soc: qcom: Add device tree binding for Shared Memory Device

Add device tree binding documentation for the Qualcomm Shared Memory
Device, used for communication between the various CPUs in the Qualcomm
SoCs.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Andy Gross <agross@codeaurora.org>

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
new file mode 100644 (file)
index 0000000..f65c76d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
@@ -0,0 +1,79 @@
+Qualcomm Shared Memory Driver (SMD) binding
+
+This binding describes the Qualcomm Shared Memory Driver, a fifo based
+communication channel for sending data between the various subsystems in
+Qualcomm platforms.
+
+- compatible:
+       Usage: required
+       Value type: <stringlist>
+       Definition: must be "qcom,smd"
+
+= EDGES
+
+Each subnode of the SMD node represents a remote subsystem or a remote
+processor of some sort - or in SMD language an "edge". The name of the edges
+are not important.
+The edge is described by the following properties:
+
+- interrupts:
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: should specify the IRQ used by the remote processor to
+                   signal this processor about communication related updates
+
+- qcom,ipc:
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: three entries specifying the outgoing ipc bit used for
+                   signaling the remote processor:
+                   - phandle to a syscon node representing the apcs registers
+                   - u32 representing offset to the register within the syscon
+                   - u32 representing the ipc bit within the register
+
+- qcom,smd-edge:
+       Usage: required
+       Value type: <u32>
+       Definition: the identifier of the remote processor in the smd channel
+                   allocation table
+
+= SMD DEVICES
+
+In turn, subnodes of the "edges" represent devices tied to SMD channels on that
+"edge". The names of the devices are not important. The properties of these
+nodes are defined by the individual bindings for the SMD devices - but must
+contain the following property:
+
+- qcom,smd-channels:
+       Usage: required
+       Value type: <stringlist>
+       Definition: a list of channels tied to this device, used for matching
+                   the device to channels
+
+= EXAMPLE
+
+The following example represents a smd node, with one edge representing the
+"rpm" subsystem. For the "rpm" subsystem we have a device tied to the
+"rpm_request" channel.
+
+       apcs: syscon@f9011000 {
+               compatible = "syscon";
+               reg = <0xf9011000 0x1000>;
+       };
+
+       smd {
+               compatible = "qcom,smd";
+
+               rpm {
+                       interrupts = <0 168 1>;
+                       qcom,ipc = <&apcs 8 0>;
+                       qcom,smd-edge = <15>;
+
+                       rpm_requests {
+                               compatible = "qcom,rpm-msm8974";
+                               qcom,smd-channels = "rpm_requests";
+
+                               ...
+                       };
+               };
+       };