--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc2
+# Fri Feb 25 19:21:24 2005
+#
+CONFIG_FRAME_POINTER=y
+CONFIG_XTENSA=y
+# CONFIG_UID16 is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_GENERIC_HARDIRQS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_HOTPLUG is not set
+# CONFIG_KOBJECT_UEVENT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Processor type and features
+#
+CONFIG_XTENSA_ARCH_LINUX_BE=y
+# CONFIG_XTENSA_ARCH_LINUX_LE is not set
+# CONFIG_XTENSA_ARCH_LINUX_TEST is not set
+# CONFIG_XTENSA_ARCH_S5 is not set
+# CONFIG_XTENSA_CUSTOM is not set
+CONFIG_MMU=y
+# CONFIG_XTENSA_UNALIGNED_USER is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_HIGHMEM is not set
+
+#
+# Platform options
+#
+CONFIG_XTENSA_PLATFORM_ISS=y
+# CONFIG_XTENSA_PLATFORM_XT2000 is not set
+# CONFIG_XTENSA_PLATFORM_ARUBA is not set
+# CONFIG_XTENSA_CALIBRATE_CCOUNT is not set
+CONFIG_XTENSA_CPU_CLOCK=10
+# CONFIG_GENERIC_CALIBRATE_DELAY is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target"
+CONFIG_SERIAL_CONSOLE=y
+CONFIG_XTENSA_ISS_NETWORK=y
+
+#
+# Bus options
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Exectuable file formats
+#
+CONFIG_KCORE_ELF=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_IP_TCPDIAG is not set
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+# CONFIG_SCTP_HMAC_MD5 is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_SCH_CLK_JIFFIES is not set
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_NETDEVICES is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_I8042 is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+# CONFIG_EXPORTFS is not set
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set
--- /dev/null
+# $Id: Makefile,v 1.1.1.1 2002/08/28 16:10:14 aroll Exp $
+#
+# Makefile for the Xtensa Instruction Set Simulator (ISS)
+# "prom monitor" library routines under Linux.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+# Note 2! The CFLAGS definitions are in the main makefile...
+
+obj-y = io.o console.o setup.o network.o
+
--- /dev/null
+/*
+ * arch/xtensa/platform-iss/console.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001-2005 Tensilica Inc.
+ * Authors Christian Zankel, Joe Taylor
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/major.h>
+#include <linux/param.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/console.h>
+
+#include <asm/uaccess.h>
+#include <asm/irq.h>
+
+#include <xtensa/simcall.h>
+
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#ifdef SERIAL_INLINE
+#define _INLINE_ inline
+#endif
+
+#define SERIAL_MAX_NUM_LINES 1
+#define SERIAL_TIMER_VALUE (20 * HZ)
+
+static struct tty_driver *serial_driver;
+static struct timer_list serial_timer;
+
+static DEFINE_SPINLOCK(timer_lock);
+
+int errno;
+
+static int __simc (int a, int b, int c, int d, int e, int f)
+{
+ int ret;
+ __asm__ __volatile__ ("simcall\n"
+ "mov %0, a2\n"
+ "mov %1, a3\n" : "=a" (ret), "=a" (errno)
+ : : "a2", "a3");
+ return ret;
+}
+
+static char *serial_version = "0.1";
+static char *serial_name = "ISS serial driver";
+
+/*
+ * This routine is called whenever a serial port is opened. It
+ * enables interrupts for a serial port, linking in its async structure into
+ * the IRQ chain. It also performs the serial-specific
+ * initialization for the tty structure.
+ */
+
+static void rs_poll(unsigned long);
+
+static int rs_open(struct tty_struct *tty, struct file * filp)
+{
+ int line = tty->index;
+
+ if ((line < 0) || (line >= SERIAL_MAX_NUM_LINES))
+ return -ENODEV;
+
+ spin_lock(&timer_lock);
+
+ if (tty->count == 1) {
+ init_timer(&serial_timer);
+ serial_timer.data = (unsigned long) tty;
+ serial_timer.function = rs_poll;
+ mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
+ }
+ spin_unlock(&timer_lock);
+
+ return 0;
+}
+
+
+/*
+ * ------------------------------------------------------------
+ * iss_serial_close()
+ *
+ * This routine is called when the serial port gets closed. First, we
+ * wait for the last remaining data to be sent. Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ * ------------------------------------------------------------
+ */
+static void rs_close(struct tty_struct *tty, struct file * filp)
+{
+ spin_lock(&timer_lock);
+ if (tty->count == 1)
+ del_timer_sync(&serial_timer);
+ spin_unlock(&timer_lock);
+}
+
+
+static int rs_write(struct tty_struct * tty,
+ const unsigned char *buf, int count)
+{
+ /* see drivers/char/serialX.c to reference original version */
+
+ __simc (SYS_write, 1, (unsigned long)buf, count, 0, 0);
+ return count;
+}
+
+static void rs_poll(unsigned long priv)
+{
+ struct tty_struct* tty = (struct tty_struct*) priv;
+
+ struct timeval tv = { .tv_sec = 0, .tv_usec = 0 };
+ int i = 0;
+ unsigned char c;
