staging: wilc1000: delete definition USE_WIRELESS

The preprocessor definition, USE_WIRELESS is always in use.
So, this patch deletes the definitions from the makefile and source codes.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/wilc1000/Makefile b/drivers/staging/wilc1000/Makefile
index 3b6bc7bbc22969a3230156fa12f11bc53b6eb7e8..8336a8939cd785c3fa2e10fb1e31c00768a300bf 100644 (file)
--- a/drivers/staging/wilc1000/Makefile
+++ b/drivers/staging/wilc1000/Makefile
@@ -11,7 +11,7 @@ ccflags-y += -DSTA_FIRMWARE=\"atmel/wilc1000_fw.bin\" \
 ccflags-y += -I$(src)/ -D__CHECK_ENDIAN__ -DWILC_ASIC_A0 \
                -DPLL_WORKAROUND -DCONNECT_DIRECT  -DAGING_ALG \
                -DWILC_PARSE_SCAN_IN_HOST -DDISABLE_PWRSAVE_AND_SCAN_DURING_IP \
-               -Wno-unused-function -DUSE_WIRELESS -DWILC_DEBUGFS
+               -Wno-unused-function -DWILC_DEBUGFS
 #ccflags-y += -DTCP_ACK_FILTER
 
 ccflags-$(CONFIG_WILC1000_PREALLOCATE_AT_LOADING_DRIVER) += -DMEMORY_STATIC \

diff --git a/drivers/staging/wilc1000/linux_mon.c b/drivers/staging/wilc1000/linux_mon.c
index dd8007141ea609664d469a1242aba6d38bbcf431..d87387719626361b46c6825990b5874cb5e00d2f 100644 (file)
--- a/drivers/staging/wilc1000/linux_mon.c
+++ b/drivers/staging/wilc1000/linux_mon.c
@@ -31,9 +31,7 @@ extern linux_wlan_t *g_linux_wlan;
 
 static struct net_device *wilc_wfi_mon; /* global monitor netdev */
 
-#if USE_WIRELESS
 extern int  mac_xmit(struct sk_buff *skb, struct net_device *dev);
-#endif
 
 
 u8 srcAdd[6];
@@ -346,7 +344,6 @@ static netdev_tx_t WILC_WFI_mon_xmit(struct sk_buff *skb,
        PRINT_INFO(HOSTAPD_DBG, "SKB netdevice name = %s\n", skb->dev->name);
        PRINT_INFO(HOSTAPD_DBG, "MONITOR real dev name = %s\n", mon_priv->real_ndev->name);
 
-       #if USE_WIRELESS
        /* Identify if Ethernet or MAC header (data or mgmt) */
        memcpy(srcAdd, &skb->data[10], 6);
        memcpy(bssid, &skb->data[16], 6);
@@ -357,7 +354,6 @@ static netdev_tx_t WILC_WFI_mon_xmit(struct sk_buff *skb,
                dev_kfree_skb(skb);
        } else
                ret = mac_xmit(skb, mon_priv->real_ndev);
-       #endif
 
        /* return NETDEV_TX_OK; */
        return ret;
@@ -388,7 +384,6 @@ static void WILC_WFI_mon_setup(struct net_device *dev)
        dev->type = ARPHRD_IEEE80211_RADIOTAP;
        eth_zero_addr(dev->dev_addr);
 
-       #ifdef USE_WIRELESS
        {
                /* u8 * mac_add; */
                unsigned char mac_add[] = {0x00, 0x50, 0xc2, 0x5e, 0x10, 0x8f};
@@ -398,9 +393,6 @@ static void WILC_WFI_mon_setup(struct net_device *dev)
                /* mac_add[ETH_ALEN-1]+=1; */
                memcpy(dev->dev_addr, mac_add, ETH_ALEN);
        }
-       #else
-       dev->dev_addr[0] = 0x12;
-       #endif
 
 }
 

diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c
index 74c70fc35478e0dea7cc9273d0c0d0e0050e5666..335335a9cae38c4f86b69e35e9b1292942f55738 100644 (file)
--- a/drivers/staging/wilc1000/linux_wlan.c
+++ b/drivers/staging/wilc1000/linux_wlan.c
@@ -2,9 +2,7 @@
 #include "linux_wlan_common.h"
 #include "wilc_wlan_if.h"
 #include "wilc_wlan.h"
-#ifdef USE_WIRELESS
 #include "wilc_wfi_cfgoperations.h"
-#endif
 
 #include "linux_wlan_common.h"
 
@@ -947,12 +945,6 @@ static int linux_wlan_init_test_config(struct net_device *dev, linux_wlan_t *p_n
        /*                    ( In BSS Station Set SSID to "" (null string)      */
        /*                      to enable Broadcast SSID suppport )              */
        /*  --------------------------------------------------------------       */
-#ifndef USE_WIRELESS
-       strcpy(c_val, "nwifi");
-       if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_SSID, c_val, (strlen(c_val) + 1), 0, 0))
-               goto _fail_;
-#endif
-
        c_val[0] = 0;
        if (!g_linux_wlan->oup.wlan_cfg_set(0, WID_BCAST_SSID, c_val, 1, 0, 0))
                goto _fail_;
@@ -1747,14 +1739,12 @@ int mac_open(struct net_device *ndev)
        priv = wiphy_priv(nic->wilc_netdev->ieee80211_ptr->wiphy);
        PRINT_D(INIT_DBG, "MAC OPEN[%p]\n", ndev);
 
