/*
- * Copyright © 2006 Intel Corporation
+ * Copyright © 2016 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
- *
- * Authors:
- * Eric Anholt <eric@anholt.net>
- *
- */
-
-#ifndef _INTEL_BIOS_H_
-#define _INTEL_BIOS_H_
-
-/**
- * struct vbt_header - VBT Header structure
- * @signature: VBT signature, always starts with "$VBT"
- * @version: Version of this structure
- * @header_size: Size of this structure
- * @vbt_size: Size of VBT (VBT Header, BDB Header and data blocks)
- * @vbt_checksum: Checksum
- * @reserved0: Reserved
- * @bdb_offset: Offset of &struct bdb_header from beginning of VBT
- * @aim_offset: Offsets of add-in data blocks from beginning of VBT
- */
-struct vbt_header {
- u8 signature[20];
- u16 version;
- u16 header_size;
- u16 vbt_size;
- u8 vbt_checksum;
- u8 reserved0;
- u32 bdb_offset;
- u32 aim_offset[4];
-} __packed;
-
-/**
- * struct bdb_header - BDB Header structure
- * @signature: BDB signature "BIOS_DATA_BLOCK"
- * @version: Version of the data block definitions
- * @header_size: Size of this structure
- * @bdb_size: Size of BDB (BDB Header and data blocks)
- */
-struct bdb_header {
- u8 signature[16];
- u16 version;
- u16 header_size;
- u16 bdb_size;
-} __packed;
-
-/* strictly speaking, this is a "skip" block, but it has interesting info */
-struct vbios_data {
- u8 type; /* 0 == desktop, 1 == mobile */
- u8 relstage;
- u8 chipset;
- u8 lvds_present:1;
- u8 tv_present:1;
- u8 rsvd2:6; /* finish byte */
- u8 rsvd3[4];
- u8 signon[155];
- u8 copyright[61];
- u16 code_segment;
- u8 dos_boot_mode;
- u8 bandwidth_percent;
- u8 rsvd4; /* popup memory size */
- u8 resize_pci_bios;
- u8 rsvd5; /* is crt already on ddc2 */
-} __packed;
-
-/*
- * There are several types of BIOS data blocks (BDBs), each block has
- * an ID and size in the first 3 bytes (ID in first, size in next 2).
- * Known types are listed below.
*/
-#define BDB_GENERAL_FEATURES 1
-#define BDB_GENERAL_DEFINITIONS 2
-#define BDB_OLD_TOGGLE_LIST 3
-#define BDB_MODE_SUPPORT_LIST 4
-#define BDB_GENERIC_MODE_TABLE 5
-#define BDB_EXT_MMIO_REGS 6
-#define BDB_SWF_IO 7
-#define BDB_SWF_MMIO 8
-#define BDB_PSR 9
-#define BDB_MODE_REMOVAL_TABLE 10
-#define BDB_CHILD_DEVICE_TABLE 11
-#define BDB_DRIVER_FEATURES 12
-#define BDB_DRIVER_PERSISTENCE 13
-#define BDB_EXT_TABLE_PTRS 14
-#define BDB_DOT_CLOCK_OVERRIDE 15
-#define BDB_DISPLAY_SELECT 16
-/* 17 rsvd */
-#define BDB_DRIVER_ROTATION 18
-#define BDB_DISPLAY_REMOVE 19
-#define BDB_OEM_CUSTOM 20
-#define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */
-#define BDB_SDVO_LVDS_OPTIONS 22
-#define BDB_SDVO_PANEL_DTDS 23
-#define BDB_SDVO_LVDS_PNP_IDS 24
-#define BDB_SDVO_LVDS_POWER_SEQ 25
-#define BDB_TV_OPTIONS 26
-#define BDB_EDP 27
-#define BDB_LVDS_OPTIONS 40
-#define BDB_LVDS_LFP_DATA_PTRS 41
-#define BDB_LVDS_LFP_DATA 42
-#define BDB_LVDS_BACKLIGHT 43
-#define BDB_LVDS_POWER 44
-#define BDB_MIPI_CONFIG 52
-#define BDB_MIPI_SEQUENCE 53
-#define BDB_SKIP 254 /* VBIOS private block, ignore */
-
-struct bdb_general_features {
- /* bits 1 */
- u8 panel_fitting:2;
- u8 flexaim:1;
- u8 msg_enable:1;
- u8 clear_screen:3;
- u8 color_flip:1;
-
- /* bits 2 */
- u8 download_ext_vbt:1;
- u8 enable_ssc:1;
- u8 ssc_freq:1;
- u8 enable_lfp_on_override:1;
- u8 disable_ssc_ddt:1;
- u8 rsvd7:1;
- u8 display_clock_mode:1;
- u8 rsvd8:1; /* finish byte */
-
- /* bits 3 */
- u8 disable_smooth_vision:1;
- u8 single_dvi:1;
- u8 rsvd9:1;
- u8 fdi_rx_polarity_inverted:1;
- u8 rsvd10:4; /* finish byte */
-
- /* bits 4 */
- u8 legacy_monitor_detect;
-
- /* bits 5 */
- u8 int_crt_support:1;
- u8 int_tv_support:1;
- u8 int_efp_support:1;
- u8 dp_ssc_enb:1; /* PCH attached eDP supports SSC */
- u8 dp_ssc_freq:1; /* SSC freq for PCH attached eDP */
- u8 rsvd11:3; /* finish byte */
-} __packed;
-
-/* pre-915 */
-#define GPIO_PIN_DVI_LVDS 0x03 /* "DVI/LVDS DDC GPIO pins" */
-#define GPIO_PIN_ADD_I2C 0x05 /* "ADDCARD I2C GPIO pins" */
-#define GPIO_PIN_ADD_DDC 0x04 /* "ADDCARD DDC GPIO pins" */
-#define GPIO_PIN_ADD_DDC_I2C 0x06 /* "ADDCARD DDC/I2C GPIO pins" */
-
-/* Pre 915 */
-#define DEVICE_TYPE_NONE 0x00
-#define DEVICE_TYPE_CRT 0x01
-#define DEVICE_TYPE_TV 0x09
-#define DEVICE_TYPE_EFP 0x12
-#define DEVICE_TYPE_LFP 0x22
-/* On 915+ */
-#define DEVICE_TYPE_CRT_DPMS 0x6001
-#define DEVICE_TYPE_CRT_DPMS_HOTPLUG 0x4001
-#define DEVICE_TYPE_TV_COMPOSITE 0x0209
-#define DEVICE_TYPE_TV_MACROVISION 0x0289
-#define DEVICE_TYPE_TV_RF_COMPOSITE 0x020c
-#define DEVICE_TYPE_TV_SVIDEO_COMPOSITE 0x0609
-#define DEVICE_TYPE_TV_SCART 0x0209
-#define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009
-#define DEVICE_TYPE_EFP_HOTPLUG_PWR 0x6012
-#define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR 0x6052
-#define DEVICE_TYPE_EFP_DVI_I 0x6053
-#define DEVICE_TYPE_EFP_DVI_D_DUAL 0x6152
-#define DEVICE_TYPE_EFP_DVI_D_HDCP 0x60d2
-#define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR 0x6062
-#define DEVICE_TYPE_OPENLDI_DUALPIX 0x6162
-#define DEVICE_TYPE_LFP_PANELLINK 0x5012
-#define DEVICE_TYPE_LFP_CMOS_PWR 0x5042
-#define DEVICE_TYPE_LFP_LVDS_PWR 0x5062
-#define DEVICE_TYPE_LFP_LVDS_DUAL 0x5162
-#define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP 0x51e2
-
-#define DEVICE_CFG_NONE 0x00
-#define DEVICE_CFG_12BIT_DVOB 0x01
-#define DEVICE_CFG_12BIT_DVOC 0x02
-#define DEVICE_CFG_24BIT_DVOBC 0x09
-#define DEVICE_CFG_24BIT_DVOCB 0x0a
-#define DEVICE_CFG_DUAL_DVOB 0x11
-#define DEVICE_CFG_DUAL_DVOC 0x12
-#define DEVICE_CFG_DUAL_DVOBC 0x13
-#define DEVICE_CFG_DUAL_LINK_DVOBC 0x19
-#define DEVICE_CFG_DUAL_LINK_DVOCB 0x1a
-
-#define DEVICE_WIRE_NONE 0x00
-#define DEVICE_WIRE_DVOB 0x01
-#define DEVICE_WIRE_DVOC 0x02
-#define DEVICE_WIRE_DVOBC 0x03
-#define DEVICE_WIRE_DVOBB 0x05
-#define DEVICE_WIRE_DVOCC 0x06
-#define DEVICE_WIRE_DVOB_MASTER 0x0d
-#define DEVICE_WIRE_DVOC_MASTER 0x0e
-
-#define DEVICE_PORT_DVOA 0x00 /* none on 845+ */
-#define DEVICE_PORT_DVOB 0x01
-#define DEVICE_PORT_DVOC 0x02
/*
- * We used to keep this struct but without any version control. We should avoid
- * using it in the future, but it should be safe to keep using it in the old
- * code. Do not change; we rely on its size.