+
+ spin_lock(&timer_lock);
+
+ while (__simc(SYS_select_one, 0, XTISS_SELECT_ONE_READ, (int)&tv,0,0)){
+ __simc (SYS_read, 0, (unsigned long)&c, 1, 0, 0);
+ tty->flip.count++;
+ *tty->flip.char_buf_ptr++ = c;
+ *tty->flip.flag_buf_ptr++ = TTY_NORMAL;
+ i++;
+ }
+
+ if (i)
+ tty_flip_buffer_push(tty);
+
+
+ mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
+ spin_unlock(&timer_lock);
+}
+
+
+static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+{
+ char buf[2];
+
+ if (!tty)
+ return;
+
+ buf[0] = ch;
+ buf[1] = '\0'; /* Is this NULL necessary? */
+ __simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0);
+}
+
+static void rs_flush_chars(struct tty_struct *tty)
+{
+}
+
+static int rs_write_room(struct tty_struct *tty)
+{
+ /* Let's say iss can always accept 2K characters.. */
+ return 2 * 1024;
+}
+
+static int rs_chars_in_buffer(struct tty_struct *tty)
+{
+ /* the iss doesn't buffer characters */
+ return 0;
+}
+
+static void rs_hangup(struct tty_struct *tty)
+{
+ /* Stub, once again.. */
+}
+
+static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ /* Stub, once again.. */
+}
+
+static int rs_read_proc(char *page, char **start, off_t off, int count,
+ int *eof, void *data)
+{
+ int len = 0;
+ off_t begin = 0;
+
+ len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version);
+ *eof = 1;
+
+ if (off >= len + begin)
+ return 0;
+
+ *start = page + (off - begin);
+ return ((count < begin + len - off) ? count : begin + len - off);
+}
+
+
+int register_serial(struct serial_struct*);
+void unregister_serial(int);
+
+static struct tty_operations serial_ops = {
+ .open = rs_open,
+ .close = rs_close,
+ .write = rs_write,
+ .put_char = rs_put_char,
+ .flush_chars = rs_flush_chars,
+ .write_room = rs_write_room,
+ .chars_in_buffer = rs_chars_in_buffer,
+ .hangup = rs_hangup,
+ .wait_until_sent = rs_wait_until_sent,
+ .read_proc = rs_read_proc
+};
+
+int __init rs_init(void)
+{
+ serial_driver = alloc_tty_driver(1);
+
+ printk ("%s %s\n", serial_name, serial_version);
+
+ /* Initialize the tty_driver structure */
+
+ serial_driver->owner = THIS_MODULE;
+ serial_driver->driver_name = "iss_serial";
+ serial_driver->name = "ttyS";
+ serial_driver->major = TTY_MAJOR;
+ serial_driver->minor_start = 64;
+ serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ serial_driver->subtype = SERIAL_TYPE_NORMAL;
+ serial_driver->init_termios = tty_std_termios;
+ serial_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->flags = TTY_DRIVER_REAL_RAW;
+
+ tty_set_operations(serial_driver, &serial_ops);
+
+ if (tty_register_driver(serial_driver))
+ panic("Couldn't register serial driver\n");
+ return 0;
+}
+
+
+static __exit void rs_exit(void)
+{
+ int error;
+
+ if ((error = tty_unregister_driver(serial_driver)))
+ printk("ISS_SERIAL: failed to unregister serial driver (%d)\n",
+ error);
+ put_tty_driver(serial_driver);
+}
+
+
+/* We use `late_initcall' instead of just `__initcall' as a workaround for
+ * the fact that (1) simcons_tty_init can't be called before tty_init,
+ * (2) tty_init is called via `module_init', (3) if statically linked,
+ * module_init == device_init, and (4) there's no ordering of init lists.
+ * We can do this easily because simcons is always statically linked, but
+ * other tty drivers that depend on tty_init and which must use
+ * `module_init' to declare their init routines are likely to be broken.
+ */
+
+late_initcall(rs_init);
+
+
+#ifdef CONFIG_SERIAL_CONSOLE
+
+static void iss_console_write(struct console *co, const char *s, unsigned count)
+{
+ int len = strlen(s);
+
+ if (s != 0 && *s != 0)
+ __simc (SYS_write, 1, (unsigned long)s,
+ count < len ? count : len,0,0);
+}
+
+static struct tty_driver* iss_console_device(struct console *c, int *index)
+{
+ *index = c->index;
+ return serial_driver;
+}
+
+
+static struct console sercons = {
+ .name = "ttyS",
+ .write = iss_console_write,
+ .device = iss_console_device,
+ .flags = CON_PRINTBUFFER,
+ .index = -1
+};
+
+static int __init iss_console_init(void)
+{
+ register_console(&sercons);
+ return 0;
+}
+
+console_initcall(iss_console_init);
+
+#endif /* CONFIG_SERIAL_CONSOLE */
+
--- /dev/null
+/* This file isn't really needed right now. */
+
+#if 0
+
+#include <asm/io.h>
+#include <xtensa/simcall.h>
+
+extern int __simc ();
+
+
+char iss_serial_getc()
+{
+ char c;
+ __simc( SYS_read, 0, &c, 1 );
+ return c;
+}
+
+void iss_serial_putc( char c )
+{
+ __simc( SYS_write, 1, &c, 1 );
+}
+
+void iss_serial_puts( char *s )
+{
+ if( s != 0 && *s != 0 )
+ __simc( SYS_write, 1, s, strlen(s) );
+}
+
+/*#error Need I/O ports to specific hardware!*/
+
+#endif
+
--- /dev/null
+/*
+ *
+ * arch/xtensa/platform-iss/network.c
+ *
+ * Platform specific initialization.
+ *
+ * Authors: Chris Zankel <chris@zankel.net>
+ * Based on work form the UML team.
+ *
+ * Copyright 2005 Tensilica Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/list.h>
+#include <linux/irq.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/if_ether.h>
+#include <linux/inetdevice.h>
+#include <linux/init.h>
+#include <linux/if_tun.h>
+#include <linux/etherdevice.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/bootmem.h>
+#include <linux/ethtool.h>
+#include <linux/rtnetlink.h>
+#include <linux/timer.h>
+
+#include <xtensa/simcall.h>
+
+#define DRIVER_NAME "iss-netdev"
+#define ETH_MAX_PACKET 1500
+#define ETH_HEADER_OTHER 14
+#define ISS_NET_TIMER_VALUE (2 * HZ)
+
+
+static DEFINE_SPINLOCK(opened_lock);
+static LIST_HEAD(opened);
+
+static DEFINE_SPINLOCK(devices_lock);
+static LIST_HEAD(devices);
+
+/* ------------------------------------------------------------------------- */
+
+/* We currently only support the TUNTAP transport protocol. */
+
+#define TRANSPORT_TUNTAP_NAME "tuntap"
+#define TRANSPORT_TUNTAP_MTU ETH_MAX_PACKET
+
+struct tuntap_info {
+ char dev_name[IFNAMSIZ];
+ int fixed_config;
+ unsigned char gw[ETH_ALEN];
+ int fd;
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/* This structure contains out private information for the driver. */
+
+struct iss_net_private {
+
+ struct list_head device_list;
+ struct list_head opened_list;
+
+ spinlock_t lock;
+ struct net_device *dev;
+ struct platform_device pdev;
+ struct timer_list tl;
+ struct net_device_stats stats;
+
+ struct timer_list timer;
+ unsigned int timer_val;
+
+ int index;
+ int mtu;
+
+ unsigned char mac[ETH_ALEN];
+ int have_mac;
+
+ struct {
+ union {
+ struct tuntap_info tuntap;
+ } info;
+
+ int (*open)(struct iss_net_private *lp);
+ void (*close)(struct iss_net_private *lp);
+ int (*read)(struct iss_net_private *lp, struct sk_buff **skb);
+ int (*write)(struct iss_net_private *lp, struct sk_buff **skb);
+ unsigned short (*protocol)(struct sk_buff *skb);
+ int (*poll)(struct iss_net_private *lp);
+ } tp;
+
+};
+
+/* ======================= ISS SIMCALL INTERFACE =========================== */
+
+/* Note: __simc must _not_ be declared inline! */
+
+static int errno;
+
+static int __simc (int a, int b, int c, int d, int e, int f)
+{
+ int ret;
+ __asm__ __volatile__ ("simcall\n"
+ "mov %0, a2\n"
+ "mov %1, a3\n" : "=a" (ret), "=a" (errno)
+ : : "a2", "a3");
+ return ret;
+}
+
+static int inline simc_open(char *file, int flags, int mode)
+{
+ return __simc(SYS_open, (int) file, flags, mode, 0, 0);
+}
+
+static int inline simc_close(int fd)
+{
+ return __simc(SYS_close, fd, 0, 0, 0, 0);
+}
+
+static int inline simc_ioctl(int fd, int request, void *arg)
+{
+ return __simc(SYS_ioctl, fd, request, (int) arg, 0, 0);
+}
+
+static int inline simc_read(int fd, void *buf, size_t count)
+{
+ return __simc(SYS_read, fd, (int) buf, count, 0, 0);
+}
+
+static int inline simc_write(int fd, void *buf, size_t count)
+{
+ return __simc(SYS_write, fd, (int) buf, count, 0, 0);
+}
+
+static int inline simc_poll(int fd)
+{
+ struct timeval tv = { .tv_sec = 0, .tv_usec = 0 };
+
+ return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&tv,0,0);
+}
+
+/* ================================ HELPERS ================================ */
+
+
+static char *split_if_spec(char *str, ...)
