serial: refactor ASYNC_ flags

Define ASYNCB_* flags which are bit numbers of the ASYNC_* flags.
This is useful for {test,set,clear}_bit.

Also convert each ASYNC_% to be (1 << ASYNCB_%) and define masks
with the macros, not constants.

Tested with:
#include "PATH_TO_KERNEL/include/linux/serial.h"
static struct {
        unsigned int new, old;
} as[] = {
        { ASYNC_HUP_NOTIFY, 0x0001 },
        { ASYNC_FOURPORT, 0x0002 },
...
	{ ASYNC_BOOT_ONLYMCA, 0x00400000 },
        { ASYNC_INTERNAL_FLAGS, 0xFFC00000 }
};
...
        for (a = 0; a < ARRAY_SIZE(as); a++)
                if (as[a].old != as[a].new)
                        printf("%.8x != %.8x\n", as[a].old, as[a].new);

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/include/linux/serial.h b/include/linux/serial.h
index 9136cc5608c3df2b15145ab7f1fbe09c966fd8f9..e5bb75a6380219256c52dce6c75be8aebddb2aaf 100644 (file)
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -96,54 +96,76 @@ struct serial_uart_config {
 
 /*
  * Definitions for async_struct (and serial_struct) flags field
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
  */
-#define ASYNC_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes 
-                                  on the callout port */
-#define ASYNC_FOURPORT  0x0002 /* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNC_SAK      0x0004  /* Secure Attention Key (Orange book) */
-#define ASYNC_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
-
-#define ASYNC_SPD_MASK 0x1030
-#define ASYNC_SPD_HI   0x0010  /* Use 56000 instead of 38400 bps */
-
-#define ASYNC_SPD_VHI  0x0020  /* Use 115200 instead of 38400 bps */
-#define ASYNC_SPD_CUST 0x0030  /* Use user-specified divisor */
-
-#define ASYNC_SKIP_TEST        0x0040 /* Skip UART test during autoconfiguration */
-#define ASYNC_AUTO_IRQ  0x0080 /* Do automatic IRQ during autoconfiguration */
-#define ASYNC_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
-#define ASYNC_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
-#define ASYNC_CALLOUT_NOHUP   0x0400 /* Don't do hangups for cua device */
-
-#define ASYNC_HARDPPS_CD       0x0800  /* Call hardpps when CD goes high  */
-
-#define ASYNC_SPD_SHI  0x1000  /* Use 230400 instead of 38400 bps */
-#define ASYNC_SPD_WARP 0x1010  /* Use 460800 instead of 38400 bps */
-
-#define ASYNC_LOW_LATENCY 0x2000 /* Request low latency behaviour */
-
-#define ASYNC_BUGGY_UART  0x4000 /* This is a buggy UART, skip some safety
-                                 * checks.  Note: can be dangerous! */
-
-#define ASYNC_AUTOPROBE         0x8000 /* Port was autoprobed by PCI or PNP code */
-
-#define ASYNC_FLAGS    0x7FFF  /* Possible legal async flags */
-#define ASYNC_USR_MASK 0x3430  /* Legal flags that non-privileged
-                                * users can set or reset */
-
-/* Internal flags used only by kernel/chr_drv/serial.c */
-#define ASYNC_INITIALIZED      0x80000000 /* Serial port was initialized */
-#define ASYNC_NORMAL_ACTIVE    0x20000000 /* Normal device is active */
-#define ASYNC_BOOT_AUTOCONF    0x10000000 /* Autoconfigure port on bootup */
-#define ASYNC_CLOSING          0x08000000 /* Serial port is closing */
-#define ASYNC_CTS_FLOW         0x04000000 /* Do CTS flow control */
-#define ASYNC_CHECK_CD         0x02000000 /* i.e., CLOCAL */
-#define ASYNC_SHARE_IRQ                0x01000000 /* for multifunction cards
-                                            --- no longer used */
-#define ASYNC_CONS_FLOW                0x00800000 /* flow control for console  */
-
-#define ASYNC_BOOT_ONLYMCA     0x00400000 /* Probe only if MCA bus */
-#define ASYNC_INTERNAL_FLAGS   0xFFC00000 /* Internal flags */
+#define ASYNCB_HUP_NOTIFY       0 /* Notify getty on hangups and closes
+                                   * on the callout port */
+#define ASYNCB_FOURPORT                 1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK              2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS    3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI           4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI          5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST        6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ                 7 /* Do automatic IRQ during
+                                   * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT  8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT     9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP   10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD      11 /* Call hardpps when CD goes high  */
+#define ASYNCB_SPD_SHI         12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY     13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART      14 /* This is a buggy UART, skip some safety
+                                   * checks.  Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE       15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER       15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED     31 /* Serial port was initialized */
+#define ASYNCB_NORMAL_ACTIVE   29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF   28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING         27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW                26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD                25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ       24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW       23 /* flow control for console  */
+#define ASYNCB_BOOT_ONLYMCA    22 /* Probe only if MCA bus */
+#define ASYNCB_FIRST_KERNEL    22
+
+#define ASYNC_HUP_NOTIFY       (1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_FOURPORT         (1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK              (1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS    (1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI           (1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI          (1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST                (1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ         (1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT  (1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT     (1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP    (1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD       (1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI          (1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY      (1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART       (1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE                (1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS            ((1U << ASYNCB_LAST_USER) - 1)
+#define ASYNC_USR_MASK         (ASYNC_SPD_HI|ASYNC_SPD_VHI| \
+               ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST         (ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP         (ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK         (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED      (1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE    (1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF    (1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING          (1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW         (1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD         (1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ                (1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW                (1U << ASYNCB_CONS_FLOW)
+#define ASYNC_BOOT_ONLYMCA     (1U << ASYNCB_BOOT_ONLYMCA)
+#define ASYNC_INTERNAL_FLAGS   (~((1U << ASYNCB_FIRST_KERNEL) - 1))
 
 /*
  * Multiport serial configuration structure --- external structure