powerpc/85xx: Enable USB2 controller node for P1020RDB

Enable USB2 controller node for P1020RDB. USB2 controller is used only
when board boots from SPI or SD as it is muxed with eLBC

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi
index b5bd86f4baf21b810f4b38fef873b7e4775eb00e..17559c4dc5d82c103d4ab7bd254625385f2383dd 100644 (file)
--- a/arch/powerpc/boot/dts/p1020rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1020rdb.dtsi
@@ -1,7 +1,7 @@
 /*
  * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -192,15 +192,12 @@
                phy_type = "ulpi";
        };
 
-       /* USB2 is shared with localbus, so it must be disabled
-          by default. We can't put 'status = "disabled";' here
-          since U-Boot doesn't clear the status property when
-          it enables USB2. OTOH, U-Boot does create a new node
-          when there isn't any. So, just comment it out.
+       /* USB2 is shared with localbus. It is used
+          only in case of SPI and SD boot after
+          appropriate device-tree fixup done by uboot */
        usb@23000 {
                phy_type = "ulpi";
        };
-       */
 
        mdio@24000 {
                phy0: ethernet-phy@0 {