performance.
config BLK_DEV_IDE_PMAC_BLINK
- bool "Blink laptop LED on drive activity"
+ bool "Blink laptop LED on drive activity (DEPRECATED)"
depends on BLK_DEV_IDE_PMAC && ADB_PMU
+ select ADB_PMU_LED
+ select LEDS_TRIGGERS
+ select LEDS_TRIGGER_IDE_DISK
help
This option enables the use of the sleep LED as a hard drive
activity LED.
+ This option is deprecated, it only selects ADB_PMU_LED and
+ LEDS_TRIGGER_IDE_DISK and changes the code in the new led class
+ device to default to the ide-disk trigger (which should be set
+ from userspace via sysfs).
config BLK_DEV_IDE_SWARM
tristate "IDE for Sibyte evaluation boards"
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-/*
- * Below is the code for blinking the laptop LED along with hard
- * disk activity.
- */
-
-#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
-
-/* Set to 50ms minimum led-on time (also used to limit frequency
- * of requests sent to the PMU
- */
-#define PMU_HD_BLINK_TIME (HZ/50)
-
-static struct adb_request pmu_blink_on, pmu_blink_off;
-static spinlock_t pmu_blink_lock;
-static unsigned long pmu_blink_stoptime;
-static int pmu_blink_ledstate;
-static struct timer_list pmu_blink_timer;
-static int pmu_ide_blink_enabled;
-
-
-static void
-pmu_hd_blink_timeout(unsigned long data)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&pmu_blink_lock, flags);
-
- /* We may have been triggered again in a racy way, check
- * that we really want to switch it off
- */
- if (time_after(pmu_blink_stoptime, jiffies))
- goto done;
-
- /* Previous req. not complete, try 100ms more */
- if (pmu_blink_off.complete == 0)
- mod_timer(&pmu_blink_timer, jiffies + PMU_HD_BLINK_TIME);
- else if (pmu_blink_ledstate) {
- pmu_request(&pmu_blink_off, NULL, 4, 0xee, 4, 0, 0);
- pmu_blink_ledstate = 0;
- }
-done:
- spin_unlock_irqrestore(&pmu_blink_lock, flags);
-}
-
-static void
-pmu_hd_kick_blink(void *data, int rw)
-{
- unsigned long flags;
-
- pmu_blink_stoptime = jiffies + PMU_HD_BLINK_TIME;
- wmb();
- mod_timer(&pmu_blink_timer, pmu_blink_stoptime);
- /* Fast path when LED is already ON */
- if (pmu_blink_ledstate == 1)
- return;
- spin_lock_irqsave(&pmu_blink_lock, flags);
- if (pmu_blink_on.complete && !pmu_blink_ledstate) {
- pmu_request(&pmu_blink_on, NULL, 4, 0xee, 4, 0, 1);
- pmu_blink_ledstate = 1;
- }
- spin_unlock_irqrestore(&pmu_blink_lock, flags);
-}
-
-static int
-pmu_hd_blink_init(void)
-{
- struct device_node *dt;
- const char *model;
-
- /* Currently, I only enable this feature on KeyLargo based laptops,
- * older laptops may support it (at least heathrow/paddington) but
- * I don't feel like loading those venerable old machines with so
- * much additional interrupt & PMU activity...
- */
- if (pmu_get_model() != PMU_KEYLARGO_BASED)
- return 0;
-
- dt = of_find_node_by_path("/");
- if (dt == NULL)
- return 0;
- model = (const char *)get_property(dt, "model", NULL);
- if (model == NULL)
- return 0;
- if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 &&
- strncmp(model, "iBook", strlen("iBook")) != 0) {
- of_node_put(dt);
- return 0;
- }
- of_node_put(dt);
-
- pmu_blink_on.complete = 1;
- pmu_blink_off.complete = 1;
- spin_lock_init(&pmu_blink_lock);
- init_timer(&pmu_blink_timer);
- pmu_blink_timer.function = pmu_hd_blink_timeout;
-
- return 1;
-}
-
-#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */
-
/*
* N.B. this can't be an initfunc, because the media-bay task can
* call ide_[un]register at any time.
pmif->timings[0] = 0;
pmif->timings[1] = 0;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
- /* Note: This code will be called for every hwif, thus we'll
- * try several time to stop the LED blinker timer, but that
- * should be harmless
- */
- if (pmu_ide_blink_enabled) {
- unsigned long flags;
-
- /* Make sure we don't hit the PMU blink */
- spin_lock_irqsave(&pmu_blink_lock, flags);
- if (pmu_blink_ledstate)
- del_timer(&pmu_blink_timer);
- pmu_blink_ledstate = 0;
- spin_unlock_irqrestore(&pmu_blink_lock, flags);
- }
-#endif /* CONFIG_BLK_DEV_IDE_PMAC_BLINK */
-
disable_irq(pmif->irq);
/* The media bay will handle itself just fine */
hwif->selectproc = pmac_ide_selectproc;
hwif->speedproc = pmac_ide_tune_chipset;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
- pmu_ide_blink_enabled = pmu_hd_blink_init();
-
- if (pmu_ide_blink_enabled)
- hwif->led_act = pmu_hd_kick_blink;
-#endif
-
printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
pmif->mediabay ? " (mediabay)" : "", hwif->irq);
this device; you should do so if your machine is one of those
mentioned above.
+config ADB_PMU_LED
+ bool "Support for the Power/iBook front LED"
+ depends on ADB_PMU
+ select LEDS_CLASS
+ help
+ Support the front LED on Power/iBooks as a generic LED that can
+ be triggered by any of the supported triggers. To get the
+ behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
+ and the ide-disk LED trigger and configure appropriately through
+ sysfs.
+
config PMAC_SMU
bool "Support for SMU based PowerMacs"
depends on PPC_PMAC64
obj-$(CONFIG_ANSLCD) += ans-lcd.o
obj-$(CONFIG_ADB_PMU) += via-pmu.o via-pmu-event.o
+obj-$(CONFIG_ADB_PMU_LED) += via-pmu-led.o
obj-$(CONFIG_PMAC_BACKLIGHT) += via-pmu-backlight.o
obj-$(CONFIG_ADB_CUDA) += via-cuda.o
obj-$(CONFIG_PMAC_APM_EMU) += apm_emu.o
--- /dev/null
+/*
+ * via-pmu LED class device
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/leds.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <asm/prom.h>
+
+static spinlock_t pmu_blink_lock;
+static struct adb_request pmu_blink_req;
+/* -1: no change, 0: request off, 1: request on */
+static int requested_change;
+static int sleeping;
+
+static void pmu_req_done(struct adb_request * req)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_blink_lock, flags);
+ /* if someone requested a change in the meantime
+ * (we only see the last one which is fine)
+ * then apply it now */
+ if (requested_change != -1 && !sleeping)
+ pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change);
+ /* reset requested change */
+ requested_change = -1;
+ spin_unlock_irqrestore(&pmu_blink_lock, flags);
+}
+
+static void pmu_led_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_blink_lock, flags);
+ switch (brightness) {
+ case LED_OFF:
+ requested_change = 0;
+ break;
+ case LED_FULL:
+ requested_change = 1;
+ break;
+ default:
+ goto out;
+ break;
+ }
+ /* if request isn't done, then don't do anything */
+ if (pmu_blink_req.complete && !sleeping)
+ pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change);
+ out:
+ spin_unlock_irqrestore(&pmu_blink_lock, flags);
+}
+
+static struct led_classdev pmu_led = {
+ .name = "pmu-front-led",
+#ifdef CONFIG_BLK_DEV_IDE_PMAC_BLINK
+ .default_trigger = "ide-disk",
+#endif
+ .brightness_set = pmu_led_set,
+};
+
+#ifdef CONFIG_PM
+static int pmu_led_sleep_call(struct pmu_sleep_notifier *self, int when)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_blink_lock, flags);
+
+ switch (when) {
+ case PBOOK_SLEEP_REQUEST:
+ sleeping = 1;
+ break;
+ case PBOOK_WAKE:
+ sleeping = 0;
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ spin_unlock_irqrestore(&pmu_blink_lock, flags);
+
+ return PBOOK_SLEEP_OK;
+}
+
+static struct pmu_sleep_notifier via_pmu_led_sleep_notif = {
+ .notifier_call = pmu_led_sleep_call,
+};
+#endif
+
+static int __init via_pmu_led_init(void)
+{
+ struct device_node *dt;
+ const char *model;
+
+ /* only do this on keylargo based models */
+ if (pmu_get_model() != PMU_KEYLARGO_BASED)
+ return -ENODEV;
+
+ dt = of_find_node_by_path("/");
+ if (dt == NULL)
+ return -ENODEV;
+ model = (const char *)get_property(dt, "model", NULL);
+ if (model == NULL)
+ return -ENODEV;
+ if (strncmp(model, "PowerBook", strlen("PowerBook")) != 0 &&
+ strncmp(model, "iBook", strlen("iBook")) != 0) {
+ of_node_put(dt);
+ /* ignore */
+ return -ENODEV;
+ }
+ of_node_put(dt);
+
+ spin_lock_init(&pmu_blink_lock);
+ /* no outstanding req */
+ pmu_blink_req.complete = 1;
+ pmu_blink_req.done = pmu_req_done;
+#ifdef CONFIG_PM
+ pmu_register_sleep_notifier(&via_pmu_led_sleep_notif);
+#endif
+ return led_classdev_register(NULL, &pmu_led);
+}
+
+late_initcall(via_pmu_led_init);
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff