ hprt0);
+ hsotg->flags.b.port_over_current_change = 1;
+ hprt0_modify |= HPRT0_OVRCURRCHG;
+ }
+
+ /* Clear Port Interrupts */
+ writel(hprt0_modify, hsotg->regs + HPRT0);
+}
+
+/*
+ * Gets the actual length of a transfer after the transfer halts. halt_status
+ * holds the reason for the halt.
+ *
+ * For IN transfers where halt_status is DWC2_HC_XFER_COMPLETE, *short_read
+ * is set to 1 upon return if less than the requested number of bytes were
+ * transferred. short_read may also be NULL on entry, in which case it remains
+ * unchanged.
+ */
+static u32 dwc2_get_actual_xfer_length(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd,
+ enum dwc2_halt_status halt_status,
+ int *short_read)
+{
+ u32 hctsiz, count, length;
+
+ hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
+
+ if (halt_status == DWC2_HC_XFER_COMPLETE) {
+ if (chan->ep_is_in) {
+ count = hctsiz >> TSIZ_XFERSIZE_SHIFT &
+ TSIZ_XFERSIZE_MASK >> TSIZ_XFERSIZE_SHIFT;
+ length = chan->xfer_len - count;
+ if (short_read != NULL)
+ *short_read = (count != 0);
+ } else if (chan->qh->do_split) {
+ length = qtd->ssplit_out_xfer_count;
+ } else {
+ length = chan->xfer_len;
+ }
+ } else {
+ /*
+ * Must use the hctsiz.pktcnt field to determine how much data
+ * has been transferred. This field reflects the number of
+ * packets that have been transferred via the USB. This is
+ * always an integral number of packets if the transfer was
+ * halted before its normal completion. (Can't use the
+ * hctsiz.xfersize field because that reflects the number of
+ * bytes transferred via the AHB, not the USB).
+ */
+ count = hctsiz >> TSIZ_PKTCNT_SHIFT &
+ TSIZ_PKTCNT_MASK >> TSIZ_PKTCNT_SHIFT;
+ length = (chan->start_pkt_count - count) * chan->max_packet;
+ }
+
+ return length;
+}
+
+/**
+ * dwc2_update_urb_state() - Updates the state of the URB after a Transfer
+ * Complete interrupt on the host channel. Updates the actual_length field
+ * of the URB based on the number of bytes transferred via the host channel.
+ * Sets the URB status if the data transfer is finished.
+ *
+ * Return: 1 if the data transfer specified by the URB is completely finished,
+ * 0 otherwise
+ */
+static int dwc2_update_urb_state(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_hcd_urb *urb,
+ struct dwc2_qtd *qtd)
+{
+ u32 hctsiz;
+ int xfer_done = 0;
+ int short_read = 0;
+ int xfer_length = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd,
+ DWC2_HC_XFER_COMPLETE,
+ &short_read);
+
+ if (urb->actual_length + xfer_length > urb->length) {
+ dev_warn(hsotg->dev, "%s(): trimming xfer length\n", __func__);
+ xfer_length = urb->length - urb->actual_length;
+ }
+
+ /* Non DWORD-aligned buffer case handling */
+ if (chan->align_buf && xfer_length && chan->ep_is_in) {
+ dev_dbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__);
+ dma_sync_single_for_cpu(hsotg->dev, urb->dma, urb->length,
+ DMA_FROM_DEVICE);
+ memcpy(urb->buf + urb->actual_length, chan->qh->dw_align_buf,
+ xfer_length);
+ dma_sync_single_for_device(hsotg->dev, urb->dma, urb->length,
+ DMA_FROM_DEVICE);
+ }
+
+ dev_vdbg(hsotg->dev, "urb->actual_length=%d xfer_length=%d\n",
+ urb->actual_length, xfer_length);
+ urb->actual_length += xfer_length;
+
+ if (xfer_length && chan->ep_type == USB_ENDPOINT_XFER_BULK &&
+ (urb->flags & URB_SEND_ZERO_PACKET) &&
+ urb->actual_length >= urb->length &&
+ !(urb->length % chan->max_packet)) {
+ xfer_done = 0;
+ } else if (short_read || urb->actual_length >= urb->length) {
+ xfer_done = 1;
+ urb->status = 0;
+ }
+
+ hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
+ dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n",
+ __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum);
+ dev_vdbg(hsotg->dev, " chan->xfer_len %d\n", chan->xfer_len);
+ dev_vdbg(hsotg->dev, " hctsiz.xfersize %d\n",
+ hctsiz >> TSIZ_XFERSIZE_SHIFT &
+ TSIZ_XFERSIZE_MASK >> TSIZ_XFERSIZE_SHIFT);
+ dev_vdbg(hsotg->dev, " urb->transfer_buffer_length %d\n", urb->length);
+ dev_vdbg(hsotg->dev, " urb->actual_length %d\n", urb->actual_length);
+ dev_vdbg(hsotg->dev, " short_read %d, xfer_done %d\n", short_read,
+ xfer_done);
+
+ return xfer_done;
+}
+
+/*
+ * Save the starting data toggle for the next transfer. The data toggle is
+ * saved in the QH for non-control transfers and it's saved in the QTD for
+ * control transfers.
+ */
+void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ u32 hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
+ u32 pid = hctsiz & TSIZ_SC_MC_PID_MASK;
+
+ if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) {
+ if (pid == TSIZ_SC_MC_PID_DATA0)
+ chan->qh->data_toggle = DWC2_HC_PID_DATA0;
+ else
+ chan->qh->data_toggle = DWC2_HC_PID_DATA1;
+ } else {
+ if (pid == TSIZ_SC_MC_PID_DATA0)
+ qtd->data_toggle = DWC2_HC_PID_DATA0;
+ else
+ qtd->data_toggle = DWC2_HC_PID_DATA1;
+ }
+}
+
+/**
+ * dwc2_update_isoc_urb_state() - Updates the state of an Isochronous URB when
+ * the transfer is stopped for any reason. The fields of the current entry in
+ * the frame descriptor array are set based on the transfer state and the input
+ * halt_status. Completes the Isochronous URB if all the URB frames have been
+ * completed.
+ *
+ * Return: DWC2_HC_XFER_COMPLETE if there are more frames remaining to be
+ * transferred in the URB. Otherwise return DWC2_HC_XFER_URB_COMPLETE.
+ */
+static enum dwc2_halt_status dwc2_update_isoc_urb_state(
+ struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
+ int chnum, struct dwc2_qtd *qtd,
+ enum dwc2_halt_status halt_status)
+{
+ struct dwc2_hcd_iso_packet_desc *frame_desc;
+ struct dwc2_hcd_urb *urb = qtd->urb;
+
+ if (!urb)
+ return DWC2_HC_XFER_NO_HALT_STATUS;
+
+ frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
+
+ switch (halt_status) {
+ case DWC2_HC_XFER_COMPLETE:
+ frame_desc->status = 0;
+ frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg,
+ chan, chnum, qtd, halt_status, NULL);
+
+ /* Non DWORD-aligned buffer case handling */
+ if (chan->align_buf && frame_desc->actual_length &&
+ chan->ep_is_in) {
+ dev_dbg(hsotg->dev, "%s(): non-aligned buffer\n",
+ __func__);
+ dma_sync_single_for_cpu(hsotg->dev, urb->dma,
+ urb->length, DMA_FROM_DEVICE);
+ memcpy(urb->buf + frame_desc->offset +
+ qtd->isoc_split_offset, chan->qh->dw_align_buf,
+ frame_desc->actual_length);
+ dma_sync_single_for_device(hsotg->dev, urb->dma,
+ urb->length,
+ DMA_FROM_DEVICE);
+ }
+ break;
+ case DWC2_HC_XFER_FRAME_OVERRUN:
+ urb->error_count++;
+ if (chan->ep_is_in)
+ frame_desc->status = -ENOSR;
+ else
+ frame_desc->status = -ECOMM;
+ frame_desc->actual_length = 0;
+ break;
+ case DWC2_HC_XFER_BABBLE_ERR:
+ urb->error_count++;
+ frame_desc->status = -EOVERFLOW;
+ /* Don't need to update actual_length in this case */
+ break;
+ case DWC2_HC_XFER_XACT_ERR:
+ urb->error_count++;
+ frame_desc->status = -EPROTO;
+ frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg,
+ chan, chnum, qtd, halt_status, NULL);
+
+ /* Non DWORD-aligned buffer case handling */
+ if (chan->align_buf && frame_desc->actual_length &&
+ chan->ep_is_in) {
+ dev_dbg(hsotg->dev, "%s(): non-aligned buffer\n",
+ __func__);
+ dma_sync_single_for_cpu(hsotg->dev, urb->dma,
+ urb->length, DMA_FROM_DEVICE);
+ memcpy(urb->buf + frame_desc->offset +
+ qtd->isoc_split_offset, chan->qh->dw_align_buf,
+ frame_desc->actual_length);
+ dma_sync_single_for_device(hsotg->dev, urb->dma,
+ urb->length,
+ DMA_FROM_DEVICE);
+ }
+
+ /* Skip whole frame */
+ if (chan->qh->do_split &&
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC && chan->ep_is_in &&
+ hsotg->core_params->dma_enable > 0) {
+ qtd->complete_split = 0;
+ qtd->isoc_split_offset = 0;
+ }
+
+ break;
+ default:
+ dev_err(hsotg->dev, "Unhandled halt_status (%d)\n",
+ halt_status);
+ break;
+ }
+
+ if (++qtd->isoc_frame_index == urb->packet_count) {
+ /*
+ * urb->status is not used for isoc transfers. The individual
+ * frame_desc statuses are used instead.
+ */
+ dwc2_host_complete(hsotg, urb->priv, urb, 0);
+ halt_status = DWC2_HC_XFER_URB_COMPLETE;
+ } else {
+ halt_status = DWC2_HC_XFER_COMPLETE;
+ }
+
+ return halt_status;
+}
+
+/*
+ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
+ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
+ * still linked to the QH, the QH is added to the end of the inactive
+ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
+ * schedule if no more QTDs are linked to the QH.