+ * Please use intel_vbt_defs.h for VBT private data, to hide and abstract away
+ * the VBT from the rest of the driver. Add the parsed, clean data to struct
+ * intel_vbt_data within struct drm_i915_private.
*/
-struct old_child_dev_config {
- u16 handle;
- u16 device_type;
- u8 device_id[10]; /* ascii string */
- u16 addin_offset;
- u8 dvo_port; /* See Device_PORT_* above */
- u8 i2c_pin;
- u8 slave_addr;
- u8 ddc_pin;
- u16 edid_ptr;
- u8 dvo_cfg; /* See DEVICE_CFG_* above */
- u8 dvo2_port;
- u8 i2c2_pin;
- u8 slave2_addr;
- u8 ddc2_pin;
- u8 capabilities;
- u8 dvo_wiring;/* See DEVICE_WIRE_* above */
- u8 dvo2_wiring;
- u16 extended_type;
- u8 dvo_function;
-} __packed;
-
-/* This one contains field offsets that are known to be common for all BDB
- * versions. Notice that the meaning of the contents contents may still change,
- * but at least the offsets are consistent. */
-
-/* Definitions for flags_1 */
-#define IBOOST_ENABLE (1<<3)
-
-struct common_child_dev_config {
- u16 handle;
- u16 device_type;
- u8 not_common1[12];
- u8 dvo_port;
- u8 not_common2[2];
- u8 ddc_pin;
- u16 edid_ptr;
- u8 obsolete;
- u8 flags_1;
- u8 not_common3[13];
- u8 iboost_level;
-} __packed;
-
-
-/* This field changes depending on the BDB version, so the most reliable way to
- * read it is by checking the BDB version and reading the raw pointer. */
-union child_device_config {
- /* This one is safe to be used anywhere, but the code should still check
- * the BDB version. */
- u8 raw[33];
- /* This one should only be kept for legacy code. */
- struct old_child_dev_config old;
- /* This one should also be safe to use anywhere, even without version
- * checks. */
- struct common_child_dev_config common;
-} __packed;
-
-struct bdb_general_definitions {
- /* DDC GPIO */
- u8 crt_ddc_gmbus_pin;
-
- /* DPMS bits */
- u8 dpms_acpi:1;
- u8 skip_boot_crt_detect:1;
- u8 dpms_aim:1;
- u8 rsvd1:5; /* finish byte */
-
- /* boot device bits */
- u8 boot_display[2];
- u8 child_dev_size;
-
- /*
- * Device info:
- * If TV is present, it'll be at devices[0].
- * LVDS will be next, either devices[0] or [1], if present.
- * On some platforms the number of device is 6. But could be as few as
- * 4 if both TV and LVDS are missing.
- * And the device num is related with the size of general definition
- * block. It is obtained by using the following formula:
- * number = (block_size - sizeof(bdb_general_definitions))/
- * defs->child_dev_size;
- */
- uint8_t devices[0];
-} __packed;
-
-/* Mask for DRRS / Panel Channel / SSC / BLT control bits extraction */
-#define MODE_MASK 0x3
-
-struct bdb_lvds_options {
- u8 panel_type;
- u8 rsvd1;
- /* LVDS capabilities, stored in a dword */
- u8 pfit_mode:2;
- u8 pfit_text_mode_enhanced:1;
- u8 pfit_gfx_mode_enhanced:1;
- u8 pfit_ratio_auto:1;
- u8 pixel_dither:1;
- u8 lvds_edid:1;
- u8 rsvd2:1;
- u8 rsvd4;
- /* LVDS Panel channel bits stored here */
- u32 lvds_panel_channel_bits;
- /* LVDS SSC (Spread Spectrum Clock) bits stored here. */
- u16 ssc_bits;
- u16 ssc_freq;
- u16 ssc_ddt;
- /* Panel color depth defined here */
- u16 panel_color_depth;
- /* LVDS panel type bits stored here */
- u32 dps_panel_type_bits;
- /* LVDS backlight control type bits stored here */
- u32 blt_control_type_bits;
-} __packed;
-
-/* LFP pointer table contains entries to the struct below */
-struct bdb_lvds_lfp_data_ptr {
- u16 fp_timing_offset; /* offsets are from start of bdb */
- u8 fp_table_size;
- u16 dvo_timing_offset;
- u8 dvo_table_size;
- u16 panel_pnp_id_offset;
- u8 pnp_table_size;
-} __packed;
-
-struct bdb_lvds_lfp_data_ptrs {
- u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */
- struct bdb_lvds_lfp_data_ptr ptr[16];
-} __packed;
-
-/* LFP data has 3 blocks per entry */
-struct lvds_fp_timing {
- u16 x_res;
- u16 y_res;
- u32 lvds_reg;
- u32 lvds_reg_val;
- u32 pp_on_reg;
- u32 pp_on_reg_val;
- u32 pp_off_reg;
- u32 pp_off_reg_val;
- u32 pp_cycle_reg;
- u32 pp_cycle_reg_val;
- u32 pfit_reg;
- u32 pfit_reg_val;
- u16 terminator;
-} __packed;
-
-struct lvds_dvo_timing {
- u16 clock; /**< In 10khz */
- u8 hactive_lo;
- u8 hblank_lo;
- u8 hblank_hi:4;
- u8 hactive_hi:4;
- u8 vactive_lo;
- u8 vblank_lo;
- u8 vblank_hi:4;
- u8 vactive_hi:4;
- u8 hsync_off_lo;
- u8 hsync_pulse_width;
- u8 vsync_pulse_width:4;
- u8 vsync_off:4;
- u8 rsvd0:6;
- u8 hsync_off_hi:2;
- u8 h_image;
- u8 v_image;
- u8 max_hv;
- u8 h_border;
- u8 v_border;
- u8 rsvd1:3;
- u8 digital:2;
- u8 vsync_positive:1;
- u8 hsync_positive:1;
- u8 rsvd2:1;
-} __packed;
-
-struct lvds_pnp_id {
- u16 mfg_name;
- u16 product_code;
- u32 serial;
- u8 mfg_week;
- u8 mfg_year;
-} __packed;
-
-struct bdb_lvds_lfp_data_entry {
- struct lvds_fp_timing fp_timing;
- struct lvds_dvo_timing dvo_timing;
- struct lvds_pnp_id pnp_id;
-} __packed;
-
-struct bdb_lvds_lfp_data {
- struct bdb_lvds_lfp_data_entry data[16];
-} __packed;
-
-#define BDB_BACKLIGHT_TYPE_NONE 0
-#define BDB_BACKLIGHT_TYPE_PWM 2
-
-struct bdb_lfp_backlight_data_entry {
- u8 type:2;
- u8 active_low_pwm:1;
- u8 obsolete1:5;
- u16 pwm_freq_hz;
- u8 min_brightness;
- u8 obsolete2;
- u8 obsolete3;
-} __packed;
-
-struct bdb_lfp_backlight_data {
- u8 entry_size;
- struct bdb_lfp_backlight_data_entry data[16];
- u8 level[16];
-} __packed;
-
-struct aimdb_header {
- char signature[16];
- char oem_device[20];
- u16 aimdb_version;
- u16 aimdb_header_size;
- u16 aimdb_size;
-} __packed;
-
-struct aimdb_block {
- u8 aimdb_id;
- u16 aimdb_size;
-} __packed;