-       #ifdef USE_WIRELESS
        ret = WILC_WFI_InitHostInt(ndev);
        if (ret < 0) {
                PRINT_ER("Failed to initialize host interface\n");
 
                return ret;
        }
-       #endif
 
        /*initialize platform*/
        PRINT_D(INIT_DBG, "*** re-init ***\n");
@@ -1992,20 +1982,16 @@ int mac_close(struct net_device *ndev)
                /* Stop the network interface queue */
                netif_stop_queue(nic->wilc_netdev);
 
-               #ifdef USE_WIRELESS
                WILC_WFI_DeInitHostInt(nic->wilc_netdev);
-               #endif
        }
 
        if (g_linux_wlan->open_ifcs == 0) {
                PRINT_D(GENERIC_DBG, "Deinitializing wilc1000\n");
                g_linux_wlan->close = 1;
                wilc1000_wlan_deinit(g_linux_wlan);
-               #ifdef USE_WIRELESS
                #ifdef WILC_AP_EXTERNAL_MLME
                WILC_WFI_deinit_mon_interface();
                #endif
-               #endif
        }
 
        up(&close_exit_sync);
@@ -2025,14 +2011,11 @@ int mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd)
        s32 s32Error = WILC_SUCCESS;
 
        /* struct iwreq *wrq = (struct iwreq *) req;    // tony moved to case SIOCSIWPRIV */
-       #ifdef USE_WIRELESS
        nic = netdev_priv(ndev);
 
        if (!g_linux_wlan->wilc1000_initialized)
                return 0;
 
-       #endif
-
        switch (cmd) {
 
        /* ]] 2013-06-24 */
@@ -2049,13 +2032,10 @@ int mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd)
                                return PTR_ERR(buff);
 
                        if (strncasecmp(buff, "RSSI", length) == 0) {
-
-                                       #ifdef USE_WIRELESS
                                priv = wiphy_priv(nic->wilc_netdev->ieee80211_ptr->wiphy);
                                s32Error = host_int_get_rssi(priv->hWILCWFIDrv, &(rssi));
                                if (s32Error)
                                        PRINT_ER("Failed to send get rssi param's message queue ");
-                                       #endif
                                PRINT_INFO(GENERIC_DBG, "RSSI :%d\n", rssi);
 
                                /*Rounding up the rssi negative value*/
@@ -2143,13 +2123,6 @@ void frmw_to_linux(uint8_t *buff, uint32_t size, uint32_t pkt_offset)
 
                /* nic = netdev_priv(wilc_netdev); */
 
-#ifdef USE_WIRELESS
-               /*      if(nic->monitor_flag)
-                *      {
-                *              WILC_WFI_monitor_rx(nic->wilc_netdev,skb);
-                *              return;
-                *      }*/
-#endif
                skb->protocol = eth_type_trans(skb, wilc_netdev);
                        #ifndef TCP_ENHANCEMENTS
                /*get source and dest ip addresses*/
@@ -2249,7 +2222,6 @@ int wilc_netdev_init(void)
                g_linux_wlan->u8NoIfcs++;
                ndev->netdev_ops = &wilc_netdev_ops;
 
-               #ifdef USE_WIRELESS
                {
                        struct wireless_dev *wdev;
                        /*Register WiFi*/
@@ -2275,7 +2247,6 @@ int wilc_netdev_init(void)
                        nic->netstats.tx_bytes = 0;
 
                }
-               #endif
 
                if (register_netdev(ndev)) {
                        PRINT_ER("Device couldn't be registered - %s\n", ndev->name);
@@ -2376,20 +2347,16 @@ static void __exit exit_wilc_driver(void)
                for (i = 0; i < NUM_CONCURRENT_IFC; i++) {
                        PRINT_D(INIT_DBG, "Unregistering netdev %p\n", g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
                        unregister_netdev(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
-                       #ifdef USE_WIRELESS
                        PRINT_D(INIT_DBG, "Freeing Wiphy...\n");
                        WILC_WFI_WiphyFree(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
-                       #endif
                        PRINT_D(INIT_DBG, "Freeing netdev...\n");
                        free_netdev(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
                }
        }
 
-#ifdef USE_WIRELESS
 #ifdef WILC_AP_EXTERNAL_MLME
        /* Bug 4600 : WILC_WFI_deinit_mon_interface was already called at mac_close */
        /* WILC_WFI_deinit_mon_interface(); */
-#endif
 #endif
 
        /* if(g_linux_wlan->open_ifcs==0) */

diff --git a/drivers/staging/wilc1000/wilc_wlan.c b/drivers/staging/wilc1000/wilc_wlan.c
index b0ae09d0ce1b9c4ca6d4a431510fbf2bb34ac255..4c54ea7aa442f83fcc60617f885c2684e6e81b2a 100644 (file)
--- a/drivers/staging/wilc1000/wilc_wlan.c
+++ b/drivers/staging/wilc1000/wilc_wlan.c
@@ -1230,11 +1230,7 @@ static void wilc_wlan_handle_rxq(void)
                                /* reset mgmt indicator bit, to use pkt_offeset in furthur calculations */
                                pkt_offset &= ~(IS_MANAGMEMENT | IS_MANAGMEMENT_CALLBACK | IS_MGMT_STATUS_SUCCES);
 
-#ifdef USE_WIRELESS
                                WILC_WFI_mgmt_rx(&buffer[offset + HOST_HDR_OFFSET], pkt_len);
-
-#endif
-
                        }
                        /* BUG4530 fix */
                        else