+ */
+static void dwc2_deactivate_qh(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+ int free_qtd)
+{
+ int continue_split = 0;
+ struct dwc2_qtd *qtd;
+
+ dev_vdbg(hsotg->dev, " %s(%p,%p,%d)\n", __func__, hsotg, qh, free_qtd);
+
+ if (list_empty(&qh->qtd_list)) {
+ dev_dbg(hsotg->dev, "## QTD list empty ##\n");
+ goto no_qtd;
+ }
+
+ qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry);
+
+ if (qtd->complete_split)
+ continue_split = 1;
+ else if (qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_MID ||
+ qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_END)
+ continue_split = 1;
+
+ if (free_qtd) {
+ dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
+ continue_split = 0;
+ }
+
+no_qtd:
+ if (qh->channel)
+ qh->channel->align_buf = 0;
+ qh->channel = NULL;
+ dwc2_hcd_qh_deactivate(hsotg, qh, continue_split);
+}
+
+/**
+ * dwc2_release_channel() - Releases a host channel for use by other transfers
+ *
+ * @hsotg: The HCD state structure
+ * @chan: The host channel to release
+ * @qtd: The QTD associated with the host channel. This QTD may be
+ * freed if the transfer is complete or an error has occurred.
+ * @halt_status: Reason the channel is being released. This status
+ * determines the actions taken by this function.
+ *
+ * Also attempts to select and queue more transactions since at least one host
+ * channel is available.
+ */
+static void dwc2_release_channel(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan,
+ struct dwc2_qtd *qtd,
+ enum dwc2_halt_status halt_status)
+{
+ enum dwc2_transaction_type tr_type;
+ u32 haintmsk;
+ int free_qtd = 0;
+
+ dev_vdbg(hsotg->dev, " %s: channel %d, halt_status %d\n",
+ __func__, chan->hc_num, halt_status);
+
+ switch (halt_status) {
+ case DWC2_HC_XFER_URB_COMPLETE:
+ free_qtd = 1;
+ break;
+ case DWC2_HC_XFER_AHB_ERR:
+ case DWC2_HC_XFER_STALL:
+ case DWC2_HC_XFER_BABBLE_ERR:
+ free_qtd = 1;
+ break;
+ case DWC2_HC_XFER_XACT_ERR:
+ if (qtd->error_count >= 3) {
+ dev_vdbg(hsotg->dev,
+ " Complete URB with transaction error\n");
+ free_qtd = 1;
+ if (qtd->urb) {
+ qtd->urb->status = -EPROTO;
+ dwc2_host_complete(hsotg, qtd->urb->priv,
+ qtd->urb, -EPROTO);
+ }
+ }
+ break;
+ case DWC2_HC_XFER_URB_DEQUEUE:
+ /*
+ * The QTD has already been removed and the QH has been
+ * deactivated. Don't want to do anything except release the
+ * host channel and try to queue more transfers.
+ */
+ goto cleanup;
+ case DWC2_HC_XFER_PERIODIC_INCOMPLETE:
+ dev_vdbg(hsotg->dev, " Complete URB with I/O error\n");
+ free_qtd = 1;
+ if (qtd->urb) {
+ qtd->urb->status = -EIO;
+ dwc2_host_complete(hsotg, qtd->urb->priv, qtd->urb,
+ -EIO);
+ }
+ break;
+ case DWC2_HC_XFER_NO_HALT_STATUS:
+ default:
+ break;
+ }
+
+ dwc2_deactivate_qh(hsotg, chan->qh, free_qtd);
+
+cleanup:
+ /*
+ * Release the host channel for use by other transfers. The cleanup
+ * function clears the channel interrupt enables and conditions, so
+ * there's no need to clear the Channel Halted interrupt separately.
+ */
+ if (!list_empty(&chan->hc_list_entry))
+ list_del(&chan->hc_list_entry);
+ dwc2_hc_cleanup(hsotg, chan);
+ list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list);
+
+ switch (chan->ep_type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ case USB_ENDPOINT_XFER_BULK:
+ hsotg->non_periodic_channels--;
+ break;
+ default:
+ /*
+ * Don't release reservations for periodic channels here.
+ * That's done when a periodic transfer is descheduled (i.e.
+ * when the QH is removed from the periodic schedule).
+ */
+ break;
+ }
+
+ haintmsk = readl(hsotg->regs + HAINTMSK);
+ haintmsk &= ~(1 << chan->hc_num);
+ writel(haintmsk, hsotg->regs + HAINTMSK);
+
+ /* Try to queue more transfers now that there's a free channel */
+ tr_type = dwc2_hcd_select_transactions(hsotg);
+ if (tr_type != DWC2_TRANSACTION_NONE)
+ dwc2_hcd_queue_transactions(hsotg, tr_type);
+}
+
+/*
+ * Halts a host channel. If the channel cannot be halted immediately because
+ * the request queue is full, this function ensures that the FIFO empty
+ * interrupt for the appropriate queue is enabled so that the halt request can
+ * be queued when there is space in the request queue.
+ *
+ * This function may also be called in DMA mode. In that case, the channel is
+ * simply released since the core always halts the channel automatically in
+ * DMA mode.
+ */
+static void dwc2_halt_channel(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, struct dwc2_qtd *qtd,
+ enum dwc2_halt_status halt_status)
+{
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ if (hsotg->core_params->dma_enable > 0) {
+ dev_vdbg(hsotg->dev, "DMA enabled\n");
+ dwc2_release_channel(hsotg, chan, qtd, halt_status);
+ return;
+ }
+
+ /* Slave mode processing */
+ dwc2_hc_halt(hsotg, chan, halt_status);
+
+ if (chan->halt_on_queue) {
+ u32 gintmsk;
+
+ dev_vdbg(hsotg->dev, "Halt on queue\n");
+ if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
+ chan->ep_type == USB_ENDPOINT_XFER_BULK) {
+ dev_vdbg(hsotg->dev, "control/bulk\n");
+ /*
+ * Make sure the Non-periodic Tx FIFO empty interrupt
+ * is enabled so that the non-periodic schedule will
+ * be processed
+ */
+ gintmsk = readl(hsotg->regs + GINTMSK);
+ gintmsk |= GINTSTS_NPTXFEMP;
+ writel(gintmsk, hsotg->regs + GINTMSK);
+ } else {
+ dev_vdbg(hsotg->dev, "isoc/intr\n");
+ /*
+ * Move the QH from the periodic queued schedule to
+ * the periodic assigned schedule. This allows the
+ * halt to be queued when the periodic schedule is
+ * processed.
+ */
+ list_move(&chan->qh->qh_list_entry,
+ &hsotg->periodic_sched_assigned);
+
+ /*
+ * Make sure the Periodic Tx FIFO Empty interrupt is
+ * enabled so that the periodic schedule will be
+ * processed
+ */
+ gintmsk = readl(hsotg->regs + GINTMSK);
+ gintmsk |= GINTSTS_PTXFEMP;
+ writel(gintmsk, hsotg->regs + GINTMSK);
+ }
+ }
+}
+
+/*
+ * Performs common cleanup for non-periodic transfers after a Transfer
+ * Complete interrupt. This function should be called after any endpoint type
+ * specific handling is finished to release the host channel.
+ */
+static void dwc2_complete_non_periodic_xfer(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan,
+ int chnum, struct dwc2_qtd *qtd,
+ enum dwc2_halt_status halt_status)
+{
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ qtd->error_count = 0;
+
+ if (chan->hcint & HCINTMSK_NYET) {
+ /*
+ * Got a NYET on the last transaction of the transfer. This
+ * means that the endpoint should be in the PING state at the
+ * beginning of the next transfer.
+ */
+ dev_vdbg(hsotg->dev, "got NYET\n");
+ chan->qh->ping_state = 1;
+ }
+
+ /*
+ * Always halt and release the host channel to make it available for
+ * more transfers. There may still be more phases for a control
+ * transfer or more data packets for a bulk transfer at this point,
+ * but the host channel is still halted. A channel will be reassigned
+ * to the transfer when the non-periodic schedule is processed after
+ * the channel is released. This allows transactions to be queued
+ * properly via dwc2_hcd_queue_transactions, which also enables the
+ * Tx FIFO Empty interrupt if necessary.
+ */
+ if (chan->ep_is_in) {
+ /*
+ * IN transfers in Slave mode require an explicit disable to
+ * halt the channel. (In DMA mode, this call simply releases
+ * the channel.)
+ */
+ dwc2_halt_channel(hsotg, chan, qtd, halt_status);
+ } else {
+ /*
+ * The channel is automatically disabled by the core for OUT
+ * transfers in Slave mode
+ */
+ dwc2_release_channel(hsotg, chan, qtd, halt_status);
+ }
+}
+
+/*
+ * Performs common cleanup for periodic transfers after a Transfer Complete
+ * interrupt. This function should be called after any endpoint type specific
+ * handling is finished to release the host channel.
+ */
+static void dwc2_complete_periodic_xfer(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd,
+ enum dwc2_halt_status halt_status)
+{
+ u32 hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
+
+ qtd->error_count = 0;
+
+ if (!chan->ep_is_in || (hctsiz & TSIZ_PKTCNT_MASK) == 0)
+ /* Core halts channel in these cases */
+ dwc2_release_channel(hsotg, chan, qtd, halt_status);
+ else
+ /* Flush any outstanding requests from the Tx queue */
+ dwc2_halt_channel(hsotg, chan, qtd, halt_status);
+}
+
+static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ struct dwc2_hcd_iso_packet_desc *frame_desc;
+ u32 len;
+
+ if (!qtd->urb)
+ return 0;
+
+ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
+ len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd,
+ DWC2_HC_XFER_COMPLETE, NULL);
+ if (!len) {
+ qtd->complete_split = 0;
+ qtd->isoc_split_offset = 0;
+ return 0;
+ }
+
+ frame_desc->actual_length += len;
+
+ if (chan->align_buf && len) {
+ dev_dbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__);
+ dma_sync_single_for_cpu(hsotg->dev, qtd->urb->dma,
+ qtd->urb->length, DMA_FROM_DEVICE);
+ memcpy(qtd->urb->buf + frame_desc->offset +
+ qtd->isoc_split_offset, chan->qh->dw_align_buf, len);
+ dma_sync_single_for_device(hsotg->dev, qtd->urb->dma,
+ qtd->urb->length, DMA_FROM_DEVICE);
+ }
+
+ qtd->isoc_split_offset += len;
+
+ if (frame_desc->actual_length >= frame_desc->length) {
+ frame_desc->status = 0;
+ qtd->isoc_frame_index++;
+ qtd->complete_split = 0;
+ qtd->isoc_split_offset = 0;
+ }
+
+ if (qtd->isoc_frame_index == qtd->urb->packet_count) {
+ dwc2_host_complete(hsotg, qtd->urb->priv, qtd->urb, 0);
+ dwc2_release_channel(hsotg, chan, qtd,
+ DWC2_HC_XFER_URB_COMPLETE);
+ } else {
+ dwc2_release_channel(hsotg, chan, qtd,
+ DWC2_HC_XFER_NO_HALT_STATUS);
+ }
+
+ return 1; /* Indicates that channel released */
+}
+
+/*
+ * Handles a host channel Transfer Complete interrupt. This handler may be
+ * called in either DMA mode or Slave mode.
+ */
+static void dwc2_hc_xfercomp_intr(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ struct dwc2_hcd_urb *urb = qtd->urb;
+ int pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
+ enum dwc2_halt_status halt_status = DWC2_HC_XFER_COMPLETE;
+ int urb_xfer_done;
+
+ dev_vdbg(hsotg->dev,
+ "--Host Channel %d Interrupt: Transfer Complete--\n", chnum);
+
+ if (hsotg->core_params->dma_desc_enable > 0) {
+ dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, halt_status);
+ if (pipe_type == USB_ENDPOINT_XFER_ISOC)
+ /* Do not disable the interrupt, just clear it */
+ return;
+ goto handle_xfercomp_done;
+ }
+
+ /* Handle xfer complete on CSPLIT */
+ if (chan->qh->do_split) {
+ if (chan->ep_type == USB_ENDPOINT_XFER_ISOC && chan->ep_is_in &&
+ hsotg->core_params->dma_enable > 0) {
+ if (qtd->complete_split &&
+ dwc2_xfercomp_isoc_split_in(hsotg, chan, chnum,
+ qtd))
+ goto handle_xfercomp_done;
+ } else {
+ qtd->complete_split = 0;
+ }
+ }
+
+ if (!urb)
+ goto handle_xfercomp_done;
+
+ /* Update the QTD and URB states */
+ switch (pipe_type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ switch (qtd->control_phase) {
+ case DWC2_CONTROL_SETUP:
+ if (urb->length > 0)
+ qtd->control_phase = DWC2_CONTROL_DATA;
+ else
+ qtd->control_phase = DWC2_CONTROL_STATUS;
+ dev_vdbg(hsotg->dev,
+ " Control setup transaction done\n");
+ halt_status = DWC2_HC_XFER_COMPLETE;
+ break;
+ case DWC2_CONTROL_DATA:
+ urb_xfer_done = dwc2_update_urb_state(hsotg, chan,
+ chnum, urb, qtd);
+ if (urb_xfer_done) {
+ qtd->control_phase = DWC2_CONTROL_STATUS;
+ dev_vdbg(hsotg->dev,
+ " Control data transfer done\n");
+ } else {
+ dwc2_hcd_save_data_toggle(hsotg, chan, chnum,
+ qtd);
+ }
+ halt_status = DWC2_HC_XFER_COMPLETE;
+ break;
+ case DWC2_CONTROL_STATUS:
+ dev_vdbg(hsotg->dev, " Control transfer complete\n");
+ if (urb->status == -EINPROGRESS)
+ urb->status = 0;
+ dwc2_host_complete(hsotg, urb->priv, urb, urb->status);
+ halt_status = DWC2_HC_XFER_URB_COMPLETE;
+ break;
+ }
+
+ dwc2_complete_non_periodic_xfer(hsotg, chan, chnum, qtd,
+ halt_status);
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ dev_vdbg(hsotg->dev, " Bulk transfer complete\n");
+ urb_xfer_done = dwc2_update_urb_state(hsotg, chan, chnum, urb,
+ qtd);
+ if (urb_xfer_done) {
+ dwc2_host_complete(hsotg, urb->priv, urb, urb->status);
+ halt_status = DWC2_HC_XFER_URB_COMPLETE;
+ } else {
+ halt_status = DWC2_HC_XFER_COMPLETE;
+ }
+
+ dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
+ dwc2_complete_non_periodic_xfer(hsotg, chan, chnum, qtd,
+ halt_status);
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ dev_vdbg(hsotg->dev, " Interrupt transfer complete\n");
+ urb_xfer_done = dwc2_update_urb_state(hsotg, chan, chnum, urb,
+ qtd);
+
+ /*
+ * Interrupt URB is done on the first transfer complete
+ * interrupt
+ */
+ if (urb_xfer_done) {
+ dwc2_host_complete(hsotg, urb->priv, urb,
+ urb->status);
+ halt_status = DWC2_HC_XFER_URB_COMPLETE;
+ } else {
+ halt_status = DWC2_HC_XFER_COMPLETE;
+ }
+
+ dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
+ dwc2_complete_periodic_xfer(hsotg, chan, chnum, qtd,
+ halt_status);
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ dev_vdbg(hsotg->dev, " Isochronous transfer complete\n");
+ if (qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_ALL)
+ halt_status = dwc2_update_isoc_urb_state(hsotg, chan,
+ chnum, qtd, DWC2_HC_XFER_COMPLETE);
+ dwc2_complete_periodic_xfer(hsotg, chan, chnum, qtd,
+ halt_status);
+ break;
+ }
+
+handle_xfercomp_done:
+ disable_hc_int(hsotg, chnum, HCINTMSK_XFERCOMPL);
+}
+
+/*
+ * Handles a host channel STALL interrupt. This handler may be called in
+ * either DMA mode or Slave mode.
+ */
+static void dwc2_hc_stall_intr(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ struct dwc2_hcd_urb *urb = qtd->urb;
+ int pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
+
+ dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: STALL Received--\n",
+ chnum);
+
+ if (hsotg->core_params->dma_desc_enable > 0) {
+ dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
+ DWC2_HC_XFER_STALL);
+ goto handle_stall_done;
+ }
+
+ if (!urb)
+ goto handle_stall_halt;
+
+ if (pipe_type == USB_ENDPOINT_XFER_CONTROL)
+ dwc2_host_complete(hsotg, urb->priv, urb, -EPIPE);
+
+ if (pipe_type == USB_ENDPOINT_XFER_BULK ||
+ pipe_type == USB_ENDPOINT_XFER_INT) {
+ dwc2_host_complete(hsotg, urb->priv, urb, -EPIPE);
+ /*
+ * USB protocol requires resetting the data toggle for bulk
+ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
+ * setup command is issued to the endpoint. Anticipate the
+ * CLEAR_FEATURE command since a STALL has occurred and reset
+ * the data toggle now.
+ */
+ chan->qh->data_toggle = 0;
+ }
+
+handle_stall_halt:
+ dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_STALL);
+
+handle_stall_done:
+ disable_hc_int(hsotg, chnum, HCINTMSK_STALL);
+}
+
+/*
+ * Updates the state of the URB when a transfer has been stopped due to an
+ * abnormal condition before the transfer completes. Modifies the
+ * actual_length field of the URB to reflect the number of bytes that have
+ * actually been transferred via the host channel.
+ */
+static void dwc2_update_urb_state_abn(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_hcd_urb *urb,
+ struct dwc2_qtd *qtd,
+ enum dwc2_halt_status halt_status)
+{
+ u32 xfer_length = dwc2_get_actual_xfer_length(hsotg, chan, chnum,
+ qtd, halt_status, NULL);
+ u32 hctsiz;
+
+ if (urb->actual_length + xfer_length > urb->length) {
+ dev_warn(hsotg->dev, "%s(): trimming xfer length\n", __func__);
+ xfer_length = urb->length - urb->actual_length;
+ }
+
+ /* Non DWORD-aligned buffer case handling */
+ if (chan->align_buf && xfer_length && chan->ep_is_in) {
+ dev_dbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__);
+ dma_sync_single_for_cpu(hsotg->dev, urb->dma, urb->length,
+ DMA_FROM_DEVICE);
+ memcpy(urb->buf + urb->actual_length, chan->qh->dw_align_buf,
+ xfer_length);
+ dma_sync_single_for_device(hsotg->dev, urb->dma, urb->length,
+ DMA_FROM_DEVICE);
+ }
+
+ urb->actual_length += xfer_length;
+
+ hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
+ dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n",
+ __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum);
+ dev_vdbg(hsotg->dev, " chan->start_pkt_count %d\n",
+ chan->start_pkt_count);
+ dev_vdbg(hsotg->dev, " hctsiz.pktcnt %d\n",
+ hctsiz >> TSIZ_PKTCNT_SHIFT &
+ TSIZ_PKTCNT_MASK >> TSIZ_PKTCNT_SHIFT);
+ dev_vdbg(hsotg->dev, " chan->max_packet %d\n", chan->max_packet);
+ dev_vdbg(hsotg->dev, " bytes_transferred %d\n",
+ xfer_length);
+ dev_vdbg(hsotg->dev, " urb->actual_length %d\n",
+ urb->actual_length);
+ dev_vdbg(hsotg->dev, " urb->transfer_buffer_length %d\n",
+ urb->length);
+}
+
+/*
+ * Handles a host channel NAK interrupt. This handler may be called in either
+ * DMA mode or Slave mode.
+ */
+static void dwc2_hc_nak_intr(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: NAK Received--\n",
+ chnum);
+
+ /*
+ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
+ * interrupt. Re-start the SSPLIT transfer.
+ */
+ if (chan->do_split) {
+ if (chan->complete_split)
+ qtd->error_count = 0;
+ qtd->complete_split = 0;
+ dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK);
+ goto handle_nak_done;
+ }
+
+ switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ case USB_ENDPOINT_XFER_BULK:
+ if (hsotg->core_params->dma_enable > 0 && chan->ep_is_in) {
+ /*
+ * NAK interrupts are enabled on bulk/control IN
+ * transfers in DMA mode for the sole purpose of
+ * resetting the error count after a transaction error
+ * occurs. The core will continue transferring data.
+ */
+ qtd->error_count = 0;
+ break;
+ }
+
+ /*
+ * NAK interrupts normally occur during OUT transfers in DMA
+ * or Slave mode. For IN transfers, more requests will be
+ * queued as request queue space is available.
+ */
+ qtd->error_count = 0;
+
+ if (!chan->qh->ping_state) {
+ dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb,
+ qtd, DWC2_HC_XFER_NAK);
+ dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
+
+ if (chan->speed == USB_SPEED_HIGH)
+ chan->qh->ping_state = 1;
+ }
+
+ /*
+ * Halt the channel so the transfer can be re-started from
+ * the appropriate point or the PING protocol will
+ * start/continue
+ */
+ dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK);
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ qtd->error_count = 0;
+ dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK);
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ /* Should never get called for isochronous transfers */
+ dev_err(hsotg->dev, "NACK interrupt for ISOC transfer\n");
+ break;
+ }
+
+handle_nak_done:
+ disable_hc_int(hsotg, chnum, HCINTMSK_NAK);
+}
+
+/*
+ * Handles a host channel ACK interrupt. This interrupt is enabled when
+ * performing the PING protocol in Slave mode, when errors occur during
+ * either Slave mode or DMA mode, and during Start Split transactions.
+ */
+static void dwc2_hc_ack_intr(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ struct dwc2_hcd_iso_packet_desc *frame_desc;
+
+ dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: ACK Received--\n",
+ chnum);
+
+ if (chan->do_split) {
+ /* Handle ACK on SSPLIT. ACK should not occur in CSPLIT. */
+ if (!chan->ep_is_in &&
+ chan->data_pid_start != DWC2_HC_PID_SETUP)
+ qtd->ssplit_out_xfer_count = chan->xfer_len;
+
+ if (chan->ep_type != USB_ENDPOINT_XFER_ISOC || chan->ep_is_in) {
+ qtd->complete_split = 1;
+ dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_ACK);
+ } else {
+ /* ISOC OUT */
+ switch (chan->xact_pos) {
+ case DWC2_HCSPLT_XACTPOS_ALL:
+ break;
+ case DWC2_HCSPLT_XACTPOS_END:
+ qtd->isoc_split_pos = DWC2_HCSPLT_XACTPOS_ALL;
+ qtd->isoc_split_offset = 0;
+ break;
+ case DWC2_HCSPLT_XACTPOS_BEGIN:
+ case DWC2_HCSPLT_XACTPOS_MID:
+ /*
+ * For BEGIN or MID, calculate the length for
+ * the next microframe to determine the correct
+ * SSPLIT token, either MID or END
+ */
+ frame_desc = &qtd->urb->iso_descs[
+ qtd->isoc_frame_index];
+ qtd->isoc_split_offset += 188;
+
+ if (frame_desc->length - qtd->isoc_split_offset
+ <= 188)
+ qtd->isoc_split_pos =
+ DWC2_HCSPLT_XACTPOS_END;
+ else
+ qtd->isoc_split_pos =
+ DWC2_HCSPLT_XACTPOS_MID;
+ break;
+ }
+ }
+ } else {
+ qtd->error_count = 0;
+
+ if (chan->qh->ping_state) {
+ chan->qh->ping_state = 0;
+ /*
+ * Halt the channel so the transfer can be re-started
+ * from the appropriate point. This only happens in
+ * Slave mode. In DMA mode, the ping_state is cleared
+ * when the transfer is started because the core
+ * automatically executes the PING, then the transfer.
+ */
+ dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_ACK);
+ }
+ }
+
+ /*
+ * If the ACK occurred when _not_ in the PING state, let the channel
+ * continue transferring data after clearing the error count
+ */
+ disable_hc_int(hsotg, chnum, HCINTMSK_ACK);
+}
+
+/*
+ * Handles a host channel NYET interrupt. This interrupt should only occur on
+ * Bulk and Control OUT endpoints and for complete split transactions. If a
+ * NYET occurs at the same time as a Transfer Complete interrupt, it is
+ * handled in the xfercomp interrupt handler, not here. This handler may be
+ * called in either DMA mode or Slave mode.
+ */
+static void dwc2_hc_nyet_intr(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: NYET Received--\n",
+ chnum);
+
+ /*
+ * NYET on CSPLIT
+ * re-do the CSPLIT immediately on non-periodic
+ */
+ if (chan->do_split && chan->complete_split) {
+ if (chan->ep_is_in && chan->ep_type == USB_ENDPOINT_XFER_ISOC &&
+ hsotg->core_params->dma_enable > 0) {
+ qtd->complete_split = 0;
+ qtd->isoc_split_offset = 0;
+ if (++qtd->isoc_frame_index == qtd->urb->packet_count) {
+ if (qtd->urb)
+ dwc2_host_complete(hsotg,
+ qtd->urb->priv,
+ qtd->urb, 0);
+ dwc2_release_channel(hsotg, chan, qtd,
+ DWC2_HC_XFER_URB_COMPLETE);
+ } else {
+ dwc2_release_channel(hsotg, chan, qtd,
+ DWC2_HC_XFER_NO_HALT_STATUS);
+ }
+ goto handle_nyet_done;
+ }
+
+ if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+ int frnum = dwc2_hcd_get_frame_number(hsotg);
+
+ if (dwc2_full_frame_num(frnum) !=
+ dwc2_full_frame_num(chan->qh->sched_frame)) {
+ /*
+ * No longer in the same full speed frame.
+ * Treat this as a transaction error.
+ */
+#if 0
+ /*
+ * Todo: Fix system performance so this can
+ * be treated as an error. Right now complete
+ * splits cannot be scheduled precisely enough
+ * due to other system activity, so this error
+ * occurs regularly in Slave mode.
+ */
+ qtd->error_count++;
+#endif
+ qtd->complete_split = 0;
+ dwc2_halt_channel(hsotg, chan, qtd,
+ DWC2_HC_XFER_XACT_ERR);
+ /* Todo: add support for isoc release */
+ goto handle_nyet_done;
+ }
+ }
+
+ dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NYET);
+ goto handle_nyet_done;
+ }
+
+ chan->qh->ping_state = 1;
+ qtd->error_count = 0;
+
+ dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb, qtd,
+ DWC2_HC_XFER_NYET);
+ dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
+
+ /*
+ * Halt the channel and re-start the transfer so the PING protocol
+ * will start
+ */
+ dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NYET);
+
+handle_nyet_done:
+ disable_hc_int(hsotg, chnum, HCINTMSK_NYET);
+}
+
+/*
+ * Handles a host channel babble interrupt. This handler may be called in
+ * either DMA mode or Slave mode.
+ */
+static void dwc2_hc_babble_intr(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: Babble Error--\n",
+ chnum);
+
+ if (hsotg->core_params->dma_desc_enable > 0) {
+ dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
+ DWC2_HC_XFER_BABBLE_ERR);
+ goto handle_babble_done;
+ }
+
+ if (chan->ep_type != USB_ENDPOINT_XFER_ISOC) {
+ if (qtd->urb)
+ dwc2_host_complete(hsotg, qtd->urb->priv, qtd->urb,
+ -EOVERFLOW);
+ dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_BABBLE_ERR);
+ } else {
+ enum dwc2_halt_status halt_status;
+
+ halt_status = dwc2_update_isoc_urb_state(hsotg, chan, chnum,
+ qtd, DWC2_HC_XFER_BABBLE_ERR);
+ dwc2_halt_channel(hsotg, chan, qtd, halt_status);
+ }
+
+handle_babble_done:
+ dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
+ disable_hc_int(hsotg, chnum, HCINTMSK_BBLERR);
+}
+
+/*
+ * Handles a host channel AHB error interrupt. This handler is only called in
+ * DMA mode.
+ */
+static void dwc2_hc_ahberr_intr(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ struct dwc2_hcd_urb *urb = qtd->urb;
+ char *pipetype, *speed;
+ u32 hcchar;
+ u32 hcsplt;
+ u32 hctsiz;
+ u32 hc_dma;
+
+ dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: AHB Error--\n",
+ chnum);
+
+ if (!urb)
+ goto handle_ahberr_halt;
+
+ hcchar = readl(hsotg->regs + HCCHAR(chnum));
+ hcsplt = readl(hsotg->regs + HCSPLT(chnum));
+ hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
+ hc_dma = readl(hsotg->regs + HCDMA(chnum));
+
+ dev_err(hsotg->dev, "AHB ERROR, Channel %d\n", chnum);
+ dev_err(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", hcchar, hcsplt);
+ dev_err(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n", hctsiz, hc_dma);
+ dev_err(hsotg->dev, " Device address: %d\n",
+ dwc2_hcd_get_dev_addr(&urb->pipe_info));
+ dev_err(hsotg->dev, " Endpoint: %d, %s\n",
+ dwc2_hcd_get_ep_num(&urb->pipe_info),
+ dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
+
+ switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ pipetype = "CONTROL";
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ pipetype = "BULK";
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ pipetype = "INTERRUPT";
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ pipetype = "ISOCHRONOUS";
+ break;
+ default:
+ pipetype = "UNKNOWN";
+ break;
+ }
+
+ dev_err(hsotg->dev, " Endpoint type: %s\n", pipetype);
+
+ switch (chan->speed) {
+ case USB_SPEED_HIGH:
+ speed = "HIGH";
+ break;
+ case USB_SPEED_FULL:
+ speed = "FULL";
+ break;
+ case USB_SPEED_LOW:
+ speed = "LOW";
+ break;
+ default:
+ speed = "UNKNOWN";
+ break;
+ }
+
+ dev_err(hsotg->dev, " Speed: %s\n", speed);
+
+ dev_err(hsotg->dev, " Max packet size: %d\n",
+ dwc2_hcd_get_mps(&urb->pipe_info));
+ dev_err(hsotg->dev, " Data buffer length: %d\n", urb->length);
+ dev_err(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %p\n",
+ urb->buf, (void *)urb->dma);
+ dev_err(hsotg->dev, " Setup buffer: %p, Setup DMA: %p\n",
+ urb->setup_packet, (void *)urb->setup_dma);
+ dev_err(hsotg->dev, " Interval: %d\n", urb->interval);
+
+ /* Core halts the channel for Descriptor DMA mode */
+ if (hsotg->core_params->dma_desc_enable > 0) {
+ dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
+ DWC2_HC_XFER_AHB_ERR);
+ goto handle_ahberr_done;
+ }
+
+ dwc2_host_complete(hsotg, urb->priv, urb, -EIO);
+
+handle_ahberr_halt:
+ /*
+ * Force a channel halt. Don't call dwc2_halt_channel because that won't
+ * write to the HCCHARn register in DMA mode to force the halt.
+ */
+ dwc2_hc_halt(hsotg, chan, DWC2_HC_XFER_AHB_ERR);
+
+handle_ahberr_done:
+ dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
+ disable_hc_int(hsotg, chnum, HCINTMSK_AHBERR);
+}
+
+/*
+ * Handles a host channel transaction error interrupt. This handler may be
+ * called in either DMA mode or Slave mode.
+ */
+static void dwc2_hc_xacterr_intr(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ dev_dbg(hsotg->dev,
+ "--Host Channel %d Interrupt: Transaction Error--\n", chnum);
+
+ if (hsotg->core_params->dma_desc_enable > 0) {
+ dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
+ DWC2_HC_XFER_XACT_ERR);
+ goto handle_xacterr_done;
+ }
+
+ switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ case USB_ENDPOINT_XFER_BULK:
+ qtd->error_count++;
+ if (!chan->qh->ping_state) {
+
+ dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb,
+ qtd, DWC2_HC_XFER_XACT_ERR);
+ dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
+ if (!chan->ep_is_in && chan->speed == USB_SPEED_HIGH)
+ chan->qh->ping_state = 1;
+ }
+
+ /*
+ * Halt the channel so the transfer can be re-started from
+ * the appropriate point or the PING protocol will start
+ */
+ dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR);
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ qtd->error_count++;
+ if (chan->do_split && chan->complete_split)
+ qtd->complete_split = 0;
+ dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR);
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ {
+ enum dwc2_halt_status halt_status;
+
+ halt_status = dwc2_update_isoc_urb_state(hsotg, chan,
+ chnum, qtd, DWC2_HC_XFER_XACT_ERR);
+ dwc2_halt_channel(hsotg, chan, qtd, halt_status);
+ }
+ break;
+ }
+
+handle_xacterr_done:
+ dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
+ disable_hc_int(hsotg, chnum, HCINTMSK_XACTERR);
+}
+
+/*
+ * Handles a host channel frame overrun interrupt. This handler may be called
+ * in either DMA mode or Slave mode.
+ */
+static void dwc2_hc_frmovrun_intr(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ enum dwc2_halt_status halt_status;
+
+ dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: Frame Overrun--\n",
+ chnum);
+
+ switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ case USB_ENDPOINT_XFER_BULK:
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_FRAME_OVERRUN);
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ halt_status = dwc2_update_isoc_urb_state(hsotg, chan, chnum,
+ qtd, DWC2_HC_XFER_FRAME_OVERRUN);
+ dwc2_halt_channel(hsotg, chan, qtd, halt_status);
+ break;
+ }
+
+ dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
+ disable_hc_int(hsotg, chnum, HCINTMSK_FRMOVRUN);
+}
+
+/*
+ * Handles a host channel data toggle error interrupt. This handler may be
+ * called in either DMA mode or Slave mode.
+ */
+static void dwc2_hc_datatglerr_intr(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ dev_dbg(hsotg->dev,
+ "--Host Channel %d Interrupt: Data Toggle Error--\n", chnum);
+
+ if (chan->ep_is_in)
+ qtd->error_count = 0;
+ else
+ dev_err(hsotg->dev,
+ "Data Toggle Error on OUT transfer, channel %d\n",
+ chnum);
+
+ dwc2_hc_handle_tt_clear(hsotg, chan, qtd);
+ disable_hc_int(hsotg, chnum, HCINTMSK_DATATGLERR);
+}
+
+/*
+ * For debug only. It checks that a valid halt status is set and that
+ * HCCHARn.chdis is clear. If there's a problem, corrective action is
+ * taken and a warning is issued.
+ *
+ * Return: true if halt status is ok, false otherwise
+ */
+static bool dwc2_halt_status_ok(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+#ifdef DEBUG
+ u32 hcchar;
+ u32 hctsiz;
+ u32 hcintmsk;
+ u32 hcsplt;
+
+ if (chan->halt_status == DWC2_HC_XFER_NO_HALT_STATUS) {
+ /*
+ * This code is here only as a check. This condition should
+ * never happen. Ignore the halt if it does occur.
+ */
+ hcchar = readl(hsotg->regs + HCCHAR(chnum));
+ hctsiz = readl(hsotg->regs + HCTSIZ(chnum));
+ hcintmsk = readl(hsotg->regs + HCINTMSK(chnum));
+ hcsplt = readl(hsotg->regs + HCSPLT(chnum));
+ dev_dbg(hsotg->dev,
+ "%s: chan->halt_status DWC2_HC_XFER_NO_HALT_STATUS,\n",
+ __func__);
+ dev_dbg(hsotg->dev,
+ "channel %d, hcchar 0x%08x, hctsiz 0x%08x,\n",
+ chnum, hcchar, hctsiz);
+ dev_dbg(hsotg->dev,
+ "hcint 0x%08x, hcintmsk 0x%08x, hcsplt 0x%08x,\n",
+ chan->hcint, hcintmsk, hcsplt);
+ dev_dbg(hsotg->dev, "qtd->complete_split %d\n",
+ qtd->complete_split);
+ dev_warn(hsotg->dev,
+ "%s: no halt status, channel %d, ignoring interrupt\n",
+ __func__, chnum);
+ return false;
+ }
+
+ /*
+ * This code is here only as a check. hcchar.chdis should never be set
+ * when the halt interrupt occurs. Halt the channel again if it does
+ * occur.
+ */
+ hcchar = readl(hsotg->regs + HCCHAR(chnum));
+ if (hcchar & HCCHAR_CHDIS) {
+ dev_warn(hsotg->dev,
+ "%s: hcchar.chdis set unexpectedly, hcchar 0x%08x, trying to halt again\n",
+ __func__, hcchar);
+ chan->halt_pending = 0;
+ dwc2_halt_channel(hsotg, chan, qtd, chan->halt_status);
+ return false;
+ }
+#endif
+
+ return true;
+}
+
+/*
+ * Handles a host Channel Halted interrupt in DMA mode. This handler
+ * determines the reason the channel halted and proceeds accordingly.
+ */
+static void dwc2_hc_chhltd_intr_dma(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ u32 hcintmsk;
+ int out_nak_enh = 0;
+
+ dev_vdbg(hsotg->dev,
+ "--Host Channel %d Interrupt: DMA Channel Halted--\n", chnum);
+
+ /*
+ * For core with OUT NAK enhancement, the flow for high-speed
+ * CONTROL/BULK OUT is handled a little differently
+ */
+ if (hsotg->snpsid >= DWC2_CORE_REV_2_71a) {
+ if (chan->speed == USB_SPEED_HIGH && !chan->ep_is_in &&
+ (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
+ chan->ep_type == USB_ENDPOINT_XFER_BULK)) {
+ out_nak_enh = 1;
+ }
+ }
+
+ if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE ||
+ (chan->halt_status == DWC2_HC_XFER_AHB_ERR &&
+ hsotg->core_params->dma_desc_enable <= 0)) {
+ if (hsotg->core_params->dma_desc_enable > 0)
+ dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum,
+ chan->halt_status);
+ else
+ /*
+ * Just release the channel. A dequeue can happen on a
+ * transfer timeout. In the case of an AHB Error, the
+ * channel was forced to halt because there's no way to
+ * gracefully recover.
+ */
+ dwc2_release_channel(hsotg, chan, qtd,
+ chan->halt_status);
+ return;
+ }
+
+ hcintmsk = readl(hsotg->regs + HCINTMSK(chnum));
+
+ if (chan->hcint & HCINTMSK_XFERCOMPL) {
+ /*
+ * Todo: This is here because of a possible hardware bug. Spec
+ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
+ * interrupt w/ACK bit set should occur, but I only see the
+ * XFERCOMP bit, even with it masked out. This is a workaround
+ * for that behavior. Should fix this when hardware is fixed.
+ */
+ if (chan->ep_type == USB_ENDPOINT_XFER_ISOC && !chan->ep_is_in)
+ dwc2_hc_ack_intr(hsotg, chan, chnum, qtd);
+ dwc2_hc_xfercomp_intr(hsotg, chan, chnum, qtd);
+ } else if (chan->hcint & HCINTMSK_STALL) {
+ dwc2_hc_stall_intr(hsotg, chan, chnum, qtd);
+ } else if ((chan->hcint & HCINTMSK_XACTERR) &&
+ hsotg->core_params->dma_desc_enable <= 0) {
+ if (out_nak_enh) {
+ if (chan->hcint &
+ (HCINTMSK_NYET | HCINTMSK_NAK | HCINTMSK_ACK)) {
+ dev_vdbg(hsotg->dev,
+ "XactErr with NYET/NAK/ACK\n");
+ qtd->error_count = 0;
+ } else {
+ dev_vdbg(hsotg->dev,
+ "XactErr without NYET/NAK/ACK\n");
+ }
+ }
+
+ /*
+ * Must handle xacterr before nak or ack. Could get a xacterr
+ * at the same time as either of these on a BULK/CONTROL OUT
+ * that started with a PING. The xacterr takes precedence.
+ */
+ dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd);
+ } else if ((chan->hcint & HCINTMSK_XCS_XACT) &&
+ hsotg->core_params->dma_desc_enable > 0) {
+ dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd);
+ } else if ((chan->hcint & HCINTMSK_AHBERR) &&
+ hsotg->core_params->dma_desc_enable > 0) {
+ dwc2_hc_ahberr_intr(hsotg, chan, chnum, qtd);
+ } else if (chan->hcint & HCINTMSK_BBLERR) {
+ dwc2_hc_babble_intr(hsotg, chan, chnum, qtd);
+ } else if (chan->hcint & HCINTMSK_FRMOVRUN) {
+ dwc2_hc_frmovrun_intr(hsotg, chan, chnum, qtd);
+ } else if (!out_nak_enh) {
+ if (chan->hcint & HCINTMSK_NYET) {
+ /*
+ * Must handle nyet before nak or ack. Could get a nyet
+ * at the same time as either of those on a BULK/CONTROL
+ * OUT that started with a PING. The nyet takes
+ * precedence.
