Use the new {max,min}3 macros to save some cycles and bytes on the stack.
This patch substitutes trivial nested macros with their counterpart.
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Joe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
int i, found = 0, __div = 0, __pdiv = 0;
/* Don't exceed the maximum rate */
- max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
- clk_xtali.rate / 4);
+ max_rate = max3(clk_pll1.rate / 4, clk_pll2.rate / 4, clk_xtali.rate / 4);
rate = min(rate, max_rate);
/*
* memory in this pool does not change.
*/
if (spare_needed && reserve_freed) {
- tmp = min(spare_needed, min(reserve_freed,
- (viodev->cmo.entitled -
- VIO_CMO_MIN_ENT)));
+ tmp = min3(spare_needed, reserve_freed, (viodev->cmo.entitled - VIO_CMO_MIN_ENT));
vio_cmo.spare += tmp;
viodev->cmo.entitled -= tmp;
l3->subcaches[3] = sc3 = !(val & BIT(12)) + !(val & BIT(13));
l3->indices = (max(max(max(sc0, sc1), sc2), sc3) << 10) - 1;
+ l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1;
}
static struct amd_l3_cache * __cpuinit amd_init_l3_cache(int node)
return -EINVAL;
while (size) {
- copy = min(drest, min(size, dst->length));
+ copy = min3(drest, size, dst->length);
size -= copy;
drest -= copy;
return -EINVAL;
while (size) {
- copy = min(srest, min(dst->length, size));
+ copy = min3(srest, dst->length, size);
daddr = kmap_atomic(sg_page(dst), KM_IRQ0);
memcpy(daddr + dst->offset + offset, saddr, copy);
ipoib_sendq_size = roundup_pow_of_two(ipoib_sendq_size);
ipoib_sendq_size = min(ipoib_sendq_size, IPOIB_MAX_QUEUE_SIZE);
- ipoib_sendq_size = max(ipoib_sendq_size, max(2 * MAX_SEND_CQE,
- IPOIB_MIN_QUEUE_SIZE));
+ ipoib_sendq_size = max3(ipoib_sendq_size, 2 * MAX_SEND_CQE, IPOIB_MIN_QUEUE_SIZE);
#ifdef CONFIG_INFINIBAND_IPOIB_CM
ipoib_max_conn_qp = min(ipoib_max_conn_qp, IPOIB_CM_MAX_CONN_QP);
#endif
new_min += correction->offset;
new_min = (new_min >> 16) + min;
- return max(new_setpoint, max(new_min, 0));
+ return max3(new_setpoint, new_min, 0);
}
static s32 pm121_connect(unsigned int control_id, s32 setpoint)
* clock can only be obtain by dividing this value by an even integer.
* Fallback to a slower pixel clock if necessary. */
pixclock = max((u32)(PICOS2KHZ(var->pixclock) * 1000), fbi->monspecs.dclkmin);
- pixclock = min(pixclock, min(fbi->monspecs.dclkmax, (u32)AU1200_LCD_MAX_CLK/2));
+ pixclock = min3(pixclock, fbi->monspecs.dclkmax, (u32)AU1200_LCD_MAX_CLK/2);
if (AU1200_LCD_MAX_CLK % pixclock) {
int diff = AU1200_LCD_MAX_CLK % pixclock;
struct array_cache *from, unsigned int max)
{
/* Figure out how many entries to transfer */
- int nr = min(min(from->avail, max), to->limit - to->avail);
+ int nr = min3(from->avail, max, to->limit - to->avail);
if (!nr)
return 0;