clk: vc5: Configure the output buffer input mux on prepare
authorMarek Vasut <marek.vasut@gmail.com>
Sun, 9 Jul 2017 13:28:10 +0000 (15:28 +0200)
committerStephen Boyd <sboyd@codeaurora.org>
Mon, 17 Jul 2017 18:50:59 +0000 (11:50 -0700)
The output buffer input mux can be configured in either of three
states -- disabled, input from FOD, input from previous output.
Once the .prepare() callback of the output buffer is called, the
output buffer input mux must be set to either input from FOD or
input from previous output, it cannot be set to Disabled anymore
or the output won't work.

Default to the input from FOD if the output buffer input mux was
Disabled and the .prepare() was called on it.

Note that we do not set the output buffer input mux back to Disabled
in the .unprepare() callback as there is no obvious benefit of doing
so. We disable the entire output buffer in the .unprepare() callback
already.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Alexey Firago <alexey_firago@mentor.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # Salvator-XS with the display LVDS output.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
drivers/clk/clk-versaclock5.c

index 185d7a5d36e06c2bd3ad506d9d52b13fa5b60eec..29df1100f96d8d8fe4a6c81d637b58c3c9e29e9f 100644 (file)
@@ -507,6 +507,25 @@ static int vc5_clk_out_prepare(struct clk_hw *hw)
 {
        struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
        struct vc5_driver_data *vc5 = hwdata->vc5;
+       const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM |
+                       VC5_OUT_DIV_CONTROL_SEL_EXT |
+                       VC5_OUT_DIV_CONTROL_EN_FOD;
+       unsigned int src;
+       int ret;
+
+       /*
+        * If the input mux is disabled, enable it first and
+        * select source from matching FOD.
+        */
+       regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src);
+       if ((src & mask) == 0) {
+               src = VC5_OUT_DIV_CONTROL_RESET | VC5_OUT_DIV_CONTROL_EN_FOD;
+               ret = regmap_update_bits(vc5->regmap,
+                                        VC5_OUT_DIV_CONTROL(hwdata->num),
+                                        mask | VC5_OUT_DIV_CONTROL_RESET, src);
+               if (ret)
+                       return ret;
+       }
 
        /* Enable the clock buffer */
        regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),