drm/nv50: fix DP->DVI if output has been programmed for native DP previously
authorBen Skeggs <bskeggs@redhat.com>
Wed, 30 Jun 2010 05:25:57 +0000 (15:25 +1000)
committerBen Skeggs <bskeggs@redhat.com>
Tue, 13 Jul 2010 00:13:12 +0000 (10:13 +1000)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drivers/gpu/drm/nouveau/nouveau_reg.h
drivers/gpu/drm/nouveau/nv50_display.c

index 6ca80a3fe70db02084ed9730fe857b92345dd16f..b6391a132f0a509336caef371be81b184f97fbbc 100644 (file)
 #define NV50_PDISPLAY_SOR_BACKLIGHT_ENABLE                           0x80000000
 #define NV50_PDISPLAY_SOR_BACKLIGHT_LEVEL                            0x00000fff
 #define NV50_SOR_DP_CTRL(i,l)            (0x0061c10c + (i) * 0x800 + (l) * 0x80)
+#define NV50_SOR_DP_CTRL_ENABLED                                     0x00000001
 #define NV50_SOR_DP_CTRL_ENHANCED_FRAME_ENABLED                      0x00004000
 #define NV50_SOR_DP_CTRL_LANE_MASK                                   0x001f0000
 #define NV50_SOR_DP_CTRL_LANE_0_ENABLED                              0x00010000
index e031904ef7a78407115dec45110d9d74637718de..0c762049cb68b41ba71e07d0774eab33aa4f759b 100644 (file)
@@ -821,6 +821,36 @@ nv50_display_unk20_dp_hack(struct drm_device *dev, struct dcb_entry *dcb)
        }
 }
 
+/* If programming a TMDS output on a SOR that can also be configured for
+ * DisplayPort, make sure NV50_SOR_DP_CTRL_ENABLE is forced off.
+ *
+ * It looks like the VBIOS TMDS scripts make an attempt at this, however,
+ * the VBIOS scripts on at least one board I have only switch it off on
+ * link 0, causing a blank display if the output has previously been
+ * programmed for DisplayPort.
+ */
+static void
+nv50_display_unk20_dp_set_tmds(struct drm_device *dev, struct dcb_entry *dcb)
+{
+       int or = ffs(dcb->or) - 1, link = !(dcb->dpconf.sor.link & 1);
+       struct drm_encoder *encoder;
+       u32 tmp;
+
+       if (dcb->type != OUTPUT_TMDS)
+               return;
+
+       list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+               struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+               if (nv_encoder->dcb->type == OUTPUT_DP) {
+                       tmp  = nv_rd32(dev, NV50_SOR_DP_CTRL(or, link));
+                       tmp &= ~NV50_SOR_DP_CTRL_ENABLED;
+                       nv_wr32(dev, NV50_SOR_DP_CTRL(or, link), tmp);
+                       break;
+               }
+       }
+}
+
 static void
 nv50_display_unk20_handler(struct drm_device *dev)
 {
@@ -845,6 +875,7 @@ nv50_display_unk20_handler(struct drm_device *dev)
        nouveau_bios_run_display_table(dev, dcbent, script, pclk);
 
        nv50_display_unk20_dp_hack(dev, dcbent);
+       nv50_display_unk20_dp_set_tmds(dev, dcbent);
 
        tmp = nv_rd32(dev, NV50_PDISPLAY_CRTC_CLK_CTRL2(head));
        tmp &= ~0x000000f;