+ */
+ dwc2_hc_nyet_intr(hsotg, chan, chnum, qtd);
+ } else if ((chan->hcint & HCINTMSK_NAK) &&
+ !(hcintmsk & HCINTMSK_NAK)) {
+ /*
+ * If nak is not masked, it's because a non-split IN
+ * transfer is in an error state. In that case, the nak
+ * is handled by the nak interrupt handler, not here.
+ * Handle nak here for BULK/CONTROL OUT transfers, which
+ * halt on a NAK to allow rewinding the buffer pointer.
+ */
+ dwc2_hc_nak_intr(hsotg, chan, chnum, qtd);
+ } else if ((chan->hcint & HCINTMSK_ACK) &&
+ !(hcintmsk & HCINTMSK_ACK)) {
+ /*
+ * If ack is not masked, it's because a non-split IN
+ * transfer is in an error state. In that case, the ack
+ * is handled by the ack interrupt handler, not here.
+ * Handle ack here for split transfers. Start splits
+ * halt on ACK.
+ */
+ dwc2_hc_ack_intr(hsotg, chan, chnum, qtd);
+ } else {
+ if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+ chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
+ /*
+ * A periodic transfer halted with no other
+ * channel interrupts set. Assume it was halted
+ * by the core because it could not be completed
+ * in its scheduled (micro)frame.
+ */
+ dev_dbg(hsotg->dev,
+ "%s: Halt channel %d (assume incomplete periodic transfer)\n",
+ __func__, chnum);
+ dwc2_halt_channel(hsotg, chan, qtd,
+ DWC2_HC_XFER_PERIODIC_INCOMPLETE);
+ } else {
+ dev_err(hsotg->dev,
+ "%s: Channel %d - ChHltd set, but reason is unknown\n",
+ __func__, chnum);
+ dev_err(hsotg->dev,
+ "hcint 0x%08x, intsts 0x%08x\n",
+ chan->hcint,
+ readl(hsotg->regs + GINTSTS));
+ }
+ }
+ } else {
+ dev_info(hsotg->dev,
+ "NYET/NAK/ACK/other in non-error case, 0x%08x\n",
+ chan->hcint);
+ }
+}
+
+/*
+ * Handles a host channel Channel Halted interrupt
+ *
+ * In slave mode, this handler is called only when the driver specifically
+ * requests a halt. This occurs during handling other host channel interrupts
+ * (e.g. nak, xacterr, stall, nyet, etc.).
+ *
+ * In DMA mode, this is the interrupt that occurs when the core has finished
+ * processing a transfer on a channel. Other host channel interrupts (except
+ * ahberr) are disabled in DMA mode.
+ */
+static void dwc2_hc_chhltd_intr(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan, int chnum,
+ struct dwc2_qtd *qtd)
+{
+ dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: Channel Halted--\n",
+ chnum);
+
+ if (hsotg->core_params->dma_enable > 0) {
+ dwc2_hc_chhltd_intr_dma(hsotg, chan, chnum, qtd);
+ } else {
+ if (!dwc2_halt_status_ok(hsotg, chan, chnum, qtd))
+ return;
+ dwc2_release_channel(hsotg, chan, qtd, chan->halt_status);
+ }
+}
+
+/* Handles interrupt for a specific Host Channel */
+static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum)
+{
+ struct dwc2_qtd *qtd;
+ struct dwc2_host_chan *chan;
+ u32 hcint, hcintmsk;
+
+ dev_vdbg(hsotg->dev, "--Host Channel Interrupt--, Channel %d\n", chnum);
+
+ hcint = readl(hsotg->regs + HCINT(chnum));
+ hcintmsk = readl(hsotg->regs + HCINTMSK(chnum));
+ dev_vdbg(hsotg->dev,
+ " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
+ hcint, hcintmsk, hcint & hcintmsk);
+
+ chan = hsotg->hc_ptr_array[chnum];
+ if (!chan) {
+ dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n");
+ writel(hcint, hsotg->regs + HCINT(chnum));
+ return;
+ }
+
+ writel(hcint, hsotg->regs + HCINT(chnum));
+ chan->hcint = hcint;
+ hcint &= hcintmsk;
+
+ if (list_empty(&chan->qh->qtd_list)) {
+ dev_dbg(hsotg->dev, "## no QTD queued for channel %d ##\n",
+ chnum);
+ dev_dbg(hsotg->dev,
+ " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
+ chan->hcint, hcintmsk, hcint);
+ chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS;
+ disable_hc_int(hsotg, chnum, HCINTMSK_CHHLTD);
+ chan->hcint = 0;
+ return;
+ }
+
+ qtd = list_first_entry(&chan->qh->qtd_list, struct dwc2_qtd,
+ qtd_list_entry);
+
+ if (hsotg->core_params->dma_enable <= 0) {
+ if ((hcint & HCINTMSK_CHHLTD) && hcint != HCINTMSK_CHHLTD)
+ hcint &= ~HCINTMSK_CHHLTD;
+ }
+
+ if (hcint & HCINTMSK_XFERCOMPL) {
+ dwc2_hc_xfercomp_intr(hsotg, chan, chnum, qtd);
+ /*
+ * If NYET occurred at same time as Xfer Complete, the NYET is
+ * handled by the Xfer Complete interrupt handler. Don't want
+ * to call the NYET interrupt handler in this case.
+ */
+ hcint &= ~HCINTMSK_NYET;
+ }
+ if (hcint & HCINTMSK_CHHLTD)
+ dwc2_hc_chhltd_intr(hsotg, chan, chnum, qtd);
+ if (hcint & HCINTMSK_AHBERR)
+ dwc2_hc_ahberr_intr(hsotg, chan, chnum, qtd);
+ if (hcint & HCINTMSK_STALL)
+ dwc2_hc_stall_intr(hsotg, chan, chnum, qtd);
+ if (hcint & HCINTMSK_NAK)
+ dwc2_hc_nak_intr(hsotg, chan, chnum, qtd);
+ if (hcint & HCINTMSK_ACK)
+ dwc2_hc_ack_intr(hsotg, chan, chnum, qtd);
+ if (hcint & HCINTMSK_NYET)
+ dwc2_hc_nyet_intr(hsotg, chan, chnum, qtd);
+ if (hcint & HCINTMSK_XACTERR)
+ dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd);
+ if (hcint & HCINTMSK_BBLERR)
+ dwc2_hc_babble_intr(hsotg, chan, chnum, qtd);
+ if (hcint & HCINTMSK_FRMOVRUN)
+ dwc2_hc_frmovrun_intr(hsotg, chan, chnum, qtd);
+ if (hcint & HCINTMSK_DATATGLERR)
+ dwc2_hc_datatglerr_intr(hsotg, chan, chnum, qtd);
+
+ chan->hcint = 0;
+}
+
+/*
+ * This interrupt indicates that one or more host channels has a pending
+ * interrupt. There are multiple conditions that can cause each host channel
+ * interrupt. This function determines which conditions have occurred for each
+ * host channel interrupt and handles them appropriately.
+ */
+static void dwc2_hc_intr(struct dwc2_hsotg *hsotg)
+{
+ u32 haint;
+ int i;
+
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ haint = readl(hsotg->regs + HAINT);
+ dev_vdbg(hsotg->dev, "HAINT=%08x\n", haint);
+
+ for (i = 0; i < hsotg->core_params->host_channels; i++) {
+ if (haint & (1 << i))
+ dwc2_hc_n_intr(hsotg, i);
+ }
+}
+
+/* This function handles interrupts for the HCD */
+int dwc2_hcd_intr(struct dwc2_hsotg *hsotg)
+{
+ u32 gintsts;
+ int retval = 0;
+
+ if (dwc2_check_core_status(hsotg) < 0) {
+ dev_warn(hsotg->dev, "Controller is disconnected");
+ return 0;
+ }
+
+ spin_lock(&hsotg->lock);
+
+ /* Check if HOST Mode */
+ if (dwc2_is_host_mode(hsotg)) {
+ gintsts = dwc2_read_core_intr(hsotg);
+ if (!gintsts) {
+ spin_unlock(&hsotg->lock);
+ return 0;
+ }
+
+ retval = 1;
+
+#ifndef DEBUG_SOF
+ /* Don't print debug message in the interrupt handler on SOF */
+ if (gintsts != GINTSTS_SOF)
+#endif
+ dev_vdbg(hsotg->dev,
+ "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n",
+ gintsts);
+
+ if (gintsts & GINTSTS_SOF)
+ dwc2_sof_intr(hsotg);
+ if (gintsts & GINTSTS_RXFLVL)
+ dwc2_rx_fifo_level_intr(hsotg);
+ if (gintsts & GINTSTS_NPTXFEMP)
+ dwc2_np_tx_fifo_empty_intr(hsotg);
+ if (gintsts & GINTSTS_I2CINT)
+ /* Todo: Implement i2cintr handler */
+ writel(GINTSTS_I2CINT, hsotg->regs + GINTSTS);
+ if (gintsts & GINTSTS_PRTINT)
+ dwc2_port_intr(hsotg);
+ if (gintsts & GINTSTS_HCHINT)
+ dwc2_hc_intr(hsotg);
+ if (gintsts & GINTSTS_PTXFEMP)
+ dwc2_perio_tx_fifo_empty_intr(hsotg);
+
+#ifndef DEBUG_SOF
+ if (gintsts != GINTSTS_SOF) {
+#endif
+ dev_vdbg(hsotg->dev,
+ "DWC OTG HCD Finished Servicing Interrupts\n");
+ dev_vdbg(hsotg->dev,
+ "DWC OTG HCD gintsts=0x%08x gintmsk=0x%08x\n",
+ readl(hsotg->regs + GINTSTS),
+ readl(hsotg->regs + GINTMSK));
+#ifndef DEBUG_SOF
+ }
+#endif
+ }
+
+ spin_unlock(&hsotg->lock);
+
+ return retval;
+}
--- /dev/null
+/*
+ * hcd_queue.c - DesignWare HS OTG Controller host queuing routines
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * This file contains the functions to manage Queue Heads and Queue
+ * Transfer Descriptors for Host mode
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+/**
+ * dwc2_qh_init() - Initializes a QH structure
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: The QH to init
+ * @urb: Holds the information about the device/endpoint needed to initialize
+ * the QH
+ */
+#define SCHEDULE_SLOP 10
+static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+ struct dwc2_hcd_urb *urb)
+{
+ int dev_speed, hub_addr, hub_port;
+ char *speed, *type;
+
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ /* Initialize QH */
+ qh->ep_type = dwc2_hcd_get_pipe_type(&urb->pipe_info);
+ qh->ep_is_in = dwc2_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0;
+
+ qh->data_toggle = DWC2_HC_PID_DATA0;
+ qh->maxp = dwc2_hcd_get_mps(&urb->pipe_info);
+ INIT_LIST_HEAD(&qh->qtd_list);
+ INIT_LIST_HEAD(&qh->qh_list_entry);
+
+ /* FS/LS Endpoint on HS Hub, NOT virtual root hub */
+ dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
+
+ dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port);
+
+ if ((dev_speed == USB_SPEED_LOW || dev_speed == USB_SPEED_FULL) &&
+ hub_addr != 0 && hub_addr != 1) {
+ dev_vdbg(hsotg->dev,
+ "QH init: EP %d: TT found at hub addr %d, for port %d\n",
+ dwc2_hcd_get_ep_num(&urb->pipe_info), hub_addr,
+ hub_port);
+ qh->do_split = 1;
+ }
+
+ if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
+ qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
+ /* Compute scheduling parameters once and save them */
+ u32 hprt, prtspd;
+
+ /* Todo: Account for split transfers in the bus time */
+ int bytecount =
+ dwc2_hb_mult(qh->maxp) * dwc2_max_packet(qh->maxp);
+
+ qh->usecs = NS_TO_US(usb_calc_bus_time(qh->do_split ?
+ USB_SPEED_HIGH : dev_speed, qh->ep_is_in,
+ qh->ep_type == USB_ENDPOINT_XFER_ISOC,
+ bytecount));
+ /* Start in a slightly future (micro)frame */
+ qh->sched_frame = dwc2_frame_num_inc(hsotg->frame_number,
+ SCHEDULE_SLOP);
+ qh->interval = urb->interval;
+#if 0
+ /* Increase interrupt polling rate for debugging */
+ if (qh->ep_type == USB_ENDPOINT_XFER_INT)
+ qh->interval = 8;
+#endif
+ hprt = readl(hsotg->regs + HPRT0);
+ prtspd = hprt & HPRT0_SPD_MASK;
+ if (prtspd == HPRT0_SPD_HIGH_SPEED &&
+ (dev_speed == USB_SPEED_LOW ||
+ dev_speed == USB_SPEED_FULL)) {
+ qh->interval *= 8;
+ qh->sched_frame |= 0x7;
+ qh->start_split_frame = qh->sched_frame;
+ }
+ dev_dbg(hsotg->dev, "interval=%d\n", qh->interval);
+ }
+
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH Initialized\n");
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - qh = %p\n", qh);
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Device Address = %d\n",
+ dwc2_hcd_get_dev_addr(&urb->pipe_info));
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Endpoint %d, %s\n",
+ dwc2_hcd_get_ep_num(&urb->pipe_info),
+ dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
+
+ qh->dev_speed = dev_speed;
+
+ switch (dev_speed) {
+ case USB_SPEED_LOW:
+ speed = "low";
+ break;
+ case USB_SPEED_FULL:
+ speed = "full";
+ break;
+ case USB_SPEED_HIGH:
+ speed = "high";
+ break;
+ default:
+ speed = "?";
+ break;
+ }
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Speed = %s\n", speed);
+
+ switch (qh->ep_type) {
+ case USB_ENDPOINT_XFER_ISOC:
+ type = "isochronous";
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ type = "interrupt";
+ break;
+ case USB_ENDPOINT_XFER_CONTROL:
+ type = "control";
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ type = "bulk";
+ break;
+ default:
+ type = "?";
+ break;
+ }
+
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Type = %s\n", type);
+
+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - usecs = %d\n",
+ qh->usecs);
+ dev_vdbg(hsotg->dev, "DWC OTG HCD QH - interval = %d\n",
+ qh->interval);
+ }
+}
+
+/**
+ * dwc2_hcd_qh_create() - Allocates and initializes a QH
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @urb: Holds the information about the device/endpoint needed
+ * to initialize the QH
+ * @atomic_alloc: Flag to do atomic allocation if needed
+ *
+ * Return: Pointer to the newly allocated QH, or NULL on error
+ */
+static struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
+ struct dwc2_hcd_urb *urb,
+ gfp_t mem_flags)
+{
+ struct dwc2_qh *qh;
+
+ /* Allocate memory */
+ qh = kzalloc(sizeof(*qh), mem_flags);
+ if (!qh)
+ return NULL;
+
+ dwc2_qh_init(hsotg, qh, urb);
+
+ if (hsotg->core_params->dma_desc_enable > 0 &&
+ dwc2_hcd_qh_init_ddma(hsotg, qh, mem_flags) < 0) {
+ dwc2_hcd_qh_free(hsotg, qh);
+ return NULL;
+ }
+
+ return qh;
+}
+
+/**
+ * dwc2_hcd_qh_free() - Frees the QH
+ *
+ * @hsotg: HCD instance
+ * @qh: The QH to free
+ *
+ * QH should already be removed from the list. QTD list should already be empty
+ * if called from URB Dequeue.
+ *
+ * Must NOT be called with interrupt disabled or spinlock held
+ */
+void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ u32 buf_size;
+
+ if (hsotg->core_params->dma_desc_enable > 0) {
+ dwc2_hcd_qh_free_ddma(hsotg, qh);
+ } else if (qh->dw_align_buf) {
+ if (qh->ep_type == USB_ENDPOINT_XFER_ISOC)
+ buf_size = 4096;
+ else
+ buf_size = hsotg->core_params->max_transfer_size;
+ dma_free_coherent(hsotg->dev, buf_size, qh->dw_align_buf,
+ qh->dw_align_buf_dma);
+ }
+
+ kfree(qh);
+}
+
+/**
+ * dwc2_periodic_channel_available() - Checks that a channel is available for a
+ * periodic transfer
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ *
+ * Return: 0 if successful, negative error code otherise
+ */
+static int dwc2_periodic_channel_available(struct dwc2_hsotg *hsotg)
+{
+ /*
+ * Currently assuming that there is a dedicated host channnel for
+ * each periodic transaction plus at least one host channel for
+ * non-periodic transactions
+ */
+ int status;
+ int num_channels;
+
+ num_channels = hsotg->core_params->host_channels;
+ if (hsotg->periodic_channels + hsotg->non_periodic_channels <
+ num_channels
+ && hsotg->periodic_channels < num_channels - 1) {
+ status = 0;
+ } else {
+ dev_dbg(hsotg->dev,
+ "%s: Total channels: %d, Periodic: %d, "
+ "Non-periodic: %d\n", __func__, num_channels,
+ hsotg->periodic_channels, hsotg->non_periodic_channels);
+ status = -ENOSPC;
+ }
+
+ return status;
+}
+
+/**
+ * dwc2_check_periodic_bandwidth() - Checks that there is sufficient bandwidth
+ * for the specified QH in the periodic schedule
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: QH containing periodic bandwidth required
+ *
+ * Return: 0 if successful, negative error code otherwise
+ *
+ * For simplicity, this calculation assumes that all the transfers in the
+ * periodic schedule may occur in the same (micro)frame
+ */
+static int dwc2_check_periodic_bandwidth(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh)
+{
+ int status;
+ s16 max_claimed_usecs;
+
+ status = 0;
+
+ if (qh->dev_speed == USB_SPEED_HIGH || qh->do_split) {
+ /*
+ * High speed mode
+ * Max periodic usecs is 80% x 125 usec = 100 usec
+ */
+ max_claimed_usecs = 100 - qh->usecs;
+ } else {
+ /*
+ * Full speed mode
+ * Max periodic usecs is 90% x 1000 usec = 900 usec
+ */
+ max_claimed_usecs = 900 - qh->usecs;
+ }
+
+ if (hsotg->periodic_usecs > max_claimed_usecs) {
+ dev_err(hsotg->dev,
+ "%s: already claimed usecs %d, required usecs %d\n",
+ __func__, hsotg->periodic_usecs, qh->usecs);
+ status = -ENOSPC;
+ }
+
+ return status;
+}
+
+/**
+ * dwc2_check_max_xfer_size() - Checks that the max transfer size allowed in a
+ * host channel is large enough to handle the maximum data transfer in a single
+ * (micro)frame for a periodic transfer
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: QH for a periodic endpoint
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+static int dwc2_check_max_xfer_size(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh)
+{
+ u32 max_xfer_size;
+ u32 max_channel_xfer_size;
+ int status = 0;
+
+ max_xfer_size = dwc2_max_packet(qh->maxp) * dwc2_hb_mult(qh->maxp);
+ max_channel_xfer_size = hsotg->core_params->max_transfer_size;
+
+ if (max_xfer_size > max_channel_xfer_size) {
+ dev_err(hsotg->dev,
+ "%s: Periodic xfer length %d > max xfer length for channel %d\n",
+ __func__, max_xfer_size, max_channel_xfer_size);
+ status = -ENOSPC;
+ }
+
+ return status;
+}
+
+/**
+ * dwc2_schedule_periodic() - Schedules an interrupt or isochronous transfer in
+ * the periodic schedule
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: QH for the periodic transfer. The QH should already contain the
+ * scheduling information.
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+static int dwc2_schedule_periodic(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ int status;
+
+ status = dwc2_periodic_channel_available(hsotg);
+ if (status) {
+ dev_dbg(hsotg->dev,
+ "%s: No host channel available for periodic transfer\n",
+ __func__);
+ return status;
+ }
+
+ status = dwc2_check_periodic_bandwidth(hsotg, qh);
+ if (status) {
+ dev_dbg(hsotg->dev,
+ "%s: Insufficient periodic bandwidth for periodic transfer\n",
+ __func__);
+ return status;
+ }
+
+ status = dwc2_check_max_xfer_size(hsotg, qh);
+ if (status) {
+ dev_dbg(hsotg->dev,
+ "%s: Channel max transfer size too small for periodic transfer\n",
+ __func__);
+ return status;
+ }
+
+ if (hsotg->core_params->dma_desc_enable > 0)
+ /* Don't rely on SOF and start in ready schedule */
+ list_add_tail(&qh->qh_list_entry, &hsotg->periodic_sched_ready);
+ else
+ /* Always start in inactive schedule */
+ list_add_tail(&qh->qh_list_entry,
+ &hsotg->periodic_sched_inactive);
+
+ /* Reserve periodic channel */
+ hsotg->periodic_channels++;
+
+ /* Update claimed usecs per (micro)frame */
+ hsotg->periodic_usecs += qh->usecs;
+
+ return status;
+}
+
+/**
+ * dwc2_deschedule_periodic() - Removes an interrupt or isochronous transfer
+ * from the periodic schedule
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: QH for the periodic transfer
+ */
+static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh)
+{
+ list_del_init(&qh->qh_list_entry);
+
+ /* Release periodic channel reservation */
+ hsotg->periodic_channels--;
+
+ /* Update claimed usecs per (micro)frame */
+ hsotg->periodic_usecs -= qh->usecs;
+}
+
+/**
+ * dwc2_hcd_qh_add() - Adds a QH to either the non periodic or periodic
+ * schedule if it is not already in the schedule. If the QH is already in
+ * the schedule, no action is taken.
+ *
+ * @hsotg: The HCD state structure for the DWC OTG controller
+ * @qh: The QH to add
+ *
+ * Return: 0 if successful, negative error code otherwise
+ */
+int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ int status = 0;
+ u32 intr_mask;
+
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ if (!list_empty(&qh->qh_list_entry))
+ /* QH already in a schedule */
+ return status;
+
+ /* Add the new QH to the appropriate schedule */
+ if (dwc2_qh_is_non_per(qh)) {
+ /* Always start in inactive schedule */
+ list_add_tail(&qh->qh_list_entry,
+ &hsotg->non_periodic_sched_inactive);
+ } else {
+ status = dwc2_schedule_periodic(hsotg, qh);
+ if (status == 0) {
+ if (!hsotg->periodic_qh_count) {
+ intr_mask = readl(hsotg->regs + GINTMSK);
+ intr_mask |= GINTSTS_SOF;
+ writel(intr_mask, hsotg->regs + GINTMSK);
+ }
+ hsotg->periodic_qh_count++;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * dwc2_hcd_qh_unlink() - Removes a QH from either the non-periodic or periodic
+ * schedule. Memory is not freed.
+ *
+ * @hsotg: The HCD state structure
+ * @qh: QH to remove from schedule
+ */
+void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
+{
+ u32 intr_mask;
+
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ if (list_empty(&qh->qh_list_entry))
+ /* QH is not in a schedule */
+ return;
+
+ if (dwc2_qh_is_non_per(qh)) {
+ if (hsotg->non_periodic_qh_ptr == &qh->qh_list_entry)
+ hsotg->non_periodic_qh_ptr =
+ hsotg->non_periodic_qh_ptr->next;
+ list_del_init(&qh->qh_list_entry);
+ } else {
+ dwc2_deschedule_periodic(hsotg, qh);
+ hsotg->periodic_qh_count--;
+ if (!hsotg->periodic_qh_count) {
+ intr_mask = readl(hsotg->regs + GINTMSK);
+ intr_mask &= ~GINTSTS_SOF;
+ writel(intr_mask, hsotg->regs + GINTMSK);
+ }
+ }
+}
+
+/*
+ * Schedule the next continuing periodic split transfer
+ */
+static void dwc2_sched_periodic_split(struct dwc2_hsotg *hsotg,
+ struct dwc2_qh *qh, u16 frame_number,
+ int sched_next_periodic_split)
+{
+ u16 incr;
+
+ if (sched_next_periodic_split) {
+ qh->sched_frame = frame_number;
+ incr = dwc2_frame_num_inc(qh->start_split_frame, 1);
+ if (dwc2_frame_num_le(frame_number, incr)) {
+ /*
+ * Allow one frame to elapse after start split
+ * microframe before scheduling complete split, but
+ * DON'T if we are doing the next start split in the
+ * same frame for an ISOC out
+ */
+ if (qh->ep_type != USB_ENDPOINT_XFER_ISOC ||
+ qh->ep_is_in != 0) {
+ qh->sched_frame =
+ dwc2_frame_num_inc(qh->sched_frame, 1);
+ }
+ }
+ } else {
+ qh->sched_frame = dwc2_frame_num_inc(qh->start_split_frame,
+ qh->interval);
+ if (dwc2_frame_num_le(qh->sched_frame, frame_number))
+ qh->sched_frame = frame_number;
+ qh->sched_frame |= 0x7;
+ qh->start_split_frame = qh->sched_frame;
+ }
+}
+
+/*
+ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
+ * non-periodic schedule. The QH is added to the inactive non-periodic
+ * schedule if any QTDs are still attached to the QH.
+ *
+ * For periodic QHs, the QH is removed from the periodic queued schedule. If
+ * there are any QTDs still attached to the QH, the QH is added to either the
+ * periodic inactive schedule or the periodic ready schedule and its next
+ * scheduled frame is calculated. The QH is placed in the ready schedule if
+ * the scheduled frame has been reached already. Otherwise it's placed in the
+ * inactive schedule. If there are no QTDs attached to the QH, the QH is
+ * completely removed from the periodic schedule.
+ */
+void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
+ int sched_next_periodic_split)
+{
+ dev_vdbg(hsotg->dev, "%s()\n", __func__);
+
+ if (dwc2_qh_is_non_per(qh)) {
+ dwc2_hcd_qh_unlink(hsotg, qh);
+ if (!list_empty(&qh->qtd_list))
+ /* Add back to inactive non-periodic schedule */
+ dwc2_hcd_qh_add(hsotg, qh);
+ } else {
+ u16 frame_number = dwc2_hcd_get_frame_number(hsotg);
+
+ if (qh->do_split) {
+ dwc2_sched_periodic_split(hsotg, qh, frame_number,
+ sched_next_periodic_split);
+ } else {
+ qh->sched_frame = dwc2_frame_num_inc(qh->sched_frame,
+ qh->interval);
+ if (dwc2_frame_num_le(qh->sched_frame, frame_number))
+ qh->sched_frame = frame_number;
+ }
+
+ if (list_empty(&qh->qtd_list)) {
+ dwc2_hcd_qh_unlink(hsotg, qh);
+ } else {
+ /*
+ * Remove from periodic_sched_queued and move to
+ * appropriate queue
+ */
+ if (qh->sched_frame == frame_number)
+ list_move(&qh->qh_list_entry,
+ &hsotg->periodic_sched_ready);
+ else
+ list_move(&qh->qh_list_entry,
+ &hsotg->periodic_sched_inactive);
+ }
+ }
+}
+
+/**
+ * dwc2_hcd_qtd_init() - Initializes a QTD structure
+ *
+ * @qtd: The QTD to initialize
+ * @urb: The associated URB
+ */
+void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb)
+{
+ qtd->urb = urb;
+ if (dwc2_hcd_get_pipe_type(&urb->pipe_info) ==
+ USB_ENDPOINT_XFER_CONTROL) {
+ /*
+ * The only time the QTD data toggle is used is on the data
+ * phase of control transfers. This phase always starts with
+ * DATA1.
+ */
+ qtd->data_toggle = DWC2_HC_PID_DATA1;
+ qtd->control_phase = DWC2_CONTROL_SETUP;
+ }
+
+ /* Start split */
+ qtd->complete_split = 0;
+ qtd->isoc_split_pos = DWC2_HCSPLT_XACTPOS_ALL;
+ qtd->isoc_split_offset = 0;
+ qtd->in_process = 0;
+
+ /* Store the qtd ptr in the urb to reference the QTD */
+ urb->qtd = qtd;
+}
+
+/**
+ * dwc2_hcd_qtd_add() - Adds a QTD to the QTD-list of a QH
+ *
+ * @hsotg: The DWC HCD structure
+ * @qtd: The QTD to add
+ * @qh: Out parameter to return queue head
+ * @atomic_alloc: Flag to do atomic alloc if needed
+ *
+ * Return: 0 if successful, negative error code otherwise
+ *
+ * Finds the correct QH to place the QTD into. If it does not find a QH, it
+ * will create a new QH. If the QH to which the QTD is added is not currently
+ * scheduled, it is placed into the proper schedule based on its EP type.
+ */
+int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
+ struct dwc2_qh **qh, gfp_t mem_flags)
+{
+ struct dwc2_hcd_urb *urb = qtd->urb;
+ unsigned long flags;
+ int allocated = 0;
+ int retval = 0;
+
+ /*
+ * Get the QH which holds the QTD-list to insert to. Create QH if it
+ * doesn't exist.
+ */
+ if (*qh == NULL) {
+ *qh = dwc2_hcd_qh_create(hsotg, urb, mem_flags);
+ if (*qh == NULL)
+ return -ENOMEM;
+ allocated = 1;
+ }
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ retval = dwc2_hcd_qh_add(hsotg, *qh);
+ if (retval && allocated) {
+ struct dwc2_qtd *qtd2, *qtd2_tmp;
+ struct dwc2_qh *qh_tmp = *qh;
+
+ *qh = NULL;
+ dwc2_hcd_qh_unlink(hsotg, qh_tmp);
+
+ /* Free each QTD in the QH's QTD list */
+ list_for_each_entry_safe(qtd2, qtd2_tmp, &qh_tmp->qtd_list,
+ qtd_list_entry)
+ dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh_tmp);
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ dwc2_hcd_qh_free(hsotg, qh_tmp);
+ } else {
+ qtd->qh = *qh;
+ list_add_tail(&qtd->qtd_list_entry, &(*qh)->qtd_list);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ }
+
+ return retval;
+}
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff