#define CMD_DEBUG_SET_MASK 0x34
#define CMD_DEBUG_SET_SELECT 0x36
+#define CMD_GRTC_READ_LO 0x42
+#define CMD_GRTC_READ_HI 0x43
+
#define CMD_IDU_ENABLE 0x71
#define CMD_IDU_DISABLE 0x72
#define CMD_IDU_SET_MODE 0x74
__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, 0xf);
__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
}
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_GRTC) && !mp.grtc)
+ panic("kernel trying to use non-existent GRTC\n");
}
#include <asm/clk.h>
#include <asm/mach_desc.h>
+#include <asm/mcip.h>
+
/* Timer related Aux registers */
#define ARC_REG_TIMER0_LIMIT 0x23 /* timer 0 limit */
#define ARC_REG_TIMER0_CTRL 0x22 /* timer 0 control */
/********** Clock Source Device *********/
+#ifdef CONFIG_ARC_HAS_GRTC
+
+static int arc_counter_setup(void)
+{
+ return 1;
+}
+
+static cycle_t arc_counter_read(struct clocksource *cs)
+{
+ unsigned long flags;
+ union {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ struct { u32 h, l; };
+#else
+ struct { u32 l, h; };
+#endif
+ cycle_t full;
+ } stamp;
+
+ local_irq_save(flags);
+
+ __mcip_cmd(CMD_GRTC_READ_LO, 0);
+ stamp.l = read_aux_reg(ARC_REG_MCIP_READBACK);
+
+ __mcip_cmd(CMD_GRTC_READ_HI, 0);
+ stamp.h = read_aux_reg(ARC_REG_MCIP_READBACK);
+
+ local_irq_restore(flags);
+
+ return stamp.full;
+}
+
+static struct clocksource arc_counter = {
+ .name = "ARConnect GRTC",
+ .rating = 400,
+ .read = arc_counter_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+#else
+
#ifdef CONFIG_ARC_HAS_RTC
#define AUX_RTC_CTRL 0x103
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+#endif
#endif
/********** Clock Event Device *********/