-struct vch_panel_data {
- u16 fp_timing_offset;
- u8 fp_timing_size;
- u16 dvo_timing_offset;
- u8 dvo_timing_size;
- u16 text_fitting_offset;
- u8 text_fitting_size;
- u16 graphics_fitting_offset;
- u8 graphics_fitting_size;
-} __packed;
-
-struct vch_bdb_22 {
- struct aimdb_block aimdb_block;
- struct vch_panel_data panels[16];
-} __packed;
-
-struct bdb_sdvo_lvds_options {
- u8 panel_backlight;
- u8 h40_set_panel_type;
- u8 panel_type;
- u8 ssc_clk_freq;
- u16 als_low_trip;
- u16 als_high_trip;
- u8 sclalarcoeff_tab_row_num;
- u8 sclalarcoeff_tab_row_size;
- u8 coefficient[8];
- u8 panel_misc_bits_1;
- u8 panel_misc_bits_2;
- u8 panel_misc_bits_3;
- u8 panel_misc_bits_4;
-} __packed;
-
-
-#define BDB_DRIVER_FEATURE_NO_LVDS 0
-#define BDB_DRIVER_FEATURE_INT_LVDS 1
-#define BDB_DRIVER_FEATURE_SDVO_LVDS 2
-#define BDB_DRIVER_FEATURE_EDP 3
-
-struct bdb_driver_features {
- u8 boot_dev_algorithm:1;
- u8 block_display_switch:1;
- u8 allow_display_switch:1;
- u8 hotplug_dvo:1;
- u8 dual_view_zoom:1;
- u8 int15h_hook:1;
- u8 sprite_in_clone:1;
- u8 primary_lfp_id:1;
-
- u16 boot_mode_x;
- u16 boot_mode_y;
- u8 boot_mode_bpp;
- u8 boot_mode_refresh;
-
- u16 enable_lfp_primary:1;
- u16 selective_mode_pruning:1;
- u16 dual_frequency:1;
- u16 render_clock_freq:1; /* 0: high freq; 1: low freq */
- u16 nt_clone_support:1;
- u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */
- u16 sprite_display_assign:1; /* 0: secondary; 1: primary */
- u16 cui_aspect_scaling:1;
- u16 preserve_aspect_ratio:1;
- u16 sdvo_device_power_down:1;
- u16 crt_hotplug:1;
- u16 lvds_config:2;
- u16 tv_hotplug:1;
- u16 hdmi_config:2;
-
- u8 static_display:1;
- u8 reserved2:7;
- u16 legacy_crt_max_x;
- u16 legacy_crt_max_y;
- u8 legacy_crt_max_refresh;
-
- u8 hdmi_termination;
- u8 custom_vbt_version;
- /* Driver features data block */
- u16 rmpm_enabled:1;
- u16 s2ddt_enabled:1;
- u16 dpst_enabled:1;
- u16 bltclt_enabled:1;
- u16 adb_enabled:1;
- u16 drrs_enabled:1;
- u16 grs_enabled:1;
- u16 gpmt_enabled:1;
- u16 tbt_enabled:1;
- u16 psr_enabled:1;
- u16 ips_enabled:1;
- u16 reserved3:4;
- u16 pc_feature_valid:1;
-} __packed;
-
-#define EDP_18BPP 0
-#define EDP_24BPP 1
-#define EDP_30BPP 2
-#define EDP_RATE_1_62 0
-#define EDP_RATE_2_7 1
-#define EDP_LANE_1 0
-#define EDP_LANE_2 1
-#define EDP_LANE_4 3
-#define EDP_PREEMPHASIS_NONE 0
-#define EDP_PREEMPHASIS_3_5dB 1
-#define EDP_PREEMPHASIS_6dB 2
-#define EDP_PREEMPHASIS_9_5dB 3
-#define EDP_VSWING_0_4V 0
-#define EDP_VSWING_0_6V 1
-#define EDP_VSWING_0_8V 2
-#define EDP_VSWING_1_2V 3
+#ifndef _INTEL_BIOS_H_
+#define _INTEL_BIOS_H_
struct edp_power_seq {
u16 t1_t3;
u16 t11_t12;
} __packed;
-struct edp_link_params {
- u8 rate:4;
- u8 lanes:4;
- u8 preemphasis:4;
- u8 vswing:4;
-} __packed;
-
-struct bdb_edp {
- struct edp_power_seq power_seqs[16];
- u32 color_depth;
- struct edp_link_params link_params[16];
- u32 sdrrs_msa_timing_delay;
-
- /* ith bit indicates enabled/disabled for (i+1)th panel */
- u16 edp_s3d_feature;
- u16 edp_t3_optimization;
- u64 edp_vswing_preemph; /* v173 */
-} __packed;
-
-struct psr_table {
- /* Feature bits */
- u8 full_link:1;
- u8 require_aux_to_wakeup:1;
- u8 feature_bits_rsvd:6;
-
- /* Wait times */
- u8 idle_frames:4;
- u8 lines_to_wait:3;
- u8 wait_times_rsvd:1;
-
- /* TP wake up time in multiple of 100 */
- u16 tp1_wakeup_time;
- u16 tp2_tp3_wakeup_time;
-} __packed;
-
-struct bdb_psr {
- struct psr_table psr_table[16];
-} __packed;
-
-/*
- * Driver<->VBIOS interaction occurs through scratch bits in
- * GR18 & SWF*.
- */
-
-/* GR18 bits are set on display switch and hotkey events */
-#define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */
-#define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */
-#define GR18_HK_NONE (0x0<<3)
-#define GR18_HK_LFP_STRETCH (0x1<<3)
-#define GR18_HK_TOGGLE_DISP (0x2<<3)
-#define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */
-#define GR18_HK_POPUP_DISABLED (0x6<<3)
-#define GR18_HK_POPUP_ENABLED (0x7<<3)
-#define GR18_HK_PFIT (0x8<<3)
-#define GR18_HK_APM_CHANGE (0xa<<3)
-#define GR18_HK_MULTIPLE (0xc<<3)
-#define GR18_USER_INT_EN (1<<2)
-#define GR18_A0000_FLUSH_EN (1<<1)
-#define GR18_SMM_EN (1<<0)
-
-/* Set by driver, cleared by VBIOS */
-#define SWF00_YRES_SHIFT 16
-#define SWF00_XRES_SHIFT 0
-#define SWF00_RES_MASK 0xffff
-
-/* Set by VBIOS at boot time and driver at runtime */
-#define SWF01_TV2_FORMAT_SHIFT 8
-#define SWF01_TV1_FORMAT_SHIFT 0
-#define SWF01_TV_FORMAT_MASK 0xffff
-
-#define SWF10_VBIOS_BLC_I2C_EN (1<<29)
-#define SWF10_GTT_OVERRIDE_EN (1<<28)
-#define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */
-#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
-#define SWF10_OLD_TOGGLE 0x0
-#define SWF10_TOGGLE_LIST_1 0x1
-#define SWF10_TOGGLE_LIST_2 0x2
-#define SWF10_TOGGLE_LIST_3 0x3
-#define SWF10_TOGGLE_LIST_4 0x4
-#define SWF10_PANNING_EN (1<<23)
-#define SWF10_DRIVER_LOADED (1<<22)
-#define SWF10_EXTENDED_DESKTOP (1<<21)
-#define SWF10_EXCLUSIVE_MODE (1<<20)
-#define SWF10_OVERLAY_EN (1<<19)
-#define SWF10_PLANEB_HOLDOFF (1<<18)
-#define SWF10_PLANEA_HOLDOFF (1<<17)
-#define SWF10_VGA_HOLDOFF (1<<16)
-#define SWF10_ACTIVE_DISP_MASK 0xffff
-#define SWF10_PIPEB_LFP2 (1<<15)
-#define SWF10_PIPEB_EFP2 (1<<14)
-#define SWF10_PIPEB_TV2 (1<<13)
-#define SWF10_PIPEB_CRT2 (1<<12)
-#define SWF10_PIPEB_LFP (1<<11)
-#define SWF10_PIPEB_EFP (1<<10)
-#define SWF10_PIPEB_TV (1<<9)
-#define SWF10_PIPEB_CRT (1<<8)
-#define SWF10_PIPEA_LFP2 (1<<7)
-#define SWF10_PIPEA_EFP2 (1<<6)
-#define SWF10_PIPEA_TV2 (1<<5)
-#define SWF10_PIPEA_CRT2 (1<<4)
-#define SWF10_PIPEA_LFP (1<<3)
-#define SWF10_PIPEA_EFP (1<<2)
-#define SWF10_PIPEA_TV (1<<1)
-#define SWF10_PIPEA_CRT (1<<0)
-
-#define SWF11_MEMORY_SIZE_SHIFT 16
-#define SWF11_SV_TEST_EN (1<<15)
-#define SWF11_IS_AGP (1<<14)
-#define SWF11_DISPLAY_HOLDOFF (1<<13)
-#define SWF11_DPMS_REDUCED (1<<12)
-#define SWF11_IS_VBE_MODE (1<<11)
-#define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */
-#define SWF11_DPMS_MASK 0x07
-#define SWF11_DPMS_OFF (1<<2)
-#define SWF11_DPMS_SUSPEND (1<<1)
-#define SWF11_DPMS_STANDBY (1<<0)
-#define SWF11_DPMS_ON 0
-
-#define SWF14_GFX_PFIT_EN (1<<31)
-#define SWF14_TEXT_PFIT_EN (1<<30)
-#define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */
-#define SWF14_POPUP_EN (1<<28)
-#define SWF14_DISPLAY_HOLDOFF (1<<27)
-#define SWF14_DISP_DETECT_EN (1<<26)
-#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
-#define SWF14_DRIVER_STATUS (1<<24)
-#define SWF14_OS_TYPE_WIN9X (1<<23)
-#define SWF14_OS_TYPE_WINNT (1<<22)
-/* 21:19 rsvd */
-#define SWF14_PM_TYPE_MASK 0x00070000
-#define SWF14_PM_ACPI_VIDEO (0x4 << 16)
-#define SWF14_PM_ACPI (0x3 << 16)
-#define SWF14_PM_APM_12 (0x2 << 16)
-#define SWF14_PM_APM_11 (0x1 << 16)
-#define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */
- /* if GR18 indicates a display switch */
-#define SWF14_DS_PIPEB_LFP2_EN (1<<15)
-#define SWF14_DS_PIPEB_EFP2_EN (1<<14)
-#define SWF14_DS_PIPEB_TV2_EN (1<<13)
-#define SWF14_DS_PIPEB_CRT2_EN (1<<12)
-#define SWF14_DS_PIPEB_LFP_EN (1<<11)
-#define SWF14_DS_PIPEB_EFP_EN (1<<10)
-#define SWF14_DS_PIPEB_TV_EN (1<<9)
-#define SWF14_DS_PIPEB_CRT_EN (1<<8)
-#define SWF14_DS_PIPEA_LFP2_EN (1<<7)
-#define SWF14_DS_PIPEA_EFP2_EN (1<<6)
-#define SWF14_DS_PIPEA_TV2_EN (1<<5)
-#define SWF14_DS_PIPEA_CRT2_EN (1<<4)
-#define SWF14_DS_PIPEA_LFP_EN (1<<3)
-#define SWF14_DS_PIPEA_EFP_EN (1<<2)
-#define SWF14_DS_PIPEA_TV_EN (1<<1)
-#define SWF14_DS_PIPEA_CRT_EN (1<<0)
- /* if GR18 indicates a panel fitting request */
-#define SWF14_PFIT_EN (1<<0) /* 0 means disable */
- /* if GR18 indicates an APM change request */
-#define SWF14_APM_HIBERNATE 0x4
-#define SWF14_APM_SUSPEND 0x3
-#define SWF14_APM_STANDBY 0x1
-#define SWF14_APM_RESTORE 0x0
-
-/* Add the device class for LFP, TV, HDMI */
-#define DEVICE_TYPE_INT_LFP 0x1022
-#define DEVICE_TYPE_INT_TV 0x1009
-#define DEVICE_TYPE_HDMI 0x60D2
-#define DEVICE_TYPE_DP 0x68C6
-#define DEVICE_TYPE_eDP 0x78C6
-
-#define DEVICE_TYPE_CLASS_EXTENSION (1 << 15)
-#define DEVICE_TYPE_POWER_MANAGEMENT (1 << 14)
-#define DEVICE_TYPE_HOTPLUG_SIGNALING (1 << 13)
-#define DEVICE_TYPE_INTERNAL_CONNECTOR (1 << 12)
-#define DEVICE_TYPE_NOT_HDMI_OUTPUT (1 << 11)
-#define DEVICE_TYPE_MIPI_OUTPUT (1 << 10)
-#define DEVICE_TYPE_COMPOSITE_OUTPUT (1 << 9)
-#define DEVICE_TYPE_DUAL_CHANNEL (1 << 8)
-#define DEVICE_TYPE_HIGH_SPEED_LINK (1 << 6)
-#define DEVICE_TYPE_LVDS_SINGALING (1 << 5)
-#define DEVICE_TYPE_TMDS_DVI_SIGNALING (1 << 4)
-#define DEVICE_TYPE_VIDEO_SIGNALING (1 << 3)
-#define DEVICE_TYPE_DISPLAYPORT_OUTPUT (1 << 2)
-#define DEVICE_TYPE_DIGITAL_OUTPUT (1 << 1)
-#define DEVICE_TYPE_ANALOG_OUTPUT (1 << 0)
-
-/*
- * Bits we care about when checking for DEVICE_TYPE_eDP
- * Depending on the system, the other bits may or may not
- * be set for eDP outputs.
- */
-#define DEVICE_TYPE_eDP_BITS \
- (DEVICE_TYPE_INTERNAL_CONNECTOR | \
- DEVICE_TYPE_MIPI_OUTPUT | \
- DEVICE_TYPE_COMPOSITE_OUTPUT | \
- DEVICE_TYPE_DUAL_CHANNEL | \
- DEVICE_TYPE_LVDS_SINGALING | \
- DEVICE_TYPE_TMDS_DVI_SIGNALING | \
- DEVICE_TYPE_VIDEO_SIGNALING | \
- DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
- DEVICE_TYPE_ANALOG_OUTPUT)
-
-/* define the DVO port for HDMI output type */
-#define DVO_B 1
-#define DVO_C 2
-#define DVO_D 3
-
-/* Possible values for the "DVO Port" field for versions >= 155: */
-#define DVO_PORT_HDMIA 0
-#define DVO_PORT_HDMIB 1
-#define DVO_PORT_HDMIC 2
-#define DVO_PORT_HDMID 3
-#define DVO_PORT_LVDS 4
-#define DVO_PORT_TV 5
-#define DVO_PORT_CRT 6
-#define DVO_PORT_DPB 7
-#define DVO_PORT_DPC 8
-#define DVO_PORT_DPD 9
-#define DVO_PORT_DPA 10
-#define DVO_PORT_DPE 11
-#define DVO_PORT_HDMIE 12
-#define DVO_PORT_MIPIA 21
-#define DVO_PORT_MIPIB 22
-#define DVO_PORT_MIPIC 23
-#define DVO_PORT_MIPID 24
+/* MIPI Sequence Block definitions */
+enum mipi_seq {
+ MIPI_SEQ_END = 0,
+ MIPI_SEQ_ASSERT_RESET,
+ MIPI_SEQ_INIT_OTP,
+ MIPI_SEQ_DISPLAY_ON,
+ MIPI_SEQ_DISPLAY_OFF,
+ MIPI_SEQ_DEASSERT_RESET,
+ MIPI_SEQ_BACKLIGHT_ON, /* sequence block v2+ */
+ MIPI_SEQ_BACKLIGHT_OFF, /* sequence block v2+ */
+ MIPI_SEQ_TEAR_ON, /* sequence block v2+ */
+ MIPI_SEQ_TEAR_OFF, /* sequence block v3+ */
+ MIPI_SEQ_POWER_ON, /* sequence block v3+ */
+ MIPI_SEQ_POWER_OFF, /* sequence block v3+ */
+ MIPI_SEQ_MAX
+};
-/* Block 52 contains MIPI Panel info
- * 6 such enteries will there. Index into correct
- * entery is based on the panel_index in #40 LFP
- */
-#define MAX_MIPI_CONFIGURATIONS 6
+enum mipi_seq_element {
+ MIPI_SEQ_ELEM_END = 0,
+ MIPI_SEQ_ELEM_SEND_PKT,
+ MIPI_SEQ_ELEM_DELAY,
+ MIPI_SEQ_ELEM_GPIO,
+ MIPI_SEQ_ELEM_I2C, /* sequence block v2+ */
+ MIPI_SEQ_ELEM_SPI, /* sequence block v3+ */
+ MIPI_SEQ_ELEM_PMIC, /* sequence block v3+ */
+ MIPI_SEQ_ELEM_MAX
+};
#define MIPI_DSI_UNDEFINED_PANEL_ID 0
#define MIPI_DSI_GENERIC_PANEL_ID 1
-/*
- * PMIC vs SoC Backlight support specified in pwm_blc
- * field in mipi_config block below.
