ncr5380: Standardize reselection handling

Bring the two NCR5380_reselect() implementations into agreement.

Replace infinite loops in atari_NCR5380.c with timeouts, as per NCR5380.c.

Remove 'abort' flag in NCR5380.c as per atari_NCR5380.c -- if reselection
fails, there may be no MESSAGE IN phase so don't attempt data transfer.

During selection, don't interfere with the chip registers after a
reselection interrupt intervenes.

Clean up some trivial issues with code style, comments and printk.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index ffa3719312d11d6cae92ab5dd7a4c2449ce1c67e..78cf970e13ba0f28f434e94e85a4ea04af5c7575 100644 (file)
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -1182,6 +1182,10 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
        else
                udelay(2);
 
+       /* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
+       if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
+               return -1;
+
        dprintk(NDEBUG_ARBITRATION, "scsi%d : won arbitration\n", instance->host_no);
 
        /* 
@@ -1953,12 +1957,14 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
                                                cmd->scsi_done(cmd);
                                        }
 
-                                       NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
                                        /* 
                                         * Restore phase bits to 0 so an interrupted selection, 
                                         * arbitration can resume.
                                         */
                                        NCR5380_write(TARGET_COMMAND_REG, 0);
+
+                                       /* Enable reselect interrupts */
+                                       NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
                                        return;
                                case MESSAGE_REJECT:
                                        /* Accept message by clearing ACK */
@@ -2144,7 +2150,6 @@ static void NCR5380_reselect(struct Scsi_Host *instance) {
        unsigned char msg[3];
        unsigned char *data;
        struct scsi_cmnd *tmp = NULL, *prev;
-       int abort = 0;
 
        /*
         * Disable arbitration, etc. since the host adapter obviously
@@ -2154,7 +2159,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance) {
        NCR5380_write(MODE_REG, MR_BASE);
 
        target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
-       dprintk(NDEBUG_SELECTION, "scsi%d : reselect\n", instance->host_no);
+       dprintk(NDEBUG_RESELECTION, "scsi%d : reselect\n", instance->host_no);
 
        /* 
         * At this point, we have detected that our SCSI ID is on the bus,
@@ -2166,77 +2171,85 @@ static void NCR5380_reselect(struct Scsi_Host *instance) {
         */
 
        NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
-
-       /* FIXME: timeout too long, must fail to workqueue */   
-       if(NCR5380_poll_politely(instance, STATUS_REG, SR_SEL, 0, 2*HZ)<0)
-               abort = 1;
-               
+       if (NCR5380_poll_politely(instance,
+                                 STATUS_REG, SR_SEL, 0, 2 * HZ) < 0) {
+               NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+               return;
+       }
        NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
 
        /*
         * Wait for target to go into MSGIN.
-        * FIXME: timeout needed and fail to work queeu
         */
 
        if (NCR5380_poll_politely(instance,
-                                 STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0)
-               abort = 1;
+                                 STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
+               do_abort(instance);
+               return;
+       }
 
        len = 1;
        data = msg;
        phase = PHASE_MSGIN;
        NCR5380_transfer_pio(instance, &phase, &len, &data);
 
+       if (len) {
+               do_abort(instance);
+               return;
+       }
+
        if (!(msg[0] & 0x80)) {
-               printk(KERN_ERR "scsi%d : expecting IDENTIFY message, got ", instance->host_no);
+               shost_printk(KERN_ERR, instance, "expecting IDENTIFY message, got ");
                spi_print_msg(msg);
-               abort = 1;
-       } else {
-               /* Accept message by clearing ACK */
-               NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-               lun = (msg[0] & 0x07);
-
-               /* 
-                * We need to add code for SCSI-II to track which devices have
-                * I_T_L_Q nexuses established, and which have simple I_T_L
-                * nexuses so we can chose to do additional data transfer.
-                */
+               printk("\n");
+               do_abort(instance);
+               return;
+       }
+       lun = msg[0] & 0x07;
 
-               /* 
-                * Find the command corresponding to the I_T_L or I_T_L_Q  nexus we 
-                * just reestablished, and remove it from the disconnected queue.
-                */
+       /*
+        * We need to add code for SCSI-II to track which devices have
+        * I_T_L_Q nexuses established, and which have simple I_T_L
+        * nexuses so we can chose to do additional data transfer.
+        */
 
+       /*
+        * Find the command corresponding to the I_T_L or I_T_L_Q  nexus we
+        * just reestablished, and remove it from the disconnected queue.
+        */
 
-               for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble)
-                       if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun)
-                           ) {
-                               if (prev) {
-                                       REMOVE(prev, prev->host_scribble, tmp, tmp->host_scribble);
-                                       prev->host_scribble = tmp->host_scribble;
-                               } else {
-                                       REMOVE(-1, hostdata->disconnected_queue, tmp, tmp->host_scribble);
-                                       hostdata->disconnected_queue = (struct scsi_cmnd *) tmp->host_scribble;
-                               }
-                               tmp->host_scribble = NULL;
-                               break;
+       for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL;
+            tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble) {
+               if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun)) {
+                       if (prev) {
+                               REMOVE(prev, prev->host_scribble, tmp, tmp->host_scribble);
+                               prev->host_scribble = tmp->host_scribble;
+                       } else {
+                               REMOVE(-1, hostdata->disconnected_queue, tmp, tmp->host_scribble);
+                               hostdata->disconnected_queue =
+                                       (struct scsi_cmnd *) tmp->host_scribble;
                        }
-               if (!tmp) {
-                       printk(KERN_ERR "scsi%d : warning : target bitmask %02x lun %d not in disconnect_queue.\n", instance->host_no, target_mask, lun);
-                       /* 
-                        * Since we have an established nexus that we can't do anything with,
-                        * we must abort it.  
-                        */
-                       abort = 1;
+                       tmp->host_scribble = NULL;
+                       break;
                }
        }
-
-       if (abort) {
+       if (!tmp) {
+               shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
+                            target_mask, lun);
+               /*
+                * Since we have an established nexus that we can't do anything with,
+                * we must abort it.
+                */
                do_abort(instance);
-       } else {
-               hostdata->connected = tmp;
-               dprintk(NDEBUG_RESELECTION, "scsi%d : nexus established, target = %d, lun = %llu, tag = %d\n", instance->host_no, tmp->device->id, tmp->device->lun, tmp->tag);
+               return;
        }
+
+       /* Accept message by clearing ACK */
+       NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+
+       hostdata->connected = tmp;
+       dprintk(NDEBUG_RESELECTION, "scsi%d : nexus established, target = %d, lun = %llu, tag = %d\n",
+               instance->host_no, tmp->device->id, tmp->device->lun, tmp->tag);
 }
 
 /*

diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 70398c61fffc832e9d0391c2fccf09fe2387a18e..214f43b4baad933c113a5454a33daef290c55b0c 100644 (file)
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -1446,11 +1446,9 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
        else
                udelay(2);
 
-       if (hostdata->connected) {
-               NCR5380_write(MODE_REG, MR_BASE);
-               NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+       /* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
+       if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
                return -1;
-       }
 
        dprintk(NDEBUG_ARBITRATION, "scsi%d: won arbitration\n", HOSTNO);
 
@@ -2223,13 +2221,15 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
                                                cmd->scsi_done(cmd);
                                        }
 
-                                       NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
                                        /*
                                         * Restore phase bits to 0 so an interrupted selection,
                                         * arbitration can resume.
                                         */
                                        NCR5380_write(TARGET_COMMAND_REG, 0);
 
+                                       /* Enable reselect interrupts */
+                                       NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+
                                        /* ++roman: For Falcon SCSI, release the lock on the
                                         * ST-DMA here if no other commands are waiting on the
                                         * disconnected queue.
@@ -2482,17 +2482,22 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
         */
 
        NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
-
-       while (NCR5380_read(STATUS_REG) & SR_SEL)
-               ;
+       if (NCR5380_poll_politely(instance,
+                                 STATUS_REG, SR_SEL, 0, 2 * HZ) < 0) {
+               NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+               return;
+       }
        NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
 
        /*
         * Wait for target to go into MSGIN.
         */
 
-       while (!(NCR5380_read(STATUS_REG) & SR_REQ))
-               ;
+       if (NCR5380_poll_politely(instance,
+                                 STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
+               do_abort(instance);
+               return;
+       }
 
 #if defined(CONFIG_SUN3) && defined(REAL_DMA)
        /* acknowledge toggle to MSGIN */
@@ -2505,15 +2510,21 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
        data = msg;
        phase = PHASE_MSGIN;
        NCR5380_transfer_pio(instance, &phase, &len, &data);
+
+       if (len) {
+               do_abort(instance);
+               return;
+       }
 #endif
 
        if (!(msg[0] & 0x80)) {
-               printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO);
+               shost_printk(KERN_ERR, instance, "expecting IDENTIFY message, got ");
                spi_print_msg(msg);
+               printk("\n");
                do_abort(instance);
                return;
        }
-       lun = (msg[0] & 0x07);
+       lun = msg[0] & 0x07;
 
 #if defined(SUPPORT_TAGS) && !defined(CONFIG_SUN3)
        /* If the phase is still MSGIN, the target wants to send some more
@@ -2541,7 +2552,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 
        for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL;
             tmp; prev = tmp, tmp = NEXT(tmp)) {
-               if ((target_mask == (1 << tmp->device->id)) && (lun == tmp->device->lun)
+               if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun)
 #ifdef SUPPORT_TAGS
                    && (tag == tmp->tag)
 #endif
@@ -2559,16 +2570,13 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
        }
 
        if (!tmp) {
-               printk(KERN_WARNING "scsi%d: warning: target bitmask %02x lun %d "
 #ifdef SUPPORT_TAGS
-                      "tag %d "
-#endif
-                      "not in disconnected_queue.\n",
-                      HOSTNO, target_mask, lun
-#ifdef SUPPORT_TAGS
-                      , tag
+               shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d tag %d not in disconnected queue.\n",
+                            target_mask, lun, tag);
+#else
+               shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
+                            target_mask, lun);
 #endif
-                       );
                /*
                 * Since we have an established nexus that we can't do anything
                 * with, we must abort it.