+{
+ char **arg, *end;
+ va_list ap;
+
+ va_start(ap, str);
+ while ((arg = va_arg(ap, char**)) != NULL) {
+ if (*str == '\0')
+ return NULL;
+ end = strchr(str, ',');
+ if (end != str)
+ *arg = str;
+ if (end == NULL)
+ return NULL;
+ *end ++ = '\0';
+ str = end;
+ }
+ va_end(ap);
+ return str;
+}
+
+
+#if 0
+/* Adjust SKB. */
+
+struct sk_buff *ether_adjust_skb(struct sk_buff *skb, int extra)
+{
+ if ((skb != NULL) && (skb_tailroom(skb) < extra)) {
+ struct sk_buff *skb2;
+
+ skb2 = skb_copy_expand(skb, 0, extra, GFP_ATOMIC);
+ dev_kfree_skb(skb);
+ skb = skb2;
+ }
+ if (skb != NULL)
+ skb_put(skb, extra);
+
+ return skb;
+}
+#endif
+
+/* Return the IP address as a string for a given device. */
+
+static void dev_ip_addr(void *d, char *buf, char *bin_buf)
+{
+ struct net_device *dev = d;
+ struct in_device *ip = dev->ip_ptr;
+ struct in_ifaddr *in;
+ u32 addr;
+
+ if ((ip == NULL) || ((in = ip->ifa_list) == NULL)) {
+ printk(KERN_WARNING "Device not assigned an IP address!\n");
+ return;
+ }
+
+ addr = in->ifa_address;
+ sprintf(buf, "%d.%d.%d.%d", addr & 0xff, (addr >> 8) & 0xff,
+ (addr >> 16) & 0xff, addr >> 24);
+
+ if (bin_buf) {
+ bin_buf[0] = addr & 0xff;
+ bin_buf[1] = (addr >> 8) & 0xff;
+ bin_buf[2] = (addr >> 16) & 0xff;
+ bin_buf[3] = addr >> 24;
+ }
+}
+
+/* Set Ethernet address of the specified device. */
+
+static void inline set_ether_mac(void *d, unsigned char *addr)
+{
+ struct net_device *dev = d;
+ memcpy(dev->dev_addr, addr, ETH_ALEN);
+}
+
+
+/* ======================= TUNTAP TRANSPORT INTERFACE ====================== */
+
+static int tuntap_open(struct iss_net_private *lp)
+{
+ struct ifreq ifr;
+ char *dev_name = lp->tp.info.tuntap.dev_name;
+ int err = -EINVAL;
+ int fd;
+
+ /* We currently only support a fixed configuration. */
+
+ if (!lp->tp.info.tuntap.fixed_config)
+ return -EINVAL;
+
+ if ((fd = simc_open("/dev/net/tun", 02, 0)) < 0) { /* O_RDWR */
+ printk("Failed to open /dev/net/tun, returned %d "
+ "(errno = %d)\n", fd, errno);
+ return fd;
+ }
+
+ memset(&ifr, 0, sizeof ifr);
+ ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
+ strlcpy(ifr.ifr_name, dev_name, sizeof ifr.ifr_name - 1);
+
+ if ((err = simc_ioctl(fd, TUNSETIFF, (void*) &ifr)) < 0) {
+ printk("Failed to set interface, returned %d "
+ "(errno = %d)\n", err, errno);
+ simc_close(fd);
+ return err;
+ }
+
+ lp->tp.info.tuntap.fd = fd;
+ return err;
+}
+
+static void tuntap_close(struct iss_net_private *lp)
+{
+#if 0
+ if (lp->tp.info.tuntap.fixed_config)
+ iter_addresses(lp->tp.info.tuntap.dev, close_addr, lp->host.dev_name);
+#endif
+ simc_close(lp->tp.info.tuntap.fd);
+ lp->tp.info.tuntap.fd = -1;
+}
+
+static int tuntap_read (struct iss_net_private *lp, struct sk_buff **skb)
+{
+#if 0
+ *skb = ether_adjust_skb(*skb, ETH_HEADER_OTHER);
+ if (*skb == NULL)
+ return -ENOMEM;
+#endif
+
+ return simc_read(lp->tp.info.tuntap.fd,
+ (*skb)->data, (*skb)->dev->mtu + ETH_HEADER_OTHER);
+}
+
+static int tuntap_write (struct iss_net_private *lp, struct sk_buff **skb)
+{
+ return simc_write(lp->tp.info.tuntap.fd, (*skb)->data, (*skb)->len);
+}
+
+unsigned short tuntap_protocol(struct sk_buff *skb)
+{
+ return eth_type_trans(skb, skb->dev);
+}
+
+static int tuntap_poll(struct iss_net_private *lp)
+{
+ return simc_poll(lp->tp.info.tuntap.fd);
+}
+
+/*
+ * Currently only a device name is supported.