-*/
-#define PPS_BLC_PMIC 0
-#define PPS_BLC_SOC 1
-
struct mipi_config {
u16 panel_id;
u32 video_transfer_mode:2;
u32 cabc_supported:1;
+#define PPS_BLC_PMIC 0
+#define PPS_BLC_SOC 1
u32 pwm_blc:1;
/* Bit 13:10 */
} __packed;
-/* Block 52 contains MIPI configuration block
- * 6 * bdb_mipi_config, followed by 6 pps data
- * block below
- *
- * all delays has a unit of 100us
- */
+/* all delays have a unit of 100us */
struct mipi_pps_data {
u16 panel_on_delay;
u16 bl_enable_delay;
u16 panel_power_cycle_delay;
} __packed;
-struct bdb_mipi_config {
- struct mipi_config config[MAX_MIPI_CONFIGURATIONS];
- struct mipi_pps_data pps[MAX_MIPI_CONFIGURATIONS];
-} __packed;
-
-/* Block 53 contains MIPI sequences as needed by the panel
- * for enabling it. This block can be variable in size and
- * can be maximum of 6 blocks
- */
-struct bdb_mipi_sequence {
- u8 version;
- u8 data[0];
-} __packed;
-
-/* MIPI Sequnece Block definitions */
-enum mipi_seq {
- MIPI_SEQ_END = 0,
- MIPI_SEQ_ASSERT_RESET,
- MIPI_SEQ_INIT_OTP,
- MIPI_SEQ_DISPLAY_ON,
- MIPI_SEQ_DISPLAY_OFF,
- MIPI_SEQ_DEASSERT_RESET,
- MIPI_SEQ_BACKLIGHT_ON, /* sequence block v2+ */
- MIPI_SEQ_BACKLIGHT_OFF, /* sequence block v2+ */
- MIPI_SEQ_TEAR_ON, /* sequence block v2+ */
- MIPI_SEQ_TEAR_OFF, /* sequence block v3+ */
- MIPI_SEQ_POWER_ON, /* sequence block v3+ */
- MIPI_SEQ_POWER_OFF, /* sequence block v3+ */
- MIPI_SEQ_MAX
-};
-
-enum mipi_seq_element {
- MIPI_SEQ_ELEM_END = 0,
- MIPI_SEQ_ELEM_SEND_PKT,
- MIPI_SEQ_ELEM_DELAY,
- MIPI_SEQ_ELEM_GPIO,
- MIPI_SEQ_ELEM_I2C, /* sequence block v2+ */
- MIPI_SEQ_ELEM_SPI, /* sequence block v3+ */
- MIPI_SEQ_ELEM_PMIC, /* sequence block v3+ */
- MIPI_SEQ_ELEM_MAX
-};
-
-enum mipi_gpio_pin_index {
- MIPI_GPIO_UNDEFINED = 0,
- MIPI_GPIO_PANEL_ENABLE,
- MIPI_GPIO_BL_ENABLE,
- MIPI_GPIO_PWM_ENABLE,
- MIPI_GPIO_RESET_N,
- MIPI_GPIO_PWR_DOWN_R,
- MIPI_GPIO_STDBY_RST_N,
- MIPI_GPIO_MAX
-};
-
#endif /* _INTEL_BIOS_H_ */
--- /dev/null
+/*
+ * Copyright © 2006-2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Authors:
+ * Eric Anholt <eric@anholt.net>
+ *
+ */
+
+/*
+ * This information is private to VBT parsing in intel_bios.c.
+ *
+ * Please do NOT include anywhere else.
+ */
+#ifndef _INTEL_BIOS_PRIVATE
+#error "intel_vbt_defs.h is private to intel_bios.c"
+#endif
+
+#ifndef _INTEL_VBT_DEFS_H_
+#define _INTEL_VBT_DEFS_H_
+
+#include "intel_bios.h"
+
+/**
+ * struct vbt_header - VBT Header structure
+ * @signature: VBT signature, always starts with "$VBT"
+ * @version: Version of this structure
+ * @header_size: Size of this structure
+ * @vbt_size: Size of VBT (VBT Header, BDB Header and data blocks)
+ * @vbt_checksum: Checksum
+ * @reserved0: Reserved
+ * @bdb_offset: Offset of &struct bdb_header from beginning of VBT
+ * @aim_offset: Offsets of add-in data blocks from beginning of VBT
+ */
+struct vbt_header {
+ u8 signature[20];
+ u16 version;
+ u16 header_size;
+ u16 vbt_size;
+ u8 vbt_checksum;
+ u8 reserved0;
+ u32 bdb_offset;
+ u32 aim_offset[4];
+} __packed;
+
+/**
+ * struct bdb_header - BDB Header structure
+ * @signature: BDB signature "BIOS_DATA_BLOCK"
+ * @version: Version of the data block definitions
+ * @header_size: Size of this structure
+ * @bdb_size: Size of BDB (BDB Header and data blocks)
+ */
+struct bdb_header {
+ u8 signature[16];
+ u16 version;
+ u16 header_size;
+ u16 bdb_size;
+} __packed;
+
+/* strictly speaking, this is a "skip" block, but it has interesting info */
+struct vbios_data {
+ u8 type; /* 0 == desktop, 1 == mobile */
+ u8 relstage;
+ u8 chipset;
+ u8 lvds_present:1;
+ u8 tv_present:1;
+ u8 rsvd2:6; /* finish byte */
+ u8 rsvd3[4];
+ u8 signon[155];
+ u8 copyright[61];
+ u16 code_segment;
+ u8 dos_boot_mode;
+ u8 bandwidth_percent;
+ u8 rsvd4; /* popup memory size */
+ u8 resize_pci_bios;
+ u8 rsvd5; /* is crt already on ddc2 */
+} __packed;
+
+/*
+ * There are several types of BIOS data blocks (BDBs), each block has
+ * an ID and size in the first 3 bytes (ID in first, size in next 2).
+ * Known types are listed below.
+ */
+#define BDB_GENERAL_FEATURES 1
+#define BDB_GENERAL_DEFINITIONS 2
+#define BDB_OLD_TOGGLE_LIST 3
+#define BDB_MODE_SUPPORT_LIST 4
+#define BDB_GENERIC_MODE_TABLE 5
+#define BDB_EXT_MMIO_REGS 6
+#define BDB_SWF_IO 7
+#define BDB_SWF_MMIO 8
+#define BDB_PSR 9
+#define BDB_MODE_REMOVAL_TABLE 10
+#define BDB_CHILD_DEVICE_TABLE 11
+#define BDB_DRIVER_FEATURES 12
+#define BDB_DRIVER_PERSISTENCE 13
+#define BDB_EXT_TABLE_PTRS 14
+#define BDB_DOT_CLOCK_OVERRIDE 15
+#define BDB_DISPLAY_SELECT 16
+/* 17 rsvd */
+#define BDB_DRIVER_ROTATION 18
+#define BDB_DISPLAY_REMOVE 19
+#define BDB_OEM_CUSTOM 20
+#define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */
+#define BDB_SDVO_LVDS_OPTIONS 22
+#define BDB_SDVO_PANEL_DTDS 23
+#define BDB_SDVO_LVDS_PNP_IDS 24
+#define BDB_SDVO_LVDS_POWER_SEQ 25
+#define BDB_TV_OPTIONS 26
+#define BDB_EDP 27
+#define BDB_LVDS_OPTIONS 40
+#define BDB_LVDS_LFP_DATA_PTRS 41
+#define BDB_LVDS_LFP_DATA 42
+#define BDB_LVDS_BACKLIGHT 43
+#define BDB_LVDS_POWER 44
+#define BDB_MIPI_CONFIG 52
+#define BDB_MIPI_SEQUENCE 53
+#define BDB_SKIP 254 /* VBIOS private block, ignore */
+
+struct bdb_general_features {
+ /* bits 1 */
+ u8 panel_fitting:2;
+ u8 flexaim:1;
+ u8 msg_enable:1;
+ u8 clear_screen:3;
+ u8 color_flip:1;
+
+ /* bits 2 */
+ u8 download_ext_vbt:1;
+ u8 enable_ssc:1;
+ u8 ssc_freq:1;
+ u8 enable_lfp_on_override:1;
+ u8 disable_ssc_ddt:1;
+ u8 rsvd7:1;
+ u8 display_clock_mode:1;
+ u8 rsvd8:1; /* finish byte */
+
+ /* bits 3 */
+ u8 disable_smooth_vision:1;
+ u8 single_dvi:1;
+ u8 rsvd9:1;
+ u8 fdi_rx_polarity_inverted:1;
+ u8 rsvd10:4; /* finish byte */
+
+ /* bits 4 */
+ u8 legacy_monitor_detect;
+
+ /* bits 5 */
+ u8 int_crt_support:1;
+ u8 int_tv_support:1;
+ u8 int_efp_support:1;
+ u8 dp_ssc_enb:1; /* PCH attached eDP supports SSC */
+ u8 dp_ssc_freq:1; /* SSC freq for PCH attached eDP */
+ u8 rsvd11:3; /* finish byte */
+} __packed;
+
+/* pre-915 */
+#define GPIO_PIN_DVI_LVDS 0x03 /* "DVI/LVDS DDC GPIO pins" */
+#define GPIO_PIN_ADD_I2C 0x05 /* "ADDCARD I2C GPIO pins" */
+#define GPIO_PIN_ADD_DDC 0x04 /* "ADDCARD DDC GPIO pins" */
+#define GPIO_PIN_ADD_DDC_I2C 0x06 /* "ADDCARD DDC/I2C GPIO pins" */
+
+/* Pre 915 */
+#define DEVICE_TYPE_NONE 0x00
+#define DEVICE_TYPE_CRT 0x01
+#define DEVICE_TYPE_TV 0x09
+#define DEVICE_TYPE_EFP 0x12
+#define DEVICE_TYPE_LFP 0x22
+/* On 915+ */
+#define DEVICE_TYPE_CRT_DPMS 0x6001
+#define DEVICE_TYPE_CRT_DPMS_HOTPLUG 0x4001
+#define DEVICE_TYPE_TV_COMPOSITE 0x0209
+#define DEVICE_TYPE_TV_MACROVISION 0x0289
+#define DEVICE_TYPE_TV_RF_COMPOSITE 0x020c
+#define DEVICE_TYPE_TV_SVIDEO_COMPOSITE 0x0609
+#define DEVICE_TYPE_TV_SCART 0x0209
+#define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009
+#define DEVICE_TYPE_EFP_HOTPLUG_PWR 0x6012
+#define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR 0x6052
+#define DEVICE_TYPE_EFP_DVI_I 0x6053
+#define DEVICE_TYPE_EFP_DVI_D_DUAL 0x6152
+#define DEVICE_TYPE_EFP_DVI_D_HDCP 0x60d2
+#define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR 0x6062
+#define DEVICE_TYPE_OPENLDI_DUALPIX 0x6162
+#define DEVICE_TYPE_LFP_PANELLINK 0x5012
+#define DEVICE_TYPE_LFP_CMOS_PWR 0x5042
+#define DEVICE_TYPE_LFP_LVDS_PWR 0x5062
+#define DEVICE_TYPE_LFP_LVDS_DUAL 0x5162
+#define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP 0x51e2
+
+#define DEVICE_CFG_NONE 0x00
+#define DEVICE_CFG_12BIT_DVOB 0x01
+#define DEVICE_CFG_12BIT_DVOC 0x02
+#define DEVICE_CFG_24BIT_DVOBC 0x09
+#define DEVICE_CFG_24BIT_DVOCB 0x0a
+#define DEVICE_CFG_DUAL_DVOB 0x11
+#define DEVICE_CFG_DUAL_DVOC 0x12
+#define DEVICE_CFG_DUAL_DVOBC 0x13
+#define DEVICE_CFG_DUAL_LINK_DVOBC 0x19
+#define DEVICE_CFG_DUAL_LINK_DVOCB 0x1a
+
+#define DEVICE_WIRE_NONE 0x00
+#define DEVICE_WIRE_DVOB 0x01
+#define DEVICE_WIRE_DVOC 0x02
+#define DEVICE_WIRE_DVOBC 0x03
+#define DEVICE_WIRE_DVOBB 0x05
+#define DEVICE_WIRE_DVOCC 0x06
+#define DEVICE_WIRE_DVOB_MASTER 0x0d
+#define DEVICE_WIRE_DVOC_MASTER 0x0e
+
+#define DEVICE_PORT_DVOA 0x00 /* none on 845+ */
+#define DEVICE_PORT_DVOB 0x01
+#define DEVICE_PORT_DVOC 0x02
+
+/*
+ * We used to keep this struct but without any version control. We should avoid
+ * using it in the future, but it should be safe to keep using it in the old
+ * code. Do not change; we rely on its size.
+ */
+struct old_child_dev_config {
+ u16 handle;
+ u16 device_type;
+ u8 device_id[10]; /* ascii string */
+ u16 addin_offset;
+ u8 dvo_port; /* See Device_PORT_* above */
+ u8 i2c_pin;
+ u8 slave_addr;
+ u8 ddc_pin;
+ u16 edid_ptr;
+ u8 dvo_cfg; /* See DEVICE_CFG_* above */
+ u8 dvo2_port;
+ u8 i2c2_pin;
+ u8 slave2_addr;
+ u8 ddc2_pin;
+ u8 capabilities;
+ u8 dvo_wiring;/* See DEVICE_WIRE_* above */
+ u8 dvo2_wiring;
+ u16 extended_type;
+ u8 dvo_function;
+} __packed;
+
+/* This one contains field offsets that are known to be common for all BDB
+ * versions. Notice that the meaning of the contents contents may still change,
+ * but at least the offsets are consistent. */
+
+/* Definitions for flags_1 */
+#define IBOOST_ENABLE (1<<3)
+
+struct common_child_dev_config {
+ u16 handle;
+ u16 device_type;
+ u8 not_common1[12];
+ u8 dvo_port;
+ u8 not_common2[2];
+ u8 ddc_pin;
+ u16 edid_ptr;
+ u8 obsolete;
+ u8 flags_1;
+ u8 not_common3[13];
+ u8 iboost_level;
+} __packed;
+
+
+/* This field changes depending on the BDB version, so the most reliable way to
+ * read it is by checking the BDB version and reading the raw pointer. */
+union child_device_config {
+ /* This one is safe to be used anywhere, but the code should still check
+ * the BDB version. */
+ u8 raw[33];
+ /* This one should only be kept for legacy code. */
+ struct old_child_dev_config old;
+ /* This one should also be safe to use anywhere, even without version
+ * checks. */
+ struct common_child_dev_config common;
+} __packed;
+
+struct bdb_general_definitions {
+ /* DDC GPIO */
+ u8 crt_ddc_gmbus_pin;
+
+ /* DPMS bits */
+ u8 dpms_acpi:1;
+ u8 skip_boot_crt_detect:1;
+ u8 dpms_aim:1;
+ u8 rsvd1:5; /* finish byte */
+
+ /* boot device bits */
+ u8 boot_display[2];
+ u8 child_dev_size;
+
+ /*
+ * Device info:
+ * If TV is present, it'll be at devices[0].
+ * LVDS will be next, either devices[0] or [1], if present.
+ * On some platforms the number of device is 6. But could be as few as
+ * 4 if both TV and LVDS are missing.
+ * And the device num is related with the size of general definition
+ * block. It is obtained by using the following formula:
+ * number = (block_size - sizeof(bdb_general_definitions))/
+ * defs->child_dev_size;
+ */
+ uint8_t devices[0];
+} __packed;
+
+/* Mask for DRRS / Panel Channel / SSC / BLT control bits extraction */
+#define MODE_MASK 0x3
+
+struct bdb_lvds_options {
+ u8 panel_type;
+ u8 rsvd1;
+ /* LVDS capabilities, stored in a dword */
+ u8 pfit_mode:2;
+ u8 pfit_text_mode_enhanced:1;
+ u8 pfit_gfx_mode_enhanced:1;
+ u8 pfit_ratio_auto:1;
+ u8 pixel_dither:1;
+ u8 lvds_edid:1;
+ u8 rsvd2:1;
+ u8 rsvd4;
+ /* LVDS Panel channel bits stored here */
+ u32 lvds_panel_channel_bits;
+ /* LVDS SSC (Spread Spectrum Clock) bits stored here. */
+ u16 ssc_bits;
+ u16 ssc_freq;
+ u16 ssc_ddt;
+ /* Panel color depth defined here */
+ u16 panel_color_depth;
+ /* LVDS panel type bits stored here */
+ u32 dps_panel_type_bits;
+ /* LVDS backlight control type bits stored here */
+ u32 blt_control_type_bits;
+} __packed;
+
+/* LFP pointer table contains entries to the struct below */
+struct bdb_lvds_lfp_data_ptr {
+ u16 fp_timing_offset; /* offsets are from start of bdb */
+ u8 fp_table_size;
+ u16 dvo_timing_offset;
+ u8 dvo_table_size;
+ u16 panel_pnp_id_offset;
+ u8 pnp_table_size;
+} __packed;
+
+struct bdb_lvds_lfp_data_ptrs {
+ u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */
+ struct bdb_lvds_lfp_data_ptr ptr[16];
+} __packed;
+
+/* LFP data has 3 blocks per entry */
+struct lvds_fp_timing {
+ u16 x_res;
+ u16 y_res;
+ u32 lvds_reg;
+ u32 lvds_reg_val;
+ u32 pp_on_reg;
+ u32 pp_on_reg_val;
+ u32 pp_off_reg;
+ u32 pp_off_reg_val;
+ u32 pp_cycle_reg;
+ u32 pp_cycle_reg_val;
+ u32 pfit_reg;
+ u32 pfit_reg_val;
+ u16 terminator;
+} __packed;
+
+struct lvds_dvo_timing {
+ u16 clock; /**< In 10khz */
+ u8 hactive_lo;
+ u8 hblank_lo;
+ u8 hblank_hi:4;
+ u8 hactive_hi:4;
+ u8 vactive_lo;
+ u8 vblank_lo;
+ u8 vblank_hi:4;
+ u8 vactive_hi:4;
+ u8 hsync_off_lo;
+ u8 hsync_pulse_width;
+ u8 vsync_pulse_width:4;
+ u8 vsync_off:4;
+ u8 rsvd0:6;
+ u8 hsync_off_hi:2;
+ u8 h_image;
+ u8 v_image;
+ u8 max_hv;
+ u8 h_border;
+ u8 v_border;
+ u8 rsvd1:3;
+ u8 digital:2;
+ u8 vsync_positive:1;
+ u8 hsync_positive:1;
+ u8 rsvd2:1;
+} __packed;
+
+struct lvds_pnp_id {
+ u16 mfg_name;
+ u16 product_code;
+ u32 serial;
+ u8 mfg_week;
+ u8 mfg_year;
+} __packed;
+
+struct bdb_lvds_lfp_data_entry {
+ struct lvds_fp_timing fp_timing;
+ struct lvds_dvo_timing dvo_timing;
+ struct lvds_pnp_id pnp_id;
+} __packed;
+
+struct bdb_lvds_lfp_data {
+ struct bdb_lvds_lfp_data_entry data[16];
+} __packed;
+
+#define BDB_BACKLIGHT_TYPE_NONE 0
+#define BDB_BACKLIGHT_TYPE_PWM 2
+
+struct bdb_lfp_backlight_data_entry {
+ u8 type:2;
+ u8 active_low_pwm:1;
+ u8 obsolete1:5;
+ u16 pwm_freq_hz;
+ u8 min_brightness;
+ u8 obsolete2;
+ u8 obsolete3;
+} __packed;
+
+struct bdb_lfp_backlight_data {
+ u8 entry_size;
+ struct bdb_lfp_backlight_data_entry data[16];
+ u8 level[16];
+} __packed;
+
+struct aimdb_header {
+ char signature[16];
+ char oem_device[20];
+ u16 aimdb_version;
+ u16 aimdb_header_size;
+ u16 aimdb_size;
+} __packed;
+
+struct aimdb_block {
+ u8 aimdb_id;
+ u16 aimdb_size;
+} __packed;
+
+struct vch_panel_data {
+ u16 fp_timing_offset;
+ u8 fp_timing_size;
+ u16 dvo_timing_offset;
+ u8 dvo_timing_size;
+ u16 text_fitting_offset;
+ u8 text_fitting_size;
+ u16 graphics_fitting_offset;
+ u8 graphics_fitting_size;
+} __packed;
+
+struct vch_bdb_22 {
+ struct aimdb_block aimdb_block;
+ struct vch_panel_data panels[16];
+} __packed;
+
+struct bdb_sdvo_lvds_options {
+ u8 panel_backlight;
+ u8 h40_set_panel_type;
+ u8 panel_type;
+ u8 ssc_clk_freq;
+ u16 als_low_trip;
+ u16 als_high_trip;
+ u8 sclalarcoeff_tab_row_num;
+ u8 sclalarcoeff_tab_row_size;
+ u8 coefficient[8];
+ u8 panel_misc_bits_1;
+ u8 panel_misc_bits_2;
+ u8 panel_misc_bits_3;
+ u8 panel_misc_bits_4;
+} __packed;
+
+
+#define BDB_DRIVER_FEATURE_NO_LVDS 0
+#define BDB_DRIVER_FEATURE_INT_LVDS 1
+#define BDB_DRIVER_FEATURE_SDVO_LVDS 2
+#define BDB_DRIVER_FEATURE_EDP 3
+
+struct bdb_driver_features {
+ u8 boot_dev_algorithm:1;
+ u8 block_display_switch:1;
+ u8 allow_display_switch:1;
+ u8 hotplug_dvo:1;
+ u8 dual_view_zoom:1;
+ u8 int15h_hook:1;
+ u8 sprite_in_clone:1;
+ u8 primary_lfp_id:1;
+
+ u16 boot_mode_x;
+ u16 boot_mode_y;
+ u8 boot_mode_bpp;
+ u8 boot_mode_refresh;
+
+ u16 enable_lfp_primary:1;
+ u16 selective_mode_pruning:1;
+ u16 dual_frequency:1;
+ u16 render_clock_freq:1; /* 0: high freq; 1: low freq */
+ u16 nt_clone_support:1;
+ u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */
+ u16 sprite_display_assign:1; /* 0: secondary; 1: primary */
+ u16 cui_aspect_scaling:1;
+ u16 preserve_aspect_ratio:1;
+ u16 sdvo_device_power_down:1;
+ u16 crt_hotplug:1;
+ u16 lvds_config:2;
+ u16 tv_hotplug:1;
+ u16 hdmi_config:2;
+
+ u8 static_display:1;
+ u8 reserved2:7;
+ u16 legacy_crt_max_x;
+ u16 legacy_crt_max_y;
+ u8 legacy_crt_max_refresh;
+
+ u8 hdmi_termination;
+ u8 custom_vbt_version;
+ /* Driver features data block */
+ u16 rmpm_enabled:1;
+ u16 s2ddt_enabled:1;
+ u16 dpst_enabled:1;
+ u16 bltclt_enabled:1;
+ u16 adb_enabled:1;
+ u16 drrs_enabled:1;
+ u16 grs_enabled:1;
+ u16 gpmt_enabled:1;
+ u16 tbt_enabled:1;
+ u16 psr_enabled:1;
+ u16 ips_enabled:1;
+ u16 reserved3:4;
+ u16 pc_feature_valid:1;
+} __packed;
+
+#define EDP_18BPP 0
+#define EDP_24BPP 1
+#define EDP_30BPP 2
+#define EDP_RATE_1_62 0
+#define EDP_RATE_2_7 1
+#define EDP_LANE_1 0
+#define EDP_LANE_2 1
+#define EDP_LANE_4 3
+#define EDP_PREEMPHASIS_NONE 0
+#define EDP_PREEMPHASIS_3_5dB 1
+#define EDP_PREEMPHASIS_6dB 2
+#define EDP_PREEMPHASIS_9_5dB 3
+#define EDP_VSWING_0_4V 0
+#define EDP_VSWING_0_6V 1
+#define EDP_VSWING_0_8V 2
+#define EDP_VSWING_1_2V 3
+
+
+struct edp_link_params {
+ u8 rate:4;
+ u8 lanes:4;
+ u8 preemphasis:4;
+ u8 vswing:4;
+} __packed;
+
+struct bdb_edp {
+ struct edp_power_seq power_seqs[16];
+ u32 color_depth;
+ struct edp_link_params link_params[16];
+ u32 sdrrs_msa_timing_delay;
+
+ /* ith bit indicates enabled/disabled for (i+1)th panel */
+ u16 edp_s3d_feature;
+ u16 edp_t3_optimization;
+ u64 edp_vswing_preemph; /* v173 */
+} __packed;
+
+struct psr_table {
+ /* Feature bits */
+ u8 full_link:1;
+ u8 require_aux_to_wakeup:1;
+ u8 feature_bits_rsvd:6;
+
+ /* Wait times */
+ u8 idle_frames:4;
+ u8 lines_to_wait:3;
+ u8 wait_times_rsvd:1;
+
+ /* TP wake up time in multiple of 100 */
+ u16 tp1_wakeup_time;
+ u16 tp2_tp3_wakeup_time;
+} __packed;
+
+struct bdb_psr {
+ struct psr_table psr_table[16];
+} __packed;
+
+/*
+ * Driver<->VBIOS interaction occurs through scratch bits in
+ * GR18 & SWF*.
+ */
+
+/* GR18 bits are set on display switch and hotkey events */
+#define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */
+#define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */
+#define GR18_HK_NONE (0x0<<3)
+#define GR18_HK_LFP_STRETCH (0x1<<3)
+#define GR18_HK_TOGGLE_DISP (0x2<<3)
+#define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */
+#define GR18_HK_POPUP_DISABLED (0x6<<3)
+#define GR18_HK_POPUP_ENABLED (0x7<<3)
+#define GR18_HK_PFIT (0x8<<3)
+#define GR18_HK_APM_CHANGE (0xa<<3)
+#define GR18_HK_MULTIPLE (0xc<<3)
+#define GR18_USER_INT_EN (1<<2)
+#define GR18_A0000_FLUSH_EN (1<<1)
+#define GR18_SMM_EN (1<<0)
+
+/* Set by driver, cleared by VBIOS */
+#define SWF00_YRES_SHIFT 16
+#define SWF00_XRES_SHIFT 0
+#define SWF00_RES_MASK 0xffff
+
+/* Set by VBIOS at boot time and driver at runtime */
+#define SWF01_TV2_FORMAT_SHIFT 8
+#define SWF01_TV1_FORMAT_SHIFT 0
+#define SWF01_TV_FORMAT_MASK 0xffff
+
+#define SWF10_VBIOS_BLC_I2C_EN (1<<29)
+#define SWF10_GTT_OVERRIDE_EN (1<<28)
+#define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */
+#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
+#define SWF10_OLD_TOGGLE 0x0
+#define SWF10_TOGGLE_LIST_1 0x1
+#define SWF10_TOGGLE_LIST_2 0x2
+#define SWF10_TOGGLE_LIST_3 0x3
+#define SWF10_TOGGLE_LIST_4 0x4
+#define SWF10_PANNING_EN (1<<23)
+#define SWF10_DRIVER_LOADED (1<<22)
+#define SWF10_EXTENDED_DESKTOP (1<<21)
+#define SWF10_EXCLUSIVE_MODE (1<<20)
+#define SWF10_OVERLAY_EN (1<<19)
+#define SWF10_PLANEB_HOLDOFF (1<<18)
+#define SWF10_PLANEA_HOLDOFF (1<<17)
+#define SWF10_VGA_HOLDOFF (1<<16)
+#define SWF10_ACTIVE_DISP_MASK 0xffff
+#define SWF10_PIPEB_LFP2 (1<<15)
+#define SWF10_PIPEB_EFP2 (1<<14)
+#define SWF10_PIPEB_TV2 (1<<13)
+#define SWF10_PIPEB_CRT2 (1<<12)
+#define SWF10_PIPEB_LFP (1<<11)
+#define SWF10_PIPEB_EFP (1<<10)
+#define SWF10_PIPEB_TV (1<<9)
+#define SWF10_PIPEB_CRT (1<<8)
+#define SWF10_PIPEA_LFP2 (1<<7)
+#define SWF10_PIPEA_EFP2 (1<<6)
+#define SWF10_PIPEA_TV2 (1<<5)
+#define SWF10_PIPEA_CRT2 (1<<4)
+#define SWF10_PIPEA_LFP (1<<3)
+#define SWF10_PIPEA_EFP (1<<2)
+#define SWF10_PIPEA_TV (1<<1)
+#define SWF10_PIPEA_CRT (1<<0)
+
+#define SWF11_MEMORY_SIZE_SHIFT 16
+#define SWF11_SV_TEST_EN (1<<15)
+#define SWF11_IS_AGP (1<<14)
+#define SWF11_DISPLAY_HOLDOFF (1<<13)
+#define SWF11_DPMS_REDUCED (1<<12)
+#define SWF11_IS_VBE_MODE (1<<11)
+#define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */
+#define SWF11_DPMS_MASK 0x07
+#define SWF11_DPMS_OFF (1<<2)
+#define SWF11_DPMS_SUSPEND (1<<1)
+#define SWF11_DPMS_STANDBY (1<<0)
+#define SWF11_DPMS_ON 0
+
+#define SWF14_GFX_PFIT_EN (1<<31)
+#define SWF14_TEXT_PFIT_EN (1<<30)
+#define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */
+#define SWF14_POPUP_EN (1<<28)
+#define SWF14_DISPLAY_HOLDOFF (1<<27)
+#define SWF14_DISP_DETECT_EN (1<<26)
+#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
+#define SWF14_DRIVER_STATUS (1<<24)
+#define SWF14_OS_TYPE_WIN9X (1<<23)
+#define SWF14_OS_TYPE_WINNT (1<<22)
+/* 21:19 rsvd */
+#define SWF14_PM_TYPE_MASK 0x00070000
+#define SWF14_PM_ACPI_VIDEO (0x4 << 16)
+#define SWF14_PM_ACPI (0x3 << 16)
+#define SWF14_PM_APM_12 (0x2 << 16)
+#define SWF14_PM_APM_11 (0x1 << 16)
+#define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */
+ /* if GR18 indicates a display switch */
+#define SWF14_DS_PIPEB_LFP2_EN (1<<15)
+#define SWF14_DS_PIPEB_EFP2_EN (1<<14)
+#define SWF14_DS_PIPEB_TV2_EN (1<<13)
+#define SWF14_DS_PIPEB_CRT2_EN (1<<12)
+#define SWF14_DS_PIPEB_LFP_EN (1<<11)
+#define SWF14_DS_PIPEB_EFP_EN (1<<10)
+#define SWF14_DS_PIPEB_TV_EN (1<<9)
+#define SWF14_DS_PIPEB_CRT_EN (1<<8)
+#define SWF14_DS_PIPEA_LFP2_EN (1<<7)
+#define SWF14_DS_PIPEA_EFP2_EN (1<<6)
+#define SWF14_DS_PIPEA_TV2_EN (1<<5)
+#define SWF14_DS_PIPEA_CRT2_EN (1<<4)
+#define SWF14_DS_PIPEA_LFP_EN (1<<3)
+#define SWF14_DS_PIPEA_EFP_EN (1<<2)
+#define SWF14_DS_PIPEA_TV_EN (1<<1)
+#define SWF14_DS_PIPEA_CRT_EN (1<<0)
+ /* if GR18 indicates a panel fitting request */
+#define SWF14_PFIT_EN (1<<0) /* 0 means disable */
+ /* if GR18 indicates an APM change request */
+#define SWF14_APM_HIBERNATE 0x4
+#define SWF14_APM_SUSPEND 0x3
+#define SWF14_APM_STANDBY 0x1
+#define SWF14_APM_RESTORE 0x0
+
+/* Add the device class for LFP, TV, HDMI */
+#define DEVICE_TYPE_INT_LFP 0x1022
+#define DEVICE_TYPE_INT_TV 0x1009
+#define DEVICE_TYPE_HDMI 0x60D2
+#define DEVICE_TYPE_DP 0x68C6
+#define DEVICE_TYPE_eDP 0x78C6
+
+#define DEVICE_TYPE_CLASS_EXTENSION (1 << 15)
+#define DEVICE_TYPE_POWER_MANAGEMENT (1 << 14)
+#define DEVICE_TYPE_HOTPLUG_SIGNALING (1 << 13)
+#define DEVICE_TYPE_INTERNAL_CONNECTOR (1 << 12)
+#define DEVICE_TYPE_NOT_HDMI_OUTPUT (1 << 11)
+#define DEVICE_TYPE_MIPI_OUTPUT (1 << 10)
+#define DEVICE_TYPE_COMPOSITE_OUTPUT (1 << 9)
+#define DEVICE_TYPE_DUAL_CHANNEL (1 << 8)
+#define DEVICE_TYPE_HIGH_SPEED_LINK (1 << 6)
+#define DEVICE_TYPE_LVDS_SINGALING (1 << 5)
+#define DEVICE_TYPE_TMDS_DVI_SIGNALING (1 << 4)
+#define DEVICE_TYPE_VIDEO_SIGNALING (1 << 3)
+#define DEVICE_TYPE_DISPLAYPORT_OUTPUT (1 << 2)
+#define DEVICE_TYPE_DIGITAL_OUTPUT (1 << 1)
+#define DEVICE_TYPE_ANALOG_OUTPUT (1 << 0)
+
+/*
+ * Bits we care about when checking for DEVICE_TYPE_eDP
+ * Depending on the system, the other bits may or may not
+ * be set for eDP outputs.
+ */
+#define DEVICE_TYPE_eDP_BITS \
+ (DEVICE_TYPE_INTERNAL_CONNECTOR | \
+ DEVICE_TYPE_MIPI_OUTPUT | \
+ DEVICE_TYPE_COMPOSITE_OUTPUT | \
+ DEVICE_TYPE_DUAL_CHANNEL | \
+ DEVICE_TYPE_LVDS_SINGALING | \
+ DEVICE_TYPE_TMDS_DVI_SIGNALING | \
+ DEVICE_TYPE_VIDEO_SIGNALING | \
+ DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
+ DEVICE_TYPE_ANALOG_OUTPUT)
+
+/* define the DVO port for HDMI output type */
+#define DVO_B 1
+#define DVO_C 2
+#define DVO_D 3
+
+/* Possible values for the "DVO Port" field for versions >= 155: */
+#define DVO_PORT_HDMIA 0
+#define DVO_PORT_HDMIB 1
+#define DVO_PORT_HDMIC 2
+#define DVO_PORT_HDMID 3
+#define DVO_PORT_LVDS 4
+#define DVO_PORT_TV 5
+#define DVO_PORT_CRT 6
+#define DVO_PORT_DPB 7
+#define DVO_PORT_DPC 8
+#define DVO_PORT_DPD 9
+#define DVO_PORT_DPA 10
+#define DVO_PORT_DPE 11
+#define DVO_PORT_HDMIE 12
+#define DVO_PORT_MIPIA 21
+#define DVO_PORT_MIPIB 22
+#define DVO_PORT_MIPIC 23
+#define DVO_PORT_MIPID 24
+
+/* Block 52 contains MIPI configuration block
+ * 6 * bdb_mipi_config, followed by 6 pps data block
+ * block below
+ */
+#define MAX_MIPI_CONFIGURATIONS 6
+
+struct bdb_mipi_config {
+ struct mipi_config config[MAX_MIPI_CONFIGURATIONS];
+ struct mipi_pps_data pps[MAX_MIPI_CONFIGURATIONS];
+} __packed;
+
+/* Block 53 contains MIPI sequences as needed by the panel
+ * for enabling it. This block can be variable in size and
+ * can be maximum of 6 blocks
+ */
+struct bdb_mipi_sequence {
+ u8 version;
+ u8 data[0];
+} __packed;
+
+enum mipi_gpio_pin_index {
+ MIPI_GPIO_UNDEFINED = 0,
+ MIPI_GPIO_PANEL_ENABLE,
+ MIPI_GPIO_BL_ENABLE,
+ MIPI_GPIO_PWM_ENABLE,
+ MIPI_GPIO_RESET_N,
+ MIPI_GPIO_PWR_DOWN_R,
+ MIPI_GPIO_STDBY_RST_N,
+ MIPI_GPIO_MAX
+};
+
+#endif /* _INTEL_VBT_DEFS_H_ */
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff