[MTD] [NAND] S3C2410 Large page NAND support

This adds support for using large page NAND devices
with the S3C24XX NAND controller. This also adds the
file Documentation/arm/Samsung-S3C24XX/NAND.txt to
describe the differences.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

diff --git a/Documentation/arm/Samsung-S3C24XX/NAND.txt b/Documentation/arm/Samsung-S3C24XX/NAND.txt
new file mode 100644 (file)
index 0000000..bc478a3
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/NAND.txt
@@ -0,0 +1,30 @@
+                       S3C24XX NAND Support
+                       ====================
+
+Introduction
+------------
+
+Small Page NAND
+---------------
+
+The driver uses a 512 byte (1 page) ECC code for this setup. The
+ECC code is not directly compatible with the default kernel ECC
+code, so the driver enforces its own OOB layout and ECC parameters
+
+Large Page NAND
+---------------
+
+The driver is capable of handling NAND flash with a 2KiB page
+size, with support for hardware ECC generation and correction.
+
+Unlike the 512byte page mode, the driver generates ECC data for
+each 256 byte block in an 2KiB page. This means that more than
+one error in a page can be rectified. It also means that the
+OOB layout remains the default kernel layout for these flashes.
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2007 Simtec Electronics
+

diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index c31b76fa66c462601a92054221baea08643057da..d04e1e30c47f8ff1a8613a369506e58cf5a41a21 100644 (file)
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -156,6 +156,8 @@ NAND
   controller. If there are any problems the latest linux-mtd
   code can be found from http://www.linux-mtd.infradead.org/
 
+  For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt
+
 
 Serial
 ------

diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 8557c68dbb42e6eeb370a084ac7bfb8353cfd725..15397e0f39651f79eb1dd5e7093ff4beddbab326 100644 (file)
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -472,7 +472,7 @@ static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
        ecc_code[1] = ecc >> 8;
        ecc_code[2] = ecc >> 16;
 
-       pr_debug("%s: returning ecc %06lx\n", __func__, ecc);
+       pr_debug("%s: returning ecc %06lx\n", __func__, ecc & 0xffffff);
 
        return 0;
 }
@@ -643,9 +643,6 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
                chip->ecc.calculate = s3c2410_nand_calculate_ecc;
                chip->ecc.correct   = s3c2410_nand_correct_data;
                chip->ecc.mode      = NAND_ECC_HW;
-               chip->ecc.size      = 512;
-               chip->ecc.bytes     = 3;
-               chip->ecc.layout    = &nand_hw_eccoob;
 
                switch (info->cpu_type) {
                case TYPE_S3C2410:
@@ -669,6 +666,34 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
        }
 }
 
+/* s3c2410_nand_update_chip
+ *
+ * post-probe chip update, to change any items, such as the
+ * layout for large page nand
+ */
+
+static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
+                                    struct s3c2410_nand_mtd *nmtd)
+{
+       struct nand_chip *chip = &nmtd->chip;
+
+       printk("%s: chip %p: %d\n", __func__, chip, chip->page_shift);
+
+       if (hardware_ecc) {
+               /* change the behaviour depending on wether we are using
+                * the large or small page nand device */
+
+               if (chip->page_shift > 10) {
+                       chip->ecc.size      = 256;
+                       chip->ecc.bytes     = 3;
+               } else {
+                       chip->ecc.size      = 512;
+                       chip->ecc.bytes     = 3;
+                       chip->ecc.layout    = &nand_hw_eccoob;
+               }
+       }
+}
+
 /* s3c2410_nand_probe
  *
  * called by device layer when it finds a device matching
@@ -775,9 +800,12 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 
                s3c2410_nand_init_chip(info, nmtd, sets);
 
-               nmtd->scan_res = nand_scan(&nmtd->mtd, (sets) ? sets->nr_chips : 1);
+               nmtd->scan_res = nand_scan_ident(&nmtd->mtd,
+                                                (sets) ? sets->nr_chips : 1);
 
                if (nmtd->scan_res == 0) {
+                       s3c2410_nand_update_chip(info, nmtd);
+                       nand_scan_tail(&nmtd->mtd);
                        s3c2410_nand_add_partition(info, nmtd, sets);
                }