+ * ethX=tuntap[,[mac address][,[device name]]]
+ */
+
+static int tuntap_probe(struct iss_net_private *lp, int index, char *init)
+{
+ const int len = strlen(TRANSPORT_TUNTAP_NAME);
+ char *dev_name = NULL, *mac_str = NULL, *rem = NULL;
+
+ /* Transport should be 'tuntap': ethX=tuntap,mac,dev_name */
+
+ if (strncmp(init, TRANSPORT_TUNTAP_NAME, len))
+ return 0;
+
+ if (*(init += strlen(TRANSPORT_TUNTAP_NAME)) == ',') {
+ if ((rem=split_if_spec(init+1, &mac_str, &dev_name)) != NULL) {
+ printk("Extra garbage on specification : '%s'\n", rem);
+ return 0;
+ }
+ } else if (*init != '\0') {
+ printk("Invalid argument: %s. Skipping device!\n", init);
+ return 0;
+ }
+
+ if (dev_name) {
+ strncpy(lp->tp.info.tuntap.dev_name, dev_name,
+ sizeof lp->tp.info.tuntap.dev_name);
+ lp->tp.info.tuntap.fixed_config = 1;
+ } else
+ strcpy(lp->tp.info.tuntap.dev_name, TRANSPORT_TUNTAP_NAME);
+
+
+#if 0
+ if (setup_etheraddr(mac_str, lp->mac))
+ lp->have_mac = 1;
+#endif
+ lp->mtu = TRANSPORT_TUNTAP_MTU;
+
+ //lp->info.tuntap.gate_addr = gate_addr;
+
+ lp->tp.info.tuntap.fd = -1;
+
+ lp->tp.open = tuntap_open;
+ lp->tp.close = tuntap_close;
+ lp->tp.read = tuntap_read;
+ lp->tp.write = tuntap_write;
+ lp->tp.protocol = tuntap_protocol;
+ lp->tp.poll = tuntap_poll;
+
+ printk("TUN/TAP backend - ");
+#if 0
+ if (lp->host.gate_addr != NULL)
+ printk("IP = %s", lp->host.gate_addr);
+#endif
+ printk("\n");
+
+ return 1;
+}
+
+/* ================================ ISS NET ================================ */
+
+static int iss_net_rx(struct net_device *dev)
+{
+ struct iss_net_private *lp = dev->priv;
+ int pkt_len;
+ struct sk_buff *skb;
+
+ /* Check if there is any new data. */
+
+ if (lp->tp.poll(lp) == 0)
+ return 0;
+
+ /* Try to allocate memory, if it fails, try again next round. */
+
+ if ((skb = dev_alloc_skb(dev->mtu + 2 + ETH_HEADER_OTHER)) == NULL) {
+ lp->stats.rx_dropped++;
+ return 0;
+ }
+
+ skb_reserve(skb, 2);
+
+ /* Setup skb */
+
+ skb->dev = dev;
+ skb->mac.raw = skb->data;
+ pkt_len = lp->tp.read(lp, &skb);
+ skb_put(skb, pkt_len);
+
+ if (pkt_len > 0) {
+ skb_trim(skb, pkt_len);
+ skb->protocol = lp->tp.protocol(skb);
+ // netif_rx(skb);
+ netif_rx_ni(skb);
+
+ lp->stats.rx_bytes += skb->len;
+ lp->stats.rx_packets++;
+ return pkt_len;
+ }
+ kfree_skb(skb);
+ return pkt_len;
+}
+
+static int iss_net_poll(void)
+{
+ struct list_head *ele;
+ int err, ret = 0;
+
+ spin_lock(&opened_lock);
+
+ list_for_each(ele, &opened) {
+ struct iss_net_private *lp;
+
+ lp = list_entry(ele, struct iss_net_private, opened_list);
+
+ if (!netif_running(lp->dev))
+ break;
+
+ spin_lock(&lp->lock);
+
+ while ((err = iss_net_rx(lp->dev)) > 0)
+ ret++;
+
+ spin_unlock(&lp->lock);
+
+ if (err < 0) {
+ printk(KERN_ERR "Device '%s' read returned %d, "
+ "shutting it down\n", lp->dev->name, err);
+ dev_close(lp->dev);
+ } else {
+ // FIXME reactivate_fd(lp->fd, ISS_ETH_IRQ);
+ }
+ }
+
+ spin_unlock(&opened_lock);
+ return ret;
+}
+
+
+static void iss_net_timer(unsigned long priv)
+{
+ struct iss_net_private* lp = (struct iss_net_private*) priv;
+
+ spin_lock(&lp->lock);
+
+ iss_net_poll();
+
+ mod_timer(&lp->timer, jiffies + lp->timer_val);
+
+ spin_unlock(&lp->lock);
+}
+
+
+static int iss_net_open(struct net_device *dev)
+{
+ struct iss_net_private *lp = dev->priv;
+ char addr[sizeof "255.255.255.255\0"];
+ int err;
+
+ spin_lock(&lp->lock);
+
+ if ((err = lp->tp.open(lp)) < 0)
+ goto out;
+
+ if (!lp->have_mac) {
+ dev_ip_addr(dev, addr, &lp->mac[2]);
+ set_ether_mac(dev, lp->mac);
+ }
+
+ netif_start_queue(dev);
+
+ /* clear buffer - it can happen that the host side of the interface
+ * is full when we gethere. In this case, new data is never queued,
+ * SIGIOs never arrive, and the net never works.
+ */
+ while ((err = iss_net_rx(dev)) > 0)
+ ;
+
+ spin_lock(&opened_lock);
+ list_add(&lp->opened_list, &opened);
+ spin_unlock(&opened_lock);
+
+ init_timer(&lp->timer);
+ lp->timer_val = ISS_NET_TIMER_VALUE;
+ lp->timer.data = (unsigned long) lp;
+ lp->timer.function = iss_net_timer;
+ mod_timer(&lp->timer, jiffies + lp->timer_val);
+
+out:
+ spin_unlock(&lp->lock);
+ return err;
+}
+
+static int iss_net_close(struct net_device *dev)
+{
+ struct iss_net_private *lp = dev->priv;
+printk("iss_net_close!\n");
+ netif_stop_queue(dev);
+ spin_lock(&lp->lock);
+
+ spin_lock(&opened_lock);
+ list_del(&opened);
+ spin_unlock(&opened_lock);
+
+ del_timer_sync(&lp->timer);
+
+ lp->tp.close(lp);
+
+ spin_unlock(&lp->lock);
+ return 0;
+}
+
+static int iss_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct iss_net_private *lp = dev->priv;
+ unsigned long flags;
+ int len;
+
+ netif_stop_queue(dev);
+ spin_lock_irqsave(&lp->lock, flags);
+
+ len = lp->tp.write(lp, &skb);
+
+ if (len == skb->len) {
+ lp->stats.tx_packets++;
+ lp->stats.tx_bytes += skb->len;
+ dev->trans_start = jiffies;
+ netif_start_queue(dev);
+
+ /* this is normally done in the interrupt when tx finishes */
+ netif_wake_queue(dev);
+
+ } else if (len == 0) {
+ netif_start_queue(dev);
+ lp->stats.tx_dropped++;
+
+ } else {
+ netif_start_queue(dev);
+ printk(KERN_ERR "iss_net_start_xmit: failed(%d)\n", len);
+ }
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ dev_kfree_skb(skb);
+ return 0;
+}
+
+
+static struct net_device_stats *iss_net_get_stats(struct net_device *dev)
+{
+ struct iss_net_private *lp = dev->priv;
+ return &lp->stats;
+}
+
+static void iss_net_set_multicast_list(struct net_device *dev)
+{
+#if 0
+ if (dev->flags & IFF_PROMISC)
+ return;
+ else if (dev->mc_count)
+ dev->flags |= IFF_ALLMULTI;
+ else
+ dev->flags &= ~IFF_ALLMULTI;
+#endif
+}
+
+static void iss_net_tx_timeout(struct net_device *dev)
+{
+#if 0
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+#endif
+}
+
+static int iss_net_set_mac(struct net_device *dev, void *addr)
+{
+#if 0
+ struct iss_net_private *lp = dev->priv;
+ struct sockaddr *hwaddr = addr;
+
+ spin_lock(&lp->lock);
+ memcpy(dev->dev_addr, hwaddr->sa_data, ETH_ALEN);
+ spin_unlock(&lp->lock);
+#endif
+
+ return 0;
+}
+
+static int iss_net_change_mtu(struct net_device *dev, int new_mtu)
+{
+#if 0
+ struct iss_net_private *lp = dev->priv;
+ int err = 0;
+
+ spin_lock(&lp->lock);
+
+ // FIXME not needed new_mtu = transport_set_mtu(new_mtu, &lp->user);
+
+ if (new_mtu < 0)
+ err = new_mtu;
+ else
+ dev->mtu = new_mtu;
+
+ spin_unlock(&lp->lock);
+ return err;
+#endif
+ return -EINVAL;
+}
+
+static int iss_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+#if 0
+ static const struct ethtool_drvinfo info = {
+ .cmd = ETHTOOL_GDRVINFO,
+ .driver = DRIVER_NAME,
+ .version = "42",
+ };
+ void *useraddr;
+ u32 ethcmd;
+
+ switch (cmd) {
+ case SIOCETHTOOL:
+ useraddr = ifr->ifr_data;
+ if (copy_from_user(ðcmd, useraddr, sizeof(ethcmd)))
+ return -EFAULT;
+
+ switch (ethcmd) {
+ case ETHTOOL_GDRVINFO:
+ if (copy_to_user(useraddr, &info, sizeof(info)))
+ return -EFAULT;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+ default:
+ return -EINVAL;
+ }
+#endif
+ return -EINVAL;
+}
+
+void iss_net_user_timer_expire(unsigned long _conn)
+{
+}
+
+
+static struct device_driver iss_net_driver = {
+ .name = DRIVER_NAME,
+ .bus = &platform_bus_type,
+};
+
+static int driver_registered;
+
+static int iss_net_configure(int index, char *init)
+{
+ struct net_device *dev;
+ struct iss_net_private *lp;
+ int err;
+
+ if ((dev = alloc_etherdev(sizeof *lp)) == NULL) {
+ printk(KERN_ERR "eth_configure: failed to allocate device\n");
+ return 1;
+ }
+
+ /* Initialize private element. */
+
+ lp = dev->priv;
+ *lp = ((struct iss_net_private) {
+ .device_list = LIST_HEAD_INIT(lp->device_list),
+ .opened_list = LIST_HEAD_INIT(lp->opened_list),
+ .lock = SPIN_LOCK_UNLOCKED,
+ .dev = dev,
+ .index = index,
+ //.fd = -1,
+ .mac = { 0xfe, 0xfd, 0x0, 0x0, 0x0, 0x0 },
+ .have_mac = 0,
+ });
+
+ /*
+ * Try all transport protocols.
+ * Note: more protocols can be added by adding '&& !X_init(lp, eth)'.
+ */
+
+ if (!tuntap_probe(lp, index, init)) {
+ printk("Invalid arguments. Skipping device!\n");
+ goto errout;
+ }
+
+ printk(KERN_INFO "Netdevice %d ", index);
+ if (lp->have_mac)
+ printk("(%02x:%02x:%02x:%02x:%02x:%02x) ",
+ lp->mac[0], lp->mac[1],
+ lp->mac[2], lp->mac[3],
+ lp->mac[4], lp->mac[5]);
+ printk(": ");
+
+ /* sysfs register */
+
+ if (!driver_registered) {
+ driver_register(&iss_net_driver);
+ driver_registered = 1;
+ }
+
+ spin_lock(&devices_lock);
+ list_add(&lp->device_list, &devices);
+ spin_unlock(&devices_lock);
+
+ lp->pdev.id = index;
+ lp->pdev.name = DRIVER_NAME;
+ platform_device_register(&lp->pdev);
+ SET_NETDEV_DEV(dev,&lp->pdev.dev);
+
+ /*
+ * If this name ends up conflicting with an existing registered
+ * netdevice, that is OK, register_netdev{,ice}() will notice this
+ * and fail.
+ */
+ snprintf(dev->name, sizeof dev->name, "eth%d", index);
+
+ dev->mtu = lp->mtu;
+ dev->open = iss_net_open;
+ dev->hard_start_xmit = iss_net_start_xmit;
+ dev->stop = iss_net_close;
+ dev->get_stats = iss_net_get_stats;
+ dev->set_multicast_list = iss_net_set_multicast_list;
+ dev->tx_timeout = iss_net_tx_timeout;
+ dev->set_mac_address = iss_net_set_mac;
+ dev->change_mtu = iss_net_change_mtu;
+ dev->do_ioctl = iss_net_ioctl;
+ dev->watchdog_timeo = (HZ >> 1);
+ dev->irq = -1;
+
+ rtnl_lock();
+ err = register_netdevice(dev);
+ rtnl_unlock();
+
+ if (err) {
+ printk("Error registering net device!\n");
+ /* XXX: should we call ->remove() here? */
+ free_netdev(dev);
+ return 1;
+ }
+
+ init_timer(&lp->tl);
+ lp->tl.function = iss_net_user_timer_expire;
+
+#if 0
+ if (lp->have_mac)
+ set_ether_mac(dev, lp->mac);
+#endif
+ return 0;
+
+errout:
+ // FIXME: unregister; free, etc..
+ return -EIO;
+
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* Filled in during early boot */
+
+struct list_head eth_cmd_line = LIST_HEAD_INIT(eth_cmd_line);
+
+struct iss_net_init {
+ struct list_head list;
+ char *init; /* init string */
+ int index;
+};
+
+/*
+ * Parse the command line and look for 'ethX=...' fields, and register all
+ * those fields. They will be later initialized in iss_net_init.
+ */
+
+#define ERR KERN_ERR "iss_net_setup: "
+
+static int iss_net_setup(char *str)
+{
+ struct iss_net_private *device = NULL;
+ struct iss_net_init *new;
+ struct list_head *ele;
+ char *end;
+ int n;
+
+ n = simple_strtoul(str, &end, 0);
+ if (end == str) {
+ printk(ERR "Failed to parse '%s'\n", str);
+ return 1;
+ }
+ if (n < 0) {
+ printk(ERR "Device %d is negative\n", n);
+ return 1;
+ }
+ if (*(str = end) != '=') {
+ printk(ERR "Expected '=' after device number\n");
+ return 1;
+ }
+
+ spin_lock(&devices_lock);
+
+ list_for_each(ele, &devices) {
+ device = list_entry(ele, struct iss_net_private, device_list);
+ if (device->index == n)
+ break;
+ }
+
+ spin_unlock(&devices_lock);
+
+ if (device && device->index == n) {
+ printk(ERR "Device %d already configured\n", n);
+ return 1;
+ }
+
+ if ((new = alloc_bootmem(sizeof new)) == NULL) {
+ printk("Alloc_bootmem failed\n");
+ return 1;
+ }
+
+ INIT_LIST_HEAD(&new->list);
+ new->index = n;
+ new->init = str + 1;
+
+ list_add_tail(&new->list, ð_cmd_line);
+ return 1;
+}
+
+#undef ERR
+
+__setup("eth", iss_net_setup);
+
+/*
+ * Initialize all ISS Ethernet devices previously registered in iss_net_setup.
+ */
+
+static int iss_net_init(void)
+{
+ struct list_head *ele, *next;
+
+ /* Walk through all Ethernet devices specified in the command line. */
+
+ list_for_each_safe(ele, next, ð_cmd_line) {
+ struct iss_net_init *eth;
+ eth = list_entry(ele, struct iss_net_init, list);
+ iss_net_configure(eth->index, eth->init);
+ }
+
+ return 1;
+}
+
+module_init(iss_net_init);
+
--- /dev/null
+/*
+ *
+ * arch/xtensa/platform-iss/setup.c
+ *
+ * Platform specific initialization.
+ *
+ * Authors: Chris Zankel <chris@zankel.net>
+ * Joe Taylor <joe@tensilica.com>
+ *
+ * Copyright 2001 - 2005 Tensilica Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/stringify.h>
+#include <linux/notifier.h>
+
+#include <asm/platform.h>
+#include <asm/bootparam.h>
+
+
+void __init platform_init(bp_tag_t* bootparam)
+{
+
+}
+
+void platform_halt(void)
+{
+ printk (" ** Called platform_halt(), looping forever! **\n");
+ while (1);
+}
+
+void platform_power_off(void)
+{
+ printk (" ** Called platform_power_off(), looping forever! **\n");
+ while (1);
+}
+void platform_restart(void)
+{
+ /* Flush and reset the mmu, simulate a processor reset, and
+ * jump to the reset vector. */
+
+ __asm__ __volatile__("movi a2, 15\n\t"
+ "wsr a2, " __stringify(ICOUNTLEVEL) "\n\t"
+ "movi a2, 0\n\t"
+ "wsr a2, " __stringify(ICOUNT) "\n\t"
+ "wsr a2, " __stringify(IBREAKENABLE) "\n\t"
+ "wsr a2, " __stringify(LCOUNT) "\n\t"
+ "movi a2, 0x1f\n\t"
+ "wsr a2, " __stringify(PS) "\n\t"
+ "isync\n\t"
+ "jx %0\n\t"
+ :
+ : "a" (XCHAL_RESET_VECTOR_VADDR)
+ : "a2");
+
+ /* control never gets here */
+}
+
+extern void iss_net_poll(void);
+
+const char twirl[]="|/-\\|/-\\";
+
+void platform_heartbeat(void)
+{
+#if 0
+ static int i = 0, j = 0;
+
+ if (--i < 0) {
+ i = 99;
+ printk("\r%c\r", twirl[j++]);
+ if (j == 8)
+ j = 0;
+ }
+#endif
+}
+
+
+
+static int
+iss_panic_event(struct notifier_block *this, unsigned long event, void *ptr)
+{
+ __asm__ __volatile__("movi a2, -1; simcall\n");
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block iss_panic_block = {
+ iss_panic_event,
+ NULL,
+ 0
+};
+
+void __init platform_setup(char **p_cmdline)
+{
+ notifier_chain_register(&panic_notifier_list, &iss_panic_block);
+}
--- /dev/null
+/*
+ * include/asm-xtensa/platform-iss/hardware.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 Tensilica Inc.
+ */
+
+/*
+ * This file contains the default configuration of ISS.
+ */
+
+#ifndef __ASM_XTENSA_ISS_HARDWARE
+#define __ASM_XTENSA_ISS_HARDWARE
+
+/*
+ * Memory configuration.
+ */
+
+#define PLATFORM_DEFAULT_MEM_START XSHAL_RAM_PADDR
+#define PLATFORM_DEFAULT_MEM_SIZE XSHAL_RAM_VSIZE
+
+/*
+ * Interrupt configuration.
+ */
+
+#endif /* __ASM_XTENSA_ISS_HARDWARE */
--- /dev/null
+/*
+ * include/asm-xtensa/platform.h
+ *
+ * Platform specific functions
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_PLATFORM_H
+#define _XTENSA_PLATFORM_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+
+#include <asm/bootparam.h>
+
+/*
+ * platform_init is called before the mmu is initialized to give the
+ * platform a early hook-up. bp_tag_t is a list of configuration tags
+ * passed from the boot-loader.
+ */
+extern void platform_init(bp_tag_t*);
+
+/*
+ * platform_setup is called from setup_arch with a pointer to the command-line
+ * string.
+ */
+extern void platform_setup (char **);
+
+/*
+ * platform_init_irq is called from init_IRQ.
+ */
+extern void platform_init_irq (void);
+
+/*
+ * platform_restart is called to restart the system.
+ */
+extern void platform_restart (void);
+
+/*
+ * platform_halt is called to stop the system and halt.
+ */
+extern void platform_halt (void);
+
+/*
+ * platform_power_off is called to stop the system and power it off.
+ */
+extern void platform_power_off (void);
+
+/*
+ * platform_idle is called from the idle function.
+ */
+extern void platform_idle (void);
+
+/*
+ * platform_heartbeat is called every HZ
+ */
+extern void platform_heartbeat (void);
+
+/*
+ * platform_pcibios_init is called to allow the platform to setup the pci bus.
+ */
+extern void platform_pcibios_init (void);
+
+/*
+ * platform_pcibios_fixup allows to modify the PCI configuration.
+ */
+extern int platform_pcibios_fixup (void);
+
+/*
+ * platform_calibrate_ccount calibrates cpu clock freq (CONFIG_XTENSA_CALIBRATE)
+ */
+extern void platform_calibrate_ccount (void);
+
+/*
+ * platform_get_rtc_time returns RTC seconds (returns 0 for no error)
+ */
+extern int platform_get_rtc_time(time_t*);
+
+/*
+ * platform_set_rtc_time set RTC seconds (returns 0 for no error)
+ */
+extern int platform_set_rtc_time(time_t);
+
+
+#endif /* _XTENSA_PLATFORM_H */
+
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff